If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
Because this vehicle is an old one that first came out years ago it is probably the reason why it is all over the place, When you start to get deliveries of the parts you are itching to get building and there wasn't much of that but it is a lovely motor
Started building this lovely model when it was released in 2011, but only managed to get a few issues due to bad deliveries at the newsagents. Was so disappointed. Will certainly put my name down to do this model, along with my ecto 1.
I wish people would give me their models to build, I have no shelf space left anymore, but I love assembling anything...displaying is another matter. Iconic car, looking forward to following this build.
Hi Wayne.. Im doing the DB5 too up to issue 46 ... If you watch SKMR.. Steve has a download on his FB Paige for the screw chart.. And whats really wierd.. It at the last issue 85-86. You get the screw chart in the build booklet.. So if you download that PDF file will be more helpful during the build.. Joe . in the U. S... Ps: i do love all your builds on your channel too!
I built this years ago Wayne, my only advice is be very careful with the ejector seat mechanism, mine wouldn't lock into place until I did some alterations with it.
Hi Wayne I'm going to have to drag mine out the loft and get it finished off, got a bit further than you and ended up shelving it as some of the issues were very delayed and in back order for ages. Got them all eventually though, together with a screw comparison chart which you might have in one of your later issues. Regards. John
When I built this model ten years ago they sent out a screw identification chart later on because lots of people complained.. It was a 1to1 photo.. so it should be in one of the issues you have. By the way I have started building the Routemaster...fantastic model.
I hope this car become available to all my friends in England and Europe very soon. It was a challenge to build and a lot of fun. Congratulations on your 50,000 Subscribers. Outstanding Hard Work for you and your family.
Den habe ich auch mal zerlegt und wieder richtig zusammengebaut. War ungewöhnlich von der Anleitung her und manche Bauschritte waren furchtbar, aber letztendlich ist ein schönes Modell daraus geworden. Ich wünsche dir viel Spaß beim bauen. 😊 Sollte das Modell nochmal aufgelegt werden, würde ich mir ein paar Verbesserungen wünschen.
Hello Wayne I love this car and the movies. That's very impressive nice work on this Aston Martin DB5 57.12 cm long. I enjoyed this video on the build. 👍👍🤗😇😁😀😊☺🙂😎🤓🤑❤💝🚗
I still have the original screw guide. Very useful, but it only came in the later magazines. The final model is wonderful though. Getting the final stages of the bodywork together is challenging.
I've got this Wayne, the front but us a pig to put on so I've left it 3 quarters built so I,ll wait in interest to see how you tackle it ,then may finally finish mine lol
Hi Wayne, built this model when it first came out with eaglemoss, had problems with the screw identification but the finished model is excellent, very heavy, congratulations on reaching 50,000 subscriber's 👏
Just an FYI, you will be better off getting a pill box for the screws as there are more types of screw than compartments in the supplied box (27 types in total)
Great Video Wayne .. at least with the Routemaster build they clearly labeled the screws .. mind you they needed to, as there are well over 50 different screws used in the build! And a big congratulations on reaching 50,000 subscribers .. what have/are people doing? missing out on one of the best channels around!
I have every issue of the this I got back when it first came out, but I never finished it as the steering wheel broke and I was never able to get a replacement.
In the US, we were given a screw identification guide in the last stage instructions……. AND, you are going to have more types of screws than you have compartments in your screw box. I agree with Lou, too. Why did they make the box tray black? Strange.
I did this some years ago and it was the first partworks I ever attempted. I did have problems fitting the body onto the chassis in the final stage. It is still on display at home. It started me off on this type of model.
Congratulations on reaching 50K! Well deserved & I'm sure it won't be long before you reach your next milestone. Very surprised with this build so far. It seems unusual to have so many issues & steps so early on with so little to actually do. I'm sure it'll pick up soon though & you're bound to have the opposite problem of having too much to do in a short space of time. lol
Hi Wayne. Congratulations on 50k viewers. Let's get you to 100k! Why does this build look familiar? (Ferrari F40 - parts you get but don't use - I'll never understand the logic for that). I am disappointed though. It looks like, at the start anyway, that there are more plastic parts over metal. For a high-class car, you would think the seats would be plush fabric, and the engine all metal.
