It’s always cool to see the thought process behind all the custom stuff. I wondered how you guys mounted the bed without the floor and you guys left in the video bits and pieces of how you mounted it. Nice work guys 👍🏽
Great job , Mike and Andrew! Thanks again for your information and your time! Last chemotherapy was last Wednesday! And now 5 1/2 weeks of radiation treatments! Yay!
No right buddy or wrong right the muffler the closer the back took it off said that the short bed don’t put it there no oh no no no put it. I need to take it off the show bed the window down there that sound good.
I really enjoy watching this channel! Its great to see projects from start to the youtube swear word finished. Too many channels start but never finish anything!
Glad you like them! We got a few big projects we've started prep on, but we wanted to close out our episodes on the Continental and the Chevelle before we start showing you guys any new big projects!
For that 12 bolt pin, I just did one like that in my C-10. The little keeper screw can break over the years just from stress. Sometimes you get them out with a lefthanded drill bit. I drilled through the end of the large pin to get to the broken piece small retainer screw. I went back in with an eaton truetrac and set of yukon gears, bearings, and shims. 10/10, would recommend.
Man I fell like you could have tacked a nut to that pin then a slide hammer it out cutting the carrier is crazy lol I guess if uprading everything not a big deal ha
Has anyone ever lowered a truck using portal axles mounted upside down? It seems like you might be able to get more use of the truck bed if you did this (the differential wouldn't protrude as much into the bed).
I'm not sure if I'm seeing what looks like the rear sub frame, isn't far enough forward' or if it is just the angle of picture taken, but if you follow the arch of rear suspension it looks like it will run into the frame rails, maybe it's centered, it's just hard to tell from this angle, the build looks great so far, keep up the good work.
It’s always cool to see the thought process behind all the custom stuff. I wondered how you guys mounted the bed without the floor and you guys left in the video bits and pieces of how you mounted it. Nice work guys 👍🏽
Thank you!
Great job , Mike and Andrew! Thanks again for your information and your time!
Last chemotherapy was last Wednesday! And now 5 1/2 weeks of radiation treatments! Yay!
Hell yeah! Hope you're feeling a bit better!
Congratulations 👏👏 i
Wow, I'm really digging that GSI Kit... and that Plasma table is Super Productive! GREAT work guys! Looking fantastic so far!
No right buddy or wrong right the muffler the closer the back took it off said that the short bed don’t put it there no oh no no no put it. I need to take it off the show bed the window down there that sound good.
I really enjoy watching this channel! Its great to see projects from start to the youtube swear word finished. Too many channels start but never finish anything!
Glad you like them! We got a few big projects we've started prep on, but we wanted to close out our episodes on the Continental and the Chevelle before we start showing you guys any new big projects!
For that 12 bolt pin, I just did one like that in my C-10. The little keeper screw can break over the years just from stress. Sometimes you get them out with a lefthanded drill bit. I drilled through the end of the large pin to get to the broken piece small retainer screw. I went back in with an eaton truetrac and set of yukon gears, bearings, and shims. 10/10, would recommend.
We'll definitely check that out when we rebuild it!
Amazing work
Thanks a lot 😊
I bet 'the customer's' going to be really impressed with this when you guys are done with it!
You guys did a phenomenal job on this!
Thanks!
coolest compressor mount ever.
It really is! Thanks 🙏🏻
Yes! You guys build some of the best C10!
Thank you so much!
Sick work! 🔥
Glad you like it!
Saludos desde Puerto Rico 🇵🇷.Hermoso trabajo el que hacen impecable 👍
Build is going to be so sick!! P:in stuck no worries Just put a 7 inch cutoff wheel on a 4.5 grinder and get it out!! hahaha
My savages Happy Fourth July to y’all and the families
Happy 4th Luis!!!!
I love your videos you guys do awesome work maybe you can make longer videos
We could, but we'd rather have shorter episodes full of work and info, rather than longer episodes stuffed with filler and nonsense!
Looking good guys.
Thank you!!
Man I fell like you could have tacked a nut to that pin then a slide hammer it out cutting the carrier is crazy lol I guess if uprading everything not a big deal ha
Everything is getting replaced anyways so it was just easier to cut it all out
Another great episode boys, keep up the good work.
Thanks!
what size angel are yall using for the floor? Is that 2x2?
🔥🔥🔥🔥
When speaking of truck beds, the front of the bed and the back of the bed mean the same thing, funny.
Seeing Mikey in long pants and boots is really throwin' me off. 😅
Has anyone ever lowered a truck using portal axles mounted upside down? It seems like you might be able to get more use of the truck bed if you did this (the differential wouldn't protrude as much into the bed).
Killer. That’s my kind of truck.
Glad you like it!
👍💪
💪👊👏
Is that 4 link bolt on
It's welded onto the axel and then the frame end is bolted in
Is that axle upside down?🤔
Like very much
Thank you!
My 82' S10 is static drop. No C-norch and no real reason for a raised bed floor, other than so people will stop asking for me to haul shit, 💪🏽🤣💪🏽🤣💪🏽🤣
All of my trucks are lifted because I am a hardcore 4 wheeler. That being said, what do you mean by a "static drop" ?
Wish i had that bed floor u cut out! The floor of my bed is rusted to hell.
It might still be up for grabs if someone hasn't bought it yet
Yo! Where has Dave been?! Hope he’s still part of the familia!!
Dave is here brother, you’ll see him next week. 🙏🏻
Fueling the truck in the bed is dangerous, because the fuelvapours can’t escape. One spark and you’ve got fireworks.
Well there is a vent, also the bed is completely open at the bottom. Plenty of ventilation
Dang. How long did it take just to cut the carrier out of that rear end. Always fun tomfollow a HACK 😡
Make sure to tag us in a video of you working on your build to show us how it's done!
Hey can kiwis enter to win? It’d be criminal if we couldn’t.
Guys... your rear is upside down..
I'm not sure if I'm seeing what looks like the rear sub frame, isn't far enough forward' or if it is just the angle of picture taken, but if you follow the arch of rear suspension it looks like it will run into the frame rails, maybe it's centered, it's just hard to tell from this angle, the build looks great so far, keep up the good work.