I've seen so many installs where the modder's station is all grubby and dusty but I love how clean and organised your station is, you even take a moment to make sure the screen is protected! It's so refreshing to watch.
DUDE you really are a pro. all your joints so perfect and shiny. Ive done so many switch now and i still cant get joints so clean. this method seems so fast!
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Trust incredible. Trying this method later this month. I’ve been doing the DAT0 on the back for a while now. Question, does it matter if even touch the trace line when trying to reach the Dat0? The darker area on top? Thanks again.
Led? If you asking about solder type, then I working with POS61, without a rosin channel inside. I'm not sure if it can be googled somewhere outside of Russia(
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
It's not just temperature that is important. The rating (power) of the soldering iron is important in that it maintains the temperature as you are making the solder connection. What you are soldering to will take the heat from the tip. The soldering iron must be able to keep the tip temperature at the correct value. This can change greatly from soldering an smd component to soldering to a pcb ground plane which will soak the heat away quicker. Also to factor in is the length of the soldering iron tip vs. tip diameter. Fatter shorter tips will be able to carry lots of reserve heat to whatever you solder. Longer thinner tips can run out of steam quickly and may not be able to maintain temperature due to the soak away being bigger than the soldering iron's rating. As a general rule 350 degrees I would regard as fast and dirty. Good punchthrough to allow the flux to break down oxidisation and melt the solder quickly. But in the hands of an expert.... As time is critical with smd components. Too long and you risk dislodging them or damaging the copper track. Too slow and you're not going to achieve a good solder connection. Personally I run at 370 and swap tips to suit the size and sink of whatever I'm soldering. Fast and dirty! But with an automatic standby temp of 150 to protect the iron plating on the tip. Once that plating goes, the copper coe underneath will erode away with every use. Soldering correctly and effectively is a science learned through years of practice. In my particular case well over 50 years.
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Can you provide a picture of the ribbon cable? I understand you can't give a link as to where you buy it but it's hard asking sellers if they have this without a picture hahaha
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
I've seen so many installs where the modder's station is all grubby and dusty but I love how clean and organised your station is, you even take a moment to make sure the screen is protected! It's so refreshing to watch.
Thank you) This is my main principle - the buyer should get after my work a still New console, as from the factory)
DUDE you really are a pro. all your joints so perfect and shiny. Ive done so many switch now and i still cant get joints so clean. this method seems so fast!
Thank you very much)
потрясающе) это просто идеальный камикадзе)
Amazing job. A video showing your soldering tools along with sharing some tips and tricks would be absolutely great. Subbed
Thank you) I have one or two video topics to shoot next, but I'll remember your idea too and maybe shoot it later)
Прекрасная работа, качество П.с с ГБХ привет)
Привет, спасибо)
Such a clean job and amazing skills
Amazing workmanship.
The DAT0 Mod is evolving 👌 Nice Work
That's what I call perfection.
@pro-modding Please answer. Where can we get the kamikaze ribbon cable with this kit?
Yes i would like some too!
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Thank you @@pro-modding
@@JoaoRyanPlimdid you find it
Great job! What is the model of your iron station?
Name or link to get that flex please
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Great job!
01:22 I didn't know that there is another B point next to the speaker jack. I thought it was on the back. How did you find out?
Hi, thank you) I didn't find alternative point B myself, I saw it on RUclips a long time ago, just like you saw in my video now)
Real nice work. Do you sell the flex cabel?
thank you) no, I don't
@@pro-modding :-). Off to Google it is
Off to Google it is. Hope i find it.
Respect! 👍
For those who asking this is Kamikaze v6s flex cable
Great work! Which soldering tip do you use? It seems to work pretty well
I use copper tips from Ali placed on top of a standard C210 jbc tip.
@@pro-modding thanks! I didn't know about those copper tips. Do you find them to be better than the c210 tip alone?
@@pedrocamara5622 Yes, pure copper = perfect soldering)
@@pro-modding nice, I have to order some of those to try them 😁
Trust incredible. Trying this method later this month. I’ve been doing the DAT0 on the back for a while now. Question, does it matter if even touch the trace line when trying to reach the Dat0? The darker area on top? Thanks again.
hello can i know the brand of your soldering led
Led? If you asking about solder type, then I working with POS61, without a rosin channel inside. I'm not sure if it can be googled somewhere outside of Russia(
0:53
Why was this part ground and covered with UV?
At this point in the third layer there is exactly the point DAT0. The UV mask covered everything except this point DAT0.
@@pro-modding Thank you the video was very helpful
Где такой шлейф взять ?
That is an amazing job. That flex is part of a kit?
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
what temp is your iron set to? looks great!
350 C
It's not just temperature that is important. The rating (power) of the soldering iron is important in that it maintains the temperature as you are making the solder connection. What you are soldering to will take the heat from the tip. The soldering iron must be able to keep the tip temperature at the correct value. This can change greatly from soldering an smd component to soldering to a pcb ground plane which will soak the heat away quicker. Also to factor in is the length of the soldering iron tip vs. tip diameter. Fatter shorter tips will be able to carry lots of reserve heat to whatever you solder. Longer thinner tips can run out of steam quickly and may not be able to maintain temperature due to the soak away being bigger than the soldering iron's rating.
As a general rule 350 degrees I would regard as fast and dirty. Good punchthrough to allow the flux to break down oxidisation and melt the solder quickly. But in the hands of an expert.... As time is critical with smd components. Too long and you risk dislodging them or damaging the copper track. Too slow and you're not going to achieve a good solder connection.
Personally I run at 370 and swap tips to suit the size and sink of whatever I'm soldering. Fast and dirty! But with an automatic standby temp of 150 to protect the iron plating on the tip. Once that plating goes, the copper coe underneath will erode away with every use.
Soldering correctly and effectively is a science learned through years of practice. In my particular case well over 50 years.
Très propre, bon travail
Merci)
where dit u get the kamikaze ribbon cable.. never see that one before :)
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Hello from where you get this kit ?
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Man I thought hard on where I knew this melody from, it's simon's quest - bloody tears
Can you provide a picture of the ribbon cable? I understand you can't give a link as to where you buy it but it's hard asking sellers if they have this without a picture hahaha
i.ibb.co/72SgV27/Screenshot-2024-11-21-170424.jpg
где они продают этот флекс? очень чистый
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
cool flat cable version, where i can find it ?
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Is sad that no one share that flex information.
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Impossible to find on Ali 😢
Can you provide the Link for the cable
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
Donde consigo el Flex
I can't give a direct link to the seller on AliExpress, because Nintendo constantly bans sellers and they have to post the goods more and more covertly. You can search on Ali for RP2040, a modchips model with a new flex - "3in1".
hace el proceso con la bateria conectada 😲😯
No) 0:20
You russian? I cant read telegram
yes
Crazy you did this whole thing without disconnecting the battery😨😨 was on edge
0:20 battery disconnecting
Where you got the cable from?