Hi Wayne I did this model when it first came out I did it week by week from the newsagent. There was a point when you built the passenger compartment you could not do anything for 5 weeks. It was a nice model at the end but a real pain to put together. If I was doing it again I would wait till I had it all and then do it all at once. When you get to the front wing there are indents with a bar across. On the real car these were holes. In the mag it said Aston Martin engineers passed the model even though the pictures inside the magazine shows the holes clearly. As a fellow partwork veteran I would say this was the worst one.
Wayne, I have two of these Aston Martin DB5's and I built one though I'm missing three pieces so I haven't fully completed it yet and I bought one that was made except the steering wheel section had broken off so I don't know how the heck I'm going to fix it but once you make these you will definitely have to find the room to keep one because they are stunning. I'm new to your channel and I've just hit subscribed so looking forward to seeing your work.
I built this back in the day. Watch out for the pedal. The wire break very easily and when you hit to the end, you need to put the front screen on before the front section. Other than that it a nice car.
I love the channel. I bought the Mustang and the Nissan models subs from your other videos. I liked this one but the cost seems so high for a plastic model. I must not be understanding Augora's pricing schemes.
I wish somebody would have given a second thought to making the screw box black as it is the same color as the screws. why make it harder to see the screws when you can avoid it? Do you think you will get another set of instructions when it comes time to use the parts you couldn't this time? or will they say "refer back to issue 1" I can't imagine the frustration you'd feel if you were getting these once a month and you couldn't do anything but stare at the packaging
I haven’t looked ahead Lou as I am trying to come across problems as a new builder would be seeing. I normally post instructions on the screen but from what I have seen so far it really wasn’t worth it lol
This is exactly why I never build this, despite the DB5 being one of my favorite cars....So many shipments that is "Here, have some parts, but nothing to do". Also....the hard plastic seats are kinda cheesy compared to most other models now.
I would love to build one of these models. The scale of the pieces, the detail, the mouldings, all look fantastic. I initially got interested in these kits when you began the Porsche 917k. (My favorite race car) I next took an interest in the Ferrari F40. But here's the thing...Your last post on the F40 was 4 weeks ago. Likewise for the 917k. Is this how long it takes to receive each new stage? I'd die of impatience. I notice that you have at least a dozen models in que. Is that to keep you from dieing of impatience? I don't think I could do it
I sadly couldn't subscribe to this in Dec2010 as i was still signing on at the time. So i couldn't putta desposit down forra weekly collection either. Sooner or later EM will relaunch it probs as online only
I've got to say, this model was one I was looking forward to watching and maybe even doing. But if I received so many packs that you can't actually do anything with, I'd feel ripped off. Thinking maybe Eaglemoss needs to reexamine what order they are sending these out.
Nice build. But the licenceplate of Luzern (Switzerland) has no colors. Its actualy red with white cross in left and half blue and withe in the right. Maybe you can paint it. Greets from Switzerland. ;-)
I Have built this years ago But i havent been able to do the last part the chassis because its in to parts and when you put the two together the screws dont line up
Hi Wayne who ever has sent you the model if he has all the magazines I'm not sure if it's one of the later mags that gives you all the screws so you can check they are the right ones
This is why I didn’t buy this kit. You have spent about £100 before you can really make a start on the car it’s self. My friend bought the route master bus kit which cost a cool £1,148 and he managed to sell it as a part finished kit for £20 What a joke.
If you enjoyed this video or some of my other content please consider pressing the SUBSCRIBE button and hitting the BELL next to it so you get notified when I release a new video. You will find all the links and information you want in the expanded video description. If you have any questions or comments please leave them below. You can also see my behind the scenes video logs on my Patreon at www.patreon.com/worldofwayne.
"Do you expect me to talk ?"
" No mr wayne I expect you to build..."
Looking forward to this one.
Because this vehicle is an old one that first came out years ago it is probably the reason why it is all over the place, When you start to get deliveries of the parts you are itching to get building and there wasn't much of that but it is a lovely motor
Started building this lovely model when it was released in 2011, but only managed to get a few issues due to bad deliveries at the newsagents. Was so disappointed. Will certainly put my name down to do this model, along with my ecto 1.
