i watched many builds before i bought this case, and bro, you just did a piss poor job on constructing this- there are so many options to use the extra space as fan mounts, diy storage mounts, double gpus and so forth- i think this case is a great case, and one that is FULLY customizable
Well, a lot can be said for this review and I'll try to be succinct. First, thanks for the plain honest truth, much appreciated. Second, beauty is in the eye of the beholder as it is for all things. Third, I'm certain Cougar designed this case for those seeking unusual aesthetics over convenience (form over function) and intentionally sacrificed some of the latter to accomplish the former. If I purchase this case it will be for the same purpose. Fourth, despite your specific reservations about unnecessary obscuration of the internals by the opaque case paneling, the project turned out remarkably well. However, I agree it looks better with more transparency _for this build_ since you opted to forego internal lighting. With increased case opacity, whether through darkly tinted acrylic/glass or metal/plastic side paneling, more emphasis to internal lighting greatly enhances the build. It makes the viewer more curious to see what lies behind the paneling and heightens interest, JMHO. What could have been done with this project is remove all or most of the side panels and replace them with a single piece of acrylic. When you presented the case with it completely open on the side, the build looked glorious and wondered why not have it that way permanently with a clear cover instead? The way I see it, a builder using this case has the choice of either using all the panels and spec _lots_ of internal lighting, or dispense with the panels completely for a more muted arrangement as in this build.
I don’t mind it having two viewing windows instead of a “who can have the biggest tempered glass side panel” arms race, it looks cool and unique so I like it 🤷🏼♂️
Sticking the original conquer inside cracked me up! 😆 Love the review & build, especially how honest it was & no bs. I also like that you explain your mods, it helps us noobs to learn & get some ideas.
I'm sure you remember me from all the moding groups on Facebook. I have been so busy programming and just finished a long project I was on. I was going to buy this case and do a build but after watching this I don't think I will do one in this case.
Do you recommend to buy this PC case? Looking to your review i see that is not comfortable to install all PC components into this case, then if i want to change RAM or add RAMs, or change video card, or add HDD and SSDs (M.2 or SATA) etc, then it is very hard to uninstall this case and add some component or change something, by the way every 6-7 months i have to change thermal paste if i install i9-13900K processor or something else, it is really hard and not comfortable to change some detail or components from this PC. Please give me some positive advice or info about this case, if it is exist. Negative things is seen, it gets many DUST, noisy, hard to install into this case (i must remove or uninstall 10-14-20 bolts, and external shields or protective external metal).
If you can change the side panels to clear acrylic then you should be able to just remove the side divider (orange thing) and slap on a custom acrylic, full view, side panel
what i did formy pc is painted the black parts of the case white and the orange parts light blue and it looks great i personally love this case but they could make it better by have more color choices
i should have un subscribed the moment you couldnt see it eye to eye with me that how beautiful this case really is. this is the case of my dreams. but ill let it slip for now.
Hello, sir! Idk if you will see this but I was really curious about how you modded the Logo in the front. You mentioned you put a sticker over it and sanded it down ? Is the Orange still there you just covered it up? Also I was curious where/how you got the sticker itself! Any info is greatly appreciated as I am very interested in this case :)
i like how it looks with its glass panels and stupid orange thing taken off, if it had some crazy single curved and shaped glass as the panel i think it would look good
@@toonvanrusselt8304 He re-use many of them or he build pc for special customers and brands and so they pay for the parts, I'm pretty sure he explained it in an other video
Fast and furious body kits? really? You couldn't have said RC controlled cars? More accurately, no? -This case is gorgeous and the ability to take it out and build it outside is super smart.
I love how the unmodded case looks and I also love what you did with it. Considering the price, it's disappointing to learn how much plastic they used. I think I'd rather spend half as much on the case and put that money into hardware like the GPU or CPU or even system board. Or maybe I'll splurge after all and look into the Antec Torque.
Thanks for the review, I was thinking about this case to build a MONSTER editing/gaming pc but I think I might go with the gemini x case for 2 pc build smaller one for edits and big one for gaming
Really for you, it is a real garbage and it is very valid. The funny thing is having taken 23 minutes to explain that something is useless, 3 minutes would have been enough. (plastic is plastic, orange black or white, is still plastic)
Hey, hi, sorry to ask of this here, can u please do a build in Lian Li PC-O11D (not XL), with only SOFT tubing & make it gorgeous in your style Problem here is not paranoia about Rigid Tubing, but, the thing is want to build a Custom WaterCooLed PC for nephew, so Soft Tubing would give me ease in maintenance duty Extra Fittings = okay Please reply, I will be waiting 🙏🙏🙏😁😁
Looks like the ultimate case when building for a 10 year old boy. Slap big Marvel & Transformers stickers on it and make the insides glow with cool RGB lights. The specs don't even need to be high end, the kid will be blown away by the looks of the PC alone for years. And it'll be easy to upgrade over the years with the sliding inner case. This 200€ extra cost for the looks would be totally justified in such a case. For a serious gamer, go for something 200€ cheaper and better at the same time. Not hard to find such cases.
