the cost of just the fittings in this build would probably get you a semi decent PC. :D Great build, love the new O11 mini air and the double loop is really interesting.
With all the 011 minis, if you keep the back movable big section at the top, & mount the smaller (not ATX) motherboards in the ITX screw-hole locations, & snip a square in that back big section for the MB I/O panel. You'll gain a ton of space to play with, including able to mount a vertical GPU with Liam Li's kit, & have dual 360 radiators. If the top radiator hits your ram, buy 8 flat brackets from Lowes or Home Depot next to the "L" brackets, but flat. Or two measuring yard sticks, cut, drill, paint, screw, done. Or two strips of wood trim.
I can’t find words, this is amazing! I wanna use this case too, for my first custom loop. How u managed to synchronize all the fans, water blocks and pumps?
I really need an inverted version of this case.... Lian Li please make inverted version please for people who have to put the PC on the right side of their desks.
Beautiful build. Would you mind sharing where those radiator covers that you are sliding into the top and bottom of the case are from? Are they custom made?
about the back plate of the active water block, and note that ekwb sell it in silver color, where did you get the white version or was it a mod made? 🤔
Man great video again!! I just love your builds! I've been diging through a bunch of them, and I've seen you often use this 180 degress for the gpu power, where I can find them? Also, can I use them on a regular GPU? Or just the ones with WC?
Im literally obsessed with this build so imma answer a few questions from fellow ytubers. Runs: Top FLT goes side rad, to the back(offset) towards the top rad, top rad to CPU, CPU back to pump Bottom FLT goes down along the bottom rad to the back in/out rad, GPU and back to the pump you can get the flow by following the direction of the collant on the CPU/GPU blocks and where its coming from Rads debate: Yes 2 rads for the CPU easily, the GPU + the active backplate with 1 singel PE240 I dont think it ever reaches >40-45c at full blast OC too. I have a 5900x with an 240 EK basic on the same case(side mounted) it handles the CPU well but under full blast it reaches 85c so I can only imagine a better DDC pump plus a 2nd PE240 keeps it at max 65-70c. There is also a massive difference in temps between all cores at 3.9 or 4.3ghz so having a second rad there will get you more performance for the same temps. Air Intake: Having the FLTs instead of 2x140mm changes little to nothing when it comes to watercooling - a MoRa doesnt get any other "fresh air intake" and I believe performs quite well with just the rad fans. Same goes for the o11 mini watercooled - its all glass 0 intakes...great temps with 2x360 One thing i see nobody say is the excellence in cable managing that beautiful box having 2 pumps and 1 lianli controller. GGF the OG!! Masterpiece!
@@GGFEvents Awesome! just saw the other video where you go over it, it looks so good, I'm planning to get the O11 Air Mini for my next build and I wasalso bothere by the black spaces so I will try to recreate the inserts
Hey, any chance you could share which brand/color of paint you used to match the satin titanium ek fittings? I’ve tried many different kinds and can’t seem to find a matching color.
Why 2 rads for cpu and "only" one for gpu been this part the hottets one? Cheers from Argentina 🇦🇷, really love your builds, the Black one is so nice too that i cant choose between them
I would prefer this configuration but with the black, no RGB aesthetic of the other one. Maybe a black, copper and silver theme, that would be awesome. This case is amazing!
This is awsome I've been looking at this case with a view to do a custom loop in the future. Could i ask though... could i pull the same off with an ATX motherboard? and could i use a corsair cpu water block with the rest of what you have used here. Thanks
How'd you fit the PSU? I have a similar system with a 3080ti, but had to re-evaluate and go up to the 011 standard size when I needed more room for an ARX PSU. Wound up going all black rather than all white, not going to lie yours is way more dope... possibly because it was built by a pro rather than me, but hey.
The way you plan and produce these builds is nothing less than extraordinary. Amazing as always.
You have impeccable taste in music my friend. Finally a build video that didnt have some ghetto fab hip hop sounding music playing.
Amazing build, incredible camera work. GCF are hard to beat at this game.
I have an O11 Dynamic Mini, but this setup looks fucking outstanding.
Pleaseee, tell me how did you paint radiators? They look like they are factory painted, damnnnn
everyone's a critic i know :) ... but wouldn't the 300W GPU benefit more from dual radiators than the 100-140W CPU?
These are showcase builds.
That building is the best i´ve ever seen especially when it glows blue and pink.
So clean!!! The glass front panel from the air wouldve complimented this build so much since it doesnt need that much air flow.. GG
So jealous I didn't wait for the white. Just got my black one yesterday. It's gorgeous but this is unreal. Great job dude.
Stu you seriously got a good eye for pairing specific parts, and once again smashing the aesthetic on this one, big ups.
