I don't even have a Samsung tablet but I bought one of these kits anyway just to help support this channel. I love amplified I've been watching for years. Keep it up Doug. 👍
Is the passenger window busted out of the thunder chicken? Get job bro. Love coming home from work and kicking back to watch a new episode every day. Thanks
I'll let you know what's up! How about making small bookshelf speaker boxes? Would make for a nice quick cnc router project. You could also make kits to sell. Maybe work with your speaker client if they have a good fit for the enclosure. My 2 cents worth. Your killing it man. Love what you're doing.
This kit should have alignment holes in the corners and ship with small dowels for assembly. Things tend to shift when gluing/clamping, especially the the piece with the charge port cutout. It shouldn't cost you any more. You could even pre-assemble and charge more. Try spray contact adhesive instead of glue. Just insert dowels, press layers together and your done. You could even make a press for assembly with your plasma cutter and just pump them out. Just tryin' to help ;)
Doug you should make the top panel of this note 7 kit out of a thicker peace of material upside down on the CNC router and up can eliminate the middle peace. Maybe save time in the long run.?
Greetings from Portugal Doug!! i work with PVC foam everyday,and the problem with it,in your application, is that PVC reacts to heat,usually it "grows", and may look warped - twisted 😅😅 but it depends on the grade of the PVC, because some are more " foamy" than others...
I'm going to start out by saying that my knowledge of CNC is limited so unsure if this is possible. Having said that, it just seems to make sense that you could program a 'home' position (or maybe there's one pre-programmed?)? That way you move/set your board up on the table at the same position instead of moving the head to match the board position (so for example you always flush fit the board in the bottom left corner of the table and the head will start/move to the same position in relation to that corner regardless of the design you create). Seems like that could save you time in set up especially if you start recording zero positions for certain types of material.
I would be interested in buying a kit if you made one for an iPhone 6+, there is no good place to put the phone when driving a jeep wrangler, if I could insert it in front of the after market double din that would be awesome!!
Hey Doug, what episode is that clip from where Rafa's raging pissed and says "seriously quit fucking around right now fuck off"?? I remember watching it forever ago, but I can't remember which episode.
I don't need one of these in my car but I'm thinking this would be a cool way to take old devices sitting around and integrate them into my smart home install.
Dammmmmmmmmm Doug, that's exactly what I need for my truck a mdf s7note dash kit, so If my shotty ass wiring doesn't burn the truck now my note charging while I drive! ship me 2 one for my truck now then one for my new one after my insurance claim!
Too bad you can't handle my big, thick, 3.5" 1tb hard drive. I've one in a external case, but the case died. HD still good. Too thick for a lappy though. But now! What car did raffas mom co-sign for? ;-)
Well Damn Doug your just that good my brother and good friend . Hopefully one of these day's we can meet in person i'd like to meet you sometime feel what it feels like to meet a legend
Dooope shit Doug! Not sure if your home depot is nice enough to not charge for cutting sheets down. Out here in Kansas, 2 of those 2x2s are the cost of a full 4x8 sheet of mdf. Hope you can save some money man!
Doug, make a Samsung Tab S 8.4" kit bro. The 8" and the 7" tablets specs are weak in comparison. I can ship you mine so you have one to make a model off of so long as you ship it back to me so I can use it. LOL. Doug, send me one of those abs/foam ones along with the wood one I ordered, for testing purposes of course! LOL
ik this episode is old but build a pc and stack as many hard drives and ssds in there as you like get a couple 10TB hard drives and load whatever os you want on it then use that to edit and what not. definitely could have built a pc with better specs than that macbook for less than the macbook.
You should sell the Tbird and use that money to hire someone to help you get your business/youtbe chanel/proyects going faster. Not a hater just giving my opinion.
I used final cut for YEARS!!! i started on FC7 then moved to FCPX as soon as it came out, BUT the newest version is a buggy piece of shit that never gets fixed! constantly crashed on me.. i had to bite the bullet and switch a few months ago.... :,(
Why don't you just use 2 layers, bottom and mid layers in one layer and tge top one will be the same, i guess you can engrave it right along with the port section at once
If you were only running a PC you could just slap in some 5 terabyte drives. I mean Apple can do that right? You might want to look into some synology backup drives, that will eat into your budget for feeding rapha's mom but sacrifices have to be made.
