Counterboring with 3-D Fast Cut | Tech Lab Tuesday
HTML-код
- Опубликовано: 9 сен 2024
- This episode of Tech Lab Tuesday goes into detail on how to use the MGA-MIC Setting Micrometer to set up your cutter for counterboring. Dave Monyhan then steps up to the Guide & Seat Machine to demonstrate the cut.
Keep in mind as you watch that the head he is working on has very hard seat alloys.
Good video! This gave me a better idea of that sort of tooling I should be looking for.
Glad it was helpful!
Thank you!
Veri Nice video
How come the ball head was wobbling so much?
Nice
hello i have a kwik way master head shop machine the 3d cutter can use in this machine?
Great video. Have a question on valve seat driver when buying a seat driver do they fit snug to the id of the seat are do they fit loosely.
Hi Tony, your question is a good one! According to our tech department, the answer is "both." Speaking specifically about our valve seat drivers, they are made to cover a range of sizes, for example 1.000" to 1.125", so depending on where within that range your seat fits you may have a snug fit or a slightly loose fit. If you need a little more explanation, feel free to contact the Goodson Tech Department at 1-800-533-8010 or email tech@goodson.com.
Excelent
I have the same machine, can you advise me on fixing tables please.
i have the same machine what morse i need to use it
That tool wobble and chatter will never allow the valve to seal.
Nada que ver con este modelo quedo obsoleto