I wish people would give me their models to build, I have no shelf space left anymore, but I love assembling anything...displaying is another matter.
Iconic car, looking forward to following this build.
I built the original run Wayne, as a point to watch is glue the cars interior ignition barrel into the dash, as mine worked free, so be aware please 👍
Hi Wayne.. Im doing the DB5 too up to issue 46 ... If you watch SKMR.. Steve has a download on his FB Paige for the screw chart.. And whats really wierd.. It at the last issue 85-86. You get the screw chart in the build booklet.. So if you download that PDF file will be more helpful during the build.. Joe . in the U. S... Ps: i do love all your builds on your channel too!
It's fun watching you as you go through this build but, it will all come together in the end. I know it will.
I built this years ago Wayne, my only advice is be very careful with the ejector seat mechanism, mine wouldn't lock into place until I did some alterations with it.
Everyone has had issues with the ejector seat. Pain in the ass.
Hi Wayne
I'm going to have to drag mine out the loft and get it finished off, got a bit further than you and ended up shelving it as some of the issues were very delayed and in back order for ages.
Got them all eventually though, together with a screw comparison chart which you might have in one of your later issues.
Regards. John
I love all the Jame Bond Movies.
When I built this model ten years ago they sent out a screw identification chart later on because lots of people complained.. It was a 1to1 photo.. so it should be in one of the issues you have.
By the way I have started building the Routemaster...fantastic model.
Hi Wayne! Can't wait to see it finished! Great Video! Have a good one!
This is a great build, I put some tips and tricks I did whilst building it over on your Facebook page
I hope this car become available to all my friends in England and Europe very soon. It was a challenge to build and a lot of fun. Congratulations on your 50,000 Subscribers. Outstanding Hard Work for you and your family.
Den habe ich auch mal zerlegt und wieder richtig zusammengebaut. War ungewöhnlich von der Anleitung her und manche Bauschritte waren furchtbar, aber letztendlich ist ein schönes Modell daraus geworden. Ich wünsche dir viel Spaß beim bauen. 😊
Sollte das Modell nochmal aufgelegt werden, würde ich mir ein paar Verbesserungen wünschen.
Hello Wayne I love this car and the movies. That's very impressive nice work on this Aston Martin DB5 57.12 cm long. I enjoyed this video on the build. 👍👍🤗😇😁😀😊☺🙂😎🤓🤑❤💝🚗
I still have the original screw guide. Very useful, but it only came in the later magazines. The final model is wonderful though. Getting the final stages of the bodywork together is challenging.
I've got this Wayne, the front but us a pig to put on so I've left it 3 quarters built so I,ll wait in interest to see how you tackle it ,then may finally finish mine lol
Hi Wayne, built this model when it first came out with eaglemoss, had problems with the screw identification but the finished model is excellent, very heavy, congratulations on reaching 50,000 subscriber's 👏
Yea I had the same problem especially with front end.
Just an FYI, you will be better off getting a pill box for the screws as there are more types of screw than compartments in the supplied box (27 types in total)
Just like the F40 build all over again!!!
I'm on about stage 25 on the DB5, and recently finished the Agora Cobra. It's interesting to compare the two.
I love this build you will have alot of fun. I watched Scale Model Kit Review and he just finished it
Hopefully the screws will be better labeled through Agora Models versus the Eaglemoss Version
@@wbrownshadow Agora Model only works hand in hand with Deagostini Altaya/Hatchette Partworks and not EM at all
@@bedfordshiremodeller4491 well im sure he can find some help there somewhere is all im saying
@@wbrownshadow Yep
First release of This kit had a screw guide provided...Shame I did not keep it but have found many pdfs of it online.
Great Video Wayne .. at least with the Routemaster build they clearly labeled the screws .. mind you they needed to, as there are well over 50 different screws used in the build!
And a big congratulations on reaching 50,000 subscribers .. what have/are people doing? missing out on one of the best channels around!
This looks like a great build nd id love to do it but,all the random parts that you dont do anything with would do my head in
We are all praying for your son wayne,I'm sure things will be fine , FAITH - how about it Wayne ????
What's happened to his Son? 😢
@@bedfordshiremodeller4491 he has trouble with a collapsed lung, this is the second time this has happened.
