Mini Bike TRIKE! All Cars And No Mini Monster Bike Make Ian Roussel A Dull Boy
HTML-код
- Опубликовано: 2 июл 2024
- Mini Bike TRIKE! All Cars And No Mini Monster Bike Make Ian Roussel A Dull Boy
roussels-custom-fabrication.m...
Shop our store today through July 9th to get 20% off of your order using the code word Blue
Follow along as we create this monster from the ground up. BIG Thanks to Evan at RCF Minibikes. Who doesn't love a mini bike!
IF YOU ENJOYED THIS CONTENT
🛸 SUBSCRIBE
🛸LIKE
🛸COMMENT
🛸SHARE
🛸SET YOUR NOTIFICATIONS SO YOU DO NOT MISS ANY NEW CONTENT
Ian worked and studied at a bronze casting foundry as a young man, where he learned to create models, armatures, molds and finished sculptural artwork in all mediums and finishes. Ian is fascinated by the artistic process of sculpture. He brings this knowledge to his car customizations, to his Full Custom Garage TV show audience, and now he brings it to you, his growing RUclips audience.
Ian's Address📪
I.R. (For Large Packages 📦 Make It Out to Mojave Post Office #122)
PO Box 122
Mojave California 93502
We also have an amazon store for you to shop some of the basics we use at our rural ranch!
www.amazon.com/shop/fullcusto...
Follow Ian and Jamie on Instagram👽
@Full_Custom_Ian
@Mrs_Roussel_
👩🏻🎨Follow Our Artist Who Created Our Hot Rod UFO Design on Instagram
@thechookyhand
👨🏻🎨Animation Done By The One and Only
@corvette.mike on Instagram
Music:
slip.stream/tracks/b14bfefa-c...
cadillac full custom garage classiccars california car show custom garage full custom garage ian roussel full custom garage season 1 full custom garage season 2 full custom garage season 3 full custom garage season 4 full custom garage season 5 full custom garage season 6 full custom garage season 7 full custom garage season 8 full custom garage season 9 volkswagen VW 
Авто/Мото
Nothing dull about Ian’s builds
I’ve never seen Ian do so much precision measuring, with a yard stick no less. I like the change of pace and project. I’m guessing the big announcement is that Ian will be performing 1 man fabricating show in Vegas while Jamie treats emergency patients with videos of the dogs and wild space music in the Sphere. Looking forward to the costumes
roussels-custom-fabrication.myshopify.com/. Shop our store this week for 20% off using code word Blue. We are back this week in spite of the heat and the big changes happening with us. We hope those of you that celebrate the 4th of July have a safe holiday and those of you on the other side of the Equator...Stay WARM. It is hot up here! We will be back next week with more content once the heat breaks. Until then stay cool friends! ~ The Roussels REMEMBER TO DROP THAT LIKE AND LEAVE US A COMMENT!!!!!! Thank you!
Congratulations on the move kids! George The GlassMan!👽👽👽👽👽👽
I'm surprised that you are out there doing anything in the heat.
@@rickywhite7578 Agreed. It is only going to get hotter and we want to get back in the shop.
Hopefully you got a good deal with full custom to release the show on youtube... after you reached one hundred thousand subscribers...
Those Lennox grinders are hard to kill. It would be interesting to see how long one lasts in your shop, I almost sent you one myself.
you’re still my favorite RUclipsr since day one!! I’ll always watch every video!! ❤ thank you for using the wheel on this amazing trike!
We finally found the PERFECT project for the steering wheel. We couldn't be more excited to use it.
Ian is the master of the Eyecrometer.
And the Bob Ross of Hot Rod auto body.
That and the Thumb-Bob…
🙌 …AKA the Plumb-bob…
As always cool content along with some pretty cool sounds…
Have you heard of (and you probably have) the band
YELLO and one of their songs is called…
The Great Race ?
Be a good soundtrack for one of your drive and reveal videos in the Dunes or out on some kind of track
Pretty sure the fans will DIG IT ✌️couple o frosty adult beverages and perhaps some other type of fun stimulants of ones choice…
💨💨🍺🍺💨💨🍺🍺💨💨🍺🍺
Loving Your Guys Ideas,the process and of course the end result of your Guy’s lovely Masterpieces …
✌️😎👍🇳🇿
I made one very similar to this back in 2016! It was 12ft long from axle to axle! I used the gearing from a 21 speed bicycle and doubled it with three derailers! The chain ran through a z pattern! The seat was low in the frame with the 13hp motor in the back like a v dub! My frame was made from thick wall 2and a quarter inch conduit tubing! It bends in an s pattern from the seat to the triple tree! And I hand made a springer style set of forks! I'm currently working on a mini C Cab trike! Love this guy's work!
Mornin all....Greeting Earthlein's ...what up space man !
