How to Hard Reset Canon Printer Error
HTML-код
- Опубликовано: 7 фев 2014
- Learn how you can hard reset the Canon Printer when you have an issue.
If you are getting some kind of error when there shouldn't be, then you factory reset it and all the settings go back to the default state.
FOLLOW US ON TWITTER: bit.ly/10Glst1
LIKE US ON FACEBOOK: on. ZKP4nU
FOLLOW US ON G+: bit.ly/WfMmZN
www.itjungles.com
Visit Android Forum for Discussions: www.androidsnap.com 
Хобби
![Canon Pixma RESET - [English Subtitles] - Drucker zurücksetzen - [4K]](/img/1.gif)
The first person who is able to make a printer that is easy to use and never has errors will be the worlds first trillionaire.
+Ka Boom They can't make money if you never replace it.
try brother
Hahahaha you are right, Printers have got issues
Um no
This aged poorly.
Exactly what I needed. My printer is now working great! Thank you so much.
Thanks for the video. I just did it and it worked for our printer. My wife works from home and the printer is so important for her job. I was about to buy another printer for her but luckily found your video and it worked. Thanks a lot.
Amazing! I am so grateful that you made this video so we could rescue our printer! Thank you!
Your video is much more helpful than the Canon helpdesk! Thank you!
I do not usually reply to these kinds of videos, but: THANK YOU SO MUCH! I've spent weeks trying to figure this out.
Good Explanation , I was trying to get my printer for almost 9 months and cannot reset until I found this video. Great Job.
Finally! A way to make my printer work again. I was able to scan and copy but could not print. This worked great!
Ok, this helped on a MG4160, thank you. It's also a great tip on how to get the head carriage to move if "locked", once you hear the head move, pull the power cord and you can move the printhead. Thank you.
I watched 6 videos before yours and none worked! Your help worked! And my Canon wasn't even your model! THANK YOU! Appreciate the help!
Was your Printer a PIXMA 922???
Omg thank you thank you thank you! I have a big project coming up and my printer kept throwing this error code and nothing was working. Your instructions were simple and clear and I was able to reset it with no issues. Once again, thank you! 😄
Great! Works perfectly with the Canon MX925 and even removed the B200 error (temporarily at least...)
THANK YOU SO MUCH! Worked for my 5700!! :) you saved me during crazy mid-sems!! million thank yous mate!!
worked great for me on canon mx340 after spending HOURS trying to clear error 5200 following a paper jam that was corrected! Thanks!
You have the best video on RUclips regarding how to do a Canon printer hard reset. It works on both the mb and ib Maxify printers. Anyone who follows the procedure to fix a B504 error which is also at other RUclips videos to preview should follow up with IT Jungles video as well afterwards if the problem is not fixed. This video is even referred to by compatible ink resellers as a great video to fix many errors.
I had P, 1,0 error. Manual said "call the service centre". I decided to look for online help, and bingo, your video helped to resuscitate my printer. Thank you so much.
I was skeptical that this would work, I tried another similar method from another tutorial, and my Canon Pixma is a different version, a mg2922, very simple - however, IT WORKED. Can't thank you enough!
This helped me 8 years later. Thank you!
Thank you! With a seemingly simple solution you saved the day.
Tried everything for 5 days with my printer except this! It worked! Legend!
Thank you! I almost dumped my Canon Pixma MG3222 printer in the trash. Luckily I found your video and it help me fix it in less than 60 seconds. I've been going to the library to print for an entire month. I need to google more often LOL. Thanks again.
Directions worked perfectly! My Canon MX450 is now working again. Thank you!
IT WORKED. I have a Canon iX6820. Thanks for the video man, nice work!
Thank you fine sir for taking the time to share! Worked like a charm!
THANK YOU!!! It finally worked after 4 tries but when I heard the printer door open and start printing I was so glad. I didn't have to reinstall the driver either. It appeared to be a stuck print job. You'd think the error code would have said that instead of needing service.
You had to do several times? I've done it three times now and it hasn't worked. The error code, I think it's 5702, keeps popping up every time I try to print.
