Digital Logger Single Relay Combined with Kasa Smart Plug

#hamradio #remoteradio
Affiliate Links
Digital Loggers Single Relay - amzn.to/41uZ6Cc
Kasa Smart Plug - amzn.to/4f7rmh6
BNC Male adapter with (2) screw terminals - amzn.to/4fkyBmg

[@Bill-HRT]

***BIG MISTAKE!*** I misspoke when I said I connected a bnc to my Flex remote on. I apologize. I meant to say I used a terminal RCA connector.

[@FEPLabsRadio]

Beel! Good video, man. I use that same dingus on my setup. The difference I have is that the tuner and radio are tied to a PSU on a smart switch. I turn on the PSU first, then the radio thru Alexa. Reverse the process for shut down. Basically, I just cut out one piece of hardware from your setup, for better or worse.
My next thing is finding an appropriate 240VAC smart switch to cycle the PGXL on/off.
Thanks for the video, keep the shiny side up!

[@Bill-HRT]

Jeem! Thanks for stopping by and jumping in the comments. I definitely appreciate the support. I’m glad your setup is working for you. Alexa is smarter than me so I haven’t gone there yet. Luckily (or not) for me I don’t have 220v to contend with. Let me know where you land with that switch. Let me know if you know of any inverter that’ll handle that amp properly on 220/230v. I only have 120v at this point. See you next time. 73 de Bill