4Runner Switch Panel Plug And Play Kit | 2010-2023 | Yota X
HTML-код
- Опубликовано: 16 окт 2024
- ▼Shop the Products featured in this video!▼
yotaxpedition....
Looking for an easy way to wire in your aftermarket offroad accessories? Whether it's lights, Compressor, Fridge, Winch, make it easy with this full kit for your 5th gen 4Runner. Operate up to 8 different accessories from one switch panel. Eliminate your wiring mess under your hood and the need to run a bunch of wires inside with multiple switches. Installation is super easy with our bracket made specifically for the 5th gen 4Runner. Save your self the headache of wires and make things simple with this kit from Yota Xpedition.
Our Website and Socials
Website | yotaxpedition....
Facebook | / yotaxpedition
Instagram | / yota_xpedition
Tik Tok | / yotaxpedition
Just hooked this up and it cleaned up my engine bay soooooo much, a definite must have if you’re running 2 or more extra lights, compressor, etc. so glad I got this!
Good stuff! Glad you like it.
Wow! This is going to be one of the first things I get when I get my first 4runner. I think I could do this install. Great video!
Awesome! We're here if you have any questions
This is the video I've been wanting to see. I thought this was going to be a somewhat rough installation. This explains a lot of questions I had. Thank you. Going to the website now.
Glad we could help make things easier for you!
Very clean and well thought out!
Thanks Kai!
Saw a lot of comments regarding the Auxbeam, so remembered to comment after i tried myself.
I just finished the installation and used the 8 gang BA80 Auxbeam and it fits perfectly! By far the easiest install ive done 👌
If anyone has questions let me know!
nice! Did you use this bracket?
This was so good! Wish I’d have found this before I bought my bracket. This seems so much easier than what I had to do. Love the step by step. Very cool.
Thanks! If you ever decide to switch it up, we're here!
Great job explaining along with installation 🙋🏻♂️🥃
What a great video explaining everything in detail. This item will be my next purchase.
Thanks for the support!
So glad I saw this video. I wasn’t sure how the strobes would work 😅
Glad you figured it out!
Love it! But when will they be back in stock? 😅
Awesome video! How would you go about in installing a dual led/combo bar light into the fuse box? Would this take up 2 control switches on the Auxbeam panel?
Clean and simple logic. Good work!
Great step-by-step instructions and production overall!
Thanks! 🙌
Just ordered mine today, can't wait to get it and install!
Awesome! Thanks for the support!
Legit! Definitely nabbing one of these for my 4runner.
Thank you for being specific about using the inside fuse panel….was about to lose my mind until I found this video. I did use the acc fuse (7.5) just so I could have access on ACC not just on ignition.
are there any issues using the acc fuse?
Nope. Other than contorting to get it installed. It has been fine
Damn. I'm getting this for my FJ! 👍🏽
Thanks, I will be hooking mine up soon. Very informative. Great video, thank you.
Thanks! Glad it was helpful.
I just received my kit and plan on installing it this weekend. My question is this: does the on/off button on the switch panel entirely turn off power to the panel and connected accessories or does it only turn off the backlight? I would like one of the switches to control camp lights installed in the roof rack handles. I want to be able to use these with the ignition off. So my plan is to connect to an always-on fuse, at minimum, an ACC fuse, but I want to be sure that I can switch everything off. Thank you!
The On/Off button turns the unit on and off. So if you have for example 4 switches turned on and you hit the main on/off button, all 4 with shut off. Hit the button again and all 4 will turn back on. If you want the unit to always have power then you can hook up the single small red wire to either your battery or a fuse that has constant 12v.
I hope this thing works, just ordered it
This is a rebranded switch panel. These are half the price on eBay or Amazon and they are mass produced in china. Don’t fall for this!! Thank me later
Link?
Beautiful creation guys. One question because I’ve been waiting for Runnin4tacos to release their Auxbeam dash flush Mount panel. You’re system look similar almost identical to the Auxbeam 8 gang system (not sure if it was a rebranding, which it totally fine, your fuse cover is way nicer). Is the controller you have the same size so that it will fit the dash Mount R4T is making. Does your system have the Bluetooth capability as well? Thanks and nice job…..
