WOODMAN NEO GO Android Stereo Connector Harness details and connection diagram for HONDA AMAZE 2014
HTML-код
- Опубликовано: 4 окт 2024
- Video description of Woodman NEO GO Android Stereo connector harness details and connection diagram for HONDA AMAZE. Also has the tool requirements details to finish the installation.
Enjoy!
I have been searching for someone who can properly explain the wires. This is the Guy that did it for me. Thank You!
I tend to differ, how comes black is used as positive in this case than brown or red? The rest is very well explained.
I've searched video's for over 3 hours and you told me exactly what i needed to know thankyou😊
No One has made such a nice explaner video...sincere efforts..Big Thanks
Thanks for your words. Do check my other videos. Hope they will help someone or other to do things on their own!
Never before so clearly explained. Thanks so much
Bro...U explained clearly than any one....Superb.....Thanks for info....
thanks this is the only video that give me the correction i needed to connect my reverse cam.....
Thank you so much man ur very generous keep up🙂🙂🙂
This guy does a great job just saved me a lot of troubleshooting with the parking brake wire I could not get RUclips to playthrough my speakers now I can
a very good video 😎😎😎😎 I buy also and I am happy now because of you
Glad that I could help.
Best how to an what it goes to step by step I've seen .thanks buddy!
Thanks for your words.
You are Genius man thanks for the information that i tired to find 👍👍👍👍
Awesome video, saved me hours of stuffing around Thank You
Super. Extremely useful. Thanks a ton. Was able to do myself.
Thank you very much for providing such useful information.
Very nice detail video. If possible also make same video of operating unit.
See my other videos. It's there.
Very good video it helped to me install my woodman system thank you sir
You sure know the basics of electronics and have desire to do things on your own! Great start. Best wishes for a bright future.👍
Good video 📹 mate easy to understand 👍
2:23 Hi speakers do have polarity, in surround stereo system, polarity is very important to reproduce the original sound.
Thank you brother
Just a suggestion, speaker polarity does matter. Helpful video.
Thanks for the suggestion. 👍
Speaker +ve and -ve connections matter a lot.
If connected wrongly then speakers give distorted sound. Especially woofers.
Check speaker connections. Generally it is marked as + and -.
If connected wrongly then woofer coil will keep hitting the magnet causing knocking sound and this will damage the speaker coil.
If +ve and -ve are not marked on speakers then just connect the wires and check that when there is a beat sound speaker diafarm should move upwards and not towards the magnet.
Also make video on performance and feature of Woodman neo go
Broo 🔥🔥🔥🔥u r great
nice vid. big help. cheers
Hi, yes nice and clean explanation. Do you which one of these cables to connect to can high and can low?
Great information sir. And plz tel swift car wiring diagram all so same sir company fitted stereo .
You are awesome
Weldon it solved my problem 90 o/o
Glad it helped someone
I can only say, I love you.
Very informative video , thank u so much for this video👍🏻😍😍😍
Can u pls tell me “Reverse marked” wire where we will connect…? U said “reverse light of our vehicle” k.. u mean positive line of the reverse light right…?
Thanks for the comment. You guess that right. It needs to be connected to +12v line of reverse light in rear of the vehicle.
@@newonyoutube5535 thank u so much😍
Thanks 😊❤️
Nice presentation. However for speaker connection + and - really matters. This is very important to get the maximum fidelity and load for amplifier. Normally we cannot feel, but amplifier feel it. Another one I feel the ant wire is for self operated antenna ?
Ant wire is for vehicle antenna.
@@newonyoutube5535 I contacted one of manufacturer from china it is the triggering for the automatic antenna. For Radio you need antenna with coaxial cable. Both are different. The automatic antenna not equipped with every car
Really awesome bro👍 detailed explanation ..... ... Its very useful to me and i ask one more question. where to buy harness coupler and fascia pannel .plz share the buy link.., .. .
Please see the description box in my Function review video. There is a link for fascia. Banggood has some amazing products source .
But harness coupler where to buy
Try boodmo app or banggood.com
You will find everything there.
thanks bro
👍👍 super
What's Key1 & Key2 ?? Will it be connected to Both left & right of steering keys or somewhere else ?? Please clarify.
You are absolutely right! These are to be connected to steering controls.