6:12 What a beautiful shot
Most amazing Mini build I have seen yet!
10/10 i'm starting my build in a few weeks
Blue and pink RGB on a fully white build looks insane
Bro this is by far the best build I have ever seen in this case! Props! How much was the build? Looks like it was over $1000 just on watercooling!
you have the best toys on the shelves!
Lian Li should send those shrouds you built to hide the radiators from the factory!
Like the Build !
What's the bracket from the GPU ?
Customized or can we buy it somewhere ?
Best Regards
It is a brand called EK Water Blocks. He use the blocks and pumps from them...
Most of the time
@@lukaselpijon
I know EK I'm sorry haven't precised my question... It was linked to the bracket/cover of the power cables from the GPU
the cost of just the fittings in this build would probably get you a semi decent PC. :D Great build, love the new O11 mini air and the double loop is really interesting.
Where can I get those covers for the radiators
AMAZING ARTWORK.
My black air mini will be here Saturday!
Dang that’s clean. Wish I could buy that as is from you.
Are the thermals any good with this setup?
always love the white creamy stuff in the loop
The cum cooled PC
I don’t comment on videos but you are so original with these builds I’m always in awe
Thank you :)
@@GGFEvents you’re welcome! That dual loop design was really clever I love it.
what is that gpu sag bracket?
Are the brackets holding the res custom?
I really like your build, I think I will copy it but put the pumps at the back side radiators...
Very nice build. Where are the drain valves?
Where can you buy the silver ek flt 120? Is it also custom painted? They look awesome!
With all the 011 minis, if you keep the back movable big section at the top, & mount the smaller (not ATX) motherboards in the ITX screw-hole locations, & snip a square in that back big section for the MB I/O panel.
You'll gain a ton of space to play with, including able to mount a vertical GPU with Liam Li's kit, & have dual 360 radiators.
If the top radiator hits your ram, buy 8 flat brackets from Lowes or Home Depot next to the "L" brackets, but flat. Or two measuring yard sticks, cut, drill, paint, screw, done. Or two strips of wood trim.
This whole setup is bad ass. Now I have to find the first build
Nice one - thanks for sharing
Great this gave me an idea for a dual loop in this case now
Were did you get the cable cover thing for the graphics card? It looks awsome!
Where did you get the white spaces that covered your radiator? Did you 3d print them?
Foi preciso cortar parte do acrílico no backplate ativo do bloco da gpu para as memorias encaixaram ou eu não estou enxergando direito?
Amazing, as always. Where can I get one of those angled PCI-E adaptors? Looks so clean, although I'd need one that can take 3x8pin..
Where did you get that plate that you installed at 4:20?
I can’t find words, this is amazing! I wanna use this case too, for my first custom loop. How u managed to synchronize all the fans, water blocks and pumps?
I really need an inverted version of this case.... Lian Li please make inverted version please for people who have to put the PC on the right side of their desks.
The motherboard color white and this pc is full full full amaziiiiing
hello sir bricket what did you use to install the reservoir pump.?!
@ 4:15 where did you get those rad side hider plates? Im really interested and doing That hope you can get back 🙏🏼
Where goes the connection on the right from the side radiator?
omg, u have so many parts just standing there. spare me one i need it in these desperate times TT
Probably not enough to cool an i9 13900K and rtx 4090? Absolutely gorgeous build.
anyone know what the GPU bracket is? Awesome work again
Beautiful build. Would you mind sharing where those radiator covers that you are sliding into the top and bottom of the case are from? Are they custom made?
Yep they are custom made from strips of ALU. Most hardware stores should have them. Then you can either paint of vinyl wrap them.
@@GGFEvents Awesome! Thank you for sharing!
@@GGFEvents would you have messurements or a stencil to share? :)
Please do a Winter One.2 build for your next SFF series!! Your are the king, show these other builders how its done
This might be a silly question, but what is it you used to hide the radiators at 4:16 ?
How do you change the water if filling is up front?
How did you get the FLT 120's to be that silver color?
about the back plate of the active water block, and note that ekwb sell it in silver color, where did you get the white version or was it a mod made? 🤔
Just beautiful!
That FLT 120 DDC pump rear end looks different than the normal one. Is that custom or something new from EK?
Just. Beautiful.
Man great video again!! I just love your builds! I've been diging through a bunch of them, and I've seen you often use this 180 degress for the gpu power, where I can find them? Also, can I use them on a regular GPU? Or just the ones with WC?
god I hate this channel...lol the perfection and beauty of every build is next level. I just get to sit and drool...like us common folk!
How can the top and buttom radiador comeback the water? i dont see the second tube
Do you have a count for each of the fittings? My shopping cart is now more than the cost of my 3080 12GB lol
Does the case come with those 2 panels you put on the top and bottom next to the radiators?