Any updates on this question, as I have the same questions?
Looks like an AuxBeam 8 button to me as well. I’m pretty sure in the original video they use an actual branded AuxBeam 8 button.
Would you recommend soldering that connection to the fuse box from the firewall or are those crimp connectors pretty durable?
man, this shop is sooooooo good w/ details on install vids lol. if i ever bring my orp to PA, I'm getting something done haha.. BTW I dont' have an option to buy this product pre-assembled on the site. thoughts?
After this video came out we took away the option of having it pre-assembled. We don't have a lot of hands here in the shop and have to focus on other things.
Just got my kit and there are three extra brackets in the box that were not covered in the video. What are they for?
They are universal brackets if you're not using our 4runner specific bracket.
this may be a stupid question, but how do you determine which accessories (winch or lightbar) go to which amp fuse?
Look on the manufactures website and they should give the info you need. Look for how many amps your accessory uses.
Awesome Job on the install vid and product design! … Excited on purchasing the kit for my 4Runnner. I do have one question that you don’t cover during the installation; What about “Relays” that typically come with lights, etc ? … Sorry if you already answered.
All your relays are built into the system. No need for external relays in your wiring harness.
@@yotaxpedition… That’s great news and Thanks for sharing!
Does this kit accommodate space to mount an ARB Twin on the driver side as well?
I am only wanting to mount the ARB single, but I would also like to see a video or a new mounting bracket offered on the website that allocates space for the compressor.
We have a bracket that is blank and you can lay it out as you need.
Do the cali raised 40 lightbar have a backlight feature?
Awesome!
Hey guys, that’s awesome … do you have available a kit like this one for FJ cruisers ?
The 4runner bracket should work on the FJ as well.
Got it, thanks guys !
Great video
Thanks!
Can the different amp fuses be swapped with different amp fuses in order to accommodate the order in which u want ur accessories organized on the switch panel? Or do they have to be randomly scattered on the switch panel due to the different amps each fuse is? Thanks
can you use this bus with analog switches or does it have to be used with the plug and play feature?
This may be a silly question, but I want to run power to this from my aux battery for the accessories I am going to be using with this plug and play do you think I will be ok doing it that way?
Got a SR5 Premium, so far only mods is Blacked Badges, Hello Kitty Steering Wheel Cover, and Grill Lights with Blacked Out Grill Chrome Trim. Can’t wait to do more to it. Also it’s my Mom’s if you’re wondering why the Hello Kitty. 😂
Might need a Hello Kitty steering wheel cover myself LOL
Can I use the ARB CKMA12 air compressor with this?? It says on ARB's website that it has a maximum load of 32A and you guys only have up to 30A fuses on this. Any info is appreciated, thanks!
Yes you can! We've done this already with the single and dual compressor from ARB. On the harness, there is a purple wire. This is the wire to activate the compressor on/off. Run this wire to your switch panel.
@@yotaxpedition The dual compressor will be fine plugged into the 30A fuse??
Is it possible to have winch in/out controls with this switch panel whole still being able to use the factory winch controller?
Does this have a backlight for the buttons when none of the switches are activated? I just installed mine and love it except for the fact that I can't see it in the dark to know which button to press.
Hey Matt, Unfortunately this unit does not have a backlight when none of the buttons are activated. We are currently working on a completely new version that has new features that we hope to release before then end of the year.
@@yotaxpedition That would be awesome. It seems a bit unintuitive to have a panel used to control lights (I'm assuming this is the most common use case) without a backlight since you typically turn on lights in the dark.
Another potentially useful feature would be having the ability to long-press a button and have that turn on/off a group of lights. For instance if I long-press the bottom left button all the buttons could flash, i can press each button I want to assign to that group and they would light up steady. When I'm finished I long-press the bottom left again to set that group. After its set when I long-press that button all of the buttons I assigned to that group would activate. If I continued to press for a few extra seconds it would take me back into group assignment mode for that button.