Speaker doesn't have polarity??? Are you sure 😊. Also illumination terminal should connect to headlight switch so in night mode, the led will glow along with headlight.
I have installed this set in my car.Is there option to connect extra mic to this set. As this Bluetooth mic is not very responsive
There is an aux in Port . Check my unboxing video for connector details. Try connecting mic on aux in and see if it works. You can also have bluetooth mic and pair it with the unit.
Thank u
Welcome
Can I connect extra Mike to this Android player. As the build in mile is not very clear as on other side they cannot hear clearly
I have Big b car play stereo, but steering controls are not working properly...what may be reason?
I sent stereo for repair, and got it back, now after installation I am facing the same problem... customer service person saying try changing coupler socket....will it work? Plz guide
Your video is very helpful! Can you tell me please, if the car's socket has swc1, swc2 and swc ground, were do you connect the ground? Thanks!
These are the connections coming out from steering wheel controls?
Try connecting swc1 to key1,. Swc2 to key2 and swc ground to vehicle body.
Good luck
@@newonyoutube5535 Yes, the car's (Nissan Navara d40) steering weel control, has three wires, swc1, swc2 and ground wire, which is different from the "main" ground wire.
@@newonyoutube5535 thanks my friend. Is it all right if I put the two grounds, "main" ground and swc ground, together and then connect them to the stereo's ground wire?
@@legolas945 just measure the resistance between main ground and swc ground. If it very small or if there is continuity between these two grounds, you sure can tie these two together and then connect it to stereo ground or vehicle body or battary negative. Hope it work out for you.
The park pink wire is it not connected to ground?
Sir 1 confusion hai
Jo radio Aux antina hai to blue wire ant.say coupler ke blue wire ke sath jodna hai.
P ant waale wire ko radio couplor ke blue wire se jodana hai.
@@newonyoutube5535 thankyou
@@newonyoutube5535 colour kon sa hai wire ka coupler wire ka blue colour hai aur car ke kon se colour wire mai jodana hai
Honda Amaze car ka hai
@@princegt50 p ant
P.Ant, blue color
Hi can you send the video of nissan sunny 2014 model stearing wheel remote control wiring diagram
Is it also for neo2x?
Thanks for explaining. I have another terminal labelled as amp.. What is that used for.
It could be for the input to external amp. Power your unit up and put a 8 ohm speaker across ground and amp terminal. See if you get any sound.
Sir Then how to connect an amplifier ?
And also how to connect subwoofer ?
Please make video on creta new model
Sir I have wood man 3030.
Where have to connnect "REV"
wire ? In series or in parallel to reverse light. In // the wire will carry 12v & full amp to the unit , can the unit support 12v ?
I have not tried yet.
Connect it in parallel to the reverse light wire. In parallel only voltage remains same, current will be as per unit, full amp will not go in unit. Unit supports 12v.
@@newonyoutube5535 thanks.
Sir antenna wire..1 connect to power antenna (blue cable) the other one connect to witch wire Sir? Pleze help...
Antenna fitted in the car has two wire, one thicker coax cable with connector, plug this inside the antenna port of stereo. The secon blue wire from the radio antenna shall go to p-ant wire on stereo.
What about rear parking sensor .. where do we connect??
It doesn't have the connections for rear parking sensors.
pl put a video about car (not plug) connection diagram
Hello bro, My woodman android is provided with coupler, there is no free wires like yours, I don't know where to connect reverse cam triggering wire in harness wire
The reverse cam trigger wire is only required to be connected at the reverse light +I've terminal . At stereo side, no connections are required.
@@newonyoutube5535 oh okay, then how android stereo will switch on when reverse gear is engaged ? Only with VGA connection? It will be helpful if you show some video on wiring the reverse cam
@@ThirumalaiAPash you guess that right! The VGA signal generated by reverse cam has a peak voltage of 3 V , which get sensed by the stereo and it switches the Display to reverse cam mode.
@@newonyoutube5535 I tried this, but when I put gear in reverse, android still displayed home screen and not the video from cam
@@newonyoutube5535 if you make some video for connecting reverse camera with android stereo, it will be helpful for many whoever's looking for reference video
I would like to know how to make it so my android completely shuts off with an accessory. It was mentioned that I would need to piggyback off the cigarette lighter instead of using the wire harness...I'm so confused. I've programed my andriod to shut off and not go into sleep mode, but it won't work, it's still draining my battery.
