Это видео недоступно.
Сожалеем об этом.
DIY Epoxy Dining Table-How to Woodworking-Part One of Two
HTML-код
- Опубликовано: 17 окт 2018
- How to video showing how I made an epoxy and black walnut dining table in my garage. Every step from picking out the slab, all the way to how I take professional photos in my garage.
Want to build your own epoxy table? Check out my epoxy table virtual workshop: workshops.blac...
Article I wrote on how to finish a table yourself instead:
www.blacktails...
Links to items used in this build:
Festool sander: amzn.to/2xTvIqh
Festool Vac: amzn.to/2LTiylj
A Better Epoxy: amzn.to/3u65D1R
Wood for this table: gobywalnut.com
Epoxy dye: amzn.to/30vi8FM
TS55 Track Saw (smaller): amzn.to/3bFpDBQ
Threaded inserts: amzn.to/311LdZd
Photography backdrop holder: amzn.to/2AWUS8L
Paper backdrop: amzn.to/2M2cvKH
Osmo 1101: amzn.to/35hJmmh
Osmo 3043: amzn.to/2MrrFbs
Gem Orbital: amzn.to/30WXvly
White buffing pad: amzn.to/310F0Nb
Track Saw: amzn.to/2VqUSaA
Mold release: amzn.to/35o5n2K
Wire Wheel: amzn.to/326FDpK
Caulk: amzn.to/35o5BH8
Melamine (form material): www.homedepot....
Dewalt track clamp: amzn.to/2AX4TTB
blacktailstudi...
/ blacktailstudio
/ blacktailstudio
The first half of the ruclips.net/user/postUgkx3ICSK6nSknaL_45CU2NmFSoXjarGMDiJ book is everything about wood: types, tools, finishes, setting up shop etc. The second half is all about doing projects for inside and outside of the home. The color pictures are helpful. After reading a dozen of these types of books, this is probably the best overall (layout, color photos, plans). Only detraction is that many of the projects use a table saw/router/planer, which are usually expensive and take up space, so the plans are less friendly to newcomers and the budget conscious. But I know I can use a drill, circular saw or a jigsaw to make the projects.
This was perfect as a vanity desk for me. ruclips.net/user/postUgkxMAlHv7-BBWMrPRm5-uEoD6rtdT7SG2Qr Especially the glossy finish. Easy to cleanI was looking for something that wasn't the traditional white and with more of a modern feel. This fit the bill beautifully. I put it together with no problems, by myself in under an hour.Make sure you double check where you place the drawer tracks before screwing down. I had one track that needed to be aligned with different holes than the rest.
I know that this is an old video but I just wanted to say Mr Cam, it has been such a crazy pleasure watching you grow and learn, and make mistakes and corrections, and work hard to achieve what you do. You are only as good as the last job you did! And that mentality you have is very rare! It has been awesome watching not only your skills grow and progress, but watching you grow your channel more and more! You are someone I would sit down and have a beer with, or go to car shows with and invite over for dinner good company kinda dude! I hope you take atleast a tiny bit of joy in reading this message !
I own a construction company, but my true drive and passion has always been wood working. Slowly built my inventory of commercial tools and equipment that collect dust more than make it, because I’m usually making free projects in my spare time for fun. Well.. I just bought a $4,000 black walnut slab. It’s your fault. Kidding, but you offer incredible advice and insight. And they way you demonstrate mistakes genuinely helps in all processes of anyone like myself who’s a perfectionist. 90% of my projects never end up following my initial plan or idea. So I got to the point where I just jump head first into it, with zero aim or goal at the end, until it’s finished. And it really generates really cool stuff! Turns on the creativity when you really f-up. 😅
"I always give myself a couple extra inches" and here I was thinking every guy did that
Watching your newer videos first, it's amazing how much you've improved over the years! You are so much more confident in the voice-over and your technique has gotten so much better.
I really admire all these people who have the time, tools, skill, and creativity to make amazing stuff! kudos to all of you! To watch you create things like this is really emotionally rewarding as it is inspirational!
My hat's off to you for a superb job of design and execution. As an 82 year old I was trained on hand tools and can appreciate your skill with them.
Wow, thanks so much. I have a long ways to go with hand tools though.
Who would possibly vote this down. The guy is a creative perfectionist !
