Marcy 150lb Stack Weight Home Gym MWM-4965SC Assembly Help Video
HTML-код
- Опубликовано: 17 янв 2022
- The Marcy 150lb Stack Weight Home Gym MWM-4965SC Assembly Help Video is intended to supplement the MWM-4965SC Assembly Manual included with the MWM-4965.
Available for purchase: bit.ly/MWM-4965-PRO
Assembly manual: bit.ly/MWM-4965-AM
Assembly:
[0:05] - Rear Stabilizer, Guide Rod, Weight Plate Rubber Bumper
[0:16] - Base Frame & U-Shaped Bracket
[0:28] - Foot Plate and Foot Plate Tube
[0:40] - Vertical Frame
[0:56] - Leg Developer Holder
[1:12] - Seat Support
[1:31] - Weight Plates
[2:00] - Selector Rod (smaller weight plate), Selector Rod, Weight Selector Pin
[2:15] - Upper Frame
[2:43] - Front Press Base & Front Press Axle
[2:58] - Right and Left Butterfly, Front Press Handle, Large Foam Roll
[3:26] - Front Press Base, Left & Right Butterfly
[3:40] - Backrest Board & Seat Pad
[3:59] - Leg Developer
[4:13] - Foam Tube & Foam Rolls
[4:24] - Swivel Pulley Bracket
[4:54] - Weight Stack Cover, Upper Frame, Weight Stack Cover Bracket
Cable & Pulley Set Up
[5:20] - Upper Cable
[5:34] - Upper Cable to Selector Rod
[5:44] - Pulley Assembly (For Upper Cable)
[7:11] - Butterfly Cable
[7:57] - Lower Cable
[8:19] - Ball Stopper (For Lower Cable) & U-Shaped Buckle
[8:29] - Pulley Assembly (For Lower Cable)
[9:56] - Chain Assembly
-----------------------------------------------------------------------
Connect with us:
🔴 Website: www.marcypro.com/
🔴 Instagram: / marcyfitness
🔴 Facebook: / marcyfitnessus
🔴 Twitter: marcyfitness?lang=en 
Хобби
Great video! I didn't even go through the assembly instruction book. When I decided to get this model, all I gone through was this video to prepare myself to assemble. I started assembling, seeing this video, at 4:30 pm and done by 7:30 pm, took 3 hrs to put it together since I was doing it alone and slowly to make sure I am not skipping any steps. Came up perfectly with all the parts needed and made my assembly easy! Thank you very much!
Hello Nathan Krishnamurthy - thank you for your message. We are happy to hear it! Thank you for supporting Marcy products, have an awesome day!
Great video.... i took it apart from someone who gave it to me. This video is so helpful
Hello @Hugo Correa - Glad to hear it! Thank you for your support!
If you have any questions please feel free to contact us at marcypro.com/ - Have an awesome day!
Do you have a video like this to show how to set up the hg5000
Assembly:
[0:05] - Rear Stabilizer, Guide Rod, Weight Plate Rubber Bumper
[0:16] - Base Frame & U-Shaped Bracket
[0:28] - Foot Plate and Foot Plate Tube
[0:40] - Vertical Frame
[0:56] - Leg Developer Holder
[1:12] - Seat Support
[1:31] - Weight Plates
[2:00] - Selector Rod (smaller weight plate), Selector Rod, Weight Selector Pin
[2:15] - Upper Frame
[2:43] - Front Press Base & Front Press Axle
[2:58] - Right and Left Butterfly, Front Press Handle, Large Foam Roll
[3:26] - Front Press Base, Left & Right Butterfly
[3:40] - Backrest Board & Seat Pad
[3:59] - Leg Developer
[4:13] - Foam Tube & Foam Rolls
[4:24] - Swivel Pulley Bracket
[4:54] - Weight Stack Cover, Upper Frame, Weight Stack Cover Bracket
Cable & Pulley Set Up
[5:20] - Upper Cable
[5:34] - Upper Cable to Selector Rod
[5:44] - Pulley Assembly (For Upper Cable)
[7:11] - Butterfly Cable
[7:57] - Lower Cable
[8:19] - Ball Stopper (For Lower Cable) & U-Shaped Buckle
[8:29] - Pulley Assembly (For Lower Cable)
[9:56] - Chain Assembly
I love mine !
Hello Cory Bourrier - We're glad to hear it! Feel free to tag us on Instagram / Facebook / Twitter posts when working out on tand we'll reshare when we can.
Thanks for the support, have an awesome day!
