Same, it’s just to amazing not watch again and sgain
4 года назад+2
How the music is complete garbage and insult to musicians everywhere. Utter trash in every possible way. Literally made for low IQ people with zero interest in actual music.
The inversion wouldn't bug me if you could reverse the nameplates on the GPU blocks so that the lettering wasn't upside down, but you can't. However I'm guessing the mainboard is inverted so radiated heat from the 2 GPUS doesn't rise up onto the CPU block allowing there to be no case fans in the main chamber. That aside though, it's bloody stunning and the build is amazing.
Yeah, looks great but I've never liked inverted either. The original Inwin 909 that this case is a modified version of originally didn't have an inverted layout and had the rear I/O exiting through the chamber that held the radiators.
I love inverted and my next case will be inverted as my desk will not allow a PC on the right side. Considering my desk costs way more than a computer, it isn't going anywhere any time soon. Besides, I have always hated having the Case on the same side as the mouse, I'm right handed.
One of the hardest challenges you have surpassed I might say , the choice of components and theme colours , the magnificient assembly of the tubes and positioning of the deposits , I think that any pc builder will give you his worship without hesitation , what a piece of art you just crafted out of nothing.
My last case was an AERO COOL Spiral Galaxies, which I had painted white then silver to match the aluminum front panel plates. It also had the motherboard mounted upside down. Beauty, form and function.
Stuart.. You always keep surprising me with your skill on PC building and watercooling. I feel this case would be a nightmare to maintain let alone trying to do the tubing in the radiator section would be a headache in itself. Great video!
Thanks mate! Yea the rad chamber took about 2 hours alone to ensure clearances were good and no cables were failing the fans. But once that was done the rest wasn't too bad. I think maintenance will be ok. Just gotta keep those rads clean
Such a great looking build. It reminds me of something I would have seen sitting in a science lab in a sci fi movie. Anyone who actually used that, would instantly earn +100 credibility.
This is not just beautiful, it's breathtaking!!! I mean RUclips videos I get, but this PC build was like watching a dream come true with eyes wide open!! ♥️💕
The inverted build doesn’t normally appear to me but in this case it really graphs by attention. Just the writing upside down affects my OCD. Great build, great case.
Looks amazing and all... but how do you dust off the radiators from the inside without taking the radiators off the loop? Soft Tubing in the inside the compartment maybe? Wish you had showed us, I'm assuming it would be nearly impossible to connect those radiators on the loop with Rigid tubing to begin with.
Given that you can go to an art gallery and find "sculptures" that sell for 10x or even 100x the price of this PC, but don't look half as good, I'd say this is pretty fucking amazing.
Very cool built, but in the end I was waiting that you could show us when the cable port is fully installed. Need to know if it still looks great or messy.
Wow. Wow. Wow. So amazing. Clean and beautiful. So good, I had to watch it twice. Clicked on the link to the case, and then realized I had to move on. LOL
That's the normal way because they don't sag and also notice that there aren't holes in 1-slot expansion cards but notches that don't hold the card installed in usual "modern" way
@@Djelnarchannel um, no. You are wrong in both your points. They are just apprearing upside down because of the motherboard orientation. Nothing to do with sag at all, as in this case they can still sag just the opposite dirrection.
It's just over 1,500 EUR from EK's website, which isn't bad for a 200 limited run case with so much functionality and looks... especially Compared to the signature cases from inwin which cost 3k-5k , and have no functionality at all.... But still... That's a rather steep price
Jaw dropping build. Great looking case. I too am questioning the inversion, but can live with it. Big question though: how in the heck did you route the tubing and fan cables to the radiators once you closed the second "side"???!?
I know this is a concept case, but where do the rads gets their airflow from? You’ve got 4 push on one rad and 4 pull on the other - are we saying that creates neutral pressure in between them? I would have thoughts that the pull side would underperform due to rad resistance creating neg pressure in the case for the push side - or am I missing something?
I feel like you can make anything look cool with a 8K camera and some dramatic music. Just take a coin laying on a table and shoot from different angles and speed. I actually came here thinking the glass on the case was somehow going to reflect RGB in some way and it gave me an idea for a project. Then I realized it was just going to be liquid passing through it.
