This is awesome. A GUI would be a great next step. Most FPV builders are happy to solder, but have issues programming to the level thats shown here (although I'll probably have a go anyway). Keep up the good work! You have a new subscriber here!
Exactly! The programming part will push a lot of folks away. It’s not that some can’t do it it’s a time thing and or some people have no patience like myself at my age with this tech stuff. I used to love doing all this programming stuff but not anymore. I already have DJI V2 system and Walksnail but I’d probably dump all that if OpenIPC gets a GUI going that makes setting up much easier.
What a work, man you should be proud and make a ready to use system or a DIY KIT with pcb and components to solder with all step documented for programming and running (i suck at programming except VBA ^^ but i'm good at solder like a lot of people. 100% i will buy it and i'm sure i am not alone ! We need an open source affordable HD FPV system ! i have trusted HDZero for that and i had been disappointed a lot with their new product and pricing. So i sell all and came back to analog You give me hope for HD FPV for everybody
please tell me, I can't find information anywhere about how to watch the rtsp stream from the nvr module via ethernet connection? Attempts to find the video stream at nvr failed.
Looks great! Do you think the NVR can work with smaller HDMI displays designed for the Raspberry Pi? If so, it would be possible to make some box goggles using it
WOW, thank you Mario! Please tell me, after installing all this, what steps are needed every time in the field to actually start flying (assuming I am using googles with HDMI input and 12V BEC to power the VRX?)? How much time does it take to establish connections/passwords/frequencies every time from scratch?
Hi Mario, thanks for your work! i've buy same nvr, do the same and successful install openIPC on it...by ssh all works great but i no have HDMI output...have u some solution for it? ty
Yes, after you successfully flash the NVR you need to ssh in the NVR with the command “ssh root@NVR_IP” (password 12345) and then type “sysupgrade -k -r -n”. Cheers mate!😊🍻
So Mario! If I'm understanding this correctly, for the aerial unit you need a compatible camera (let's say GK7205V300 + IMX335) with a wifi module... And for the station a board like this one you are showing with a wifi module... Or am I missing something here?
Hi Mario, Great works! I saw also your 3D Printed VRX customize for this board; I have question: If you are using an Nvidia Jetson Nano or Orin-like compute board instead of a Chinese H264 NVR board, do you think the latency will decrease?
Thank you so much for the support! We are working hard to be ready for this March when the first batch will be ready. We believe we have fixed the PA issue. Cheers mate!😊🍻🙏
Dear MarioFPV, should i use Venc or Majestic on that NVR ? on the Camera side (using openIPC), should i use majestic or Vdec ? where can i find the drone.key and gs.key ?
You can use majestic or venc on the gk7205 cameras. On the ssc338q your only option is majestic. On the NVR your only option is vdec. To generate your private encrypted keys, run wfb_keygen on the NVR. Then copy the gs.key in /etc folder of the NVR and the drone.key in /etc folder of the camera. Cheers mate!😊🍻
Not yet. I’m waiting for the new camera that has 720p@120fps mode. Some preliminary tests made by the developers showed 30ms glass to glass. They were also able to have 1080p@90fps mode which is insane! Cheers mate!😊🍻
Hey Mario! Awesome work! I've already flashed a 7205v210 with openipc venc . Which image can we use for this nvr board ? Ive bought one , it should arrive this week. Also , if there's no venc/vdec type fw , its enough if i compile it , and then copy over to the nvr (after successful openipc fw install)?
Wow this is crazy, I might put this in a flying wing, it looks amazing. Correct me if I'm wrong, you have this WiFi USB stick in that "VRX" one of the 2 USB ports, and an IP camera with another USB WiFi stick and firmware flash and "done"?
