Gas Training - Setting Up And Testing Gas Valves - Roy Fugler

How To Test Gas Valves
Understanding Gas Valves In Gas Boiler
Testing different types of gas valves.
Roy from Viva Training Academy talks about gas valves in gas boilers.
Ex Baxi Boiler Trainer talks about gas valves. Different types of valves and how to test them.
Roy Fugler
gas training gas safe gas training centre baxi training videos testing gas valves gas valve gas valve troubleshooting gas valve replacement gas training videos gas engineer training gas course gas controls gas safe training roy fugler roy fugler roy viva roy viva training

[@niallmcrory4054]

The resistance check guided me perfectly on to identify a faulty pilot burner solenoid (which I then swapped out avoiding the need to change the entire valve) on my Ideal Classic 350 boiler - thanks guys superb video - you are total life savers!!!

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@kurtjakes]

More of an installer myself but I've really enjoyed watching these boiler fault videos. You've taught me alot and put it in a way easy to understand!

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@kurtjakes]

@@AllenHart999 already subscribed, I've honestly learnt alot off yoir uploads. Been plumbing for over 19 years now and always learning something new!

[@AllenHart999]

@@kurtjakes Thank You

[@kurtjakes]

@@AllenHart999 if I could be cheeky and ask for advice/an answer. I've found its a common problem isolating worcester greenstar's electrical supply and then turning back on and blowing the fan? Have you heard of a way of preventing this happening? My mates a boiler expert and and says he just tells customers to be present when he turns them back on to witness the pop so they don't blame him lol. I've heard they've brought out a mark 2 fan now that doesn't have the problem but not sure if that's true? Thanks again for all your uploads.

[@colin5064]

Roy is a great trainer on these gas valves, he explained the working process and test to perform to check serviceability and integrity.

[@AllenHart999]

Thank You

[@squeakal3393]

One of the most comprehensive and informative pieces of content I have viewed. Thanks a million guys.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@steveincork3669]

Fabulous!!!. How I wish you tube could have been around 20 years ago from the point of view of referencing and refreshing previous training👍👍👍👍

[@AllenHart999]

Thank You

[@zeidahmed569]

Awesome stuff Roy and Allen. The more you teach the more you learn, the more you learn the more you teach. Thanks again for sharing, It is definitely caring 😎.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@davidproctor6359]

Amazed what we forget,. Alan big thumbs up for u reminding us, and big thumbs up for our kind , who spend time to revise.

[@AllenHart999]

Thank You

[@user-ly6ze5bf5i]

Roy's a great trainer, seems to have a great way of delivering a great lesson 👍Thanks for sharing allen.

[@marcusmurray4758]

Really helpful! I find having this level of technical knowledge about individual boiler components makes everything easier, especially when diagnosing faults. Thanks for another great video.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@rayc1503]

Outstanding guys, you always excel yourselves.
Massive Thanks to Roy, Allen and the rest of the fantastic Allen ♥️ team 👌.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@michaelstone6983]

Another amazing video guys really helping the transition from installer to breakdown and servicing!

[@AllenHart999]

Thank You

[@michaelrose7258]

Awesome yet again. Thanks Alan, Roy taking the time to do this

[@AllenHart999]

Thank You

[@georgerobinson576]

Thanks allen and Roy, its just great to simply understand those different resistances due to the voltages . as with alot of stuff its easy when you know it, but sometimes your too busy to stop and look.apreciate the vids

[@AllenHart999]

Thank You

[@samoneill326]

Thank you for sharing Allen. Great advice.

[@AllenHart999]

Thank You

[@ptibblesp]

Great Video as usual guys. Many thanks for putting these together.

[@AllenHart999]

Thank You

[@mixer7586]

Thank you for your time and effort in making this video.

[@AllenHart999]

Thank You

[@seppy6851]

Another excellent video guys. Keep them coming Very informative. cheers

[@AllenHart999]

Thank You

[@joenewman2190]

excellent presentation. very easy to understand. Thank you both

[@AllenHart999]

Thank You

[@jameshawkins5280]

Absolutely great video

[@AllenHart999]

Thank You

[@karimkhellat4491]

Great video, great Channel and two legends 👍👍

[@AllenHart999]

Thank You

[@patreynolds7717]

Must say hat off too you sir. Wonderful video and thank you for sharing. Regards from Ireland 🇮🇪

[@AllenHart999]

Thank You

[@jasonsimpson3348]

Another great video Allen keep em coming

[@AllenHart999]

Thank You

[@tomnone8378]

wow :) omg thats the way how i was learning about the boilers about 17 years ago:( now im in the Spain and spanish service manual reallllllly poor :( am still digging in english service manual... ps. thats the best film about gas valves THX for you're work

[@AllenHart999]

Thank You

[@ianmoody7039]

Great video ,very informative, keep up the good work.