Lot of people asking about different android dash kits. Just my opinion.. but until Android works as easily (meaning plug and play) as an iPhone does with ALMOST EVERY CAR STEREO MADE IN THE LAST DECADE it's really a waste. I have android, always have, and I hate the way android phones interact with car stereos. Granted they are coming out with Android Auto but those headunits are EXPENSIVE compared to the hundreds of other stereos that seamlessly control iPhones. Unless your purpose is to simply have something nice to hold your android device then rock on. I just throw mine in the cupholder but to each his/her own I guess.
I wonder if Rafa is cool with Doug, since he's always talking about him and his mom. IDK there's going to be a day when Rafa is going to say enough is enough ...
I don't even have a Samsung tablet but I bought one of these kits anyway just to help support this channel. I love amplified I've been watching for years. Keep it up Doug. 👍
What up Douglas? Love how eyeballs go from not blazed to blazed!
Your double stick tape budget is off the chain
God damnit Doug get your shit together I can't be missing 2 episodes this week. What the hell am I to do durning class now.
Is the passenger window busted out of the thunder chicken? Get job bro. Love coming home from work and kicking back to watch a new episode every day. Thanks
Also wonder why the bottom and middle pieces can't be made into one. Maybe 1/2" mdf?
WHAT UP YA'LL!!! 🙌🙌🙌🙌
Yooooo🖕🏻🖕🏻🖕🏻🖕🏻🖕🏻
THe legend!!!
What up!!
Do you make kits for iPhone 6s Plus?
I'll let you know what's up! How about making small bookshelf speaker boxes? Would make for a nice quick cnc router project. You could also make kits to sell. Maybe work with your speaker client if they have a good fit for the enclosure. My 2 cents worth. Your killing it man. Love what you're doing.
This kit should have alignment holes in the corners and ship with small dowels for assembly. Things tend to shift when gluing/clamping, especially the the piece with the charge port cutout. It shouldn't cost you any more. You could even pre-assemble and charge more. Try spray contact adhesive instead of glue. Just insert dowels, press layers together and your done. You could even make a press for assembly with your plasma cutter and just pump them out.
Just tryin' to help ;)
Doug you should make the top panel of this note 7 kit out of a thicker peace of material upside down on the CNC router and up can eliminate the middle peace. Maybe save time in the long run.?
Aww man only 3 eps this week, good luck homie, keep the show going.
when he does his cut scenes where he's just talking, i always end up cracking up the whole time.
Doug, you ever think about using HDPE? It cuts nice, slightly flexible and can be CA together. Not sure how it holds up too bondo and paint tho..
Such a visionary. I need a iPhone 7 Plus slider kit. New phone is on the way
wtf am I supposed to do with the extra days off your taking? lol love the show keep up the good work!
It looks like you go through tons of that double stick tape, and that may get expensive after a while. Is there any way to just clamp down the wood?
It's probably part of his sponsorship from mobile solutions
Just make it out of 3/4" and make a jig to rout the charge port and use a woodruff cutter to make the under cut for the slide relief.
Or if you didn't want to change the bit you could combine the bottom 2 plates out of 1/2" mdf and keep the top plate separate.
Doug look into Drobo, it's a raid solution for hard drives. You just swap em out as they get full or damaged. No need to replace computer.
man I love this show please keep up the awesome work u have thought me a few things
Definitely need that 6+ cheap slider
Greetings from Portugal Doug!! i work with PVC foam everyday,and the problem with it,in your application, is that PVC reacts to heat,usually it "grows", and may look warped - twisted 😅😅 but it depends on the grade of the PVC, because some are more " foamy" than others...
+marco silva good to know!! THANK YOU 👌
I'm going to start out by saying that my knowledge of CNC is limited so unsure if this is possible. Having said that, it just seems to make sense that you could program a 'home' position (or maybe there's one pre-programmed?)? That way you move/set your board up on the table at the same position instead of moving the head to match the board position (so for example you always flush fit the board in the bottom left corner of the table and the head will start/move to the same position in relation to that corner regardless of the design you create). Seems like that could save you time in set up especially if you start recording zero positions for certain types of material.
hey great videos..how thick is the MDF that you use to make these kits
whatever happened to the Nexus 7 dash kits you had? I'm installing one in my Rsx and I'd like that kit instead of making a base out of fiberglass
Have you field tested these in a vehicle with any kind of bass? I would think without magnets it would vibrate a lot or fall out. Just curious. LIKED!