Wow, this review is so bad (for conquer), that I was about to close the video at the 10minute mark. There's only so much abuse someone can watch lol. But you got me with the LCD screen!
Damn, thanks for the video. I really wanted this and create this robo police theme with Red and Blue RGB lights but these issues are just too much of a deal breaker, really heart broken :/
I like the case. Not concerned about what it’s made of, only that the orange piece will leave finger prints. Good to know. AMAZED at how unimpressed your are at it’s looks and working features and neatness. I can only imagine your s*X partner being extremely bored. Anything off the normal and you don’t like it. Such bland taste you have.
Such petty complaints. If you have real carbon fiber you would pay well over 1 k for the case, also having some plastics parts help keep the weigh low. Seriously you made some dumb critical arguments. The case internally is mainly crammed on the rear area of the mother board for cable management. The Fan behind the glass is my favorite feature, and if you dont like it, some people have put digital displays in them. Personally this unit is far more attractive to the Conquer 1. Conquer 1 already exist, Conquer 2 doesnt have to followed everything than unit 1 did, is a new design and hence it should be review for what it is not why is not doing what unit 1 did. Just dumb though process
Yes. If the whole case were metal and did not use plastic pieces, it would weigh 100+ lbs, and if they used lighter metals, such as aluminum or carbon fiber, it would cost way too much money. Plastic is a compromise, so complaining about the presence of plastic in a case as big as this is stupid.
350 us??? no no no no the antec torque is mutch better in the material's and the looks and every thing and the same price personally i don't an't to pay 350 dollars for piece of plastic
i watched many builds before i bought this case, and bro, you just did a piss poor job on constructing this- there are so many options to use the extra space as fan mounts, diy storage mounts, double gpus and so forth- i think this case is a great case, and one that is FULLY customizable
I agree with you buddy. This video is dumb
I agree too
Looks like they made a case from a wrecked sports bike. Or Optimus Primes shoulder.
RYTHMIC RIOT maybe both?
Probably the cleanest build I've ever seen. Well done. And I like the looks of the case! Lol
7:21 DAMN! didn't expect it to be that big lmao
Facts!
*_Thats what she said_*
@@floppademon1506 xaxaxa
@@floppademon1506 How did I see that coming
Well, a lot can be said for this review and I'll try to be succinct. First, thanks for the plain honest truth, much appreciated. Second, beauty is in the eye of the beholder as it is for all things. Third, I'm certain Cougar designed this case for those seeking unusual aesthetics over convenience (form over function) and intentionally sacrificed some of the latter to accomplish the former. If I purchase this case it will be for the same purpose.
Fourth, despite your specific reservations about unnecessary obscuration of the internals by the opaque case paneling, the project turned out remarkably well. However, I agree it looks better with more transparency _for this build_ since you opted to forego internal lighting. With increased case opacity, whether through darkly tinted acrylic/glass or metal/plastic side paneling, more emphasis to internal lighting greatly enhances the build. It makes the viewer more curious to see what lies behind the paneling and heightens interest, JMHO.
What could have been done with this project is remove all or most of the side panels and replace them with a single piece of acrylic. When you presented the case with it completely open on the side, the build looked glorious and wondered why not have it that way permanently with a clear cover instead? The way I see it, a builder using this case has the choice of either using all the panels and spec _lots_ of internal lighting, or dispense with the panels completely for a more muted arrangement as in this build.
for me, it's wonderful case ; )
I don’t mind it having two viewing windows instead of a “who can have the biggest tempered glass side panel” arms race, it looks cool and unique so I like it 🤷🏼♂️
The case is very beautiful with its original design, the only modification I loved was the LCD display. the more RGB the better.
Hello, what riser cable did you use?? Thanks. Hope to hear back soon. You didn't mention.
I love the way the case looks. It looks like a robot head from the movie chappie.
J and K White That is the perfect description of this case! 🍻 👍
Hi! How did you route the cables from the display?
Sticking the original conquer inside cracked me up! 😆
Love the review & build, especially how honest it was & no bs. I also like that you explain your mods, it helps us noobs to learn & get some ideas.