Just a question. How did you connect the radiators to the loop once you close the panels ? I read the manual and cant figure out a way. I thought of long soft tubes to link them prior to closing the panels.
I’m not the creator but yes, the best of the very best use soft moving if it’s out of sight for convenience purposes otherwise things would be impossible and unduly cumbersome. I can’t say for sure but that’s
Gorgeous build, love that unique color theme but the inverted "Geforce Rtx" logo kinda drives me nuttz.
True
@Preston Garvey i bet ur peepee is small
Hes right tho srsly, amazing build but u had to have something like that inverted? Come on man fix it
@Preston Garvey your right its not ocd but not an idiot damnm
@Preston Garvey Naming yourself after the most lacking character in the game, fitting.
I'm speechless, I just cranked up the volume on my headsets and watched in wonder.
Same, it’s just to amazing not watch again and sgain
How the music is complete garbage and insult to musicians everywhere. Utter trash in every possible way. Literally made for low IQ people with zero interest in actual music.
@ You might be misunderstanding something mate. There were no music in this video. Only odd sounds with little to no relation to each other.
*which headset do you have*
@ if You dont like the music, how about you make some then? Id like to see you try!
Not sure how I feel about the build being inverted, but it's still absolutely stunning. As expected for a 200 unit limited run. Well done 👍
same. Inverted... eh. Rest of the build is cool. Not so sure about I/O location seeing as any cable you plug in there will ruin the clean look.
The inversion wouldn't bug me if you could reverse the nameplates on the GPU blocks so that the lettering wasn't upside down, but you can't. However I'm guessing the mainboard is inverted so radiated heat from the 2 GPUS doesn't rise up onto the CPU block allowing there to be no case fans in the main chamber.
That aside though, it's bloody stunning and the build is amazing.
I kept waiting for the case to be flipped over - it looks wonderful, but the whole thing feels upside down.
Yeah, looks great but I've never liked inverted either. The original Inwin 909 that this case is a modified version of originally didn't have an inverted layout and had the rear I/O exiting through the chamber that held the radiators.
I love inverted and my next case will be inverted as my desk will not allow a PC on the right side. Considering my desk costs way more than a computer, it isn't going anywhere any time soon. Besides, I have always hated having the Case on the same side as the mouse, I'm right handed.
One of the hardest challenges you have surpassed I might say , the choice of components and theme colours , the magnificient assembly of the tubes and positioning of the deposits , I think that any pc builder will give you his worship without hesitation , what a piece of art you just crafted out of nothing.
The case is made so that making this is quite possible even for an average water cooling enthusiast.
You have had the honor of build a pc with one of the only units of this chassis in the world
Congratulations, you must love your work!!!!
A PC has no right to be that beautiful! Stunning design, amazing build, incredible collaboration between EK and inwin.
Simply beautiful!
No unnecessary piping installed...
This is by far the best build i Seen in a Long Time... awesome!
I love it! Nothing I hate more than water cool builds that use many feet more tubing than necessary.
Simply gorgeous build. That distro plate is awesome. Overall one of your best builds.
Your builds are absolutely the very BEST!
Your builds evertime astound's me, I hope I buy a pc or laptop this year for studies.
Good luck
Buy a pc, you get better performance for the money and a upgrade path
Best build I've seen. Loving the frosted pipes
The fact they spread the thermal paste really grinded my gears for some reason!!
It's Thermal Grizzly Kryonaut. It's meant to be spread .
Case is so so, the video quality and build is stunning. You are really skilled in this .
The cinematic shots OMG
My last case was an AERO COOL Spiral Galaxies, which I had painted white then silver to match the aluminum front panel plates. It also had the motherboard mounted upside down. Beauty, form and function.
Stuart.. You always keep surprising me with your skill on PC building and watercooling. I feel this case would be a nightmare to maintain let alone trying to do the tubing in the radiator section would be a headache in itself. Great video!