Loving the gran turismo lobby music
doug if want to save on material costs try starting your cuts closer to the corners approx. 1/2" back on either side. keep up the funny vids haha
Brother I know the feeling "Maxed Out " !!!! Lol.
Doug, why don't you make the first two layers of the dash kit from one peace then glue the top on. Wouldn't that save some time in the long run?
With the CNC Router, I would think you could make the top and middle pieces out of one piece?
Doug can you make a cheap Ipad mini slider kit. Some of us don't have them deep pockets?
I would be interested in buying a kit if you made one for an iPhone 6+, there is no good place to put the phone when driving a jeep wrangler, if I could insert it in front of the after market double din that would be awesome!!
Doug I have an 09 Ford Flex I want to do a tablet in and I have an apple air 2 or a Samsung galaxy 10.2 what would you recommend
Hey Doug, what episode is that clip from where Rafa's raging pissed and says "seriously quit fucking around right now fuck off"?? I remember watching it forever ago, but I can't remember which episode.
hey Doug, Which video did you make a joke about rafas mom where you said it's like throwing a hotdog down a hallway? I must watch it again.
Hey Doug, cover the Nexus tablets! they're very good choices on the Android side.
totally did that to my moms car when i was 16 (back in 1997). Maaaan, she was pissed i chopped up her dash to fit in a pioneer radio...good times
Do you have a kit for a 2014 Subaru XV crosstrek for a samsung tab s7??
Omg the mom jokes don’t get old I’m dying 😵 👈 over here
Keep up the Epicness!
Doug, is getting 1/4" sheets of ABS cost effective?
cant wait for the tbird
Nice work DUDES !!! can i order the slider kits to send to Brisbane Australia bro ??
For that price it damn well better be glued together.
Just one question... Is it not possible to make one Router Cutter, that cuts the kit in one passe ?
Wouldn't it be easier and/or more cost efficient to do the bottom two layers into one on some 1/2 inch mdf?
doug is kind of addicted to that doublesided tape.
So I'm getting ready to move across the country, and I have stacks of old hard drives I'd like to not have to pack, if you'd like them?
good shit dougy boi love ya work you should do some kits for the new samsung note 7s pretty please
if you put the kit together in reverse you could clean up any squeeze out between the top and middle piece.
Do you know how well the micro usb for the androids will hold up?
hey do you have those on your website i could not find them
Which 8" Galaxy Tab does this fit?? E, A or S2??? Cuz unless I'm mistaken I believe the body of all 3 are different...
Can't wait for you to cover the samsung tablets with these cheap sliders... I want one...
Add to the To-do List: Make a catchy auto-tune remix of Rafa quotes
Sell some "Rafa's Mom" T-shirts and buy yourself a couple of drives!!
I'd buy that one!
I'd rock a Rafa's mom shirt for sure lmao.
I don't need one of these in my car but I'm thinking this would be a cool way to take old devices sitting around and integrate them into my smart home install.
Dammmmmmmmmm Doug, that's exactly what I need for my truck a mdf s7note dash kit, so If my shotty ass wiring doesn't burn the truck now my note charging while I drive! ship me 2 one for my truck now then one for my new one after my insurance claim!
Doug, not sure if your old intro music is yours, but this dude is using it...russtuff....just an fyi...
Why don't you make the kit 2 piece? Cut the bottom two layers in one layer?
Too bad you can't handle my big, thick, 3.5" 1tb hard drive. I've one in a external case, but the case died. HD still good. Too thick for a lappy though.
But now! What car did raffas mom co-sign for? ;-)
i have a drobo with 4 x 3tb drives in it.... FULL
just setup a damn NAS 16tb of rafas mom jokes no problem!
you should make an Ipod 5th gen dash kit, I'd buy it.
Please tell me you have data backups!
Well Damn Doug your just that good my brother and good friend . Hopefully one of these day's we can meet in person i'd like to meet you sometime feel what it feels like to meet a legend
i don't watch for the great ideas, i watch for the rafas mama jokes...
Dooope shit Doug! Not sure if your home depot is nice enough to not charge for cutting sheets down. Out here in Kansas, 2 of those 2x2s are the cost of a full 4x8 sheet of mdf. Hope you can save some money man!
will this fit the new tab S2 ?
Got eeeem! Wasn't Rafa supposed to help you last weekend?
What is the name of that mariachi song?
Can you do one for 05 Honda CR-V?
Draw a 2x2 square and try to fit 3 kits in the area. Then remove the square in the software.
how about iPods install kits that would be nice. love the videos.
