Hey Gary!! this is neat to learn. Because when it comes to the timing aspect of a sprinkler I always wondered how it is set up. Thank you for sharing!! I truly appreciate you!!
1. Double check that the outlet the timer is plugged into has current. 2. Next remove lower panel and make sure the push on power connector is still attached. 3. Check to make sure the common wire is still attached to the timer.
Make sure the station are programmed in the A or B program and the selector switch below them is in the correct location A…..B…or both. Be sure to set a start time for that program and chose your watering day you want “On.”Then put into Auto
I'm trying to add a day in my watering days I can't figure out how. I'm only allowed to water one day a week just moved in so I cleared all the days but the day I'm suppose to water is the only day that didn't have an arrow
You have it reversed, the only day with an arrow should be your water day. Use the clear and enter buttons to remove the unwanted and add the wanted. Hope that helps, don’t forget to Subscribe ✌️
Had a power outage. I slide it up to turn on and it doesn't not turn on any longer. I had to buy a new transformer for my timer pn57006 as well which got it running except for individual slide turn on function.
@@garyssprinklerrepair Thanks. It didn't but I replaced transformer. I can set the date and time and program it. It isn't exactly like yours. Older model. I do have the sliders. It had the option to slide up to turn on and then back down to minutes. That part no longer works for all 6 stations. I probably have a burnt circuit on a circuit board? Will call orbit and ask for schematics. But they man the help line with young girls that said to call my electrician when I ask about solenoids and wiring lol. I may get no where. But will try. Saves a hundred bucks if I can fix it.
So you’re saying that you plugged something into the same outlet that the timers plugged into? (Light, blow dryer etc.) to Verify the outlet is working? I only ask because even with a new transformer if the timers only running on battery power it will show a display and appear to do what you want it just won’t turn the valves on. (Not enough current) I usually tell people to remove the batteries it the display goes out the timer has now power.
@@garyssprinklerrepair lightening strike on mother's day. Our weather was still cool enough that sprinklers hadn't been turned on and I had no clue sprinkler were effected. It hasn't before. We've had other close sounding lightening and thunder before. I moved a slider of station 1 up to on. Tested @ dca20 setting and had no reading. I sent it around in all zones on cycle once and it triggers all the stations and it tested 11 to 14 fluctuating on the tester. Could be I have a short? Do I cut the tip of a wire, strip it and plug it back in? Idk if that's a fix for a short? Not an electrician lol.
Trying to reset the time on my Orbit Watermaster Model No 57606-wt8, and it's unsuccessful. Mine has the same setup, but the dial doesn't "click" in the right settings. The time won't set, but date will. Help!
I have a WaterMaster 4 stations. All of a sudden it looks like it stopped watering as my lawn is turning yellow. The clock appears to be working, but the Instructions appear to be Greek to me. I am 73 years old. Do you have an instruction video for a 4 station setup? Thanks.
@@garyssprinklerrepair Thanks for the reply. I did not realize I had to OPEN the cover. Once I did that, I can see where the instructions would be very similar to the 8 station unit. If I can't figure this out, I will have to ask my son to come over and help. Thanks again.
You might have a bad transformer, remove the AA Batteries and if the timer dies you might have a bad transformer. Some version of this timer have a fuse it might be blown, if it’s blown, the batteries will show “pwr” on the display.
2 years later and it's helping me set up a friend. Thanks!
Glad it’s still helping you.
Thanks for this wonderful tutorial friend watching here from the Philippines God bless your home
Cool water master timer my friend
Hey Gary!! this is neat to learn. Because when it comes to the timing aspect of a sprinkler I always wondered how it is set up. Thank you for sharing!! I truly appreciate you!!
Glad to see you in the comments, hope you’re channels doing well and y’all are staying warm.
Wow its amazed me for these very useful water master ...Sana all merun nito.. keep going and stay connected from Yolanda ...
I'm glad you're active again
Thank you, this video took 4.5 hours of editing. Couldn’t get the thumbnail perfect. Thanks for commenting.
Wanderful share @Gary's Sprinkler Repair we miss you💯 nice to see you active again.
Thank you, sometimes life gets in the way
This content is very intertement.thanks for sharing your knowledge..new friend is here..
This one is better than the complicated old one we have
This water master timer looks like a great system to have!
Great job watching here
Very informative video, keep on sharing videos
Amazing technology great content
Thank you for your nice comment
Watching here sir Gary thank for this informative video.
Hey donut girl, haven’t caught one of your live streams lately. Hope your staying healthy.