Thanks mate! Yea the rad chamber took about 2 hours alone to ensure clearances were good and no cables were failing the fans. But once that was done the rest wasn't too bad. I think maintenance will be ok. Just gotta keep those rads clean
Always love purple builds.
Very well done. Not just your pc build, but the video work is top notch. Keep it up.
I ve seen a lot of your builds, they are all great, but this one is truly a masterpiece!
What a masterpiece. Love the frosted lines.
Just beautiful! epic build! great work! Awesome audio and video too!
I didn't know porn was allowed on youtube.
I didn't know stealing comments was allowed on youtube.
Middy Ashy well it is
@@middyashy3837 didnt know being salty was allowed on youtube either
The passive aggressiveness is real
mashable.com/2011/02/19/youtube-facts/?europe=true#V8AYzmtfFuq3
Very neat, very classy and just understated enough to not be "in your face" 10/10!!
Such a great looking build. It reminds me of something I would have seen sitting in a science lab in a sci fi movie. Anyone who actually used that, would instantly earn +100 credibility.
Hines one of the best creations I seen from your channel
Absolutely beautiful piece of engineering. Truly art.
I remember the 1 million dollar pc's from days of yore, this case looks just like an updated version of those -- phenomenal
The word “ dream “ is used everywhere in pc build. Every day there is a dream build
Sweet sweet sweet build! That is one clean machine!
This is not just beautiful, it's breathtaking!!! I mean RUclips videos I get, but this PC build was like watching a dream come true with eyes wide open!! ♥️💕
Thank you for not mounting RGB fans blasting you in the face and drawing the eyes away from that unique case and build.
The inverted build doesn’t normally appear to me but in this case it really graphs by attention. Just the writing upside down affects my OCD. Great build, great case.
I ordered my 909ek, cant wait for it to arrived. Shipping to Australia isn't fast.
this is something next level. this definatly out of all is my thing.
I love every cinematic scenes in this channel..
beautiful..
👍
The frosted glass is just immaculate.
A truly magnificent case. The build was masterful.
This isn’t juts a PC this is art love the build bro
More likely the most beautiful build ever
Looks amazing and all... but how do you dust off the radiators from the inside without taking the radiators off the loop? Soft Tubing in the inside the compartment maybe? Wish you had showed us, I'm assuming it would be nearly impossible to connect those radiators on the loop with Rigid tubing to begin with.
I know every channel has a tutorial on bending hard tubing but it would be great to see GFF do video on his tips and tricks!
Dude....forget everything else in that case...I just want that terminal bridge between the cards!! That is super crystal clear and I WANT ONE!!!!
Man one of the cleanest build of all AF
Purple and black. So pure and I fell in love with him
I don't know why I wasn't subscribed to the channel until now. Love the hardware. Great work.
Love the inverted case, my bequiet is also inverted as it's on my left desk.
Given that you can go to an art gallery and find "sculptures" that sell for 10x or even 100x the price of this PC, but don't look half as good, I'd say this is pretty fucking amazing.
Very cool built, but in the end I was waiting that you could show us when the cable port is fully installed. Need to know if it still looks great or messy.
Wow. Wow. Wow. So amazing. Clean and beautiful. So good, I had to watch it twice. Clicked on the link to the case, and then realized I had to move on. LOL
Beautiful piece of industrial design!
Beautiful build only question is how hard is it to put the tubes from the pump to the rad
It's one of the most beautiful built I ever seen
In my dreams the GPU's wouldn't be upside down
That's the normal way because they don't sag and also notice that there aren't holes in 1-slot expansion cards but notches that don't hold the card installed in usual "modern" way
@@Djelnarchannel um, no. You are wrong in both your points. They are just apprearing upside down because of the motherboard orientation. Nothing to do with sag at all, as in this case they can still sag just the opposite dirrection.
ZING
Dream ruined, back to nightmares.
@@Djelnarchannel Ever hear of an anti - sag bracket?
"The case of your dreams"
My wallet: I don't think so
Well, that's exactly why it is and will always be, 'the case of your (my) dreams' :)
My wallet: Exactly, and that's where it's staying.