If you do create an updated version do you plan on selling an "upgrade kit" for existing panel owners? The existing mount is awesome and the panel is great as well. Being able to buy and swap just the circuit control box would be outstanding and very consumer friendly. If you were able to incorporate a way to flash new firmware (if you're using a chip in there) to get new features or change the config myself then re-compile and flash again would be the best thing ever.
Hey Matt, the new unit is a completely different layout so both the unit and the bracket will need to be swapped out. I know, a pain. When the new one is released, shoot us an email with your order number for the old unit and we will help you out.
@@yotaxpedition Gotcha, makes sense. I trust it will be worth the effort to swap out. Also, thank you for making the buttons so clicky and satisfying.
@@yotaxpeditiondon’t you dare lol I literally just hooked this one up
I know you said you had Baja design light bars but do you have any product numbers for the specific ones your rocking on this rig. It maybe a dumb question but do specific light bars have the backlit function or do all of them. Cheers.
We have a 40" on the roof and a 30" on the bumper. Not all have back lighting but the S8 from Baja does.
Here is the link yotaxpedition.com/products/s8-straight-led-light-bar?variant=43547127677164
Appreciate the help guys. The fact that yall have responded back to me so quickly means a lot and I will definitely be shopping with yall in the future.@@yotaxpedition
🙏 Appreciate you!
Where is 5his bracket for purchase all fits on it vs just the fuse box
Here is the bracket for our kit. We also have a universal one where you drill your own holes. yotaxpedition.com/products/auxiliary-power-bracket-4runner-2014-2023
How did you put the fuse box cover back on after you plugged in the fuse in?
The fuse box on the dash? The lid no longer fits when you put an add a fuse in there
What fuse do you suggest plugging Baja ditch lights in using this?
It depends on the size. I would look at the manufacturer's specs and see how many amps the lights use and go from there
@@yotaxpedition thank you brother, one more question, are you aware of any after market own style dash panels that fit this switch? I recently bought one I thought would fit, but it seems your model is the only one that it doesn’t fit even though it looked the same size as the auxbeam. There has to be one
Hi so it's been a a few months now since you posted this video. I'm interested in punching one however there are many reviews out there that are negative as pertains to malfunctions and warranty issues, so since your install how has this product held up to the hype?
Mine was dead on arrival.
One word: ferrule.
Do you have this with the bracket for a 2020 Tundra or the same bracket will do? Thanks!
We're working on a bracket for the Tundra. Hopefully it will be available soon!
That's just an Auxbeam 8 gang switch, a maximum of 60 amps is some what limiting but not to bad. I have them in my Tundra and 4runner.
Auxbeam does not come in a full billet case. Though they may have similar features, this is not an Auxbeam branded kit.
Can this be word to the jump posts under the hood instead of the battery? My battery is inside under the driver seat but I have the jump posts under the hood along with the chassis ground
Yes that will work
This video says 2010-2023 but the website says 2014+ … I’m assuming it’ll fit my 2012?
will this switch panel work with the morimoto 4 banger wiring harness with some modification?
Yes it will. But like you said, some modification is needed to the harness.
I would like to connect using the engine bay fuse box. Which fuse do you recommend tapping into? 2023 4Runner.
If you want wont the switch panel to work only when the key is on then you want to find a 10amp fuse that only has power when the key is on. Some fuse locations wont allow the fuse tap to work because you will not be able to install the fuse box lid. This is why we ran the wire to the interior fuse box.
Will buying just the bracket come with the hardware and rubber grommets? Does say on the product listing
Yes it will come with the hardware and grommets.
@@yotaxpedition awesome, already ordered haha
Too easy guys. Please tell me a BantamX sPod version is next!
We will be working on a higher level set up.
Does your kit help with relay delete like the other brand?
Yes, the relays are built into the unit. No need to keep your relays on your wiring harnesses.
Will the AR-820 auxbeam fit on this mount??