[@AllenHart999]

Thank You

[@mcginn002]

Top man Roy excellent video very informative 👍

[@AllenHart999]

Thank You

[@oliverohara4246]

Fantastic video. Spot on lads.

[@AllenHart999]

Thank You

[@luckyo414]

Excellent video Roy. 👍

[@AllenHart999]

Thank You

[@leaturk11]

Brilliant video, keep um coming.

[@AllenHart999]

Thank You

[@predatorfzr]

thank's a lot ! great video very helpful.

[@AllenHart999]

Thank You

[@harrysadler8081]

Great one to Roy and Alan I've done my breakdown course with Roy at Baxi lots of knowledge

[@AllenHart999]

Thank You

[@jamesmartin7502]

First class no nonsense, thank you

[@AllenHart999]

Thank You

[@andrewshaw2694]

Excellent video!!

[@AllenHart999]

Thank You

[@davidkim8611]

Great video, thanks so much

[@AllenHart999]

Thank You

[@henrybartlett1986]

Great stuff.

[@AllenHart999]

Thank You

[@nightrider8918]

You guys are stars!

[@AllenHart999]

Thank You

[@me-js8um]

really helpful appreciate vids thanks

[@AllenHart999]

Thank You

[@steventhompson4340]

Really good video and very informative 👍

[@AllenHart999]

Thank You

[@ahmaddarwiche7453]

Well done good video useful information thanks

[@AllenHart999]

Happy New Year

[@John.les1]

Great video

[@AllenHart999]

Thank You

[@MichaelSmith-rw7et]

Excellent video.

[@AllenHart999]

Thank You

[@chriscox4664]

Brilliant video - that guy is brilliant 👌

[@AllenHart999]

Thank You

[@andrewcockshott5652]

Great video roy

[@AllenHart999]

Thank You

[@richardpurvis5272]

Great video, very informative and well delivered. The issue I find is actually finding resistance value information to be able to complete the tests. What is the best way to get the numbers? You would think every manufacturer would just put the values for each component near the front of their manual so it's easy to find. Thanks Gents.

[@Exatomos]

Thanks a lot! Managed to pinpoint a faulty coil on the EV2 of the STS 848. Are there any instructions on how to replace the solenoids on this model?

[@iqbalnuthoo1566]

Thank you very very very helpful

[@AllenHart999]

Thank You

[@keithjackman847]

Hi Allen , this video is fantastic , and informative and Roy as a way of putting it across brilliant please keep theses and other video's coming .

[@AllenHart999]

Thank You

[@marksenior1179]

Thanks again Roy and Alan, very interesting to see the evolution of the gas valve and some of the pit falls in testing them.

[@AllenHart999]

Thanks very much for your comment, please consider subscribing to support the channel 🙂

[@TheDickPuller]

Thanks Allen & Roy, very informative. Perhaps some close-ups on the pins testing would be useful?

[@AllenHart999]

Will do. Thanks

[@veronicahart450]

Wonderful

[@AllenHart999]

Thank You

[@GOTOVO1]

Welcome Allen!
I want to know if a Westen Star Condens gas boiler is the same as the Baxi Duo-Tec! After cleaning (acidifying) the Al-SI heat exchanger, the "Automatic calibration" will start, but after ignition it will throw away the flame! There's a new electrode in it! The videos are very helpful, thank you!

[@AllenHart999]

Thank You

[@BLOCKsignallingUK]

Excellent video. More close-ups please when you do the next one.

[@AllenHart999]

Thank You

[@KESFacilitiesLtd]

Cheers lads

[@AllenHart999]

Thank You

[@julianhawker7672]

Thanks, great video. :-)

[@AllenHart999]

Thank You

[@Bertie211]

You need to trademark “Me names Allen Hart” luv it when you say that❤

[@AllenHart999]

Thank You

[@steveincork3669]

Fabulous 👍👍👍

[@AllenHart999]

Thank You

[@antxonidas]

Mila esker. Thanks

[@AllenHart999]

Thank You

[@andyg4861]

Hi Roy does the second gas valve work the same way as the zero governor. I thought zero governors were negative pressure due to the fan sucking and blowing the gas onto the burner

[@AllenHart999]

Thank You

[@jordan9318]

Great stuff as usual. I've got a question if anyone knows and it's regarding the very first valve you worked on. I was working on saunier Duvall Xeon. Pilot would light but main burner wouldn't.
Question 1 How does the ignition lead send the signal to the pcb that ignition is present? Is this similar to flame rec?
Question 2 MI's indicated this was a board fault, but customer already had another guy fit a new board so discounted this. I checked connections on the lead and the lead itself but still no joy. Anyone any clues as to what was wrong.
I called glowworm but they advised that they can't give any technical help on this product anymore. Cant help but feel I missed something simple.