It's just over 1,500 EUR from EK's website, which isn't bad for a 200 limited run case with so much functionality and looks... especially Compared to the signature cases from inwin which cost 3k-5k , and have no functionality at all.... But still... That's a rather steep price
So much money in this video, lol! 😂
The only case in my dreams is the good ol Caselabs SMA8 in black.
Not just a build a system, this such a piece of art ❤️
Great work & idea 👍🏻
Bruh this is the most beautiful pc I have ever seen
Nice build n dope case #EK taking over 👌
I'm digging the frosted tubes, but they seem to be the one thing not linked in the description.
Maybe the sickest build on the internet....
I would bloody kill to get that computer. that was clean and dreamy AF
Title: The case of your dreams
Wallet: "Dreaming is FREE right?"
Very interesting to see an inverted build. Nicely done, and keep up the phenomenal work :)
Congrats on 150k subs!! Im always excited to see the builds you guys pump out, keep it strong! :)
i designed a case similar to this in my head, ive always wanted to see that separate compartment in front for 2 large radiators , perfect design!!!
I'm always in awe with your builds, you've done literally a lot of art pieces, but this looks AMAZING, super clean, minimalist and high quality.
Have you got pictures of the tubing for the rads and pumps
Best channel alongside optimum tech for pc builds 🔥
So satisfying to watch as always!
I have 021 and didn't think to look for the numbered plate till I saw this, how did you do the internal tube runs?
How long did you case take to ship. Im waiting on mine now.
I got mine middle of march, but I ordered it in Feb right after it was announced, once it shipped it took about a week to arrive
Great video guys! Very cinematic
This is what we call art
Jaw dropping build. Great looking case. I too am questioning the inversion, but can live with it. Big question though: how in the heck did you route the tubing and fan cables to the radiators once you closed the second "side"???!?
I know this is a concept case, but where do the rads gets their airflow from? You’ve got 4 push on one rad and 4 pull on the other - are we saying that creates neutral pressure in between them? I would have thoughts that the pull side would underperform due to rad resistance creating neg pressure in the case for the push side - or am I missing something?
Upside down or not this case is amazing!
Enjoyed every second of this video!!
One of the Best build videos I've ever seen!!
why is black flexable tubing listed in the parts list instead of the frosted hard tubing?
These pc raised my heart beats ❤️
Fav colour, plus frosted tubes.. 😩🥰
I dont understand case orientation... I should be looking at cables unless case is on my left side which I find unusual? Awesome build as always BTW.
That case is sick af!!! I want one, must have one!
The best pc build i ever seen it could be perfect if you hide the inverted logos
As always what a beautiful build
would you say this is the most clean build you done, distro makes the view very tidy nice you did hide the fans also
Now that sent chills down my spine, what a beaut
What kinda hard tubing was that I notice it has a kinda like a stained glass look and I can't seem to find it
I feel like you can make anything look cool with a 8K camera and some dramatic music. Just take a coin laying on a table and shoot from different angles and speed.
I actually came here thinking the glass on the case was somehow going to reflect RGB in some way and it gave me an idea for a project. Then I realized it was just going to be liquid passing through it.
where did you get that comb that holds the cables or that whole set thing you got there what is that? @3:15 @ggf events
Is there any way these builds can be done without those cable looking crooked?
Can this case be tilted the other way around where the power supply will be on top?
great editing and angles.
stunning!
amazing tidy build - great work
wow that is really a dream build
Just a question. How did you connect the radiators to the loop once you close the panels ?
I read the manual and cant figure out a way.
I thought of long soft tubes to link them prior to closing the panels.
I’m not the creator but yes, the best of the very best use soft moving if it’s out of sight for convenience purposes otherwise things would be impossible and unduly cumbersome. I can’t say for sure but that’s
How does the motherboard light up without any wires?
Did you use flexible tube from the radiator to the pump?
Insane build and case, but why would they only offer an inverted one? I would buy one, even for this price, but never inverted.
Great job as awlays ! Can you tell more about the CableMod you are using ? Is it extensions or custom mades ?
i dont know much but i hae a question: is water ciculation fine on thoose GPUs? it looks like water might stuck on the upper one or move slower.