I think it's just that he anticipated the possibility that bending the connector had broken circuits, which isn't unreasonable since that applies to so many of his repairs. All the same he worked through it.
this guy is good at what he does. he sells you the products he uses... so when you can't fix it.. you send it in to him and he shows you how it's done.
@@SAZodia They were yes 😞unfortunately they left the GPU market. Still hope one day they will work together with either AMD or Intel to make top tier GPU's again.
Is it only me or were the DisplayPorts also bend and needed to be replaced? And you don't have to test them just put a cable in it to check if it fits.
this fix involved major issue , minor issue major issue the gpu is working minor issue the display ports I never dealt with displayports so I don't know, there seem to be great uses for them, I heard they have a hub & you can display 3 monitors on a single line/port
Hey Alex. Put out more videos and don't worry about the editing so much. What you do for a living is driving for perfection married by what you do by way of RUclips. I am a new viewer and have subscribed and absolutely love the technical stuff but equally your dry sense of humor analogies sub Psychology by way of customers, you are a true Entertainer by weigh of what you do and who you are.
this is a brilliant example how NOT listening to the customer is sometimes a good thing. If you went by there word you would of replaced the connector and it still wouldnt have worked. They would never of guessed about the blown fuses. Also he could of took this to other places who possibly woudl just change it charged him and said well i did what you asked even though it didnt work when returned. well done sir
That was my personal card, I would have straightened out that port with a pair of strong tweezers, or small needle nose pliers. Didn't really look to awfully out of wack. I've straighten worse things out with success.
Anti-glare light ON , does that mean i can switch my RTX OFF ? 😎 You're saving tonnes of tech which otherwise would have landed on the e-waste pile! Green kudos for you! 😃
We can replace the fuse! Bravo! I learnt lesson early not to have electrical equipment switched on whilst plugging HDMI cables in & out. ALWAYS turn equipment off - don’t be lazy arses else you’ll pay! But you can now replace the fuse!
When fuses are at work they are always in emergency mode and always very delicate and simple vibration breaks the thin wire inside them that’s probably why they failed when there was nothing shorting it makes sense to me they failed when current is going through them and the bang on the ground broke the connection in them.
The shiniest thing I have ever seen after gold n silver is my daughter this time I have not agreed with you Alex. I learnt a laughter after a successful repair now I’m going to rehearse the yessssss when the job is done. Great job though
Awesome... At end of video successful job I feel happy for you... Its nice to see happiness on your face... Yes yes we done it.... Mostly on video card jobs... Love from India... Keep it up..
I wonder how much time you would save by having a simple app where you scan a QR code stuck to the donor board and it tells you how many of each component you have on that board, if you use something you just click to minus 1. But I guess it would either take time to count at the start or require the schematics for the donor boards to know what is on it.
Thanks for sharing your knowledge Alex! Could you please make more video's on the business side of things? I also have a computer repair business in the Netherlands, and I learn alot from your videos!
My 3080ti fans went super sonic then shutoff the whole pc an refuses to boot. Need to send it I'm since still under warranty. I hope it gets covered. I cannot afford a new card an its stressing me out. My luck.
Also, cap power. Capacitors can store a difference in potential and, because they are designed to release that charge all at once, caps can easily blow fuses if there's a temporary short.
Bet ya the customer complained about the extra charge cause Alex went beyound to make it work replacing the fuses too not having too. Saving the the customer to pay to ship it back to get the whole job done.
Correct me if I am wrong. 3090 was launched on September 2020. EVGA offers 3 years of warranty. Therefore, why not sending this with RMA to EVGA? 99% of the times, it would have been repaired for free. Unless there is water damage or evidence of burning, they always replace or repair for free. Don't you know your rights as a customer?
Advise against using shitty gigabyte doner cards for an EVGA ^_^ Gigabyte are well known for using cheap components. Love the vids BTW, excellent work.
This pcb sucked. I murdered 2. After blowing fuses I bridged them and put the 1000w bios. I’m going to hyperprostulate it’s the up9511 voltage controllers fault.
No you can not. You may be able to get a case and make it an external hard drive but you will not be able to get the speeds that it is capable of. The connections are far too old.
![Unboxing An EPIC Press Kit, Upcoming Videos & Launches - Start of 2025 Subscriber Video! [4K]](http://i.ytimg.com/vi/jut642KPGco/mqdefault.jpg)
The part where you're a little confused by the hdmi cable not going in made me laugh a little. That was literally the reason they sent in the card.
me too me too XD
I think it's just that he anticipated the possibility that bending the connector had broken circuits, which isn't unreasonable since that applies to so many of his repairs. All the same he worked through it.
arrogance make you dumb sometimes, thats what happened.
@@CharithaCn but it also helps, arrogance is a virtue of intelligent
the hdmi connector damage didn't look like a big deal....until it was...i hate it when i underestimate the power of a tenth of a millimeter....
this guy is good at what he does. he sells you the products he uses... so when you can't fix it.. you send it in to him and he shows you how it's done.
