This is where I sae this video. I couldn't remember who did it. I saw this a few years ago and have made countless of these. They are easy to make and handy for light loads and you don't have to worry about losing them. I usually take it a step farther and harden the spring coil after it's made to keep it from bending out of shape and guve it a bit more tension
That’s so cool. I would make one mod to it. Without welding the wires at the end you could keep them together with a tiny ranger band. Easier to melt rubber than to weld copper.
Wow...I never imagine how easy is to bend a wire hanger with just 2 pieces of tools that I have around my house. Thank you for share your creativity...I love it👍👍.
Golden hands, for sure. But pliers for this job should not be toothed and as an idea, the spiral steel key hanger should go directly through a carabiner spiral, without the mediator you made. Keep up the good work.
Muito eficiente e mto interesante o método de trabalho. Certa vez tive a ideia de fazer este modelo mas apanhei muito pra conseguir fazer e não ficou bem simétrico. Ferramenta básica + criatividade é tudo pra se ter eficiência!
Hey bro...You know what they say? "Build a better Mouse-trap" and the world will beat a path to your door! Please see what you can come up with in the area of a " better "mouse trap and a better Rat-trap...God bless!
I made a carabiner out of a wire coat hanger, a couple sockets, and a pair of pliers. ...and a bench vice. And a hacksaw. Cool video and concept though.
ahh, the glorious upcycle of coat hanger wire. Sadly, wire coathangers are somewhat scarce where I live unless you go to a dry cleaner on a frequent basis.
If you have a uniform supply company near you (Cintas, Unifirst, ...), you can ask them or one of their truck drivers for a few. I did once several years ago and got a box with 300 for $1.
This is cool, i just don't like the top two open ends.. would it even be possible to start with it folded or something to have no "loose" ends.. or twist them and fold over idk
@@masterfab23 Don't forget about the ruler and Sharpie he used in the beginning, big ticket items there. Not to mention the house and car you'd have to buy to necessitate something to hold your keys.
Or you can go to the hardware store and get one for a dollar. By the way, just because you bent a piece of metal into the shape of a spring does not make it a spring nor will it function as a spring... unless you just did that for the looks.
Great work. Really appreciate the natural sounds as opposed to music.
I have never seen wire bending techniques like shown here. Seems so simple. Really effective and mostly perfect bends. Thanks.
Thank you for enlightening me that I had a huge stockpile of mandrels at my disposal.
Best ten minutes all week!
And the stuff I learned from that ten minutes will be useful for the rest of my life!
The things you create are amazing. It's just from a garment. I made it with a stainless steel wire. Thank you. I love it
what wire number is it
Very nice! That’s the most useful thing I have ever seen made from a coat hanger! Very nice work! 😎👍🏻
I like the steel wire craftsmanship very much, very beautiful.
This is where I sae this video. I couldn't remember who did it. I saw this a few years ago and have made countless of these. They are easy to make and handy for light loads and you don't have to worry about losing them. I usually take it a step farther and harden the spring coil after it's made to keep it from bending out of shape and guve it a bit more tension
Harden? Please elaborate
Nicely done! Thank you for posting/sharing!
That’s so cool. I would make one mod to it. Without welding the wires at the end you could keep them together with a tiny ranger band. Easier to melt rubber than to weld copper.
Wow...I never imagine how easy is to bend a wire hanger with just 2 pieces of tools that I have around my house. Thank you for share your creativity...I love it👍👍.
Golden hands, for sure. But pliers for this job should not be toothed and as an idea, the spiral steel key hanger should go directly through a carabiner spiral, without the mediator you made. Keep up the good work.
I enjoyed the silence except for the sound of the tools. Neat!
Awesome video. Always been curious about these carabiners, nice to see it done.
Muito eficiente e mto interesante o método de trabalho. Certa vez tive a ideia de fazer este modelo mas apanhei muito pra conseguir fazer e não ficou bem simétrico. Ferramenta básica + criatividade é tudo pra se ter eficiência!
Wonderful 10 mins, will make my own, thanks..
Excellent Video, Thank-you for sharing!!!
great video i have alot if hangers gifts for christmas
Brilliant idea using a rachet set.
That's for sure. Never thought of it.
Hey bro...You know what they say? "Build a better Mouse-trap" and the world will beat a path to your door! Please see what you can come up with in the area of a " better "mouse trap and a better Rat-trap...God bless!
very good job
very nice and simple, i like this.
Отличная работа. 👍
Awesome! And thank you
Muito bom,o mais prático para fazer , bem simples como eu procurava
I made a carabiner out of a wire coat hanger, a couple sockets, and a pair of pliers.
...and a bench vice. And a hacksaw.
Cool video and concept though.
ahh, the glorious upcycle of coat hanger wire. Sadly, wire coathangers are somewhat scarce where I live unless you go to a dry cleaner on a frequent basis.
If you have a uniform supply company near you (Cintas, Unifirst, ...), you can ask them or one of their truck drivers for a few. I did once several years ago and got a box with 300 for $1.
very nice.. i usually build myself some sort of carabiners like that one .. but with a slightly different design ... very helpful thanks
A moment of silence for the hanger that lost its life for this video......
