OMG! You saved me from a year of frustrations! I had already spent hours trying all sorts of things using the Canon IJ Network Tool, and no luck! This was the right solution; thank you from the bottom of my heart! You rock!
On the newer PIXMA TS5150 it's "press 20 times" not 5 times. And it worked! Saving me a visit to a Canon engineer that would cost more than a new printer...
Thank you. I just packed my printer to send it to repair, then I saw this video. I unpacked and try the hard reset. It worked for my Canon G7040 perfectly.
Brilliant!!! It worked. My printer is back in business !!! Thank you very much!! Got rid of the awful message B203. Most helpful video. Again, Thank you!!!
Thank you! I really thought I would have to get a new printer!! I have a Canon Pixma MG6620 and this worked! I even bought a new printer head and ink, thinking that those were the problem!
YOU ARE THE BEST! Luckily it wasn't garbage collection this week as my Canon MG5420 would have become landfill. I had the dreaded B200 error message. After replacing all the ink cartridges (generic) and performing various reset versions, I gave up. Then I found yours! Your hard reset did the trick! Thank you so much for your video...I've subscribed!
Mr. Britec....you saved our life .... thought I'd have to buy another printer ... didn't find this re-set code anywhere until I found this video! FIXED IT IMMEDIATELY! (well...as soon as I got the sequence right anyway!! lol). THANK YOU!
My MG5750 indicated the code B204, which several sites said was termina,l but after following your tip is now back operational again, it took 2 or 3 attempts but I can live with that. Thanks a bunch.
How long did it take? It seems like a common issue now I faced the same issue yesterday and am really frustrated since I depend on this printer. Any solutions are greatly appreciated! 🙏
Update, it worked to reset the printer but when printing through USB cable it took like 20 minutes to print a tiny picture. Should I update all drivers and firmware, since it was reset? 🙏
Thank you! It worked for me. I didn't have an error message but no ink would come out of the print head. After thoroughly cleaning the print head no change. Did your reset and boom- printing full color again!!
That's where I'm currently at. Thoroughly cleaned printheads. Left it unplugged for 3-4 weeks. But still "error B203". Today is Cyber Monday 2024... Gonna give this a shot first, before buying a new printer. Prices are ridiculous.
I have just tried this for a B203 error code on my Canon MG7550 and IT WORKED!! I located the STOP button and marked it with a dry marker (only illuminates when power is switched on) so that I knew where to push before I pressed the power button. Then I followed all the steps, the only difference being that I had to turn the machine off myself as it didn’t shut down at the end of the process. Once I turned it on again....TA DAH!! Thank you for preventing another machine from ending up in landfill!
Aloha from Hawaii!! I followed your instructions to Hard Start my Canon Pixim 3122 Printer/Copier/Scanner AND IT WORKED!!!!! Thank you for a very easy instructional video!!!
Thank you very much for the hard reset tip. My Canon MP258 AIO was continuously giving B200 error message. I cleaned the cartridges, the print head, the head contacts, changed the cartridges etc... but nothing worked. Still the dreadful B200 error message was there. I was going to throw the printer & just then I came across your video & thought, “no harm in trying” & it worked!!!!! 😂 Bundle of thanks!
Worked like a charm! Thanks for this video - mine was a slightly older model - but your instructions worked great :-) I had refilled the ink cartridges but the ink LED were never turned off. I tried you method and it worked like a charm!!
Started getting blank copies after reinstalling software to correct other print quality problems. Did hard reset only to get blank blank copies, no what ?????
Brilliant tip, I have the Canon Maxify MB5150 which I thought I had broke by forgetting to take a sticker from a cartridge. Spent about an hour trying all sorts to get rid of the B203 message and this worked a treat. Thank you, I thought I was going to have to chuck this printer.
These video are so useful. Pity this didn't come a month ago, I just threw out my Canon printer after it came up with an unfixable error code overnight. The Canon forums couldn't help.