Thanks.. Awesome video.. Took 4 hours to put together. Only using the video. Was nervous about the holes and pin left over. Then realized it's for the lock 👍👍👍
Hello Chrystian Tyler - We're glad to hear it helped!
Don't forget to tag us in your workout photos on Instagram / Facebook / Twitter for the chance to be featured!
Thank you for supporting Marcy products, have an awesome day!
It has taken me 2 days and I'm not even to the pulleys!! Can't find an emoji for pulling my hair out. But getting a he'll of a work out because I didn't know to put the largest groove down instead of up. Another day tomorrow. Hope I can finally get it done!
@@MarcyFitness
@@nativetexan6628 We are sorry to hear you're having trouble with assembly! If you find you still need help, customer reps are available at marcypro.com/support
Thank you in advance for your continued patience and efforts, have an awesome day
OK. Need to amend my 2 days to 3 now. I never imagined the pulleys would be so hard. But getting one he'll of a work out jumping up and down on my little stool. It's just like an old time step aerobics class! 🤣🤣🤣
This was a good video. I just finished construction. Unfortunately for me, I don't know all the exercises and how to use the attachments. I know where the attachments go, but still have questions. RUclips search didn't reveal anyone guiding me through all exercises. Need help.
Hello Zebulon Satrap - Thank you for your message. The following blog isn't comprehensive, but it includes a number of exercises that can be completed on most stack weight home gyms - blog.marcypro.com/2022/08/03/30-best-stack-weight-home-gym-workouts/
If you have any additional questions, please feel free to contact us at marcypro.com/ - have an awesome day!
Same here!!!😂
I was 99% done but the bottom cable is too short. Only way I can connect it has the top weight suspended rather than resting like the rest of the weights, is that normal or do I have an issue?
Hello @jaqueezy33 - thank you for reaching out to us. This can occur when the cable is too short (manufactured incorrectly.) However, the more common occurrence is the cable is not drawn through the machine correctly (take a wrong turn, a bracket is backwards, etc.)
Please reach out to our qualified reps at marcypro.com/support - if possible, when opening a ticket, please attach an image of the side of the unit and a rep can help you from there.
Thank you in advance for your patience and efforts, we look forward to helping you soon!
I was putting it together and when I finished the ropes weren’t retracting and when I looked in the book and in the video part 39 and 40 weren’t mentioned
Hello - thank you for reaching out to us. Part 39 and 40 are used to lock the plates in to place, which can be added after the rest of the assembly is complete. It shouldn't impact the movement of the cables however.
Please open a ticket at marcypro.com/support and they'll be able to help figure out why the cables aren't retracting.
Thank you in advance for your patience and efforts, we look forward to helping you soon!
Great video! Thank you. Somehow I've done all this and I'm still 9" short from being able to connect my top cable to the rod that goes through the weights.
Hello Joshua Cataldo - thank you for your message. I am sorry to hear that! There is a chance that a bracket was installed backwards or the incorrect cable was used / received.
Please open a ticket at marcypro.com/support - they will be able to help you determine the issue and send any parts if needed.
Thank you in advance for your patience and efforts, have an awesome day!
@@MarcyFitness I could have possibly received a wrong cable size. I am currently in contact with customer support and they are showing me that the bottom two pulley system is up too high but all the brackets are in the correct placement. I am still trying to figure out if the cable is too short.
@@joshuacataldo2612 - I see, I am sorry to hear that! They will help you determine if the cable is incorrect and send a new one if that is the case.
In the meantime, if you have any questions, please feel free to contact us at marcypro.com/ - thank you for your continued efforts and patience, have an awesome day!
@@MarcyFitness thank you.
@@joshuacataldo2612did you fix it because i’m having the same problem, if you did please let me know how. Thanks!
Can anyone tell me how much room is needed around the base and ifi can put it against wall? I have the hieght in cellar nut were i want it little room would be above it
Hello @Wanda Morse - Thank you for reaching out to us. We generally recommend having 2 feet of space around any unit in order to have the space to easily move around the unit as needed.
In addition, you would be unable to put the unit completely against the wall as you need access to the back of the unit to change the number of plates being used.
If you have any additional questions, please feel free to contact us at marcypro.com/ at any time. Have an awesome day!
I want to replace part 28 but I’m unsure which one to select on the website as there are different options, can u assist please
Hello @gillylewis2560 - thank you for reaching out to us. Unfortunately, not all parts are available on the website currently.
