Looks really good, Very nice setup! I have a 23 SR5 and went with 1.75” rough country spacers in the front with Cornfed 1” spacers in the rear with SCS F5 wheels w/ 12mm offset and 275 70 R18 tires.
@@steverpmoffroadgarage8584 what rear springs would you recommend for about 1" of lift in the rear? 2" might be too much if im lifting the front 3" I want a nice and level stance
I've got a newer previous gen. I've just leveled mine + 285x70x18 on Method wheels. Really wish I could get more aggressive, but I have to be able to get her in the garage and as it is, I only have about 1 1/2" to spare. Need to mod the garage door!
I love the stance. How would you say that the ride quality is after having more time in your truck? Anything that you would do differently? Thank you!!!
I have a 2022 tundra trd pro with 2 1/2 in front and 1 inch in the rear westcott lift I currently have 37s on right now my rear end is a little lower in the rear what what do you guys suggest for the rear spring ? I don’t want to get new shocks and keep my fox shocks I just want it to be more level with no sag when I load weight thanks guys
Would you use the same rear OME springs if you have a 3" front lift and have about 300 lbs worth of racks, RTT, and gear in the truck bed? Or would you suggest using something else? Maybe a Dobinson's 80-series Landcruiser 2" rear springs lift? Thanks for the any info or insight...
The “stance” looks great! Do the those Radflo shocks accommodate the higher lift? Do you need longer end links with the taller lift? Are you getting the total chaos rear arms?
The shocks handle the extra lift well. Gonna go to taller front spring and higher spring rate to lessen the spring preload. Yes working on extended sway links. Planning to build our own rear links. 😁
Damn clean. I work in my rig and 95 percent of the time there loads in the back. I like those green ones
Looks really good, Very nice setup!
I have a 23 SR5 and went with 1.75” rough country spacers in the front with Cornfed 1” spacers in the rear with SCS F5 wheels w/ 12mm offset and 275 70 R18 tires.
How much lift did the ome 2866 springs give you in the rear over stock? I am looking for the 2 inch lift spring for my 2023 TRD pro.
Such a nice set up here. I need this on mine 🔥
Thanks! Let us know if you need any help questions etc..
@@steverpmoffroadgarage8584 what rear springs would you recommend for about 1" of lift in the rear? 2" might be too much if im lifting the front 3" I want a nice and level stance
@@steverpmoffroadgarage8584 what’s a good contact for your shop? I wanna get those springs you used going with the same tire setup
Looks fantastic! I may do this on my truck too! 🤙
Totally recommended!!
what is the brand and item number for the green one?
I've got a newer previous gen. I've just leveled mine + 285x70x18 on Method wheels. Really wish I could get more aggressive, but I have to be able to get her in the garage and as it is, I only have about 1 1/2" to spare. Need to mod the garage door!
Rear looks lower to me visually. Not sure I am going to go with 37's, seems to be less issues and work and still looks great with 35's.
I think you got a good point. Kinda depends on the angle and how flat the ground is but in person fairly level most of time..lol
I love the stance. How would you say that the ride quality is after having more time in your truck? Anything that you would do differently? Thank you!!!
Love your Tundra! Do you still have the ome 2866 springs on the rear? How many inches does it lift?
They lifted about 2”
I have a 2022 tundra trd pro with 2 1/2 in front and 1 inch in the rear westcott lift I currently have 37s on right now my rear end is a little lower in the rear what what do you guys suggest for the rear spring ? I don’t want to get new shocks and keep my fox shocks I just want it to be more level with no sag when I load weight thanks guys
Great job - awesome! Did you have to trim for the front wheels?
Yes I did, trimmed the felt liners
Would you use the same rear OME springs if you have a 3" front lift and have about 300 lbs worth of racks, RTT, and gear in the truck bed? Or would you suggest using something else? Maybe a Dobinson's 80-series Landcruiser 2" rear springs lift? Thanks for the any info or insight...
I would recommend using a non progressive rate spring for your application.
@@steverpmoffroadgarage8584 Do you have one specific in mind?
@@steverpmoffroadgarage8584 I would like to know as well
The “stance” looks great!
Do the those Radflo shocks accommodate the higher lift?
Do you need longer end links with the taller lift?
Are you getting the total chaos rear arms?
The shocks handle the extra lift well. Gonna go to taller front spring and higher spring rate to lessen the spring preload.
Yes working on extended sway links.
Planning to build our own rear links. 😁
Wondering what I would need to fit a 38X13.50R22LT Tires?
Solid 3” lift and a lot of trimming. Wheel offset right around +20
The green springs, did they not fit or just didn’t like the rake?
They provided too much lift, there was about a 2” rake
Got a part number for the OME progressives? Or link?
OME2720 - we are able to get you these springs if you can’t find them.
@@steverpmoffroadgarage8584 I believe you said those were the 0" lift I was asking about the 2" ones? Are they 2863 or 2864?