This stuff is interesting ! I’m busy mom I’ve never made anything like this but these are so calming to watch and beautiful ✅ love to watch these in my down time
Don't be afraid. Start something small.
mkironman55 I am thinking about it ! Maybe coasters or something
Xdrii oh thanks! Happy to entertain 😊
oh for a second there i thought you referred to this guy as your mom, not you being a mother
because i watch your videos i realized what my dream job is and i hope i can achieve my goal
Dont know why but this video helps calm my anxiety a lot...i keep coming back here everytime it gets too hard for me to relax or sleep...much love.
Cheers 😊
"(the clients) occasionally have some good ideas." Ha! I agree the extra piece to square it up is perfect for this table. You get sort of combined appearance of both raw slab and square edges that way. Looks fab.
"The clients, occasionally have good ideas" lol. Keyword, occasionally. Love it
SOOOO SOOOO Thankful for you for producing such high quality how to's! Have so many notes from you, that I can one day put into action on a dining table myself! CHEERS!
Cheers Sarah!
I was paying way to much attention to the process, I didn't even notice the flip flops until reading the comments. Love your narration too, it helps fill in the visual gaps of the process. Beautiful work.
Flip flops are integral to summer woodwork. And thanks!
I'll be adding this to my list of things I want to do but I'm too busy to do. Great table!
"I always give myself a couple extra inches" That's What She SAID!!!! sorry, had to bring jokes to comments. Amazing video! Thank you for all the good info. I am an amateur builder and just started getting into live edge. keep the videos coming, I need all the help I can get.
Don't forget he also likes "nice hard wood"🤭😅
just wanted to thank you. i made my very own epoxy table thanks to your videos
Thanks!
I've worked with wood before. There is plenty of opportunity to mess up a job like this. NICE WORK! I love the wood and black epoxy contrast.
Another great & well explained video. The quality of your videos are superb 👌💯 ...and the tutorial/narration aspect of them makes it one of my favorite best explained RUclips videos. With all that said the finish product is a work of art that is truly amazing 💕 can't wait to see you part 2
You can get mounts for the fans so they hang from the ceiling. Kind of looks like root arms, very configurable, and can be moved completely out of your way.
It can save you a lot of money on woodwork project if you have the in depth woodwork system. I have written all of my experience & expensive mistakes I've made in my very first days on wood working. You should discover more about it: *TopFineWoodworking. Com*
Has to be my favorite one to date!
I've been subscribed to your channel for quite some time, and tonight I came across this video... While your production guality has gone up substantially in the newer videos, this older one goes to show that you have maintained a very high level of value in the way you show tool/product usage, as well as how you explain the what and why behind things you did to achieve a beautiful piece. Keep up the great work!
Simple but very beautiful desk! Thanks for sharing!
Simple? GTFOH
Great job man. Tons of helpful tips. Cheers!
The Naked Carpenter oh thanks buddy!
@@BlacktailStudio Hiya, just wondering if any other sealers, such as varnish or polyeurathane would work for the sealing step in which u used shelac?
I enjoyed watching and learning from your video. I'm newer to the woodworking scene, making more "rustic" style desks and tables, so videos like yours are very helpful in learning new tips, tricks and overall methodology for wood craft. I'm a whiles away from what you're doing, but excited to get there i ... eventually. Thanks. - Timothy
Good luck!
Always fun to find another portland woodworker on youtube
Workin in sandals, you know youve made it when. Hah. Makes me want to do this for a project and I dont work with wood. Cheers.
This look has really jumped the shark for me. River tables or heavily epoxied tables will be the Velvet Paintings of the future.
That shim trick. is something so simple and seems silly, but damn what a good idea!!! Another great video man!!!
This was one of the first videos I came across when researching how to pour epoxy. It was very helpful. My first big pour didn’t go so well, but the last one I just did cane out great. Thanks for the info!
Awesome! Thanks for saying so!
Great project and a very beautiful result! Congratulations!
Like your approach with the Ecopoxy! What is the benefit of the 2:1 over the 1:1 Ecopoxy?
Tobi Goatsleg 1:1 stays soft. 2:1 gets super hard 👍🏼👍🏼
“Occasionally have some good ideas”😂
Hey, a broken clock is right twice a day
I did not plan to make use of this woodworking book, www.WoodPlanner. xyz
but its a huge collection of woodworking plans that I recommend. . . .
I love your safety procedures while moving heavy wood slabs.
I’m a cautionary tale. I do it so nobody else will.
sandals are for the beach
Ron Brown sandals are great on a beach.
This is the prettiest table I've ever seen
Awe shucks 😊
I want that "Scandal" tv show, conference room table!!!!
LoL - that is a nice table, but it's made from boards. Wish I had it too, but would take up half my apt. Livingroom.