@@Britec09 so i tried this with my canon MG3250 and it didnt work. now what? after that teh printer turns off and doenst turn on, even when i push the button. after a whole hour i can turn it on. like the printer s taking a break XD
@@roxxwii4680 - Same here with not working. I have the MG5720. The heads seemed to be ok. It wasn't recognizing one cartridge (even when putting a new one in). It went through the sequence and then lost the driver. Ugh.
thank you... after several times... it worked : ) I remember something about the lights "blinking" faster or slower after you hold the reset button down. A year or so... I had to rest mine and I really didn't remember how. Thank you for your video. Sometimes, people have to reset several times before it will work... try to have patience people. It took me several tries since the night before but today after watching a part of this video... I tried again and it worked : )
Great - this worked for me. Printer would turn on but no lights and nothing on the display. Did the hard reset and it is working again. My printer- Canon Imageclass D 1120. Thanks!!!
MG5650 only the orange led and now it is good. thanks Ca marche pour ma MG5650, j'avais uniquement la led orange et rien d'autre. J'ai fait la manoeuvre. Je pensais que ça ne marchait pas car aucune réaction de l'imprimante. Et pourtant maintenant elle marche!!! merci
Thank you so much 😻😻😻😻😻😻😻😻😻😻😻😻😻😻 guys try this it works if you’re using a MacBook to do this trick it might not work because it didn’t work for me when I was using my MacBook so I use a windows 10 laptop and it work like a charm I’m so happy 😋
At first I was skeptical.. I've been plugging and unplugging. pressing random buttons and pulling out my hair... this was a godsent.godsend.. thank you!!
something was jammed on printer so the flash went on but when i removed the foreign object it wouldnt turn off. which meant i couldnt print anything. Your video help remove the error message and my printer is working again thank you so much
Great video, I tried your reset method on my Pixima MG 4250 problem but it did not clear the 1702 ink absorber almost full message. I’ve removed the ink absorber pads and cleaned them, any idea how to reset the counter please.
I really enjoyed this video but the problem is that the buttons are not shown unless it’s printing ; what do I do to hard reset my printer canon prixma MG7100?
Muchas gracias. Instrucciones claras y precisas me sirvieron para no tener que cambiar el cabezal en una máquina que tiene menos de 1000 impresiones. Thank you.
Hi there, this is a great video and I tried it. Unfortunately my printer Canon TS5051 didn't get fixed and is still just printing blank pages! I've tried loads of things. Any ideas why or what I can do other than buy a new printer please? Many thanks 😃
My pixma mg6650 keeps shutting down or losing power after a minute, sometimes less of it staying on. I did the reset, but it's not resolving the issue.
Any advice if you have soft buttons? they only light up for a second when I turn it off/ open the cartridge cover. I have an 1403 error code on MG7751 and tried cleaning the printer head, changing cartridges etc. Should I just bin it?
I took a piece of a sticky note and stuck it on the stop button for the moment everything lit up when turning on. After I did the pattern in the video and it apparently worked BUT after the last step it just was stuck in a cycle of power and error lights alternating.
Many Thanks for previous reply. Ok Please let me ask a differently. Is there a fix to access the ink cartridges, which are presently hiding to the far left and inaccessible? What happens: 1.On Powering up the printer: _ the green power light flashes a few times _amber ink alert light commences to flash in rep's of 8, (green power light becomes stable). 2. On opening the drop down door to access the ink cartridges: _ the triangle-amber light goes out. _power button green light begins to flash continuously until it's powered off. _the ink cartridges do not return to an access position. _they will alternate from one side of ink carriage to the other with each repeat of power on / off while the door is down. When printer is connected to the computer the printer app advises that printer is offline. This occurred after a low ink level warning. Hopefully there is a simple answer ??
I have a MG5722. The power turned after while printing. I tried the steps you provided but no success. I am unable to get power to the print. I tested the power cord and it has continuity. I switched to another power outlet knowing other devices have power. No success. I am at lost what the problem could be.