I find it very interesting that you say that printer jobs were stuck in it as I have so many problems with that printer that I'm confident there's a lot of things stuck "in the line" as I have to play all kinds of games with it every single time I try to print the most simple thing. It would be shocking to me if there weren't a bunch of jobs stuck in it.
I've already ordered another printer but if I can revive this one it would be nice to donate it to somebody who could at least use it to print a resume or something. I sell a lot of things online and cannot tolerate such erratic, unreliable behavior out of a printer as I've gotten out of this thing.
If there was something that you can recall that was different about the time that it finally worked for you please tell me so that I can try it before I bring it somewhere and ditch it. THAT, in itself, will be a challenge as the thing is so gosh darn huge!
I've considered taking it apart in bits and pieces so that I can sort out what is trashable and what has to be turned into the proper facility. I worked for Canon for many years and always had very high regard for their product until I purchased this thing.
Thank you!
Wonderful! You are so great! Fixed the printer in a matter of seconds. Thank you.
Thanks! This worked for me and I was finally able to reset the printer and add the printer back to my network.
THANK YOU!!! My printer kept giving me an error and only wanted to print from the rear no matter what I did. I'm so thankful I found you and this video. I was able to reset and it fixed my problem.
Glad I could help!
Hi after change ink cartridge it making noise
Error code 5100 , I followed your vedio guidance but it didn't work ? Please advice
THANK YOU for this! I have a Canon Pixma MG5220 and it was having endless errors, it's such a pain. I could rarely even print anymore. I'm still getting error messages, but at least it's printing sometimes.
It works! Got rid of error code B203 on a cannon mg6851 - thank you!! Nothing else had worked before I found this!!!
Brilliant.
Many thanks for this simple solution that even I could understand.
Have made a note where to look when B203 Error occurs again.
Very helpful for my MX439, thank you!
Thank you! You just saved me buying a new printer.
This worked for me, Thanks a lot.
Paula V.
Thank god. I tried another, completely different tutorial and it didn't work. This one did. Thank you.
Finally! the Flashing error message on ink levels are gone!!! Thank you, thank you!!!
gracias amigo me sirvio de mucho
Thank you friend, It served me a lot
First off, this is an excellent video in that it is the only one I have found that tells me the correct procedure for going into the reset (or maybe service) mode. I own a PIXMA MX892 that is displaying the error statement 6C10. Online, Canon says, "take it in to be serviced"; which will cost more than the printer to fix. Printer tells me "Printer error has occurred. Turn off power then back on again. If problem persists, see the manual." Well, I did all that and, of course, the manual has no listing for this error code.
So, RUclips it is. I found your video and my printer appears to be going into the mode exactly as you describe. However, no matter how many times I reset it, it does nothing and gives me the same error. I know that the error has to do with the waste ink tanks (pieces of felt that soak up the ink) and the cleaning cycle counter, that needs to be reset (I also know that I should clean the waste tanks if I reset it or it will get messy.
Do you have any clue as to what I can do? It is a nice, fairly new printer, I'd had to have to discard it. Thanks for any advice you can give.
Thanks so much it fixed my printer(Bri larson really knows her stuff)
Thank you! Your video helped me to solve a Canon Pixma MG5650 B203 Printhead error. Everywhere i asked they said printhead needed replacement and it costed more than printer price. Hard resseting the printer the error dissapeared and printer works!
THANK YOU! This helped. This was easy and quick. It worked on my MX880 printer. I appreciate your help. :)
Tonya Brewton i have an 860 and this worked for me as well! 👌🏽
Thank you so much for this video. I appreciate your time.
This worked on my MP640!! Thank you so much :)
Thank you, it worked, much appreciated
it worked for me too, but i had to try it like 5 times before i could finally get it to print!
It was a PIXMA MP495
TOTALLY GOT ME RUNNING AGAIN! Thank you!
EXCELLENT! Solved my paper jam ERROR Code 6000 immediately. Thanks so much.
i've been trying so many many ways solving MP287 blink P08 😭😭 finally found this, THANK YOU SO MUCH
this is very helpful, thank you. it works with my e510 canon printer
Wow! It worked well for the error code B201 on my PIXMA MX475 printer. Thanks a lot :-)
Thanks a lot for your instruction!