"If I had more friends..." ouch that hit hard lol
h1d3n1npl8in friends are overrated
Who needs friends when you have tools!
55vcarlos all
Boring
I just talk to my tools they don't talk back they just bite if your not. Arefull
You're quite the talented craftsman
Oh, thanks for saying so!
I find you guys using epoxy and creating things endlessly fascinating!
I try!
I heard you can use WD40 as a mould release.
Looks a lovely job 👍👍👍
"You did a really great job!"
*Smacks roof of horse*
I have no idea how I stumbled across this video, but I'm riveted. I've always dreamed of doing fine carpentry, and this is a take on it I never knew existed. Kudos!
+george george one negative comment ok.... 4 negative comments, jealousy
george george I guess you told me private major
george george maybe plaster the RUclips with some of ur crap and then let the judging begin ?
It seems to me u are jealous and feel the need to brag about yourself....... Possibly because no one else has ?
Very professional video. I do a lot of wood and metal working myself and I constantly find myself searching youtube to learn more things. By far one of the best educational videos I've watched. Get ready for your sub count to skyrocket!
Swampy Rooster thanks so much for saying so. Appreciate hearing that.
That's so clutch bro
This is a superb wood working book I`ve ever read, *TopFineWoodworking. Com* . Both novice and some skilled woodworker can gain a lot of general info using this reading material. I`ve been very amazed how frequently I use this to look up woods at places like to restore and salvage spots.?
Beautiful job and a great video. How much did the piece of walnut cost you?
BUMP
@@tristanrios2463 Boom!
Your voice is so calming! I really enjoy listening to you and watching the projects. This is going to be STUNNING!
really?
You are awesome Mate.
You should install a removable light-structured roller frame with a lock in mechanism on the back of your ute to prevent the slab falling of when yoy are driving.
Also, you should make the workbench height-adjustable using only one carjack.
Good call!
I'm curious about the bonding strength of the epoxy. I noticed that you didn't reinforce the wooden pieces together with either steel rods or wooden support pieces. There is a lot of weight in the wooden pieces and I was wondering if there is a possibility of separation of the wood and epoxy?
That's what I was thinking, I thought he could have drilled into the sides and installed some threaded rods into each piece to give the epoxy some longer bits to grab around.
Don't forget epoxy is a glue, it works through micro bonding deep into the pores of the wood, as well as a a keying effect where it takes perfect hold of the odd shapes its near, this ecopoxy is meant for tables like this, but I'm speaking to epoxies in general, and they are basically the strongest glue you can buy. So there is absolutely no need to reinforce for the strength of the bond. However some reinforce under the table with inlay ed steel beams help stabilize the slabs from twisting, but if the wood is at equilibrium moisture content of its final destination this will never be a problem. However, many aren't cautious or patient enough to wait until wood is at its perfect equilibrium moisture content.
@@droost Thank you.
He did make a point of removing the soft rotten edges. I suppose if you'd want to keep the rot to add a dimension, THEN you'd need reinforcements.
@@billybobjoe198 you need to watch part 2 it makes it obvious
ruclips.net/video/lmjZNTXve7I/видео.html
Awesome job. Goby is the place to go for slabs. #pdx
I love those steel toe sandals 😂😂
Beautiful table.
Great work
Thanks pat!
The ability to run such a huge project is great.
That is clutch
How much does a slab like that cost?
Oh man I love your tools and your whole set-up in your shop, I'm very inspired right now
Nice!
What a magnificent piece of timber.
3:24 "I always give myself a couple extra inches", dont we all
man i would love to do this, i live in new zealand and it costs so much to get american and canadian wood imported, new zealand has no good trees
I did not plan to make use of this woodworking book, www.WoodPlanner. xyz
It really does work.
I’m from nz as well. We have good hardwoods for other things but for epoxy tables they are a bit bland
Been loving your videos man. I’m contemplating making myself a smaller epoxy dining table. I’ve been binging your videos. Love them. Just thought it was funny because when I was googling epoxy tables for inspiration I saved one on my phone and it’s THIS one that’s in your thumbnail haha. What a small world
Ha!
When life hit on me and I feel down, I will watch this video to feel good again.
Wow, that’s cool to hear
Prices would be nice? What would it cost for just materials? I want to make one for when I do my kitchen remodel.
Vince Renteria thanks for the feedback. I’ll consider that for my next videos!