Did your instructions and now the power button won’t even power it up. Arrrggghhhh…. Time to unplug and start again w/troubleshooting. Glad to see in the thread this helped resolve their issue. For me, back to the drawing board.😭
Great video unfortunatly it did not work for me. My MG6620 will turn on but not stay on. I thought for a minute it was working but then it shut down again. Any other help would be great! Thanks for your video.
I have a Canon Pixma MG6620 that I purchased new about 3-4 yrs ago. I've been successfully using a no name aftermarket ink cartridges (4 sets) at 1/3 the cost of (1) Canon OEM Ink. I've tested the aftermarket ink for color and durability and they match the Canon ink drop per drop! But, all of a sudden, after a recent software update, my printer suddenly stopped printing altogether! 🤔 I've attempted deleting the printer from the menu and adding it again, cleaned print heads, cleaned roller, cleaned tray... Conspiracy?!
such clear instructions, thanks so much! I was able to get to the menu but any attempt to print or use any of the options to test the ink etc gets me back to the same error 6502. I used this printer with edible colors to print on edible paper. Any other suggestions will be much appreciated. Thank you much!!
thanks for video tried this on an MG4250 printer reach stage 4 - orange light flashing display screen blank? It doesn't shutdown automatically. If I power off and on again I get the same annoying error code 1303 paper jam. (Trust me have tried checking front /back shutting down etc no paper anywhere.) Any ideas anyone please?
Our Canon Pixel TS6120 Printer, is not working. The power light is just on, but the screen won't turn on/work. I hope you can help me fix it. Or should I let a professional do it?
Te gradesco mucho por la informacion me cabas de ahorrar mucho dinero creeme que fue de gran ayuda y sin tu orientacion no lo ubiese arreglado GRASIAS DEVERAS MUCHISIMAS GRASIAS
Hi I did all you steps to reset my MG6620 canon printer. It all worked as it should, but after the lcd screen appears, the printer shuts itself off again, any thoughts? Thank you
I tried this, and it worked first, I even managed to print a nozzle check pattern, then the next day, I turned it on and back to error code! Further update, disconnected the printer for a week, reconnected started it with the hard reset and it worked, haven't turned it off, will keep it in sleep mode, I'm worried it will go back to error if I turn it off!
HI THERE. I HAVE AN " MG 5655 " PRINTER SCANNER AND SUDDENLY IT STOPED PRINTING. IT ACTS LIKE IT'S PRINTING BUT THE PAPER COMES OUT BLANC. IT HAS HAPPENED BEFORE WITH AN OTHER CANON SO I'M BEGINING TO THINK THAT MAYBE IT'S DONE ON PURPOSE. LIKE IT STOPS PRINTING AFTER A CERTAIN AMOUNT OF PRINTS. IS THERE A WAY I CAN FIX THIS ? THANK YOU.
Sooo this stays on the blank navy screen and doesn’t fully shut down. The on and error lights continue to flash. Do I wait several minutes or just redo the process?
Hi ... tried this on a mg6863 but not much happening after pressing 5 times the stop button and releasing the on button ... is the procedure for the 6853 slightly different ? Many thanks
I have followed you example several times but the message that is on the printer screen states: B200 Printer error has occurred. Unplug the power cord and contact the service center. What is you recommendation?
Hi, tried this and another method (very similar) on my MG2500 (no screen/display) but after the first step of pressing the stop button 5 times, when it stops, if I press the power button again it simply turns off. Any idea on what to do? Thanks xx
![Canon Pixma RESET - [English Subtitles] - Drucker zurücksetzen - [4K]](/img/1.gif)
Wonderful! Whenever I was left out of options I only go through your video and always findthe best way to solve my problem.
OMG! You saved me from a year of frustrations! I had already spent hours trying all sorts of things using the Canon IJ Network Tool, and no luck! This was the right solution; thank you from the bottom of my heart! You rock!
On the newer PIXMA TS5150 it's "press 20 times" not 5 times. And it worked!
Saving me a visit to a Canon engineer that would cost more than a new printer...