Also Victor is a Madman and a Beast always keep you on your toes. Never a dull moment
Cant wait to see the new shop in Tehatchipi. We decided to stay for a couple days and total our car in the canyon. Bad winds the day we went through and it actually blew the car off the road. Otherwise it was a beautiful place. Hope it is what you are looking for.
I think that this mini chopper trike is going to be cool and fun when it's done. I think the Drag boat project was really cool and different from the other custom cars that you and Victor have done.
You just can't second guess Ian. Says he is a simple guy but I don't think so. Love to watch him do his magic.
Thank you so much Jamie for your detailed camerawork and tight editing. The intelligent questions are great too. Thanks Ian for the mold-breaking fabrication and techniques for the DIY fabricator. Its more than metal, its a way of life. Thank you both and bless you this Independence Day.
Thank you 🙏 😎 You see us!
Ian my man I just did a mini bike for adults and cut right in front of where the motor mounts and straight above and stretched the frame 8 inches. That way your not eating your knees bro
Ian’s thought process is like organized chaos. It’s entertaining to watch, and oddly familiar. Must be a gearhead thing. 😎
In the future if you create a fiberglass mold, to release it from the plug you can use air. Place random blow holes, and blow air under the edge of the mold as well.
Between the ages of 9 and 13 I was building chopper bikes with home made springer front ends. My dad got 200 springs from a bunch of machines they company he worked for was replacing. I finally ran out of those springs and couldn't find any like them so I stopped building chopper bikes
Music got me thinking, how about a 1/3 scale Ian Roussel take on the Munsters Coach?
can't help but be reminded of Ed "Big Daddy" Roth who built nothing but trikes after he moved to the high desert , except Roth was committed to the concept as serious transportation, thinking it the wave of the future in practical transportation.
It looks great so far Ian. Thanks for the video today. I'm building my own "Full Custom" shelf for my storage shed, and needed a break. Congratulations on your big announcement.
All work and no play makes for a dull day. Happy Independence Day to everyone
This is going to be awesome.
When I was a kid in the late 60’s- early 70’s I saw chopped mini bikes but never a mini bike trike
Amazing watching Ian work thru the design in his head!
I did some rat fink model kits as a kid. Watching you work on this mini bike trike it totally clicked something in my rat fink past. So I looked up rat fink model and MPC sells a Trick Trike Series on amazon. Lists decals and parts. Loving this project!
I absolutely love your hubcap of fasteners.My Dad had what he called"The magic box of goodies.We called it "Dad's garden of Earthly delights."It always had what was needed.
I love this building process! Can’t wait for the final results
Man watching Ian work it out and fabricate on the is so educational and therapeutic and the same time love it 🥰🥰🥰
As always, your work has shown to be unique and unexpected. At the same time, it does look like the classic big wheels three-wheel rider I used to have as a kid just as Jamie mentioned❤😊❤
I've always wanted to rehab a mini bike chopper. For a while I had a Kawasaki GPZ 305 engine tucked away without carbs that was small enough to squeeze into a mini bike chopper frame. My plan was to keep as much of the original chopper as possible but get it street legal and small. Never did. Finally sold off the engine to someone that needed a replacement in the LT 305.
Gotta go guys need to set up sprinkler on gravel road neighbors dusting us out bad will finish video later bev holder cheers 🥂 guys
I had to stop and wonder what you were doing a few times but it worked out great. Can't wait to see more of this build. Bayside New York is watching.
Im thinking your engine in backwards but i do like your thinking on a chopper i made one out of a kids tricycal on 13"car wheels with ace bars back in the 70s it was at ally pally cutom car show 😊✌👍
Is it in backwards? Thought the same thing
The purple trike you made i loved that trike EVERYTHING YOU BUILD IS BADASS IAN THANKS TRULY
Howdy Ian I Really like the videos and especially the TV show, No drama and No BS and not to mention I learn a lot even at 67 years old! Keep up the great work
Good to see you playing Ian - looking like a pretty cool thing you’re building.
Rock on if it clears the mental mechanism-enjoy
Sweeeet. It reminds me as a kid in the 70’s, my dad fabbed up a plate so that same style wheel was on my bicycle. And my brother fabbed up a side car for his ten speed.
An actual drum brake ! Me and Dad built one around 1960 and all it had was a screech brake !!! Don’t run thru water !!!! But it was great. 👍👍👍
Another mad scientist creative build to watch 😮
This is a fun rad little build! Sometimes it's just fun to mess around with a fun project. Can't wait to see this one come together.
Man Ian. I want the purple trike with the coffin tank. Sitting at victors lol. I loved that one
Always amazes me with his ideas and talents.
Ian best fabricator of all time!
This is a cool build start for sure. Can’t wait to watch it be built. Thanks for the channel!
Guy with most toys wins. It will be a nice addition to your collection Ian.😊
110 degrees Monday
Good night guys !
The cup holder is in the beverage of choice helmet.❤ great vid cant wait for part 2.