Just post prices in the description!! @@BlacktailStudio
He doesn't want to post the price because then you'll find out that the Live Edge wood slab cost over $4,000 alone......💲💲💲
@@jonathanhumphrey4143
Now that really depends. I bought a nice large Live Edge slab for a table that I built and I only paid $25 for the slab. Now it was not Walnut it was Hemlock but it was a gorgeous piece that I bought from my neighbors sawmill and I'm sure he gave me the neighborly price. The table turned out gorgeous . I did not use epoxy but many many coats of polyurethane . I'm not even sure how many coats that I used but when I say a lot I mean A LOT. Take care T
@@jonathanhumphrey4143 I checked out goby Walnut. Anywhere from $400 to $12,000...........
Had more friends. 😂 story of my life
Excellent work of craftsmanship! Also excellent video editing and tutorial. This shows why sometimes is better buy these work of arts instead of building them: the time involved, the expertise, the cost of materials and the tools needed is not something that is accessible to everybody.
Appreciate it!
dude ill help, just saw the needed employee caption, jack of all trades and love learning especially woodworking.
Thanks! I’ll keep ya in mind if I decide to do it!
"I need an employee"
Me: Is there a job opening? 😂
Would like to know the price of it ,looks so darn great.
.
slab alone would cost $500-$1000, epoxy is easy work, so table would maybe cost $1500-$2000
yeah I spoke to soon, this is not your average epoxy build. Taking it to a furniture maker to finish it, I'm gonna say this one would be $2-$5k
On his website it says it was sold for 11 grand
I’ve been told you can assume 250$ a square foot.
Wow this is truly CLUTCH. Lol. It’s been awesome
Watching these I feel I know nothing about epoxy projects and your helping me learn. Thank you 🤗👊🏻🙏
👊👊
Bro that's bad ass man I love watching this kinda videos to get ideas or to better an idea I already have
Anthony Mccauslin awesome, thanks!
You can put SOLD on the screen but can't put how much hua?
SuperWaffleSuperSyrup But the bigger question is how much would it sell for? I’m just starting out in this type of work but I don’t even have a ball park figure to sell for. Can you help?
@@DiHandley probably like 3000-4000 depending on quality demand and area. A highend apart in newyork might spend 500k on deco as crazy as that sounds
I'm from Texas and looking for a job I'm down to help you out I'm 22 just saw your video lol nice build
Iaa😷😷😷😷😷😷😷😷😷😷😷😷😷😶😶😷😷2×××¥÷£=€=€=£=£=¥=¥==¥=, ♤♡●♡□**/*&$f={
Thank you! I'm planning a live edge dining table for the house we're about to move into and this is oh so helpful. Thanks for sharing!
Oh thanks!
DIY is a bit of an overstatement tbh, that said great job
That’s fair
*Blacktail Studio:* "If I had a Bigger shop..."
Me: *:)*
*Blacktail Studio:* "or had more friends..."
Me: :(
Cool table. But really amazed you wear flip flops in a wood workshop....crazy.
God, what a gorgeous piece of wood.
I love this one! Im barely starting out with making a little bookshelf for my son.... hopefully I’ll get there one day! Lol
You can do it!
Hi I was just wondering how much does the table way when it's all done? It's so amazing.
Rough estimate ~800 lbs
I really enjoy plans from woodprix instructions.
Cool. I love that . These plans are just fantastic :)))
love the tip of the shims in the kerf for lining up cuts with the track saw!!!
Happy accident!
Man exceptional video , thank you so much for sharing your great knowledge on how to do these. I'm slowly talking myself into trying one.
Great video, nice table and love the hairstyle. If out here,I would love to help you
Awesome build ! just don’t use flip flops when working it’s dangerous
iri iri that’s what I keep hearing. I got 10 toes still, when I get to 8 I’ll make an adjustment. And thanks!
@@BlacktailStudio . I thought those were the NEW steel toe flip flops ?
sandals? and figuaring out how to get a piece a "wood" out of a shortbed truck. holy shit! careful if you come to Texas
jzaatx lived there for 4 years! First week I stood on a red ant hill in flip flops 😬 didn’t learn I guess.
Awesome video! Thank you for all the steps and process shots! Turned out amazing.
CReeves Makes thanks for saying so!
Lol this has a lot off fun using his tools. I am getting excited for him ..
How much did the wood cost?
I had the same question...
You can be sure it is a big bucket of bucks.
We sell slabs just like these shown here for 120$ on average at our mill out in Ava Missouri. Depends on the size of tables wanted. Our Walnut is 7$ pbf per board foot..cedar is 6$ per board foot. Sweet gum is 7$pbf,cherry 7$pbf and both red and white oak is 7$ per board ft.
