When you mounted the winch to the bumper did you need a bracket or did the winch bolt right into the holes in the bumper? Just got the 1000 bumper for my 2020 850 just need the winch now
I have the same bike as you. I think you should have made a video for installing the front bumper from the 1000 HL & winch. Make it a little bit of easier for us guys with the 850s
I got the 2020. Had a twisted rear yolk from factory that eats ujoints, my front diff leaks. Starter already locked up, and I had problems with my plugs under water. Fun to ride. Not fun to fix
Hey man I have a 2020 850 highlifter , currently have a 2 inch bracket lift with 29.5 outlaws , you think I can clear 32.5 outlaws on the 2 inch lift ?
Nah you don’t need clutches until you get up to around 35s or larger. The HLs have a 40% gear reduction in high and low that allow them to spin bigger tires easily
I have the 1000 highlifter and just ordered to 2in bracket lift for it and I couldn’t imagine clearing those, how in the world are you clearing those tires 😳
My High lifter used to sputter under water until I put some dielectric grease on the spark plugs and inside the boot and it runs great under water. ruclips.net/video/e8b1jfJ82hY/видео.html link to my page if you wanna see it getting down.
Yes. Twice actually. The first time I was able to clean it and it worked fine for a year. And just recently it went all the way out. I actually have a video of how to clean it and stuff that I’ll be posting soon
Nah if you get some offset wheels you don’t have to. If you do the 2inch and keep the stocks wheels/tires you’ll have to because they’ll run your snorkel tube.
@@rickmercs I’ve had mine for about a year now and and like every other ride makes a weird sound then stops and sounds fine after but its probably about to time for me to switch exhausts.
@@cadenmiller1968 I’ve heard the mounts fall apart real bad and the packing don’t last long at all. Could just be a few bad apples but never know. Might as well do a bit extra and get a RJWC. But I do love Big Guns sound though
@@rickmercs My mounts never fell apart, and it runs good, it’s just every now and then when it makes a weird sound like it wants to cut off but stays running at the same time, it’s a really weird sound but it’s fine after, But I think RJWC is the way to go
It does make a slight noise on the first part of starting but after that you shouldn’t hear anything. If you hear a constant clunking it could be your Ujoint or an axle popping
When you mounted the winch to the bumper did you need a bracket or did the winch bolt right into the holes in the bumper? Just got the 1000 bumper for my 2020 850 just need the winch now
I have the 2 inch bracket lift so 18s and 32s should be perfect no cutting what you think?
Those rims are 20x7? And did you fit those 33’s with the 2in lift ?
I have the same bike as you. I think you should have made a video for installing the front bumper from the 1000 HL & winch. Make it a little bit of easier for us guys with the 850s
I got the 2020. Had a twisted rear yolk from factory that eats ujoints, my front diff leaks. Starter already locked up, and I had problems with my plugs under water. Fun to ride. Not fun to fix
Hell yeah bud love the videos I follow you on tic tok also POLARIS GANG🤘
Kyle Oliver Preciate it my guy💪🏼
Polaris gang
Where can I find aftermarket lug nuts for the Polaris
Bro, are you at LACFEST in Georgia?
Hey I’m thinking about getting a Polaris should I idk if I should or not
Hey man I have a 2020 850 highlifter , currently have a 2 inch bracket lift with 29.5 outlaws , you think I can clear 32.5 outlaws on the 2 inch lift ?
Mateoz_ Vlogz most definitey. I’m clearing 33 BKTs with the 2 inch
Shout exhaust is stock right? If not then what exhaust is it and what do you recommend for exhaust
It’s stock
I got mine from shoals outdoors sports by the bridge
Looking good man. Would look even better if ya sat a Honda next to it 😂
But Honda would make it be🤮🤮🤮
No clutch work at all? No problems with the 33’s turning them it seems
Nah you don’t need clutches until you get up to around 35s or larger. The HLs have a 40% gear reduction in high and low that allow them to spin bigger tires easily
Price kya he sar
Bro got to put an exhaust on it
Did you notice any difference after tuning it want more power out of my 1000
I have the 1000 highlifter and just ordered to 2in bracket lift for it and I couldn’t imagine clearing those, how in the world are you clearing those tires 😳
How’s it idle underwater?
My High lifter used to sputter under water until I put some dielectric grease on the spark plugs and inside the boot and it runs great under water. ruclips.net/video/e8b1jfJ82hY/видео.html link to my page if you wanna see it getting down.
Hey brother have you had any problems with your starter at all?
Yes. Twice actually. The first time I was able to clean it and it worked fine for a year. And just recently it went all the way out. I actually have a video of how to clean it and stuff that I’ll be posting soon
The cat bought me
Did you have to add spacers?
Nah if you get some offset wheels you don’t have to. If you do the 2inch and keep the stocks wheels/tires you’ll have to because they’ll run your snorkel tube.
You should get an RJWC or Big Gun exhaust they both sound great on it, I have a big gun.
I’m going to end up getting RJWC. I like the sound of Big Gun but I’ve heard they don’t last long
@@rickmercs I’ve had mine for about a year now and and like every other ride makes a weird sound then stops and sounds fine after but its probably about to time for me to switch exhausts.
@@cadenmiller1968 I’ve heard the mounts fall apart real bad and the packing don’t last long at all. Could just be a few bad apples but never know. Might as well do a bit extra and get a RJWC. But I do love Big Guns sound though
@@rickmercs My mounts never fell apart, and it runs good, it’s just every now and then when it makes a weird sound like it wants to cut off but stays running at the same time, it’s a really weird sound but it’s fine after, But I think RJWC is the way to go
If you couldn’t have a Polaris what brand would you go with?
Canam...and if I couldn’t have CanAm then I’d have nothing
Rickmercs cool thanks
Yamaha.
i bought my 2018 polaris sportsman 450 ho utility from there
Hey does your clunk when accelerating?
It does make a slight noise on the first part of starting but after that you shouldn’t hear anything. If you hear a constant clunking it could be your Ujoint or an axle popping
@@rickmercs after 15 miles, its brand new
@@tennessippiriders2129 I mean it’s possible lol it’s more than likely just normal noise from the rear diff. Mine does it all the time.
Yeah. Figured that out already. Still good machines
I follow u on tik tokbro
Kitty !!!!!!!
Hello Nathan
I promise that cat doesn’t care about that ATV...or any other ATV. In fact, that cat doesn’t care about anything.
Wow you’re so woke dude
@@rickmercs Just poking a little fun. I’m not a troll.
Dude… you don’t workout lol
Workout 5 days a week,Just don’t eat right🤷🏻♂️
@@rickmercs I was joking bro. I really enjoy your videos. I can see the weight lost from your older videos. Keep up the good work!
@@delveckiogotstatus1599 like I said,I don’t eat right so that weight done come back😂😂but thanks buddy I appreciate it!
@@rickmercs no problem!