@@billgriffiths1685 Oh shit i'm sorry to hear that my thoughts go out to him/his Dad
Congratulations on 50,000 subscribers . Good luck with this build .it's a great looking car just a shame there was so many problems with it
revolving badges are for UK (BMT216A), for France (the one ending in 62) and for Switzerland (the one starting in LU meaning Lucerne)
Congrats Wayne on the 50,000 subscriber's, wow what an achievement I'm very proud of you Wayne !!!
You need to go with BMT216A numberplate as that's 007's DB5 numberplate in the film Goldfinger. 😁🍸
I have every issue of the this I got back when it first came out, but I never finished it as the steering wheel broke and I was never able to get a replacement.
In the US, we were given a screw identification guide in the last stage instructions……. AND, you are going to have more types of screws than you have compartments in your screw box. I agree with Lou, too. Why did they make the box tray black? Strange.
it was very fowerful and fast for its size and era-4 litr and 389hp, and reached some 240kph or less
I did this some years ago and it was the first partworks I ever attempted. I did have problems fitting the body onto the chassis in the final stage. It is still on display at home. It started me off on this type of model.
Congratulations on reaching 50K! Well deserved & I'm sure it won't be long before you reach your next milestone. Very surprised with this build so far. It seems unusual to have so many issues & steps so early on with so little to actually do. I'm sure it'll pick up soon though & you're bound to have the opposite problem of having too much to do in a short space of time. lol
Hi Wayne. Congratulations on 50k viewers. Let's get you to 100k! Why does this build look familiar? (Ferrari F40 - parts you get but don't use - I'll never understand the logic for that). I am disappointed though. It looks like, at the start anyway, that there are more plastic parts over metal. For a high-class car, you would think the seats would be plush fabric, and the engine all metal.
Did this the first time around.Its a heavy lump.
Hi Wayne I did this model when it first came out I did it week by week from the newsagent. There was a point when you built the passenger compartment you could not do anything for 5 weeks. It was a nice model at the end but a real pain to put together. If I was doing it again I would wait till I had it all and then do it all at once. When you get to the front wing there are indents with a bar across. On the real car these were holes. In the mag it said Aston Martin engineers passed the model even though the pictures inside the magazine shows the holes clearly. As a fellow partwork veteran I would say this was the worst one.
If you are looking for a Screw Guide check out Scale Model Kit Review he made one for this build
Wayne, I have two of these Aston Martin DB5's and I built one though I'm missing three pieces so I haven't fully completed it yet and I bought one that was made except the steering wheel section had broken off so I don't know how the heck I'm going to fix it but once you make these you will definitely have to find the room to keep one because they are stunning.
I'm new to your channel and I've just hit subscribed so looking forward to seeing your work.
I built this back in the day.
Watch out for the pedal. The wire break very easily and when you hit to the end, you need to put the front screen on before the front section. Other than that it a nice car.
Finally got my first issue, about 4 months after I ordered it. I hope to god I’ll continue to receive these, but I’m kinda skeptical now
I have written how to find a screw guide on the next video check comments.
Loving the new build.
Stay safe all.
I still have some of the early issues in my loft …
When I built this they supplied a how to build dvd and a screw identification chart
"Ejector seat? You're joking." "I never joke about my work, 007."
I love the channel. I bought the Mustang and the Nissan models subs from your other videos. I liked this one but the cost seems so high for a plastic model. I must not be understanding Augora's pricing schemes.
I wish somebody would have given a second thought to making the screw box black as it is the same color as the screws. why make it harder to see the screws when you can avoid it?
Do you think you will get another set of instructions when it comes time to use the parts you couldn't this time? or will they say "refer back to issue 1"
I can't imagine the frustration you'd feel if you were getting these once a month and you couldn't do anything but stare at the packaging
I haven’t looked ahead Lou as I am trying to come across problems as a new builder would be seeing. I normally post instructions on the screen but from what I have seen so far it really wasn’t worth it lol
Never got a screw box with the U.S. Release.
Their's ayoutuber called SMKR Scale Model Kit Reviews. He's American/he can help you with the different screw types for this build
This is exactly why I never build this, despite the DB5 being one of my favorite cars....So many shipments that is "Here, have some parts, but nothing to do". Also....the hard plastic seats are kinda cheesy compared to most other models now.