@@angieridenour5523 does your company sell on the internet? looking for some wood on a guitar build
6:13 before he gets an employee, maybe he should get some shoes?
Do not insult others..!! Atleast he is doing his job..!! Not ever1 are rich..!!
He is atleast working to feed himself..rather than stealing or killing or begging.
What a gem of information! Thank you for this informative video!
This video is very therapeutic!
How much would a slab cost
A slab like what he got is close to $5k maybe more at the place he got the slab from. I guess if you can afford a $600-$900 festool saw you can afford a slab that cost $5k.
@@The__Canuck. WTH? 5K? So the tree costs over 50K? Don't think so...
i'll give you a good slap for only ... 10 bucks ! ;o)
@@fasousa4798 Yeah a walnut slab of that size and thickness is between $2,500-$8,000. www.keimlumber.com/walnutblack link for reference.
@Hank Chinaski It definitely is for that type of claro walnut of that length width and thickness. More likely more like $7,500.
"this wasn't even staged" "seems a bit too convienient" at timestamp 1:00 if you look close it has sold written on it and in the over head shot it has been wiped away
he probably recorded after he found it. either way who gives a shit
Your voice is so relaxing to listen to
Nice work, can't wait to try my own next summer, but way smaller.
Good luck!!
Bro, i'll come be your apprentice and help you lift stuff.
No me
He’s gonna lose his foot soon, he’ll need plenty of help
@@bearbriganti5203 his foot?
@@theterribleanimator1793 yes. He's wearing sandals
@@mrpapagiorgio5404 Oh, well there is aways prostetics.
Who works in a shop full of tools and potential hazards, with flip flops?
This guy 👍🏼👍🏼
I do
A real man
I live in california where theres tons of coastal redwoods, and on one of my father's old properties, it came with a massive cut of wood out of a 500+ year old redwood. The cut is about 3 inches thick and it spans roughly 7 feet at the smallest point, not including holes in the wood from rot. Hopefully i can use it to make a killer coffee table using the epoxy method
Oh man, that’s gonna be awesome
I don't have a question but damn sir. Your videos are so great. How you edit your videos and how you explain things is very good. Not to mention your woodworking skill is off chart. I'm not really into commenting things on what I see on youtube but yours is exceptional. Please continue making great videos. 👍
Thanks! I do it all on my iPhone
i took a big dump i clogged the toilet :-) it was incredible i couldn't believe it
What the fuck?
congrats
well congrats you have exceeded someones expectations
I’m proud
You kid are an ass! Please post a picture of yourself so you can be avoided in the future. Or just a disconnect from the internet to save yourself embarrassment.
Fantastic job mate, please sort your footwear out when you're in the workshop, flip flops...??? you've got to be joking...!!!
Allen O'Rourke worst part about winter is not getting to wear them! I got lots of toes. Can spare one or two.
I work barefoot in my shed in summer. I guess if I drop a chisel on one of my toes then I’ll be able to make up a cool story about how I lost a toe on a hunting trip.
Love your table mate. Looks awesome. Cheers from Australia 🇦🇺
The Ideas Guy Aussie’s are the best. Cheers mate!
@@TheIdeasGuy "A vicious wombat came, wanted my expensive tools... I said 'Not today you bloody wombat! Not this guy! Not these tools!' We had quite the tussle, little guy put up a hell of a fight! Bit clean through my work boot, took a few toes as compensation for his trouble and he ran off into the woods... I see the little bastard outside my shop now and again, he's got the taste for human flesh now! Better watch out.. the tools aren't the only reason we use eye protection around here! Cover your soft and tasty bits fellas.. or that bloodthirsty wombat will be back, and he might have friends."
"Woah.. Really?!"
"Nah, mate. I dropped a chisel on my foot while wearing sandals. You thought I fought a wombat? You thick fool.
Although... maybe the wombat made me say that, so you wont expect it. Maybe he's waiting under your car, under the driver side.. waiting for those tasty foot sausages to come close. When you least expect!"
"Wait.. so is there, or is there not and vicious bloodthirsty wombat around here?!"
"Wouldn't _you_ like to know. ;] mwahaha"
Vietnamese safety boots.
Cape Town, South Africa...love the video! Your channel got me started making these. If you ever visit SA, there's a couple of cold beers on me!
Cheers!
Thank you so much for your outstanding workmanship. You've really got my creative juices flowing.