Love the project........I think you might need a bigger engine, the 212cc is a great engine, but 6 1/2 hp may not be enough. please consider this when building the engine mounting plate.
Or I could be wrong and it will work out just fine, thanks for the video. Nice work by both of you.
By far my favorite show not even close
Ian is a GOAT.
The master at work i have learned allot watching from aruba 🇦🇼
Got drive way wet no dust day late happy 4th guys 😊
That`s sweet and low Mini Chopper BAD ASS you go Ian TCOMITY
Cool build 👍😎
That atc is nice af. Best looking one I’ve seen
Ace McGee in the house. Mini bike chopper hell yeah I'm all in. I've had mini fever for a while now I have 10 bikes a couple of them actually run been procrastinating for a while I need to learn how to weld to go any with my mini bike endeavors thanks for the inspiration. you guys rock. Peace Love
Ian and partner allways good to see & watch . Nice show !
Cool break
Ian I've built a few bicycle choppers and tricycles with forks between 3ft and 4 ft long. More fun than stock bland bicycles, lol.
It's cute watching them try to tiptoe around the "secret", after they announced it on FB, and all the (not so subtle) hints about hating the heat. lol
also it's a Shepherd's crook.
LOL. Not everyone is on social media though.
Bought and sold 65 mini bikes of all kinds. Love seeing this !
Thanks!!
super fun idea!!!!!! I cant wait to see the finish!
Cool!!
Sweet!
Way to go rousell team a change of pace fabricating a trike now you can do whatever you want to do yay!!@@@@😅😅😅😅
Great build
I could watch this guy for hours
mini chopper trike? so cool. I want one.. very much worth watching after a 15 hour day.
We are happy you enjoyed it. Thank you for watching.
Looks great 👍👍
You go Ian , whatever you do will be cool.
Nice change of pace, thank you for the upload guys 👍
Awesome
awesomeness!
looks awesome
Always love watching your videos watching you work. I always have to subscribe for some reason or another and I always like as I said previously and now I've commented. Have a good afternoon folks. Love you guys whatever you do❤ My😊
Thank you!
I just can't wait to see Victor's Cadillac Finished I love the Build (car)
A supurb build…Love it.
Total Compliment on the 1st bit of welding music!
Thank you! Its a fun vibe!
Going to look badass 💯
Ian needs a big Dayton fan for his shop
Oh cool, full zip sweaters!??! Ordered!! Dig the mini-bike!
You are going to love it. Super nice quality! Thank you for your support!
Cool!
Hey Mike, love the chevy , great job...Ralph
Love it man!
Wow looking forward to seeing part 2
Soon. It has been crazy hot. We are excited.
Mighty interesting for sure!
I feel like its important to talk about the front of the springer forks. It looks like the bottom tube is pretty much parallel and inline with the head tube. You have mounted bar perpendicular at the end, the second tube fits in the middle of that bar, and the wheel fits at the top of that bar. This little bar adds trail to the steering, which is what you want for good handling, without that trail, you get a lot of flop, and its a lot of work when riding without that trail. You could even adjust the trail till you get it right by changing the length of that one bar on each side of the front of the forks where the wheel mounts.
Jamie, your such a wild child==the music chose is outstanding.. Have a great 4th!!!!
Mate very cool I built one out of a Honda ct125 it’s hilarious it’s done some very hardcore tracks here in Tasmania the vids are a laugh I just love the upcycle recycling builds just made a sidecar for a xt250 it’s terrible and brilliant hehe have fun mate cheers for your inspiration
Anticipation dang it happy 4th guys cheers 🥂 😊
🇺🇸👍🏼😎👍🏼🇺🇸 Fabing your own Minni SugarBear forks🤙🏼
Howdie from Canada 🇨🇦 Sk been watching ya for awhile and ya got my vote signed up for adventure and I know it's going to be fun keep it up don't have to be rich or poor just watching your project come alive thks for sharing with us mighty fine thinking time to spend building something like yours doing to many motor jobs so time to make it happin keep ya posted on my progress later 😊
Keep up the wild builds
Thanks for the video, I know your super busy right now ...much appreciated 👏
You are welcome. We are itching to get back to work, but the heat is impeding us right now.
....GREAT PEOPLE TO WATCH....IAN....JAMIE AND CAITLIN CLARK............
Love your work Ian and Jamie you rock
Thank you!
I had a 350 X like that one when I was 12 years old. Loved it.
So sweet! Giddy-up! Good stuff!
I INJOY YOUR SHOW ALOT, WAS WONDERING ABOUT ANY MORE ZEPHYR VIDEOS! HATS OFF TO YOU, SUCH GREAT WORK FOR A ONE MAN SHOP! GREAT VIDEOS! ADIOS....
COOL!!!!!!!!!!!!!!!!!!!!!!!!!
Welcome back I missed you guys ❤