28:35 Yikes, i think your customer will bring it back soon the wire is touching ground. Also you can backup nand to your pc and compress is using 7zip or winrar it will become 64gb>600MB. You can transfer it to your customer sd card easy.
recently I was installing hwfly on OLED it went couple of times into hekate, but after a while it only boots to CFW instantly. I check and everything looks correctly beside of not usual D0 voltage. On the oleds I did in the past it was around 0.7-0.8V but with this one is 0.5V. I try to move small D0 PCB around but I only get this 0.5V. Did you had situation like this in the past?
Out of curiosity, is there a document or image that shows how to either restore damaged points or find alternatives for when one pulls pads on accident? I've got a couple Switch Lites that were part of a console lot with various pads that are damaged or missing. Also, i dont even think they used the right kind of solder. I've used cheap chinese solder before and it wasn't anywhere near that bad. I'm gonna laugh if the person used solder with an acid core.
How far goes your hotair station airflow to 200 when you say 100 I use solder wire from best and it works good ,but is not cheap like this solder in the video ,this solder costs maybe 1 dollar
He owns an expensive oled switch buy buys cheap Chinese solder and cheap Chinese 32GB memory card brand 😆 then the repair costs more than the savings 😂😂😂😂
Guilty as charged lol 😆. This was my mess but I no longer use that solder. I did get a new microscope as well as new soldering iron and solder. All I can say is a big thank you for fixing it and thanks for the vid to show me all my mistakes which I know is alot. Lol Thanks TvPartsWorld, you are a true Wizard in Ur craft. 🫡
Really great video!! Thank you so much for all explaination, with all settings about iron, solder, air flow. That is so detailed! Awesome job!
We love the OLED mods and repairs 😎
Excelent drilling and soldering job°!. motivational!
Greetings from Argentina!!
Great video! Noobie trying to install a chip. Practice on dead boards first before attempting an oled. So close 😂
Another great video, I'm looking forward to the next video. Greetings from Germany😊
Simply the best that is sure
28:35
Yikes, i think your customer will bring it back soon the wire is touching ground. Also you can backup nand to your pc and compress is using 7zip or winrar it will become 64gb>600MB. You can transfer it to your customer sd card easy.
Yaaay !
😳Even Chinese solder tin isn't that bad.. it looks like solder tin for gutters and installing copper pipes 😆🙄
It was s parkside Lidl soldering iron with the solder on that so U might be completely right. It was nasty looking tho lol 😆
recently I was installing hwfly on OLED it went couple of times into hekate, but after a while it only boots to CFW instantly. I check and everything looks correctly beside of not usual D0 voltage. On the oleds I did in the past it was around 0.7-0.8V but with this one is 0.5V. I try to move small D0 PCB around but I only get this 0.5V. Did you had situation like this in the past?
its very easy to break the screen fpc i found out >.> now im waiting for a few replacements to come in
Out of curiosity, is there a document or image that shows how to either restore damaged points or find alternatives for when one pulls pads on accident? I've got a couple Switch Lites that were part of a console lot with various pads that are damaged or missing.
Also, i dont even think they used the right kind of solder. I've used cheap chinese solder before and it wasn't anywhere near that bad. I'm gonna laugh if the person used solder with an acid core.
Yes, there is but you need to pay around $40 to get access for 1 month
global.wmdang.com/index/index/introduce/inviter/320267.html
How far goes your hotair station airflow to 200 when you say 100
I use solder wire from best and it works good ,but is not cheap like this solder in the video ,this solder costs maybe 1 dollar
Hi. My hot air station goes to 200.
If I mail you my oled switch can you modes for me and how much its going to cast me.
This console got big dad wire... (
😂
My. Customer. Tried. To. Modchip his. Oled. Switch. and. He. Broken. It. Let's
He owns an expensive oled switch buy buys cheap Chinese solder and cheap Chinese 32GB memory card brand 😆 then the repair costs more than the savings 😂😂😂😂
Guilty as charged lol 😆. This was my mess but I no longer use that solder. I did get a new microscope as well as new soldering iron and solder. All I can say is a big thank you for fixing it and thanks for the vid to show me all my mistakes which I know is alot. Lol
Thanks TvPartsWorld, you are a true Wizard in Ur craft. 🫡
People who own up to their mistakes and show insight are, in my opinion, the most likeable. 👍👍👍