How to use ATTI mode on all versions of MAVIC 2
HTML-код
- Опубликовано: 11 сен 2024
- In this video we show you how to use ATTI mode also known as attitude mode for all versions of DJI Mavic 2. DJI does not setup these aircraft be use ATTI but we found a few ways around it. We walk you through these tricks step by step. We also discuss why ATTI mode is important to use.
------------------------------------------------
Visit: www.SteelCityF... | Drone Training Anywhere In The United States
---------------------------------------------- ----------------------------------------------
**Steel City Drones Flight Academy offers complete drone training services anywhere in the United States.
-WE OFFER training services for all DJI platforms including the DJI M200 V1 and V2, Inspire, Mavic, and Phantom series.
-WE OFFER drone-introduction classes: Advanced drone flying, Law Enforcement and Fire Department Drone training, Commercial drone applications classes, Cell tower inspections with drones, and Precision agriculture using drones -such as golf course management.
-ARE YOU READY? If you are ready to take your drone capability to the next level, visit our website today!
Visit: www.SteelCityF...
That smart controller fits in that case, Just pull out the foam piece and slide it in nice and smooth 😯 👍.
Thank you very much !!!!!!
❤️ Good information Mavic 2 pro Atti mode and Opti mode ❤️❤️❤️❤️❤️💜❤️❤️
This method still works! (May 7th 2024)
Fantastic! That's what I came to look for!
I can not open the inspect tool at all (Windows 10: Ctrl-Shift-I)
Any advise?
@@udornyc Not sure, I used a Mac and worked flawlessly for me.
@@Fermen80 Okay! I am on Windows... Thank you!
Fermen80 confirmed that this still works in May 2024. However, I can not open the inspect tool at all (Windows 10: Ctrl-Shift-I)
Any advise?
I remember doing this in a much easier way. I wonder if this video is old or if the way I was doing it was old.
Seems like a very cool job.. where do i sign!
whenever I make this mod, I like to use a bit of fluorescent label maker tape and relabel the controller. Peel the label when I mod back
We have a similar issue but in reverse on a Mavi Air 2. You put it it tripod mode on the controller but when it flies is flies in atti mode and I would like to put it in Tripod mode so the speed is controlled in tight areas. Any ideas?
This explains why my craft will just go crazy ... That's when I do my best to bring it back and land it then restart the system.
Is there any interference with DJI warranty or Care-Refresh?
Good question. Yes potentially and take that into consideration.
DJI should give us that option, I use atti all the time. If you ever lose GPS signal, the bird will go into atti mode and you will most likely at that time wish had the opportunity to practice with it.
Daniel I completely agree. I explain to students that the aircraft is like a puck on ice in ATTI mode where it will take any momentum of wind of horizontal speed and continue moving in that direction until the pilot corrects its direction. Practicing in ATTI mode will help become a better pilot.
Has anyone done this with a Mini 2 with either the sport or cine modes?
The DJI Assistant software modification you describe does work on my Mavic 2 Zoom. I use ATTI mode to obtain smoother video shots as well as keeping my flying skills sharp. The only caveat is; ATTI only functions when using the Android Go 4 app. When I use my IPad I'm stuck with Tripod mode.
What firmware version are you on? I have one as well and the assistant 2 would not even recognize my aircraft.
@@SteelCityDrones I'm using firmware .01.00.0400. I had trouble getting Assistant 2 version 1.1.2 to recognizer my Zoom at first. I rebooted the drone and the software multiple times before the software would recognize my Zoom. Switching to ATTI mode is exactly as you show in your video.
Turning off downward vision positioning doesn't put you in attitude mode. I turn that off grequently when I fly low over water. GPS still holds the position.
@@ernieschatz3783 We have setup over 50 Enterprise dual and zoom and turning off downward vision puts the aircraft in ATTI mode every time. We know this as we train in ATTI mode on the customers aircraft.
@@SteelCityDrones If I turn off my all my obstacle avoidence, I still have GPS. Is it only Downward sensors to make it atti mode? In any case Much prefer that other Way you showed in the M2 app. Love the other parameters that pop up on my M2 enterprise . 👌☺
if i just turn off the mobile gps?thank you
Hi Guys, GREAT video thanks. Any idea where I can now dowload DJI Assist 2 V 1.1.2? Unable to find a single WORKING link on the web.
We have it for Mac. I uploaded it here for you. www.dropbox.com/sh/i13e3jvvj9xzuwd/AACif5amDc9-QDYwtNRGCB8Ia?dl=0
@@SteelCityDrones Thanks for the rply. Any chance that you might have it for Windows??
@@FEROXED Sorry I haven't used Windows in 4 years. I also never seen the windows version floating around on the net, it was always Mac.
@@SteelCityDrones Thanks, have a great day.
Found it here!! www.dropbox.com/sh/aputou7efk3pbu3/AAD2Vg5_ov0gL4BNf8MWfE1Ga?dl=0&file_subpath=%2FDJI+Assistant+2+1.1.2.573+2017_05_27+16_41_02+6e0216bf(b21de8d8).exe&preview=DJI_Assistant2_Installer_v1.1.2_20170527.zip
Multiple flight speeds mode are working. However my intelligent flight modes are not, "follow me" etc.
I do not even have the icon, below return to home, showing on the face of the DJI apt. Help!!
Intelligent flight modes are disabled in pilot with Mavic Enterprise. They are only available for Mavic 2 Pro and Mavic 2 Zoom (non enterprise version) in go 4.
Steel City Drones Flight Academy I have the latest Mavic pro 2. ...
Got no Phenoms nor ennerprise edition drone.
do you have a link to the older version of assistance its not on dji's website
They can be found by doing a google search. I can't link a specific page here but they are easily found.
@@SteelCityDrones Negative. They cannot be found on the web now.
Found one!
does this still work on the Mavic 2 ?
It’s not compatible any longer.
It still works! (May 7th 2024)
Does anyone know why they removed the attitude mode on these drones? It could be for a good reason.
They removed it because novice pilots may damage their drone, persons or property. It's simply safer to remove it.
with this can i fly on No Fly Zone?
No sir. You will need unlocked codes as appropriate.
Wich would be Manual Mode?
ATTI mode is as close to manual mode as you can get. Auto Height control is always there and can't be turned off.
@@SteelCityDrones thanks for the answer, but I know that.
I am asking for which number would be for Manual mode or Acro.
@@dennislobos No sure what you mean by which number. There is a mode switch on the controller that changes the mode from Tripod-Sport-Position hold. There is no Acro mode.
My M2P won't even connect to DJI Assistant 1.1.2
I also have a Mavic 2 Pro and this worked like a charm. Don't forget to uninstall all other versions of Assist, restart your PC then install v1.1.2
OH! and run DJI Assist as an Administrator
@@FEROXED Worked thanks
Windows instructions please..
Sorry we have not owned a PC in 5 years. The directions are the exact same though. The key is get the right Assistant 2 version.
My new magic pro 2 flys the same speed in all three modes. Help!
you need to enable Multiple Flight Mode in the DJI go App - under the drone icon then advanced settings
HI! is there a way to get atti mode for the new mavic air 2?