@@garyssprinklerrepair it's ok 😊
It's a great to have this water timer my bro thank you for showing us this water timer keep safe n godbless ummuaahhh..YOLANDA
À
ALONA blogz, you’re the Best. Thank you for your support.👏
This is awesome one sir Gary.. much love sir...
Hello new friend thank you for your tutorial
Great share my friend. Very informative video.
Thank you for leaving such a great comment. Welcome
Hello,glad to know how to use it.
Thanks for this video.
Elsie you’re so awesome, I think of my Grandmother every time I see your name, and it makes me 😀
Thanks for sharing that video
Thanks for sharing this
Chrissy
Thanks for sharing sir Gary. Take care
Giancess, I’ll be sure to watch something at your place later. Thank you
your such a pro my friend .. lots of wires to know which is which haha .. thanks for this video . god bless and always take care
Awe you’re gonna make me blush.😊
It's great to have this water timer .i need this. Thanks for sharing.
Inday Kim Pinay, nice to see you stopped by. You’re awesome.
this is awesome more videos from you
Ya, I know everyone keeps saying I need to upload more often. 😁
Good water system and many people learn about using it so helpful sir
this is really good water master time movie show thank you
Thx Yolanda, not too exciting but necessary.
Thank you for sharing this Gary
Jenny, you’re such an awesome Creator thx.😉
@@garyssprinklerrepair thank you 🎉
How nice to have that water timer
Thanks for sharing this one ona
Glad you found it useful. Nice. Comment
Thank you for sharing your video brother
Thank you for leaving a kind comment too
That was so nice chrissy
Thanks for sharing this
The timer aspect of a sprinkler system nice learning information here
The N.D.T Show your such a great supporter, can’t tell you hope much it’s appreciated.
Tamsak done
Your water timer so great sir gary.
-maryannona
Thank you for stopping by and leaving a comment for us.
Great thanks for sharing ussssss
Giovz TV, thanks for leaving a comment.
@@garyssprinklerrepair your welcome hope you well visit my livestream everyday
Wow.. the best
thanks for sharing this chrissy
So great sir your water timer
Thanks for sharing
-maryannona
Watching sir thanks for sharing
Cabuslay Fam Vlog, happy you were able to stop by and watch my new video. Appreciate it. 😉
ThankU for sharing sir ive learn something today God Bless fr.MaryAnnona
Great video! My question is, if I only use A setting, will my sprinklers only water for the two weeks or will they water on my set days all weeks?
All weeks, hope that helps
Hi sir Gary's are you technician? We dont have a timer in our shower. We only using pale tru feucet.
Yes, I’m a technician I suppose. The time is for landscape irrigation control. Not probably going to help you with a shower 🧼
oh I see..thank for thw info my friend..i will let your ads playing till end ❤
This is very important in our house good to know this
hello Gary ..nice tutorial..Ona
Always nice to see you stopping by. Thank you for you nice comment
So amazing host
Couldn’t find your channel, thanks for dropping by.
Hello Gary! Thank you for this video. Question: do you knowledge where the fuse is located? Thanks!
This timer doesn’t have a fuse, just a reset
THANKS for sharing
this is great machine water timer
hello Gary love from Ona and Fleur de lys ptv..⭐
Nothing happens when we push to auto...and have the sections on. Is there anything we need to do at the sprinkler heads or in general?
1. Double check that the outlet the timer is plugged into has current.
2. Next remove lower panel and make sure the push on power connector is still attached.
3. Check to make sure the common wire is still attached to the timer.
👍👍👏👏
Hello muito legal seu trabalho amigo
RM I don’t speak Spanish, but I think you said something about hard work and friend? Much appreciated ✌️
I have the same controller and I followed this video for easy programming. I notice the automatic setting isn't working. Is there a reason for that?
Make sure the station are programmed in the A or B program and the selector switch below them is in the correct location A…..B…or both.
Be sure to set a start time for that program and chose your watering day you want “On.”Then put into Auto
Let me know if you still have questions. Don’t forget to Subscribe ✌️
I'm trying to add a day in my watering days I can't figure out how. I'm only allowed to water one day a week just moved in so I cleared all the days but the day I'm suppose to water is the only day that didn't have an arrow
You have it reversed, the only day with an arrow should be your water day. Use the clear and enter buttons to remove the unwanted and add the wanted. Hope that helps, don’t forget to Subscribe ✌️
God bless Gary’!!