It is absurd that Canon makes its customers jump through such an obscure reset process. Ridiculous. Thanks for the video.
100%
Exactly I’m so mad with this shitttt
I’m going to sell the ts3120 et looking for Panasonic or other brand
This is too absurd as technology
Genius!!! 😁 After battling for 3 hours, I found this video. It worked the very first time.
Thank you. I just packed my printer to send it to repair, then I saw this video. I unpacked and try the hard reset. It worked for my Canon G7040 perfectly.
Brilliant!!! It worked. My printer is back in business !!! Thank you very much!! Got rid of the awful message B203. Most helpful video. Again, Thank you!!!
40 seconds into this video my printer is working, thank you, Canon MG2950
Thank you! I really thought I would have to get a new printer!! I have a Canon Pixma MG6620 and this worked! I even bought a new printer head and ink, thinking that those were the problem!
YOU ARE THE BEST! Luckily it wasn't garbage collection this week as my Canon MG5420 would have become landfill. I had the dreaded B200 error message. After replacing all the ink cartridges (generic) and performing various reset versions, I gave up. Then I found yours! Your hard reset did the trick! Thank you so much for your video...I've subscribed!
Mr. Britec....you saved our life .... thought I'd have to buy another printer ... didn't find this re-set code anywhere until I found this video! FIXED IT IMMEDIATELY! (well...as soon as I got the sequence right anyway!! lol). THANK YOU!
My MG5750 indicated the code B204, which several sites said was termina,l but after following your tip is now back operational again, it took 2 or 3 attempts but I can live with that. Thanks a bunch.
Thank you so much. Fixed my printer with your video. I really appreciate it.
Cannon mg6620 PIXMA would turn on briefly, then power down. Did this.....fixed!! Thank you for saving me a new printer!!!!
How long did it take? It seems like a common issue now I faced the same issue yesterday and am really frustrated since I depend on this printer. Any solutions are greatly appreciated! 🙏
Update, it worked to reset the printer but when printing through USB cable it took like 20 minutes to print a tiny picture. Should I update all drivers and firmware, since it was reset? 🙏
Thank you! It worked for me. I didn't have an error message but no ink would come out of the print head. After thoroughly cleaning the print head no change. Did your reset and boom- printing full color again!!
That's where I'm currently at. Thoroughly cleaned printheads. Left it unplugged for 3-4 weeks. But still "error B203".
Today is Cyber Monday 2024...
Gonna give this a shot first, before buying a new printer. Prices are ridiculous.
I have just tried this for a B203 error code on my Canon MG7550 and IT WORKED!! I located the STOP button and marked it with a dry marker (only illuminates when power is switched on) so that I knew where to push before I pressed the power button. Then I followed all the steps, the only difference being that I had to turn the machine off myself as it didn’t shut down at the end of the process. Once I turned it on again....TA DAH!!
Thank you for preventing another machine from ending up in landfill!
Aloha from Hawaii!!
I followed your instructions to Hard Start my Canon Pixim 3122 Printer/Copier/Scanner AND IT WORKED!!!!! Thank you for a very easy instructional video!!!
Thank you so much. Worked perfectly first time. Was about to throw printer out and buy another one! Greatly appreciate your video.
Sweet it worked! who needs a darn manual? TY for your help!
Thank you very much for the hard reset tip. My Canon MP258 AIO was continuously giving B200 error message. I cleaned the cartridges, the print head, the head contacts, changed the cartridges etc... but nothing worked. Still the dreadful B200 error message was there. I was going to throw the printer & just then I came across your video & thought, “no harm in trying” & it worked!!!!! 😂 Bundle of thanks!
worked awesome! who needs a darn manual? TY for your help!
How do you reset it when the Stop button is a touch rather than a physical one? I had error B203 and can't get rid of the 'refer to manual' message.
Worked like a charm! Thanks for this video - mine was a slightly older model - but your instructions worked great :-) I had refilled the ink cartridges but the ink LED were never turned off. I tried you method and it worked like a charm!!