How about for the Toyota Tacoma 2019 try off road? Do you have for this truck
We are currently work on a full kit for the Tacoma
The way he connected everything does that mean I don’t have to disconnect the battery?
@@mrovidio1 I just did mine without disconnecting the battery with no problem
I live in the Seattle area.... who / what types of places could I get this switch panel actually installed for me?
MULE expedition? They are in Issaquah.
Do you sell a kit for fj Cruisers?
The electronics will all fit perfect. The bracket SHOULD fit the FJ. I'm like 95% sure it will fit.
Do you guys sell bracket for Lexus Gx470???
Currently we do not offer one for the GX. We are working on Tacoma and Tundra right now.
No ox-guard used?
So i can connect all this to my regular battery?
Yes sir.
I just finished the install and when I plug into ing 10 amp and turn on the car I get all sorts of warning lights and errors, and says to take care of to dealer. I unplug the auxbeam cable and put original 10 amp fuse back in and everything goes back to normal. Any idea what’s going on ?
Ok so quick update, I figured it out so wanted to update the comment in case anyone else has this problem. My auxbeam is not from Yota but I did purchase the bracket from yota. The add a fuse was the issue. It did not come pre installed with a 10 amp fuse it only have one 5 amp fuse so when I plugged it in and turned acc on the circuit was open and threw codes. I took one of the spare fuses in the auxbeam cover, plugged it in and bammm. Everything works.
Can i use acc 7.5 fuse slot?
Will this work on the Lexus GX460 1:44
Do you offer shipping to Hawaii?
Currently we do not, sorry.
I need some help!! I try installing this today after watching many RUclips videos about the RGB 8 switch panel, man no matter what i did every time I have this connected to my battery my car wont start, if like the battery die or something. I thought I have the wires installed wrong, changed the wires and same problem. I did however got the panel to light up the first try but when I press the starter on my truck it wouldn't start. Anybody have an idea what's going on? also none of this videos tell you that if you install the add a fuse inside the cabin your fuse cover wont fit anymore, even with mini add a fuse wire. Please help!!!! I have a tacoma off road 2020
What tires are on that 4Runner? 😮
Rubber ones
How do you know which light gets wired into the gang box?
See what the manufacture of the light requires to be ran and go off of that.
whats the bluetooth app?
I installed it, but there is no power coming to the lights that I installed to the port/plug n’ play. I installed the red wired in the + and black in the -. What could possibly be wrong. I’ve watched this vid like 25x and have done some research and nothing has come up.
Could you please send us pictures so we can see how you have everything hooked up. We will help get this resolved. Shoot us an email at support@yotaxpedition.com
Did you ever hear back from these people?
I have a 2016 trail 4Runner and it was not this easy. lol. If you have the 20plus sure.
Why is it not that easy?
2018 TRD Pro here. Same.
Cabin fuse box is far more limited and uses compact fuses so you can’t plug-and-play into the harness. Once I plugged it into the ACC fuse location (7.5 amp), my entire head unit doesn’t function. Bought a full size 7.5 amp fuse to try but that’s something that isn’t mentioned and doesn’t seem to be an issue on the newer 4Runners.
Anybody have this switch panel yet? I’ve been looking for unbiased reviews. There’s none.
* WARNING * If you plan on installing this with the OE panel for the 4 RUNNER the switch offered with the kit will NOT fit. OE is very specific on which switch panels will fit.
Isn’t Yota Expedition’s just an unlabeled AuxBeam? They look very similar.
Not tracking on what you're saying
@@stephencarbajal5657 the 8 button switch that comes in Yota Expidition’s kit looks like an Aux Beam 8 button switch, just without the AuxBeam label. If I remember correctly they even use an AuxBeam switch in the original video. Seems like YE is getting the 8 button switches from the same place as AuxBeam.
@@christopherpeppers278 oh got cha
@@christopherpeppers278 possibly..I had to buy an actual Auxbeam. The one I got from Yota didn't work. I broke that thing down and compared the motherboard to an actual Auxbeam.......love the bracket and fusebox cover..other than that...cheap stuff..don't recommend