I can’t tell you what it means to me to always see your comment, showing up in my few Live Streams. You’re the epitome of a true supporter.👊
Had a power outage. I slide it up to turn on and it doesn't not turn on any longer. I had to buy a new transformer for my timer pn57006 as well which got it running except for individual slide turn on function.
First thing to do is check the outlet for power
@@garyssprinklerrepair Thanks. It didn't but I replaced transformer. I can set the date and time and program it. It isn't exactly like yours. Older model. I do have the sliders. It had the option to slide up to turn on and then back down to minutes. That part no longer works for all 6 stations. I probably have a burnt circuit on a circuit board? Will call orbit and ask for schematics. But they man the help line with young girls that said to call my electrician when I ask about solenoids and wiring lol. I may get no where. But will try. Saves a hundred bucks if I can fix it.
So you’re saying that you plugged something into the same outlet that the timers plugged into? (Light, blow dryer etc.) to Verify the outlet is working?
I only ask because even with a new transformer if the timers only running on battery power it will show a display and appear to do what you want it just won’t turn the valves on. (Not enough current) I usually tell people to remove the batteries it the display goes out the timer has now power.
@@garyssprinklerrepair lightening strike on mother's day. Our weather was still cool enough that sprinklers hadn't been turned on and I had no clue sprinkler were effected. It hasn't before. We've had other close sounding lightening and thunder before.
I moved a slider of station 1 up to on. Tested @ dca20 setting and had no reading. I sent it around in all zones on cycle once and it triggers all the stations and it tested 11 to 14 fluctuating on the tester.
Could be I have a short?
Do I cut the tip of a wire, strip it and plug it back in? Idk if that's a fix for a short?
Not an electrician lol.
Ok, well then you have power just not enough. You need close to 24 v -28 v to turn on a valve.
Keep it up godbless stay safe fr chrissy
Trying to reset the time on my Orbit Watermaster Model No 57606-wt8, and it's unsuccessful. Mine has the same setup, but the dial doesn't "click" in the right settings. The time won't set, but date will. Help!
Have you tried the Program reset?
@@garyssprinklerrepair several times. I did get the clock time set correctly, but it doesn't keep time. Not sure why?
Unfortunately sounds like it’s time for a new timer.
Keep on vlogging godbless from chrissy
done watching . from Mery Ona
I have a WaterMaster 4 stations. All of a sudden it looks like it stopped watering as my lawn is turning yellow. The clock appears to be working, but the Instructions appear to be Greek to me. I am 73 years old. Do you have an instruction video for a 4 station setup? Thanks.
They instructions will be the same as a 6 station or 9.
You might have a bad solenoid or valve.
@@garyssprinklerrepair Thanks for the reply. I did not realize I had to OPEN the cover. Once I did that, I can see where the instructions would be very similar to the 8 station unit. If I can't figure this out, I will have to ask my son to come over and help. Thanks again.
Hope you took a minute to Subscribe to our Channel it really helps us grow.
Thanks for sharing. CHRISSY
Nice sharing .....#yolanda loyola
Inday Kim Pinay thx for you nice comment. Be sure not to include # because RUclips puts the comment in held for review.✌️
@@garyssprinklerrepair ok my friend
New friend prom pinas pull pack
Keep vlogging from madam ona
Keep on vlogging from madam Mary Ann ona
💞💞
Thx for checking out the video. Hope you’re doing good too.
No problem we are family...as for me not doing soo well been really really sick but trying to hang in there..stay safe and blessed🙏💞
My screen says no power. I’ve reset all of the breakers and plugged ac into an extension cord.
You might have a bad transformer, remove the AA Batteries and if the timer dies you might have a bad transformer. Some version of this timer have a fuse it might be blown, if it’s blown, the batteries will show “pwr” on the display.
When we lived down south we did
I need this thing
Storm USA Tv, I don’t believe they sell this model anymore. Thank you for leaving a comment. 😉
Enjoy your livestreaming chrissy
I wish I had sprinklers
Easy enough to install some, y’all’s Channel is really entertaining.👍
@@garyssprinklerrepair thanks we try
Amazing water timer #yopandaLoyola
I watched it again with ads#yolanda
Nice.... chrissy
Hello sir gary. From risa
Hello nice to meet you, I stopped by your channel as well.👍
Thanks for your tutorial
For water timer
-maryannona
May laban po iyan ona
Wala kaming gamit na ganyan Ona
Looks like you tube forgot to let me know your here
Glad you could still find me, your comment always makes me smile.
Keep on vlogging from madam ona
Nice dancing in your video too