they make you feel guilty for the planet, yet they build stuff and force you to throw it in the trash while you can easy replace or repair some pieces in it.We rly live in a world of sht
The most barbaric way to disassemble the shaver, almost at the level of smashing it with a hammer. Please, follow his method on your own risk, what a disaster!
İyi günler kolay gelsin, bir sorum olacak braun mgk5515 makina var. pilleri NIMH 1.2v 1708 var. Ben duracell aaa hr03 1.2v 950 mah taktım çalışmıyor. Neden olabilir ?
That's what I thought. Surely wrapping the batteries with tape around the board will keep them in place and bending the connectors so it fits snuggly against the battery terminals?
You have destroyed the strips and very crude way to open the cell box. Removing cells should be in this way, you should have stripped out two pins connecting near the charger pins then take out the whole board for cells replacement. Instead this you have agreesivel y using nose plier to remove strips of cells on pcb.
i have to resoldering again so no problem how remove i fixed and working untill now perfectly. its take too much time 😜. make videos same time do work perfectly not possible its easy to comment but when you on my seat them you get idea ...but i appreciate your idea
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Appreciate your video showing all the challenges. Really helps seeing difficulties!
Thanks for the video. I refuse to buy another trimmer just for the battery.
they make you feel guilty for the planet, yet they build stuff and force you to throw it in the trash while you can easy replace or repair some pieces in it.We rly live in a world of sht
Thanks for the video, man. Very useful. I was thinking to use tape instead soldering, I will try. Thanks a lot
thanks bro i watched this to fix my braun 5517 shaver with aaa batteries
This video is very helpful, thanks for sharing 👍
Good information 👍
Thanks. Useful video.
Thank you very much sir❤
Your my hero
hi there, can i replace AAA 1,2 650 mAh with 2500 mAh ? thanks
❤
thanks for the video. brother i have same one ❤ ill save money 💰 ....
Can you said me it's modle please Or which series of model
i would desolder the batteries with nickel sheets from bottom of the pcb.this is a short and safe way
The most barbaric way to disassemble the shaver, almost at the level of smashing it with a hammer. Please, follow his method on your own risk, what a disaster!
Irmão, manda foto do carregador original, por favor. Pra eu ver as especificações 👍🏻
I thought those shaver using a lithium ion batteries?
Is this Braun 8 in 1
What a vision of It
İyi günler kolay gelsin, bir sorum olacak braun mgk5515 makina var. pilleri NIMH 1.2v 1708 var. Ben duracell aaa hr03 1.2v 950 mah taktım çalışmıyor. Neden olabilir ?
should be rechargable
@@testcompare evet şarjlı ama olmadı .enerji geliyor ışık yanıyor ama çalışmıyor.
I did it and really follow your step. But when I charge it for 2 hours...it keeps red blinking. Any suggestions..?
@@elyazharradjaloa4338 replace battery. try another one, different mah
I’m sure there’s a way without soldering
Yeah, the best way would be welding, but soldering is good too, as long as you don't overheat battery.
I just use insulating tape for secure batteries and everything is ok 👌
I think Ive heard of a conductive glue but I dont remember the details
That's what I thought. Surely wrapping the batteries with tape around the board will keep them in place and bending the connectors so it fits snuggly against the battery terminals?
Makineyi pilini iptal ediğ kablolu kullanılma şansımız var mı
👍👍💖👍
I have same trimmer. But battery same problem
Friend, how are you going to kill these batteries? They don't kill themselves, they're just ordinary batteries.
Wath to model 5516??
That’s why I’m never buying braun again
DONT USE THESE BATTERIES only replace with correct tagged rechargeable batteries!!
Hello sir
BUTCHER :D
You have destroyed the strips and very crude way to open the cell box. Removing cells should be in this way, you should have stripped out two pins connecting near the charger pins then take out the whole board for cells replacement. Instead this you have agreesivel y using nose plier to remove strips of cells on pcb.
i have to resoldering again so no problem how remove i fixed and working untill now perfectly. its take too much time 😜. make videos same time do work perfectly not possible its easy to comment but when you on my seat them you get idea ...but i appreciate your idea
to je patla...
How are you going to charge a non chargeable battery?
See in video. I already done 👍 and using again successfuly
The green pack Energizers are rechargable.
Použil jsem nabíjecí baterie AAA s IKEA a vše šlape. Moje metoda byla pájení ❤