Gorgeous case
F'n hell man, I just found this video 2 days AFTER I just bought this case.
I'm sure you remember me from all the moding groups on Facebook. I have been so busy programming and just finished a long project I was on. I was going to buy this case and do a build but after watching this I don't think I will do one in this case.
Love that soundtrack, it probably inspired me to buy this case, can't wait til it arrives, great build!
Coolest Full Tower Case Ever
Hope the 3rd iteration will fix all these issues
*Is that camera angle or is that case MASSIVE!*
Crazy how big it is yet only so few components actually fit inside. Even a Define R7 can fit two 360mm rads no problem.
Do you recommend to buy this PC case?
Looking to your review i see that is not comfortable to install all PC components into this case, then if i want to change RAM or add RAMs, or change video card, or add HDD and SSDs (M.2 or SATA) etc, then it is very hard to uninstall this case and add some component or change something, by the way every 6-7 months i have to change thermal paste if i install i9-13900K processor or something else, it is really hard and not comfortable to change some detail or components from this PC. Please give me some positive advice or info about this case, if it is exist.
Negative things is seen, it gets many DUST, noisy, hard to install into this case (i must remove or uninstall 10-14-20 bolts, and external shields or protective external metal).
If you can change the side panels to clear acrylic then you should be able to just remove the side divider (orange thing) and slap on a custom acrylic, full view, side panel
what i did formy pc is painted the black parts of the case white and the orange parts light blue and it looks great i personally love this case but they could make it better by have more color choices
How does this not even have 10 thousand view yet.
Boy o boy
you are a artist who built masterpiece 😎
Where to buy the Acrylic side panels for conquer 2? I dont know how to customize that
i should have un subscribed the moment you couldnt see it eye to eye with me that how beautiful this case really is. this is the case of my dreams. but ill let it slip for now.
Hello, sir! Idk if you will see this but I was really curious about how you modded the Logo in the front. You mentioned you put a sticker over it and sanded it down ? Is the Orange still there you just covered it up? Also I was curious where/how you got the sticker itself! Any info is greatly appreciated as I am very interested in this case :)
i like how it looks with its glass panels and stupid orange thing taken off, if it had some crazy single curved and shaped glass as the panel i think it would look good
@@hannesarved yah ir locks you down to certain colors unless you want to recolor it which i wouldnt expect costumers to do
bumblebee head when you look the side of the case
Can you make a review on invasion gt100?
What do you think of the GPU block with the fittings at the end? Can you see a use outside of pure aesthetics?
Love them. Much easier for cleaner builds. I use 2 of them in the TRX40 build that is on this channel
@@studog858585 Sweet, I'll check it out!
It almost looks like a Gundam head. Not bad looking but not for me. Great video as always 👍
lol I find it looks like a half life drone
QUANTO CUSTA ESSE GABINETE
It's the best case I've ever seen xD
damn! that thing is huge!
Cougar Conquer v2... Nice case! I alreadi saw build in this case
Sir,
Which camera you use to make this video.
Model no. Of camera
Kindly reply me
Panasonic GH5
Would you recommend this case for air colling guys?
Hello guys, can anyone please tell me how to safely remove the front glass of this case, please? I already bought this case, please help!
How much is this whole build including the case?
You should try to do a review and build in the Segotep Argus, it’s kinda unique and there isn’t much info out there on it.
how can u afford these parts everytime?
I wonder it too. Maybe he works for a shop that is specialist building special PC's? I would like to know.
@@toonvanrusselt8304 He re-use many of them or he build pc for special customers and brands and so they pay for the parts, I'm pretty sure he explained it in an other video
Sponserships. (Notice he uses a lot of EVGA and Asrock parts)
Sponserships bro. It's not so hard to known
I think he has a job, or something.
Fast and furious body kits? really? You couldn't have said RC controlled cars? More accurately, no? -This case is gorgeous and the ability to take it out and build it outside is super smart.
Is the GPU block supposed to bleed over like that?
I love how the unmodded case looks and I also love what you did with it. Considering the price, it's disappointing to learn how much plastic they used. I think I'd rather spend half as much on the case and put that money into hardware like the GPU or CPU or even system board.
Or maybe I'll splurge after all and look into the Antec Torque.
Love from Bangladesh ❤
I'm guessing these types of cases are exclusively for watercooled builds? Any hope of an aircooled build in these?
the amount of mods you`ve done its crazy but no one in their right mind would pay for it
It's like a mini space ship
I wanted to buy this case from your old videos, but I decided to go with the evolv instead
Question, did you manage to mount your res/pump level? did you make a modification or is the angle too minimal to create an issue?