Started getting blank copies after reinstalling software to correct other print quality problems.
Did hard reset only to get blank blank copies, no what ?????
Thank you very much!! I've gone round in circles for days and this has helped resolve my printer problem
Thank you SO much - this got my MX920 running properly again 🥰
Thanks man, is fixed by your explanations, Hi From France.
Thanks soooo much!!! Mine worked after trying and watching videos for days
Omg, I was getting ready to throw my printer out and buy a new one ...this worked ... It reconnected wirelessly instantly..,thank you so much!
I can't believe this worked for my old PIXMA MG2922! Thank you so much! :D
just tried and it did not work. upon plugging in, the alarm light immediately comes on and stays solid
Wow! After struggling with my printer for 2 weeks, I replaced the ink but nothing until I found this video. Thank you!!!!!
It's not bad it just doesn't work.
Thanks!
Hi Ramesh, thanks for donation
Brilliant tip, I have the Canon Maxify MB5150 which I thought I had broke by forgetting to take a sticker from a cartridge. Spent about an hour trying all sorts to get rid of the B203 message and this worked a treat. Thank you, I thought I was going to have to chuck this printer.
Thank you so much!!! Your directions worked perfectly for me!!!
These video are so useful. Pity this didn't come a month ago, I just threw out my Canon printer after it came up with an unfixable error code overnight. The Canon forums couldn't help.
That's a real shame Douglas
Same here, lucky mine was under extended warranty. I took my 6550 back and swapped it for a TS5060. Works well.
@@Britec09 so i tried this with my canon MG3250 and it didnt work. now what? after that teh printer turns off and doenst turn on, even when i push the button. after a whole hour i can turn it on. like the printer s taking a break XD
@@roxxwii4680 - Same here with not working. I have the MG5720. The heads seemed to be ok. It wasn't recognizing one cartridge (even when putting a new one in). It went through the sequence and then lost the driver. Ugh.
Thank you very much. The fix did help getting my pixma mx310 to stop behaving erratically.
Thanks so much for your, clear easy-to-follow instructions
thank you so much,,,,,its work on my printer pixma TS5070......now my printer can be use.
thanks from malaysia
It worked on my Canon. Thank you very much..........
Thank you, was a lot of help and quickly sorted!!
thank you... after several times... it worked : ) I remember something about the lights "blinking" faster or slower after you hold the reset button down. A year or so... I had to rest mine and I really didn't remember how. Thank you for your video. Sometimes, people have to reset several times before it will work... try to have patience people. It took me several tries since the night before but today after watching a part of this video... I tried again and it worked : )
Patience is a virtue
Almost, but it never turns off after doing that procedure. After I power it off and on again myself it returns to it's previous error code.
That is exactly what mine is doing.
@@PoppyHarlow1350 and mine
yep me too
@@adamhale2526 There's another video about holding some buttons and what not. worked out.
@@muuubiee and a link to that video?
Not sure if it was coincidence or not but this cleared the E03 code on my ts3100. Thanks.
wow.. after weeks of frustration; this worked brilliantly.. many thanks
Great - this worked for me. Printer would turn on but no lights and nothing on the display. Did the hard reset and it is working again. My printer- Canon Imageclass D 1120. Thanks!!!
Just tried it on my mom's canon mx459 and it works!
WOW this video is usefull my printer use to can't print online but now it can THANK YOU SO MUCH!
Thank you - this worked. My Canon Pixma G1220 kept restarting print jobs and it was so frustrating and wasteful. It is printing smoothly now.
MG5650 only the orange led and now it is good. thanks Ca marche pour ma MG5650, j'avais uniquement la led orange et rien d'autre. J'ai fait la manoeuvre. Je pensais que ça ne marchait pas car aucune réaction de l'imprimante. Et pourtant maintenant elle marche!!! merci
Is it possible to return to factory settings for newer touchscreen pixma printers? 😐 Power is the only physical button, rest are "digital".
Thank you. It actually worked. So pleased.