I would love to build one of these models. The scale of the pieces, the detail, the mouldings, all look fantastic. I initially got interested in these kits when you began the Porsche 917k. (My favorite race car) I next took an interest in the Ferrari F40. But here's the thing...Your last post on the F40 was 4 weeks ago. Likewise for the 917k. Is this how long it takes to receive each new stage? I'd die of impatience. I notice that you have at least a dozen models in que. Is that to keep you from dieing of impatience? I don't think I could do it
I really would like to build some of these models but I just couldn't afford to do them.
Hopefully, the Agora reinvention of this kit will have improved things.
Can't wait for this thing to be done...in 2025.
Wow. Can see why people gave up, £100 roughly for 10 issues and so little to do this far! Looks good though 😃
I got the James Bond car that my grandad had and I have finished the car now but there is like 86 parts to do
I sadly couldn't subscribe to this in Dec2010 as i was still signing on at the time. So i couldn't putta desposit down forra weekly collection either. Sooner or later EM will relaunch it probs as online only
Like video
That’s a shame… I was going to subscribe to this one.
Built this back in 2012. I waited until I collected all the issues and then started to build it, otherwise you'll have built parts everywhere...
2 problem I had is ejector seat and rear lights don’t stay closed
I saw your final build and do the machine guns pop out
Not on this model. They do on the new Agora model
That’s a shame they they missed those out that’s an iconic part of the car
I've got to say, this model was one I was looking forward to watching and maybe even doing. But if I received so many packs that you can't actually do anything with, I'd feel ripped off. Thinking maybe Eaglemoss needs to reexamine what order they are sending these out.
Nice build. But the licenceplate of Luzern (Switzerland) has no colors. Its actualy red with white cross in left and half blue and withe in the right.
Maybe you can paint it.
Greets from Switzerland. ;-)
the car was in cannonball run movie 1981
I loved that movie
Watched Stages 1-10 DB5, very informative. Are there the rest of the stages on you tube, if so, can't see them
Nope I only just started it. Aiming to do 10 stages a week
What happens when you mix a Ferrari F40, R2D2 and X-Wing together? You get a Austin Martin DB5 Bond edition :-)
I'm currently building this through Eaglemoss US. The printed instructions are baffling! So much of it is out of order.
Congrats on 50 k 🇦🇺🇦🇺👍👍👍👍👍👍👍👍🍺🍺🍺🍺🍺🍺🍰
Hi there, I bet you had the corgi toy as a kid. I had the lotus from the spy who loved me.
I had that lol
Their was atest run forra1:8 Lotus Esprit S1 from The Spy Who Loved Me 3or4yrs ago. Sadly it never got the Greenlight at all
Just get a tuxedo t - shirt 😁
I’m jealous - we never received the screwdriver kit or that intro magazine that lists all the parts😂🍸
I’m already starting to get cold feet lol
Ive have the lego DB5 lego exacty like the real car
Hi wayne I dont understand they give you parts knowing full well you cannot use them I got my ghost busters pins today
I have the lego version of this
Not much to do in those first 10 stages. You would have thought they would have planned it better!
I Have built this years ago But i havent been able to do the last part the chassis because its in to parts and when you put the two together the screws dont line up
Wayne, did you do something to the light in your studio? This video is darker than the previous ones...
Deliberately done that way so you could see the whites clearer
Wayne, I Want to build DB5, you are hurt me. Love Ashley
Hi Wayne will you be doing the hachette version of the titanic?
No but I’m doing the Eaglemoss one
Hi Wayne who ever has sent you the model if he has all the magazines I'm not sure if it's one of the later mags that gives you all the screws so you can check they are the right ones
Yep. I have it all here
@@WorldofWayneUK check which magazine it is which has all the screws
this model looks like it's going to be a headache like the DeLorean
Omg
Where can I bay this car?
It’s not available atm unfortunately
This is why I didn’t buy this kit. You have spent about £100 before you can really make a start on the car it’s self. My friend bought the route master bus kit which cost a cool £1,148 and he managed to sell it as a part finished kit for £20 What a joke.
If you're building the car then you are more likely Q.