You turned a turd of a case into something beautiful.
I wonder if you can find the worst case possible, and make it something beautiful.
Except it's a great look non conformist case
Gostei muito
You know a case is ugly when not a GGF build can save it
Thanks for the review, I was thinking about this case to build a MONSTER editing/gaming pc but I think I might go with the gemini x case for 2 pc build smaller one for edits and big one for gaming
Oh wow I didn’t know how flimsy and lower quality the second counquer is. I wanted to upgrade to this from my first conquer but I’ll definitely pass.
I prefer the Antec Torque...
Really for you, it is a real garbage and it is very valid. The funny thing is having taken 23 minutes to explain that something is useless, 3 minutes would have been enough.
(plastic is plastic, orange black or white, is still plastic)
Maybe a different color will make a difference.
Hey, hi, sorry to ask of this here,
can u please do a build in Lian Li PC-O11D (not XL), with only SOFT tubing & make it gorgeous in your style
Problem here is not paranoia about Rigid Tubing, but, the thing is want to build a Custom WaterCooLed PC for nephew, so Soft Tubing would give me ease in maintenance duty
Extra Fittings = okay
Please reply, I will be waiting 🙏🙏🙏😁😁
BGM？
The inner case ist better than the whole case
Looks like the ultimate case when building for a 10 year old boy. Slap big Marvel & Transformers stickers on it and make the insides glow with cool RGB lights. The specs don't even need to be high end, the kid will be blown away by the looks of the PC alone for years. And it'll be easy to upgrade over the years with the sliding inner case. This 200€ extra cost for the looks would be totally justified in such a case.
For a serious gamer, go for something 200€ cheaper and better at the same time. Not hard to find such cases.
So?...Awful and poor quality case... Thanks for the honest review.
Wow, this review is so bad (for conquer), that I was about to close the video at the 10minute mark. There's only so much abuse someone can watch lol. But you got me with the LCD screen!
Damn, thanks for the video. I really wanted this and create this robo police theme with Red and Blue RGB lights but these issues are just too much of a deal breaker, really heart broken :/
Thats enough to travel mars. 🌏🌐
I like the case. Not concerned about what it’s made of, only that the orange piece will leave finger prints. Good to know. AMAZED at how unimpressed your are at it’s looks and working features and neatness. I can only imagine your s*X partner being extremely bored. Anything off the normal and you don’t like it. Such bland taste you have.
The case may be ugly, but your build is gorgeous
I like it but what's with that stupid orange paint.
Such petty complaints. If you have real carbon fiber you would pay well over 1 k for the case, also having some plastics parts help keep the weigh low. Seriously you made some dumb critical arguments. The case internally is mainly crammed on the rear area of the mother board for cable management. The Fan behind the glass is my favorite feature, and if you dont like it, some people have put digital displays in them. Personally this unit is far more attractive to the Conquer 1. Conquer 1 already exist, Conquer 2 doesnt have to followed everything than unit 1 did, is a new design and hence it should be review for what it is not why is not doing what unit 1 did. Just dumb though process
Yes. If the whole case were metal and did not use plastic pieces, it would weigh 100+ lbs, and if they used lighter metals, such as aluminum or carbon fiber, it would cost way too much money. Plastic is a compromise, so complaining about the presence of plastic in a case as big as this is stupid.
I like the case. I thing it's a very sci fi look. But I agree the price for what u getting is outrageous. And their was some design flaws.
looking like a doom gun
My 14900 k core i9 + rtx 4090 build is based on this bad boy....i like it much...
You make Bitwit, Jayztwocents and Gamer Nexus look like amateurs in PC building
He is a professional modder the others are hardware reviewers better to compare his work to Jesse from JPmodified
He did make this terrible case look nice though love the paint job
Autobots !!! Rollout!!!!
350 us??? no no no no
the antec torque is mutch better in the material's and the looks and every thing and the same price personally i don't an't to pay 350 dollars for piece of plastic
its too huge, though nice case. I love it, thanks for the review sir.
I like the look, but the quality is shocking!
Its a MESS!!
@@mahmudhasan582 Its yet to be available here in Bangladesh. Once its here why not.
Hey PCB BD...❤️
Damn I liked till he set next to it
Чувак, да дерьмо, согласен!
Should've called it the Hyena. This is the ugliest and stupidest case from any vendor for a while.
In some sights this case is really ugly
Thunk
Yeah making everything all black really doesnt look good. it gets pretty boring.
Limited space as conquer 1. Bad cooling system case
dam looks good but it crappy and cheaply
Ugly case
Can i have your pc for free pls, i don't have money to buy it