You have the VRX and one WiFi stick plugged on one of the USB port and an IP camera with another WiFi stick. 1x VRX, 1x IP camera and 2x WiFi sticks. The VRX will have to be connected to goggles or an HDMI monitor. Cheers mate!😊🍻
Mario, I am not familiar with the constraints involved so pardon my ignorance. Could there be some work around? Perhaps a custom PCB that creates its own IP address that could be used between the camera and transmitter? The work you're doing is 10/10 but the biggest hang up for me is the cameras. The FPV cameras available on the market are fantastic because of their form factor and quality... your thoughts? @mariofpv
Wait for my next video because I have a surprise for all! New hardware that can fit in a 3” or 2” micro quadcopter. Subscribe to now miss it. Cheers mate!😊🍻
Can i run it on mobile phone? It woupd be game changer if you can run it on phone and conect phone to goggles. But on laptop its top too, you can connect googles to it.
They chose to be competitors and spread bullshits for our project. We have already teamed up with Ruby FPV and EZ-Wifibroadcast. Sadly for the OpenHD devs, they have isolated themselves while trying to promote with lies their firmware. OpenIPC is going to the top as you can clearly see. Cheers mate!😊🍻
@@mariofpv that's a damn shame they did that. well, at least thereMIGHT be some competetion or at least people to keep you guys up to beat! keep that drive going!
But if both systems are free why should there be ANY competition? Makes no sense. They just wanted to create drama with the other open source fpv communities. They had bad strategy and they are now paying for that.🤷♂️
@@mariofpv competion as in: who develops it better/faster. Money isn't the issue (while I suspect OpenHD devs are afraid of someone stealing their desing/tech and make a profit, so they will not work togheter )
@FATSNAIL-FPV no one can steal something that is already open source. You just download the code mate. If they think that anyone cares about their code they are delusional. In fact they are using the WFB-ng source code for their link(modified version), so we have nothing to steal from them. We are also using WFB-ng in OpenIPC.😊
Yes it works. Make sure you don’t type l(small L) instead of I(capital i). These are very basic skills that someone should have before proceeding with downloading and installing the software. Otherwise please wait for the plug and play OpenIPC hardware that the developers will start selling soon. Cheers!😊🍻
Ok, I can just never find putty, windows search is 10/10 dog shit😂. Oh you want to search bing to shop for putty, because of course you don't want to run putty.exe
Mario, you're doing incredible work don't stop!
Cheers mate! 😊🍻
This is awesome. A GUI would be a great next step. Most FPV builders are happy to solder, but have issues programming to the level thats shown here (although I'll probably have a go anyway).
Keep up the good work! You have a new subscriber here!
That’s a great idea. I’m on it. Thank you for the subscribe. You make me keep on going!🎉 Cheers mate!😊🍻
Exactly! The programming part will push a lot of folks away. It’s not that some can’t do it it’s a time thing and or some people have no patience like myself at my age with this tech stuff. I used to love doing all this programming stuff but not anymore. I already have DJI V2 system and Walksnail but I’d probably dump all that if OpenIPC gets a GUI going that makes setting up much easier.
I love looking around for a solution and stumbling on an active project like this. Keep up the good work!
New video coming soon. Stay tuned. Cheers mate! 😊🍻
Dude! This is gettin better n better...= gooooooood times man .....thinkin you just might be out front of somthin super cool here
That’s the beauty of open source! It’s always better than any other option. Cheers mate!😊🍻
This is awesome. This is the part where I've been confused the longest. Thanks man, good work. I'm gonna buy the parts this week.
The system is still under heavy development. It works but we are improving it constantly! Cheers mate!😊🍻
Wow, You are the One youtuber for this, kepp making this series.
Stay tuned new video coming out in 2 days! Cheers mate!😊🍻
What a work, man you should be proud and make a ready to use system or a DIY KIT with pcb and components to solder with all step documented for programming and running (i suck at programming except VBA ^^ but i'm good at solder like a lot of people.
100% i will buy it and i'm sure i am not alone !