[@royfugler9971]

Hi Jordan, Yes it's the same as flame rectification. If the ignition is still sparking once the pilot has lit it could be either a bad earth connection or reverse polarity to the boiler (live to neutral crossed). If the spark had stopped once the pilot lights the Pcb has sensed the flame so could be main solenoid or solenoid lead, check if you have power going to the main solenoid once the pilot is lit.

[@jordan9318]

Ok Roy thanks for the info....

[@AllenHart999]

Thank You

[@mehmetaliciftci3495]

Hello, you are giving very good technical information. I wish you would add the description feature with Turkish subtitles, I don't know English. I write this translation as an English translation on Google and throw it away. It would be greatly appreciated if you add the Turkish subtitle option to your videos

[@AllenHart999]

Thank You

[@baffoxxx2117]

Hello, can I send photos of a valve?
I don't understand how to connect my differential pressure gauge to check the gas pressure.
Thanks

[@AllenHart999]

Unfortunately not sorry

[@baffoxxx2117]

Hello, my boiler has the following problem:
When I request domestic hot water, the boiler works correctly,
when I turn on the radiators the boiler starts with the burner at minimum power after a few minutes the burner starts to regulate, sometimes it stays at minimum power and then goes out. Please,
can you give me some suggestions?
Thank you

[@AllenHart999]

Thank You

[@davidproctor6359]

which helps big safety to all

[@AllenHart999]

Thank You

[@baffoxxx2117]

Good afternoon,
Questions:
1) Why does the gas valve have two coils (V1 - V2)?
2) Why do the two coils have different resistance measurements?
3) Do V1 and V2 open and close at the same time?
Thanks

[@royfugler9971]

Hi Baffo,
Thanks for the questions.
1/ The reason the gas valve has two solenoids is that one is the main solenoid and the other is a safety solenoid, in case one solenoid sticks in the open position or has dirt on the seat, the other would still cut off the gas.
2/ The resistance is different is due to the spring pressure they need to over come to open.
3/ Yes V1 & V2 both open and close together

[@baffoxxx2117]

@@royfugler9971 Thanks

[@baffoxxx2117]

Good evening, do the two solenoids V1 and V2 have the same function?
Why is the resistance measurement of the two solenoids V1 and V2 different?
Thank you.

[@royfugler9971]

Hi Baffo, One is the main solenoid and the other is a safety solenoid. The reason the resistance is different is due to the spring pressure they need to over come to open.

[@AllenHart999]

Thank You

[@baffoxxx2117]

@@royfugler9971 Thanks

[@stephenhudson4931]

The safety is a heavier spring because it is fast close.

[@baffoxxx2117]

@@stephenhudson4931 Thank You

[@rezuk1208]

🤩🤩🤩

[@AllenHart999]

Thank You

[@misbahchoudry4749]

sir .how r u ?
i liked your videos as the videos are informative to me. sir , i m trying my best to get admission in you academy in uk and i want to be an gas engineer . whats is to do for me to be trained by u ? please tell me.

[@AllenHart999]

Thank You

[@martinwei4406]

Hope Roy wear a microphone next time thanks for sharing Allen.

[@AllenHart999]

Thank You

[@mohsenkia3176]

It was a formative lesson but it would have better if it was zoomed in so I could see the gas valves better.

[@AllenHart999]

Thank You

[@SuperWayneyb]

👍🤓👍

[@AllenHart999]

Thank You

[@x91w]

10:50 Good

[@AllenHart999]

Thank You

[@philipbrown2628]

Yes, more tech stuff that manufacturers don't give you

[@davidproctor6359]

can you help how to advertise a business

[@davidproctor6359]

@@AllenHart999 wow thanks Alan defo circle back to you,

[@S.Trades]

Me names Allen Hart.....

[@AllenHart999]

😍😍😍😍😍

[@S.Trades]

@@AllenHart999 Top man! 👍💪💪

[@munetsikanyimo3010]

Make

[@munetsikanyimo3010]

.

[@themorgans1328]

Roy's a great trainer, seems to have a great way of delivering a great lesson 👍Thanks for sharing allen.

[@AllenHart999]

Thank You

[@WEYHARRY1]

Great video

[@AllenHart999]

Thank You