TReMoR 2 Horus Vision Scope Reticle

Поделиться
HTML-код
  • Опубликовано: 23 сен 2024
  • This is a powerpoint that was sent to me by Horus Vision. I Hope to share some of the key features of the Tremor2 reticle.
    Something I forgot: When you dial 5 mils, the wind dots go to half value, when you dial 10 mils, wind dots go to 1/4 value
    Reticle Description :30
    Milling formulas 3:30
    H59 vs TReMoR2 7:06
    Speed Milling Drills 9:10
    Gun Value 9:50
    Wind Hold Dots 12:50
    There are things I'm sure that I left out and features I am not even aware of, this reticle truly is impressive.
    Let me know if you have any questions and I will try to answer them if I can.

Комментарии • 21

  • @TheIslandExpat
    @TheIslandExpat 8 месяцев назад +1

    435 meters is roughly 476 yards for anyone that might get confused.

    • @alexuswilliams5426
      @alexuswilliams5426 Месяц назад

      yea... add 10% to the 435 meters equals 478 yards...

  • @alexuswilliams5426
    @alexuswilliams5426 Месяц назад

    The 12 inch drill got confusing. the 10 gun stuff results did not look right. i initially saw how you got the red dot below the blue dot, however when (12:31) the red dot was directly on top of the blue dot and aligned with the number mils. Does not make sense. unless it was an example on what it looks like when you along the target with your mil result/reading

  • @konstantinosmastromanolaki3318
    @konstantinosmastromanolaki3318 4 года назад

    Just Amazing Video !!!

  • @coltonwinstead7758
    @coltonwinstead7758 7 лет назад +1

    awesome video, thanks man

  • @davidchantladze4805
    @davidchantladze4805 6 лет назад +1

    Help me please what is difference between horus 37 58 59 and tremor2-3,I am going to buy Schmidt & Bender 5-25x56 PM II / LP / MTC / LT, But I do not know what the difference is between these figures.Help me please.

    • @KameronATM
      @KameronATM  6 лет назад +1

      David Chantladze I believe you should limit your search to the H59 and the tremor 3. These are the current updates of the 2 different options reticle paths. I believe the tremor 3 is the best option because it takes the refined mill holds of the h59 and adds calculated wind dots while not removing the mill sub tensions should you choose to use them over the wind dots. Does that make sense? Best of both worlds

    • @davidchantladze4805
      @davidchantladze4805 6 лет назад

      Thank you brother.

    • @Garyalarson1
      @Garyalarson1 6 лет назад

      David Chantladze did you end up buying that SB? Depending on what you are using it for there are likely more affordable options that offer the Horus reticles. Going down Range to smoke check bad guys the SB is def the way to go. Smacking steel at matches, ATACR or XRSII will check all the boxes.

  • @AggiePhil
    @AggiePhil 7 лет назад +1

    Thanks for the video but holy crap. I celebrated [barely] passing my last college math class for a reason. Way too complicated for me!

    • @KameronATM
      @KameronATM  7 лет назад +1

      AggiePhill haha yeah the wind dots are the simple meat of it all. ps gig em!

    • @Garyalarson1
      @Garyalarson1 6 лет назад

      AggiePhill the TreMor 3 is much better. Honestly I prefer the Bushnell G3 or Vortex EBR2C reticle. It’s also what most shooters prefer. But if you never plan on dialing and commit to the Horus system it can be awesome.

  • @KameronATM
    @KameronATM  6 лет назад

    Fyi: I get 4mph wind dots for my .308 175gr, 113gr 6.5 grendel, and 140gr 6.5 creedmoor, and 200gr eldh 300winmag. Pretty amazing

  • @KameronATM
    @KameronATM  6 лет назад

    Wind holds start around minute 13

  • @Andiespringer1234
    @Andiespringer1234 7 лет назад +1

    this is good its a start.

  • @KameronATM
    @KameronATM  7 лет назад

    Does anyone know where to get an instructional video on the H59?

    • @HorusVision
      @HorusVision 6 лет назад

      Hello Kameron, We apologize for the delayed response. Since taking ownership we have received similar requests. We are working on this and will post them on our website once they become available. Thank you!

  • @andresc.4049
    @andresc.4049 5 лет назад

    Por favor en español