We need an open source affordable HD FPV system ! i have trusted HDZero for that and i had been disappointed a lot with their new product and pricing. So i sell all and came back to analog
You give me hope for HD FPV for everybody
Something really exciting is coming soon. Cheers mate!😊🍻
Great job Mario!! Getting more excited on this project
Cheers mate!😊🍻
please tell me, I can't find information anywhere about how to watch the rtsp stream from the nvr module via ethernet connection? Attempts to find the video stream at nvr failed.
AirUnit + Ground Station, Excellet job! Wait to see your 720P@120FPS and 1080P@90FPS quality and latency!
Coming soon. I have already started the video tutorials as you can see. Cheers mate!😊🍻
That's great! AirUnit + Ground Station, Maybe we can make some products based on this.@@mariofpv
great progress and lot of effort to get things achieved.
Chapeau - hats off !
Cheers mate!😊🍻
Excellent Mario, I am loving it !
Looks great! Do you think the NVR can work with smaller HDMI displays designed for the Raspberry Pi? If so, it would be possible to make some box goggles using it
Yes it works and I have already tested it. You can create box goggles if you want. Cheers mate!😊🍻
@@mariofpv Thanks for the quick reply! Which display have you tested it with?
WOW, thank you Mario! Please tell me, after installing all this, what steps are needed every time in the field to actually start flying (assuming I am using googles with HDMI input and 12V BEC to power the VRX?)? How much time does it take to establish connections/passwords/frequencies every time from scratch?
This is a work in progress so more features will be added in the future releases. Cheers mate!😊🍻
Hi Mario, thanks for your work! i've buy same nvr, do the same and successful install openIPC on it...by ssh all works great but i no have HDMI output...have u some solution for it? ty
Yes, after you successfully flash the NVR you need to ssh in the NVR with the command “ssh root@NVR_IP” (password 12345) and then type “sysupgrade -k -r -n”. Cheers mate!😊🍻
Sorry, i'm stupid, not start vdec =P
It should start automatically. Please do sysupgrade to get the latest fixes. We add features or fix errors daily!😊
Qrazy how things evolve. Keep it up!
Cheers mate!😊🍻
15:10 Loved it !
Cheers mate!😊🍻
So Mario!
If I'm understanding this correctly, for the aerial unit you need a compatible camera (let's say GK7205V300 + IMX335) with a wifi module... And for the station a board like this one you are showing with a wifi module...
Or am I missing something here?
You are correct
Correct! Cheers mate!😊🍻
Great work❤. Now its lot more affordable 🎉
Cheers mate!😊🍻
Amazing work.
Cheers mate!😊🍻
i had no idea there´s a OpenSource firmware for this NVR 😮
Welcome to our community. Cheers mate!😊🍻
Hi Mario,
Great works! I saw also your 3D Printed VRX customize for this board; I have question:
If you are using an Nvidia Jetson Nano or Orin-like compute board instead of a Chinese H264 NVR board, do you think the latency will decrease?
Yes but we don’t recommend them as they are much more expensive. One of our principles is to keep the cost as low as possible. Cheers mate!🍻
Hoping to use this to make a range target camera!
Good luck with your project. Let me know if you need any support. Cheers mate!😊🍻
Just joined! Can’t wait!!
Thank you so much for the support! We are working hard to be ready for this March when the first batch will be ready. We believe we have fixed the PA issue. Cheers mate!😊🍻🙏
Dear MarioFPV, should i use Venc or Majestic on that NVR ? on the Camera side (using openIPC), should i use majestic or Vdec ? where can i find the drone.key and gs.key ?
You can use majestic or venc on the gk7205 cameras.
On the ssc338q your only option is majestic.
On the NVR your only option is vdec.
To generate your private encrypted keys, run wfb_keygen on the NVR. Then copy the gs.key in /etc folder of the NVR and the drone.key in /etc folder of the camera. Cheers mate!😊🍻
cool! thanks
Cheers mate!😊🍻
Amazing work. Simply space. This VRX with VDEc can only send to HDMI or to groundControl can also send UPD?