If you are not under warranty, please request your part via ticket at marcypro.freshdesk.com/support/tickets/new
When opening the ticket at the link above, please provide your full name, address, model number, part(s) needed, and quantity needed for each part. A customer rep will reach out to you with availability / pricing
If you have any additional questions, please feel free to contact us at www.marcypro.com/ - have an awesome day!
Any place you can find the CAD assembly file? Trying to map it out in my space before I buy it.
Hello Asa Palmer - Thank you for your message. We sincerely apologize, we do not have the CAD assembly file (we're currently working on getting them in order to make an AR feature in the future that will give people an idea of how the unit would look in their home.)
If you have any additional questions, please feel free to contact us at Marcypro.com at any time - have an awesome day!
Is there a simple wy to remove the weights? I put some of them in the wrong direction.
Hello @detraed8962 - Thank you for reaching out to us. We generally recommend using the manual and going backwards, but you could remove the upper frame and upper cable to access the weight plates.
If you need additional help or instructions, please feel free to reach out to our customer service team at marcypro.com/support
Thank you for supporting Marcy products, have an awesome day!
I noticed when I exercises like cable pull through or rdl the leg extension portion at the bottom moves, how do I avoid is?
Hello @gillylewis2560 - thank you for reaching out to us. Our customer service team noted they'll need to see the issue to provide guidance.
When you have a chance, please open a ticket at www.marcypro.com/support and attach a short video of the issue a couple of images and a rep will be better able to assist you.
Thank you in advance for your patience and efforts, we look forward to helping you soon!
The last cable thread seems too short , the last pulley above seat doesn’t have enough slack resulting in top weight lifting , any advice ??
Friends at Marcy: I’m 5’11” and buying a Marcy Home Gym, 300 lb. stack (MWM-7454). I understand that the lat pull-down will not give me quite a full range at my height. Q: Is there an adjustment to the machine - e.g., raising it a couple of inches on a solid foundation of 2x4s - that it will allow me the full range of motion on the lat pulldown? Thanks!
Hello Paul Klenk - thank you for your message. We sincerely apologize, we do not have an officially approved way to modify the unit to provide more height. As a result, we would be unable to recommend making that modification.
If you have any additional questions, please feel free to contact us at any time at marcypro.com/ - have an awesome day!
part 21 is really short is that normal?
Hello @therealist1103 - thank you for reaching out to us. Part 21 shouldn't be particularly long.
Please reach out to us at marcypro.com/support with an image of the part and a customer rep will be able to confirm if there are any issues with the part.
Thank you in advance for your patience and efforts, we look forward to helping you soon!
can i add more weight to it like plates?
Hello @wavvy956 - thank you for reaching out to us. You would be unable to add any weight plates to our stack weight home gyms.
If you have any additional questions, please feel free to contact us at www.marcypro.com/ - have an awesome day!
My cables came short I already adjusted them and it’s still the same thing
Hello - thank you for reaching out! We recommend checking to see if your part 14 (swivel pulley brackets and pulleys) are facing the right way toward the butterfly arms. If this does not work out, we recommend sending a picture to our support team so that we may further review your set up.
Hope this helps, have an awesome day!
Are parts available to order if we need them?
Hello Ajavilacuriel10 - thank you for reaching out to us. We definitely have parts if needed!
You can request free parts under warranty or request to purchase parts via ticket. Both links can be found here: www.marcypro.com/parts
Thank you for supporting Marcy products, have an awesome day!
Help! I have no part #57 screws?
Hello Fifa20 proclubs - I am sorry to hear that! Replacement parts can be ordered (or purchased if you're not under warranty) at the following link: www.marcypro.com/parts
Thank you in advance for your patience and efforts, have an awesome day!
@@MarcyFitness further down the line I've found that there are more missing items. I wouldn't purchase anything from you again. Absolutely disgusting
What is #39 for?
Hello @kraggy5279 thank you for reaching out to us. The lock pin goes in a hole in the guide rod.
Once the lock pin is in place, you can connect the lock at the end of the pin to lock the stack in place.
If you have any additional questions, please feel free to reach out to us at marcypro.com/ - have an awesome day!
Where is the 53 screw in the package? Can't find mine.
Hello Daniel Penfield! Thank you for your question. The screw should be in the hardware pack. If it is missing or lost for any reason, please feel free to request your part at www.marcypro.com/parts
Thank you for your patience and efforts, have an awesome day!
I'm sure you'll probably have it figured out already but the 53 screw is already connected to the appropriate cable it's not in the packets ☺️