If you want to make the Android go completely off, then connect the Red battery wire and Acc wire both to ignition switch wire. Now once you switch on the ignition, then only it will power up and would not drain the battery while ignition off. But to be fare it is not the right way. Each time Android will take lots of time to boot and initialise.
@@newonyoutube5535 Thank you! I should correct myself. I programmed my android to shut completely off when I shut the car off because it was in sleep mode and draining my battery, but for some reason it is still draining it. I'd rather it take more time booting than draining the battery. Thanks again!
Hye what about the car side how to identify wiring
Bhai etios he mere pass usme android toch laga us me mere jo rear speakers me sound km aarahi thi bass bhi nahi volume fat ta bhi tha or mai ek single speaker 🔊 bajau to bass sub kuch parfect aata tha to ye problem ka solution ?
You can try the following-
1- try adjusting the equalizer for balanced audio settings
2- try connecting one speaker at a time and see which settings work ok.
3- measure the resistance of every speaker and look for 4 ohm or 8 ohm. Anything less than that means speaker is bad.
4- check the speaker cone, if it is damaged, it will not sound good.
Good luck
Keypad light wire ?
thank
The car always comes with this wiring harness
I have mine done but the problem is when I turn off the car the radio still on
Good
Thanks
I connected only red yellow and black to check a stereo and its heating up. Do you know why?
If wires are heating up, it Could be anyone of followings-
1- the device has a dead short inside. Do not connect with power and get it rectified.
2- wire gauge is too thin, you may use a higher gauge wire with fuse( 2A) to check.
If stereo gets on and back plate of stereo is heating up, it is probably normal as audio amplifier ics generally heats up and that's why they are fastened with heat sink (the back cover).
@newonyoutube please post new videos. We are waiting.
Where to connect the Bluetooth mic
In my music stereo there is no acc (red) wire. What can I do..... Please help me....
Seems your stereo has physical on off button in front panel. Confirm it. If it is so, you don't need to connect the acc . Your stereo will be on and off by the switch on the panel rather than ignition key.
@@newonyoutube5535 Yes my stereo has on off button in front panel.
@@superstartuhin3228 there you go.
When I cal from Woodman by Bluetooth sound is not going well what to do...
You can try connecting mic on aux port. See unboxing video for connector details.
Acc can i use to connect for external mic
Blutooth mic can be connected.
Or you can try aux port.
How to set this in home
You need a 12 v 4 amp power supply and 4 speakers. Connection remains the same.
How much voltage required to operate ....12 or 24 ??
12 volts DC
Thankyou so much...
One more question..
Jaise ki 12 volt ki battery me 48 amp tak current hota hai or mujhe kisi ne bataya tha ke stereo me 2 to 5 amp current chahiye hoya hai .. plzz ye cnfussion clear kr dijiye
@@thepearlofocean7934 consider the battery to be a ocean having 48 drops of water 12 gram each . Your stereo needs only 2 drops of water 12 grams each per hrs. So stereo will work 24 hrs taking 2 drops each hr. In short it will easily work. No issues...
Sir I have installed aftermarket android in my ford ecosport 2017 it's working nice but I wish my inbuilt music system should work too. Atleast it should illuminate to look good at night. Is it possible sir? Thanks.
Sure. You can connect 12 v , acc and ground wire to start the illumination. If you can connect two tweeters on the speaker out, it will give little sound as well.
@@newonyoutube5535 sir a little query do I need illumination wire to connect as you explained above ? and which colour ground wire is. Thanks
I mean illumination wire too with 12v acc?
@@ap42869 illumination wire on Android or illumination wire on your old stereo?
@@newonyoutube5535 sir I mean exact which connection to use to just illuminate old stereo lighting Thank Sir.
ILL should be connected to light switch.
Sir mere pass eska conector nahi he to kya kare
It is available on boodmo and on Amazon.
In home use if we use 12 0 (3amp) transform use
Yes it should work.
Which amp is best (3 or 5 or 7) in 12 volt
@@vinothkumar.i5471 5 amp is good enough. Take 12 V 5 amp adaptor having a stable DC output.
@@newonyoutube5535 thanks 😊 for great information
Hii
Date time reset issue
Date time not being saved
Check the +12 v and acc lines. They both should have +12 v with respect to chesis when ignition key is turn on.
Bro plz help me