It can send to both. Cheers mate!😊🍻
@@mariofpv hdmi works for me, but how do I register udp_addr in vdec.conf?
@@mariofpv with majestic?
Yes
@@mariofpv both? Vdec+majestic one time?
Have you measured the end to end latency? How it's like?
Not yet. I’m waiting for the new camera that has 720p@120fps mode. Some preliminary tests made by the developers showed 30ms glass to glass. They were also able to have 1080p@90fps mode which is insane! Cheers mate!😊🍻
@@mariofpvwhat camera u order now?
New Cam?
@@mariofpv60ms glass to glass
Join the telegram group to see photos. Cheers!😊🍻
Hey Mario!
Awesome work!
I've already flashed a 7205v210 with openipc venc .
Which image can we use for this nvr board ? Ive bought one , it should arrive this week.
Also , if there's no venc/vdec type fw , its enough if i compile it , and then copy over to the nvr (after successful openipc fw install)?
Please use my video tutorial to setup your NVR. You will need to sysupgrade after the initial installation. Cheers mate!😊🍻
@@mariofpv
Okay, will do , but which uboot did you flash with Hitool ?
The one that is included in the image I originally posted. Just make sure you sysupgrade after you flash it.
@@mariofpv
Sorry, maybe my bad, but i dont find the image . Ive tried copy the link you mention in the video , but its not downloadable anymore...
@istvanbotzheim6171 make sure you typed it correctly. We have discussed it in previous comments.
What's the best hardware for balance between cost and performance?
Would like to build one to test
Wait for the OpenIPC Mario cam and buy Radxa Zero 3w 1GB no eMMC. Cheers mate!😊🍻
OpenIPC Mario cam + Radxa Zero 3w. Cheers mate!😊🍻
dude this is awesome
Cheers mate!😊🍻
This looks exciting! Does this transmit over 5.8Ghz or 2.4Ghz? Cheers!
Both! You can set it in the settings. Cheers mate!😊🍻
Is it possible to set, split screen function for vr goggles ?
Sorry but this function is not possible in the NVR.
Where can I buy this, I would love to do some messing around with one.
Please have a look in the video description. Cheers mate!😊🍻
Is there link to the zip file?
Wow this is crazy, I might put this in a flying wing, it looks amazing. Correct me if I'm wrong, you have this WiFi USB stick in that "VRX" one of the 2 USB ports, and an IP camera with another USB WiFi stick and firmware flash and "done"?
You have the VRX and one WiFi stick plugged on one of the USB port and an IP camera with another WiFi stick.
1x VRX, 1x IP camera and 2x WiFi sticks.
The VRX will have to be connected to goggles or an HDMI monitor.
Cheers mate!😊🍻
@@mariofpv damn, Amazing content + extremly fast answer, who can do better ?
Might order a set pretty soon then
Wow, really awesome !
Thank you for the support my friend! 🙏
Can we use this device for WFB-NG?
The OpenIPC already has WFB-ng by default. Cheers mate!😊🍻
Mario I didn't find the zip file you mention in the video. Can you please add link?
Please watch the video to see the link. Cheers mate!😊🍻
Could you share google drive link to download openipc fw?
Please watch the video to see the Google drive link. Cheers mate!😊🍻
link to google drive from video not working
I have removed it. Please use the official OpenIPC image from the GitHub. Thank you.
Mario, I am not familiar with the constraints involved so pardon my ignorance. Could there be some work around? Perhaps a custom PCB that creates its own IP address that could be used between the camera and transmitter? The work you're doing is 10/10 but the biggest hang up for me is the cameras. The FPV cameras available on the market are fantastic because of their form factor and quality... your thoughts? @mariofpv
Wait for my next video because I have a surprise for all! New hardware that can fit in a 3” or 2” micro quadcopter. Subscribe to now miss it. Cheers mate!😊🍻
What pc skills are needed to do all this work.....i have basic
Basic, very basic. Like copy paste text and press buttons on a GUI software. Cheers mate!😊🍻
Can i run it on mobile phone? It woupd be game changer if you can run it on phone and conect phone to goggles. But on laptop its top too, you can connect googles to it.