I want to see Rafa in just one episode please! :D
you damn well i takes more than episode to fully see her lol
Do your stuff on the weekend ? Already only 5 now 3 ? Oh and make a iPad Pro kit already!
Doug, make a Samsung Tab S 8.4" kit bro.
The 8" and the 7" tablets specs are weak in comparison.
I can ship you mine so you have one to make a model off of so long as you ship it back to me so I can use it. LOL.
Doug, send me one of those abs/foam ones along with the wood one I ordered, for testing purposes of course! LOL
If you start to make kits for phones make one for oneplus 3 TY!
" if Rafa had asocial security number " omg rlmao I guess it's funny cuz I'm Mexican I know what you mean Doug wooooow that was funny
Doug you need to get some terabyte hard drives
bruh..... i have over 20 full harddrives
Doug where you the first person to put a iPad in the dash of a car?
yes :)
Doug idk how to reply to your comment cause they fucked up youtube comment section again lol. But that's dope man
How about a iPhone 7 plus slider kit ?!!!
Make a Samsung Note 7 kit, but it needs to be fireproof.... That MDF will go up in flames like Rafa's mom when she sees tacos.
Doug you can't take a break damnit what the he'll am I supposed to watch while I'm at work.................
Doug you need a Patreon so we can all kick a couple pesos your way each month.
+djhaloeight I know!! I need to set that up! 🤑🤑
come on, fix it NOW i get my money this Friday! i wanna se a site online before that!
Android Dash kit? You're going to need a looooot of different kits.
ik this episode is old but build a pc and stack as many hard drives and ssds in there as you like get a couple 10TB hard drives and load whatever os you want on it then use that to edit and what not. definitely could have built a pc with better specs than that macbook for less than the macbook.
You should sell the Tbird and use that money to hire someone to help you get your business/youtbe chanel/proyects going faster. Not a hater just giving my opinion.
+Jean Reol it's so funny that you say that... I was literally just thinking that I need to get some help in here, 5 minutes ago
I would be willing to relocate...to work with the legendary Doug Bernards (insert explosion footage followed by john cena theme) lol
How about a Surface Pro 2 kit
wood in my dash um no +SoundmanCA
i like the idea of the iphone slider but don't most people use a case on their phones making it a pain to dash mod them
Doug! Stop using CC and go for Final Cut Pro X! It's going to be faster AND cheaper!!
I used final cut for YEARS!!! i started on FC7 then moved to FCPX as soon as it came out, BUT the newest version is a buggy piece of shit that never gets fixed! constantly crashed on me.. i had to bite the bullet and switch a few months ago.... :,(
Wow, that is sad!!! Well go get that credit then ;p !!!!!!
Why don't you just use 2 layers, bottom and mid layers in one layer and tge top one will be the same, i guess you can engrave it right along with the port section at once
Do a Go Fund me bro we got you $1 at a time
THANK YOU!!!!
I got a dollar for Doug too, set it up and post a link.
I need more of that John Cena theme music!
Nice!
USB external HD maybe?
+Matthew Sargent yeah!... I have 20 external drives ALL full of footage!!... just got three more!! 🙌🙌🙌
Dang.. time for a NAS.
You should make a cheap iphone 6 and 6 plus and even the new iphone 7!!! Id buy one
take a break on deez nuttz. NO DAYS OFF!
If you were only running a PC you could just slap in some 5 terabyte drives. I mean Apple can do that right? You might want to look into some synology backup drives, that will eat into your budget for feeding rapha's mom but sacrifices have to be made.
Lot of people asking about different android dash kits. Just my opinion.. but until Android works as easily (meaning plug and play) as an iPhone does with ALMOST EVERY CAR STEREO MADE IN THE LAST DECADE it's really a waste. I have android, always have, and I hate the way android phones interact with car stereos. Granted they are coming out with Android Auto but those headunits are EXPENSIVE compared to the hundreds of other stereos that seamlessly control iPhones.
Unless your purpose is to simply have something nice to hold your android device then rock on. I just throw mine in the cupholder but to each his/her own I guess.
Crossing my fingers for a S7 Edge kit.
I wonder if Rafa is cool with Doug, since he's always talking about him and his mom. IDK there's going to be a day when Rafa is going to say enough is enough ...
Cut holes in my dash? Never! I'll just shoot a couple drywall screws through that thing and blend the edges with an angle grinder. Dunzo.