I can't believe it works that way, re the holding hands part. Neat.
A smart engineer designed a universal HDMI board layout. Huzzah to him.
Thanks for the video Alex.
That's EVGA for ya, they were always a step ahead of the competition when it came to GPUs.
@@SAZodia They were yes 😞unfortunately they left the GPU market. Still hope one day they will work together with either AMD or Intel to make top tier GPU's again.
@@SAZodia that's why EVGA is the best
@joaoofficial that would be nice, but I think their main focus now is motherboards and they have released some seriously good ones recently too.
@@maklogetrich2378 indeed they are
How do you know what amperage rating the replacement fuse is?
thank you for the flux tip. really great. thank you
Is it only me or were the DisplayPorts also bend and needed to be replaced?
And you don't have to test them just put a cable in it to check if it fits.
exactly my thoughts as well.
this fix involved major issue , minor issue
major issue the gpu is working
minor issue the display ports
I never dealt with displayports so I don't know, there seem to be great uses for them, I heard they have a hub & you can display 3 monitors on a single line/port
Also the customer could be using multiple displays with the card. As it stands only one HDMIU port appears to be functional.
it's only you
Yes I would be pissed if i sendt it in then got it back without the ports beeing changed
I need to get hot air tweezers,anti glare light and will have everything from Alex.Great job on the repair Alex.
really nice.
I thought this would turn out to be a no-fix, but i'm glad it's working.
Please bring back the end music..... It's so satisfying to listen.
I hope you changed the other ports as well. That's why he sent it in!
Love your patience and sense of humor...........
Hey Alex. Put out more videos and don't worry about the editing so much. What you do for a living is driving for perfection married by what you do by way of RUclips. I am a new viewer and have subscribed and absolutely love the technical stuff but equally your dry sense of humor analogies sub Psychology by way of customers, you are a true Entertainer by weigh of what you do and who you are.
I love the way you solder the leg of connector. ❤️
I always love watching a successful repair! Great job as always, sir. Well done.
this is a brilliant example how NOT listening to the customer is sometimes a good thing. If you went by there word you would of replaced the connector and it still wouldnt have worked. They would never of guessed about the blown fuses. Also he could of took this to other places who possibly woudl just change it charged him and said well i did what you asked even though it didnt work when returned. well done sir
That was my personal card, I would have straightened out that port with a pair of strong tweezers, or small needle nose pliers. Didn't really look to awfully out of wack. I've straighten worse things out with success.
I love how you show that experience beats best practice!
What I like most about this is learning what brands NOT to buy.
Anti-glare light ON , does that mean i can switch my RTX OFF ? 😎 You're saving tonnes of tech which otherwise would have landed on the e-waste pile! Green kudos for you! 😃
Way to go above and beyond!
another great vid,,,, mid morning here in the uk and excuse to watch and have a cuppa tea,,,,,,,,,,,,,,, thanks for taking the time to post
I want Alex saying "solid" to be my text message alert. 🤣 Nice work as usual.
Thanks for these videos. I love troubleshooting and fixing things myself.
We can replace the fuse! Bravo! I learnt lesson early not to have electrical equipment switched on whilst plugging HDMI cables in & out. ALWAYS turn equipment off - don’t be lazy arses else you’ll pay! But you can now replace the fuse!
Amazing Alex, you put us in the picture mate.
21:50 jajaj , relax , tranquilo. greetings from Argentina
When fuses are at work they are always in emergency mode and always very delicate and simple vibration breaks the thin wire inside them that’s probably why they failed when there was nothing shorting it makes sense to me they failed when current is going through them and the bang on the ground broke the connection in them.
Do those fuses have 'thin wire' inside them?
. . . There is usually an issue prompting client to yutz around with set . . .
You are a pro and sometimes even an artist....
Alex!!!!any thoughts about replacement fuse ratings...the markings were different....
Alex amazing diagnose in a few minutes and solved fast and clean !! my respect !!
Sometimes I think you are a disguised wizard - because all your work is magic! 🧙♂👍
A cheap shop would have bent that connector back in shape and forced the cable in it. You did a better than factory job, very impressive.
don't you need to check if you can fit a displaycable into those displayports? since the bend ports were the reason it was sent in?
I bet big boss tested that when reassembling.
The shiniest thing I have ever seen after gold n silver is my daughter this time I have not agreed with you Alex. I learnt a laughter after a successful repair now I’m going to rehearse the yessssss when the job is done. Great job though
Spread the love hold hands
Awesome...
At end of video successful job I feel happy for you...
Its nice to see happiness on your face...
Yes yes we done it.... Mostly on video card jobs...
Love from India...
Keep it up..
Und schon wieder einen tollen Job gemacht !