Yes you can forward the video stream to a mobile phone. Cheers mate!😊🍻
What is the range distance with this FPV?
There are records that the WFB-ng has achieved 100km. We did 55km. Cheers mate!😊🍻
Im use small jst connector pairs with wires, 4 pin, for uart/ethernet, usb (on cam). Low price on ali.
Cheers mate!😊🍻
Grandeeeeeeee!
Cheers mate!😊🍻
Any plans to work together with OpenHD devs?
They chose to be competitors and spread bullshits for our project. We have already teamed up with Ruby FPV and EZ-Wifibroadcast. Sadly for the OpenHD devs, they have isolated themselves while trying to promote with lies their firmware. OpenIPC is going to the top as you can clearly see. Cheers mate!😊🍻
@@mariofpv that's a damn shame they did that. well, at least thereMIGHT be some competetion or at least people to keep you guys up to beat! keep that drive going!
But if both systems are free why should there be ANY competition? Makes no sense. They just wanted to create drama with the other open source fpv communities. They had bad strategy and they are now paying for that.🤷♂️
@@mariofpv competion as in: who develops it better/faster. Money isn't the issue (while I suspect OpenHD devs are afraid of someone stealing their desing/tech and make a profit, so they will not work togheter )
@FATSNAIL-FPV no one can steal something that is already open source. You just download the code mate. If they think that anyone cares about their code they are delusional. In fact they are using the WFB-ng source code for their link(modified version), so we have nothing to steal from them. We are also using WFB-ng in OpenIPC.😊
Where is the link 3:21 ?
The video link is in the video. Cheers mate!😊🍻
He literally showed it to you.... or at least a TYPE of it
@@trentscott9991 , did you type?
Link does not work
Yes it works. Make sure you don’t type l(small L) instead of I(capital i). These are very basic skills that someone should have before proceeding with downloading and installing the software.
Otherwise please wait for the plug and play OpenIPC hardware that the developers will start selling soon. Cheers!😊🍻
Did you know you can SSH from within Windows 10 CMD now!
There are so many ways to ssh but I want to use PuTTy. It’s my personal preference. Cheers mate!😊🍻
Ok, I can just never find putty, windows search is 10/10 dog shit😂.
Oh you want to search bing to shop for putty, because of course you don't want to run putty.exe
Nice idea using an nvr BTW. I wonder if it can run of 5v.
I wonder if the hdmi can do 120fps
@@dfgaJKYes, you can but with a booster voltage (3.7v to 12v).and you need a decent battery...
@@awesomeGameplaysmaspretty sure the 12V is needed only for the optional HDD, but the onboard buck converter might need replacing for low voltages
awesome!
Cheers mate!😊🍻
Thats crazy!
Cheapest digital ground station in the world! And it’s compatible with any goggles! Cheers mate!😊🍻
Quanto costa ?
Not for sell at the moment. Online store coming soon. Cheers mate!😊🍻
👍👍👍👍👍
Cheers mate!😊🍻
+1👍❣
Cheers mate!😊🍻
Bro, ditch Windows! Awesome project.
Cheers mate!😊🍻
Bravo!
Cheers mate!😊🍻
thank you!
Cheers mate!😊🍻
how to set hdmi 1080p out, {./vdec -m 1080p60 -w ?} but not working......
./vdec to list the options. New video tutorial coming soon that will explain more details about this new technology. Cheers mate!😊🍻
looking forward to it very much@@mariofpv
Thanks nice video.
Things have gone well so far,
[ venc root@192.168.*.*:/tmp/ ] Here it says that VENC is missing. Where is VENC?