Hello @rthd - Thank you for reaching out to us. Definitely, these machines are a bit more elaborate than they look. If you need any help or have questions regarding your machine, please feel free to contact us at any time at www.marcypro.com/support Thank you for your support, have an awesome day!
Hello @Manuel.Torres1 - thank you for reaching out to us. We generally recommend using the instruction manual and going backwards to disassemble any of our units. You could potentially go backwards in the manual until the point where you can remove the weight plates, then reassemble the machine without the weight plates on the unit, but we recommend disassembling the unit. If you have any additional questions, please feel free to contact us at www.marcypro.com/ - have an awesome day!
🔧ASSEMBLY:
[0:00] - UNBOXING
[0:29] - STEP 1: guide rods, rear stabilizer, weight plate bumper
[1:09] - STEP 2: guide rods, rear stabilizer, weight plate bumper, u-shaped bracket
[2:29] - STEP 3: vertical frame, bracket
[3:07] - STEP 4: selector rod, weight plates, selector stem, weight selector pin
[3:43] - STEP 5: upper frame, bracket
[5:06] - STEP 6: leg developer holder, seat support, bracket
[5:36] - STEP 7: upper frame, front press base
[6:35] - STEP 8: front press axle
[7:01] - STEP 9: left & right butterfly, large foam roll, front press handle
[8:45] - STEP 10: butterfly axle, butterfly arms
[9:25] - STEP 11: seat pad, backrest board
[9:25] - STEP 12: leg developer holder, leg developer
[11:20] - STEP 13: foam tube, foam roll
[11:46] - STEP 14: swivel pulley bracket
[12:24] - STEP 15: weight stack cover, weight stack cover bracket
[14:31] - STEP 16-18: upper cable, pulleys, double floating pulley bracket, cable retainers
[17:46] - STEP 19: butterfly cable, pulleys
[19:27] - STEP 20-22: lower cable
[24:02] - STEP 23: lat bar, chain, abdominal strap, ankle strap
Wow just ordered one and didn't realize how much assembly is required - good to see there is this assembly video to help out
Hello @rthd - Thank you for reaching out to us. Definitely, these machines are a bit more elaborate than they look.
If you need any help or have questions regarding your machine, please feel free to contact us at any time at www.marcypro.com/support
Thank you for your support, have an awesome day!
This was so helpful and much more detailed than the manual.
Hello @theCulturist - thank you for reaching out to us. Glad to hear the video helped! Thank you for supporting Marcy products, have an awesome week!
If I wanted to relocate this machine, Guero can I just remove the weights without taking the whole thing apart?
Hello @Manuel.Torres1 - thank you for reaching out to us. We generally recommend using the instruction manual and going backwards to disassemble any of our units.
You could potentially go backwards in the manual until the point where you can remove the weight plates, then reassemble the machine without the weight plates on the unit, but we recommend disassembling the unit.
If you have any additional questions, please feel free to contact us at www.marcypro.com/ - have an awesome day!