Why the music and business address was removed from the end of the video? That was kind of a signature of the channel
Nice work Alex , you amaze me with your patience ,working on these sometimes aggravating video cards ! one of the reasons I enjoy your channel!
Ofcourse TRANQUILO todo es posible 😎
Thank you please more vga repair. What about cod 38 no boot and 3 beeps
Thank for the content man ur videos have sparked an interest i didn't know I had will be ordering all I need to learn how to do the work you do
I wonder how much time you would save by having a simple app where you scan a QR code stuck to the donor board and it tells you how many of each component you have on that board, if you use something you just click to minus 1. But I guess it would either take time to count at the start or require the schematics for the donor boards to know what is on it.
Do fuses have a reference number showing, or do you have to measure to confirm the amps?
I think so. Theres a book with those tiny things . I wonder if there's a grab bag with bunch of them.
Good work Alex
Awesome, love watching your work, 👍
Thanks for sharing your knowledge Alex! Could you please make more video's on the business side of things? I also have a computer repair business in the Netherlands, and I learn alot from your videos!
Bala Frome india...your videos and your works all good.. thank you sir
Nice job 👍
A fuse is a fuse but are the values the same ?
is the customer using HDMI port or DisplayPort?
Cool technique replacing the fuse, I'm damn sure the same would work doing the same on LED lighting boards.
You are a Master 👌🏼
My 3080ti fans went super sonic then shutoff the whole pc an refuses to boot. Need to send it I'm since still under warranty. I hope it gets covered. I cannot afford a new card an its stressing me out. My luck.
still amazing after all gpu card repair videos ive seen. i hope my cards only has fuse problem.
did linus send it to you?
What happened to your outro music at the end of the video?
I love the long videos 💪
how can a fuse blow when the card isn't in the pc and has no power ? I mean it wasn't physically damaged itself
Shock? ..I don't know, just guessing
Also, cap power. Capacitors can store a difference in potential and, because they are designed to release that charge all at once, caps can easily blow fuses if there's a temporary short.
Static electricity
I still don't get why the fuses blew. It was not plugged in when it got dropped or was it?
would you recomend to buy that video card in these days?? i have a great offer to buy one just like it
Hi Alex do You know where can i get the boardview or squematics for grafic cards?
Art 👌💛
You could have used a DP to HDMI convertor instead of replacing the HDMI connector
Hello good Job! Regards from Germany 🇩🇪
this surely got shocked or something. the owner might not be telling the whole truth...
Should be 3 power plugs I see only 2?
Bet ya the customer complained about the extra charge cause Alex went beyound to make it work replacing the fuses too not having too. Saving the the customer to pay to ship it back to get the whole job done.
He was paid to fix the card. He has said many times he gets paid the same no matter how long it takes.
Does the HDMI connector determine or play a role in the HDMI version?
happy ! thx ya zalami
How are you sure that it was a 10 amp fuse ? Thanks !
Came in for repair.
Correct me if I am wrong.
3090 was launched on September 2020.
EVGA offers 3 years of warranty. Therefore, why not sending this with RMA to EVGA? 99% of the times, it would have been repaired for free. Unless there is water damage or evidence of burning, they always replace or repair for free.
Don't you know your rights as a customer?
any doubt the ports when plugged in causes a short ?
Good thing about Cali is your containership gets there first 😂😂
How does one obtain a donor card?
Dude where do we get schematics for video cards?
Legend.
If i lived in LA i would love to work in your shop i can learn a lot more than i already know
You are my inspiration 🥰🥰🥰
🥰🥰🥰 Dear
do you sell the soldering tweezers? i couldnt find them on the site??
Awesome repair
👍👍😘😘
Seems like now we have fuse blown season on 🤫
for gpu's you sholud use an heat bed.
Awesome ✌🏻✌🏻✌🏻
Advise against using shitty gigabyte doner cards for an EVGA ^_^ Gigabyte are well known for using cheap components. Love the vids BTW, excellent work.
you forgot the googels
U spread the flux then the love
This pcb sucked. I murdered 2. After blowing fuses I bridged them and put the 1000w bios.
I’m going to hyperprostulate it’s the up9511 voltage controllers fault.
Is worth it these days to buy a used rtx 3090 24 gb ?
I have a nvme ssd. Can I upgrade hp probook 6470b with it? Are there enclosure adapters that can do this job?
No you can not. You may be able to get a case and make it an external hard drive but you will not be able to get the speeds that it is capable of. The connections are far too old.
Just a tiny bit of hot air goes a long way :D
Sorry, but what do you mean by "the power cable got snatched"? Do you mean "snagged"? Thanks
No I mean snatched and not snagged. dictionary.cambridge.org/us/dictionary/english/snatched
@@NorthridgeFix So you meant it was pulled out or pushed in very roughly or with little care. Thank you for clarifying.
Simply buy DP to HDMI cable...
Better than factory. wow.
in my opinion the customer overclocked the graphic card and burned it
There are DP -> HDMI adapters.