Thank you so much 😻😻😻😻😻😻😻😻😻😻😻😻😻😻 guys try this it works if you’re using a MacBook to do this trick it might not work because it didn’t work for me when I was using my MacBook so I use a windows 10 laptop and it work like a charm I’m so happy 😋
Thank you for saving my time and money
At first I was skeptical.. I've been plugging and unplugging. pressing random buttons and pulling out my hair... this was a godsent.godsend.. thank you!!
something was jammed on printer so the flash went on but when i removed the foreign object it wouldnt turn off. which meant i couldnt print anything. Your video help remove the error message and my printer is working again thank you so much
Great! It worked with a Canon Pixma MG7550 with touch screen :) Just after a restart before the lighting error code...!!!
You’re amazing! Fixed my pixma pro 100 in 2 seconds flat.
Great video, I tried your reset method on my Pixima MG 4250 problem but it did not clear the 1702 ink absorber almost full message. I’ve removed the ink absorber pads and cleaned them, any idea how to reset the counter please.
I really enjoyed this video but the problem is that the buttons are not shown unless it’s printing ; what do I do to hard reset my printer canon prixma MG7100?
Muchas gracias. Instrucciones claras y precisas me sirvieron para no tener que cambiar el cabezal en una máquina que tiene menos de 1000 impresiones. Thank you.
You are wonderful. I fixed my Canon Imageclass in 2 minutes. Thanks.
Hi there, this is a great video and I tried it. Unfortunately my printer Canon TS5051 didn't get fixed and is still just printing blank pages! I've tried loads of things. Any ideas why or what I can do other than buy a new printer please? Many thanks 😃
Hi Have U done a Video on how 2 Reset a...
Canon Ink Monitor MG3650S Factory Reset
My pixma mg6650 keeps shutting down or losing power after a minute, sometimes less of it staying on. I did the reset, but it's not resolving the issue.
Thanks, you saved a Canon TS 3322 printer from the garbage can.
Any advice if you have soft buttons? they only light up for a second when I turn it off/ open the cartridge cover. I have an 1403 error code on MG7751 and tried cleaning the printer head, changing cartridges etc. Should I just bin it?
I took a piece of a sticky note and stuck it on the stop button for the moment everything lit up when turning on. After I did the pattern in the video and it apparently worked BUT after the last step it just was stuck in a cycle of power and error lights alternating.
Legit still works today!
Many Thanks for previous reply.
Ok Please let me ask a differently.
Is there a fix to access the ink cartridges, which are presently hiding to the far left and inaccessible?
What happens:
1.On Powering up the printer:
_ the green power light flashes a few times
_amber ink alert light commences to flash in rep's of 8, (green power light becomes stable).
2. On opening the drop down door to access the ink cartridges:
_ the triangle-amber light goes out.
_power button green light begins to flash continuously until it's powered off.
_the ink cartridges do not return to an access position.
_they will alternate from one side of ink carriage to the other with each repeat of power on / off while the door is down.
When printer is connected to the computer the printer app advises that printer is offline. This occurred after a low ink level warning.
Hopefully there is a simple answer ??
Great video @Britec09 Could you please do a video on seseting a Canon Maxify GX7040 printer? Thank You!
I have a MG5722. The power turned after while printing. I tried the steps you provided but no success. I am unable to get power to the print. I tested the power cord and it has continuity. I switched to another power outlet knowing other devices have power. No success. I am at lost what the problem could be.
Awesome video and it worked for me as explained...
Did your instructions and now the power button won’t even power it up. Arrrggghhhh….
Time to unplug and start again w/troubleshooting. Glad to see in the thread this helped resolve their issue. For me, back to the drawing board.😭
Just carried out a hard reset on my MG5650 printer. Thanks a million 🙏🏿
Great video unfortunatly it did not work for me. My MG6620 will turn on but not stay on. I thought for a minute it was working but then it shut down again. Any other help would be great! Thanks for your video.
Saved the day sir. Nice one.