Awesome hack sir
"NO! More! WIRE! HANGERS! EVAAARRRRR!"
Thumbs up. Well done 👍
Obrigado pelo vídeo... me ajudou muito
This is cool, i just don't like the top two open ends.. would it even be possible to start with it folded or something to have no "loose" ends.. or twist them and fold over idk
Chris Sproles I will make a new one with your suggestions. Thanks!
@@First_Class_Amateur can't wait to see what you come up with.
Heat shrink?
@@timshin8620 good idea
Perhaps just brazing the two ends together would do the trick .. would also look kinda neat. Cool project!
How about making the clip section that you did at the end...a bit longer, solder them together then cut to length?
Las puntas del seguro No deben dejarse así... Lo ideal sería soldar las 2 puntas, o hacer el remate en el resorte...
Insulation hangers work well.
Muito bom!qual é o comprimento desse arame , obrigado.
That's pretty cool
Nice
Nice work...THANKS for Sharing!
QUESTION: What gauge Hanger is that and where did you get it?...
Yikes, I don’t remember. I got theses hangers from amazon. I just bought whatever pack that came up. Brent
Do you get your clothes dry cleaned? Or know anyone that does? When you get them, they are on wire hangers.
Nice & useful, what size sockets you used
Can you even get wire coat hangers anymore.......
Galing ng content mo, maipagmamalaki... Keepitipop the good work 😀
Deveria passar as medicações não achas ?
How does it work today?
Muito bom, mas pideria ter mais uma pequena dobra e não terminar em pontas vivas com foi feito.
what is the name of that wire and where do i get it
En si la idea es buena solo que yo en la. Parte donde engancha no le hubiera cortado al contrario le dejaba y doblada para que quede mas sujeta
What are the measurements. Cant see it clearly in the video
Excellent.!!!
By the way you have a new subscriber!!😁.
Хорошая работа! ЛАЙК!!! 👏
чо ?
Could you use those for climbing?
Are you serious?
Steve Ibershof Nope, suicidal... ;-)
God no.
Nice hack, Mr. Hack Master 😎😎
Loved the video very informative
HOW MANY INCHES ?
Very good
what size sockets did you use or does it make a difference?
I think it was 13mm and 8mm, but it's really up to you.
FIRST CLASS AMATEUR thx nice job by the way!
Question the bend where you go around the socket twice... how far Dow from the big loop do you go? Looks like3-4 inch?
Mate, thumbs up!! I Really liked this.
Awesome way to save 75 cents
Thanks for sharing
I new a person that made this and gave it to me
You know, a wire gate carabiner only costs around $10. Just saying.
Wire hangers are rare now
Fine job . and save $
Lol...What size are the sockets...Please
7MM and 14mm
Fantastic!!!
Hangers have brittle steel & not springy enough to make a clip like that.
seems to work tho
The spring is in the loops at the bottom and not in the bending of the wire.
Necesito comprar las pinzas la prensa y el gancho de ropa y manos a la obra.😆
Catchy.
если упасть ещё на этот карабин раскроется и воткнётся в тело 😅
To much money for tools to make this....dollarama sells some heavy duty ones for pretty cheap but I appreciate the effort
If you don't have 2 pairs of pliers a 10mm and a 12mm deep socket you need to reevaluate your life fam.
@@masterfab23 Don't forget about the ruler and Sharpie he used in the beginning, big ticket items there. Not to mention the house and car you'd have to buy to necessitate something to hold your keys.
@@Esox79 the 25 dollhair harbor freight vice is gonna break da bank
Sometimes it's fun to make something just because you can . Better than not doing anything and just sitting on your keyster watching RUclips videos
The dollar store also sells some cheap tools as well. Then you would have them for other things.
Dale in Canada
Good video.
Amigo buenos días me darías la medidas por favor saludos desde la Ciudad de México
Side q son 13mm y 8 mm
Awesome
good
Make a swivel please
bravooooo
Ok ok beautiful
I made it 6 year ago
👏🏽👏🏽
Es el llavero más inseguro que he visto.
👍
сломал вешалку, стоимостью с готовый карабин)
Ну тупыыыые)))
Interesting. Let us know when you lose your keys.
I make it
Will it take my weight? Can you show me how to make a fertiliser bomb, there's a couple of wind turbines I need to blow up?
I said no more wire hangers! LoL
How to lose your keys in one day of hard work
Unless you maybe heat treated it?
NO MAMES MEJOR COMPRATE UNO, VALEN 2.50 USA...
Or you can go to the hardware store and get one for a dollar. By the way, just because you bent a piece of metal into the shape of a spring does not make it a spring nor will it function as a spring... unless you just did that for the looks.
Не надёжно. Может отстегнуться.
Hi friend, if you don't speak, you can't understand.
unsafe
It will rust by the time
Are u even human
E🇵🇬.,
You spent half-hour or hour and all you got is trash that worse than 50-cent chinese carabiner. Why?!
👍