Im literally obsessed with this build so imma answer a few questions from fellow ytubers.
Runs:
Top FLT goes side rad, to the back(offset) towards the top rad, top rad to CPU, CPU back to pump
Bottom FLT goes down along the bottom rad to the back in/out rad, GPU and back to the pump
you can get the flow by following the direction of the collant on the CPU/GPU blocks and where its coming from
Rads debate:
Yes 2 rads for the CPU easily, the GPU + the active backplate with 1 singel PE240 I dont think it ever reaches >40-45c at full blast OC too. I have a 5900x with an 240 EK basic on the same case(side mounted) it handles the CPU well but under full blast it reaches 85c so I can only imagine a better DDC pump plus a 2nd PE240 keeps it at max 65-70c. There is also a massive difference in temps between all cores at 3.9 or 4.3ghz so having a second rad there will get you more performance for the same temps.
Air Intake:
Having the FLTs instead of 2x140mm changes little to nothing when it comes to watercooling - a MoRa doesnt get any other "fresh air intake" and I believe performs quite well with just the rad fans. Same goes for the o11 mini watercooled - its all glass 0 intakes...great temps with 2x360
One thing i see nobody say is the excellence in cable managing that beautiful box having 2 pumps and 1 lianli controller.
GGF the OG!! Masterpiece!
Thank you for the help :D
Those covers (top and bottom) you put in at the end of the build. Did you make them yourself? Need to buy those in black. Lol
Hi! What are the temperatures for this build? Perhaps there is no such data?
The blue/pink was impressive enough, but when he made it all white, that was just 😍👌
love ur builds, it look awsome somehow white case not practical would love to see it as it is in black case. big tumbs up
this build is sick! I was looking into building in the 011 Mini
would you mind giving me a breakdown of different fittings used and qty please?
would like to know as well just to estimate cost of it
Where is the hidden outlet/inlet from the back radiator routed?
Can you run dual d5 pump res combos in the same loop?
ideal build
Simply Amazing.
What is the anti-sag bracket that is attached to the fan & radiator??
Amazing 😍😍😍😍
just amazing
Ever done builds with air? Love this video!
Where can I find those inserts you placed to cover the top and bottom rads?
They were just custom made from strips of aluminum then vinyl wrapped
@@GGFEvents Awesome! just saw the other video where you go over it, it looks so good, I'm planning to get the O11 Air Mini for my next build and I wasalso bothere by the black spaces so I will try to recreate the inserts
do you make custom ordered systems for customers?
Very clean! Love it. Did you use soft tube on the hidden radiator connections in the back? Did you run them through the back?
you can see ZMT at 8:44 top left from the front top rad fitting :p
6:45 Does anybody know what the 180° silver adapter/ connector on the GPU is called ? The one to plug the 8pin cables into
Hey, any chance you could share which brand/color of paint you used to match the satin titanium ek fittings? I’ve tried many different kinds and can’t seem to find a matching color.
I'm curious, how many times did you have a loop leak on you for these builds? :D I'm hesitant to build a custom loop for that reason.
Did you paint the EK radiator to white? I don’t recall EK making white radiator
Yes
Beautiful case like the crystal 680x but with the flaws all taken out
Why 2 rads for cpu and "only" one for gpu been this part the hottets one? Cheers from Argentina 🇦🇷, really love your builds, the Black one is so nice too that i cant choose between them
CPU runs hotter most of them time. Esp a 5900x
how did you get silver flt 120 ddc?
you deserve more subs
Finally...as usual best build stuart..i wish someday i can have pc like this
Is itnpossible to mount a 240 flt with d5 pump and mounting brackets on the front?
Yes it won't fit. Must be DDC
2 radiators on the cpu?
Are the temps any better than doing a single loop?
I would prefer this configuration but with the black, no RGB aesthetic of the other one. Maybe a black, copper and silver theme, that would be awesome. This case is amazing!
This is awsome I've been looking at this case with a view to do a custom loop in the future. Could i ask though... could i pull the same off with an ATX motherboard? and could i use a corsair cpu water block with the rest of what you have used here. Thanks
You should do more content, compare the thermal's on the builds, show us which loop setups work the best and why
looks amazing~
Does the side panel still fit on with the GPU block terminals sticking out more?
How'd you fit the PSU? I have a similar system with a 3080ti, but had to re-evaluate and go up to the 011 standard size when I needed more room for an ARX PSU. Wound up going all black rather than all white, not going to lie yours is way more dope... possibly because it was built by a pro rather than me, but hey.
Love this build, I would love this as my first pc. Would you be open to selling?
Did you paint the backplate white? If so, can you share what paint you used? It looks really clean