Wht about non physical button like Mg 7550
I have a Canon Pixma MG6620 that I purchased new about 3-4 yrs ago. I've been successfully using a no name aftermarket ink cartridges (4 sets) at 1/3 the cost of (1) Canon OEM Ink. I've tested the aftermarket ink for color and durability and they match the Canon ink drop per drop! But, all of a sudden, after a recent software update, my printer suddenly stopped printing altogether! 🤔 I've attempted deleting the printer from the menu and adding it again, cleaned print heads, cleaned roller, cleaned tray... Conspiracy?!
Thank u worked for my ts 5150 model 😊
you saved my printer from there error message! thanks so much TS3122 here
such clear instructions, thanks so much! I was able to get to the menu but any attempt to print or use any of the options to test the ink etc gets me back to the same error 6502. I used this printer with edible colors to print on edible paper. Any other suggestions will be much appreciated. Thank you much!!
Thanks, but it didn't work for me. Keep getting error code B203.
Not clearing the 1660 code with off brand cartridge....any suggestions???
thanks for video tried this on an MG4250 printer reach stage 4 - orange light flashing display screen blank? It doesn't shutdown automatically. If I power off and on again I get the same annoying error code 1303 paper jam. (Trust me have tried checking front /back shutting down etc no paper anywhere.) Any ideas anyone please?
Excellent. Worked for me. Thanks
Does this work for ALL Pixma printers - or just that model?
Our Canon Pixel TS6120 Printer, is not working. The power light is just on, but the screen won't turn on/work. I hope you can help me fix it. Or should I let a professional do it?
On my 2520 printer, these steps just put it Off Line. How do I reset Ink Absorber counter after cleaning ink well.
Te gradesco mucho por la informacion me cabas de ahorrar mucho dinero creeme que fue de gran ayuda y sin tu orientacion no lo ubiese arreglado GRASIAS DEVERAS MUCHISIMAS GRASIAS
This one was so helpful and it work for us glad that I saw this
Hi I did all you steps to reset my MG6620 canon printer. It all worked as it should, but after the lcd screen appears, the printer shuts itself off again, any thoughts? Thank you
I tried this, and it worked first, I even managed to print a nozzle check pattern, then the next day, I turned it on and back to error code!
Further update, disconnected the printer for a week, reconnected started it with the hard reset and it worked, haven't turned it off, will keep it in sleep mode, I'm worried it will go back to error if I turn it off!
HI THERE. I HAVE AN " MG 5655 " PRINTER SCANNER AND SUDDENLY IT STOPED PRINTING.
IT ACTS LIKE IT'S PRINTING BUT THE PAPER COMES OUT BLANC. IT HAS HAPPENED BEFORE WITH AN OTHER CANON SO I'M BEGINING TO THINK THAT MAYBE IT'S DONE ON PURPOSE. LIKE IT STOPS PRINTING AFTER A CERTAIN AMOUNT OF PRINTS. IS THERE A WAY I CAN FIX THIS ? THANK YOU.
Thank you so much! It worked
Sooo this stays on the blank navy screen and doesn’t fully shut down. The on and error lights continue to flash. Do I wait several minutes or just redo the process?
Please help me for mg 2500 . If there's any resetting tool
Hi ... tried this on a mg6863 but not much happening after pressing 5 times the stop button and releasing the on button ... is the procedure for the 6853 slightly different ? Many thanks
I have followed you example several times but the message that is on the printer screen states: B200 Printer error has occurred. Unplug the power cord and contact the service center. What is you recommendation?
I have a MG7650. There is no stop button to access when the printer is off. Any idea how to do a hard reset on this model?
For the 5b00 error code stop needs to be pressed four times instead of five times after the initial third step in the hard reset process
My on button remains on but my printer screen is off and printer won’t start please help!
Hi, tried this and another method (very similar) on my MG2500 (no screen/display) but after the first step of pressing the stop button 5 times, when it stops, if I press the power button again it simply turns off. Any idea on what to do?
Thanks xx
I have the same problem what can we do next please help