This hard reset helped me to restore the printhead of my Canon MG5750 printer.
You Da Man! It fixed my B200 error! Yaaay! Thanks!
Thanks, worked for me after several attempts for PIXMA MG6820 and fixed error 5011
Many thanks for posting this - it worked for my MP272 which showed the error message P02.
This fixed the problem. Thank you!
Great it worked for me. I brought the printer from United Arab Emirates and could not use for many days.I took it to the service who failed to fix the problem saying that this is computer problem and can't be fixed in India.
I have a Canon MG5320. The reset worked for me. Thank you very much.
Thank uuuuuu :") u out here saving lives
This video has helped me so many times. Thank you for making this video
Thank you very much!!! I was ready to buy a new printer! It works again!!!
Thank you. It fixed the B203 error on my MG5650 👍🏻
The greatest printer help video ever
Thank you Man! helped a lot with this video!
THANK YOU THIS WAS SO HELPFUL
Better than the canon support team! Thanks for this video :)
Works for my MG2550. You rock!
How would someone ever know how to do this on their own! thank you for the video
Fr!
Ancient Chinese Secrets
Manuel does show it...
😂
In the midst of being so angry at that overgrown beast of a b**** of a printer, you made me laugh! Thank you for that! ☺️
@jeff0516161
😂
In the midst of being so angry at that overgrown beast of a b** of a printer, you made me laugh! Thank you for that! ☺️
Thank you! This fixed my problem.
Your video always saves me!!! Thank you sir😊
Thank you for posting this. I think it worked on fixing my B203 error.
I just did that to my pixma canon 410 and it works thank you so much🌸🌸😘😘😘😘😘😘
Thank you so much. It worked on a Canon Maxify MB 5340. After changing an ink cartridge, I couldn't get rid of a 7100 print error. Much appreciated.
Worked for my printer! Thank you
It worked perfect, thank you very much. My printer is a MG5450
Thank you for your tutorial, because I was looking for a solution to my problem and finally I resolved that
this worked. had to do it twice, but it worked!! Thank you!!
Worked for my cannonn maxify mb2160. Thanks for sharing your knowledge 👍
I appreciate for the videos of removing error code B200 for Canon Pixma MP550.
A problem solved!!
Omg u just saved my printer. THANK YOUUUUUU
THANK YOU!!!! I have a Canon MX922 and had been printing a ton of stuff then error code 1660 cartridge not recognized - WTF?? I did what you said - BINGO!! I didn't have to install drivers or reconnect to my network! You Sir are awesome!!
I have the same printer but it doesn’t work I tried several times already :(
@@SaltNPepper80 I got fed up with that machine -it worked & quit again. So I bought a Brother MFC J5845DW - it has a years worth of ink out of box and works perfectly. I sell full time on eBay so I do A LOT of printing! As for your machine take out the printhead and clean it- you might be able to get it working. If not you have to replace the printhead. Good luck to you & stay safe my friend!
Omg !! It worked !! 😭 I’m so happy , thank you 🙏🏻🙏🏻
Thank you soooo much! Worked like a charm.
Thanks, it eliminated all of errors
Thanks Bro, your video helped me. 😍👍
WOW! Thank you SO much! It really worked!
Reset factory in LP4230 printer - Thank you for your update
The hard reset fixed my offline problem. Thank you!
Thank you, My MG8120 was just a short step from the dumpster when I discovered your site. Back in business (for now).
Thank you-I needed to reset my printer because I was selling it and this did the trick.
Thanks, this really helped out.
Thank you! I’m trying this in the morning!
This worked on the first try! Thank you!
Great, it worked. My printer is not identical to the one showen, but the buttons were there. Fabulous ❤
Thank you so much this sorted out my problem!
Reseting worked for my canon mg5650.I had error 1403. Thank you, thank you, thank you.
Yes , thank's for the clean up solution,,,,finaly solved the problem....
This got rid of my U052 printhead error! Thanks!
Thanks a lot. I have seen a lot of complicate solutions wich all did not work. With this simple trick, my Canon MP150 runs again!
Clear and easy steps. Hope this works, as Canon USA says they no longer service Pixma MX870 -
thanks for this video, it has solved my problems :)