Yes, you can make do with the wrong fastener or tool, but it is always better to have the best tool for the job. I never regret getting the proper tool.
Пир новаторства и наставничества! Накрыть банку с краской пищевой плёнкой - вот мой фаворит на премию "Фейспалм" в номинации "Сантехник Афоня втирает молодым за культуру производства". :)))
The thing with the wrench. I would probably just use my hammer. It already has this thing on the other end for pulling out nails. Try it. It works even better than destroying a perfectly good wrench.
there are more than a few of these that are down right clever. Then there are some that.... The tools used to make the "Handyman Invention" cost more than the invention itself, and if you have the tool to make it, you should already have at least 2 of the tool you're trying to replace. (or in the case of the wire strippers, a knife already in your pocket)
There are few that that known, like drilling wooden plank with plank underneath, but rest of "inventions" is downright awful. Why do anyone would need to attach box cutter to a plank if you can use it right away without any issues.
What's the point of the first one? The second one, can save time, money, and materials and just buy a pin remover, or use a screwdriver as many have done before. Then even further on it, just buy a paint mixer. Third one, cool, you put a cross cut in a section of bolt to screw it into some soft wood... that does nothing but have a chunk of metal in the middle of a piece of soft wood. Fourth one, yay! You bolted some white to some soft wood so that you have some wire bolted to some soft wood to yank on. Here's a "hack," tie some string to the head of a broom so you have some string tied to the head of a broom to yank on. And on, and on, and on, and... use a plastic bottle on your indoor faucet to fill the bucket? Yeah, having a bottle with water inside left hanging on your faucet is much more practical than buying a faucet that has a nozzle on a hose, screwing a hose to your faucet if you don't have that but have a threaded faucet, or, you know, using an outdoor faucet, your shower head, or your bath faucet. 'Here, law nails on a board, burn the board, and you fixed the problem with your AC unit!' What is that "hack" even supposed to be used for? The nail through cardboard, for people that lack the mental capacity to hold a nail. Just just using an angle grinder to turn a wrench into a limited range cat paw for people too stupid to use the claws on their hammer or cat paw.
Funny I just came into the comments to say that for once, for my own home shop, there were one or two that gave me some ideas… lol… none of them as-is, but a few good source ideas… 😂
I don't know. Cutting up plastic bottles to use them as cheap disposable funnels isn't that dumb if you need to funnel things like paint or glue that would effectively destroy the funnel (or be too much effort to clean off the funnel). Not sure how often you actually need to funnel such liquids, though.
Lol I bet all you guys, when you don't have the right tools you just stand around with your hands in your pockets, your useless without the proper tools lol
@@Waldee84 Ive waited 7:40 and have so far seen ONE almost useful thing, not a single one of these are "clever" their are downright obvious or just stupid.
О, сколько нам открытий чудных готовит интернета дух... И Ютюба иже с ним... Не перестаю восхищаться полётом фантазии мастеров-фломастеров! Хотя, конечно, некоторые идеи очень даже ничего. Например, как на банку с краской напялить обрезанную бутылку.
I need to cut this wood but all I have is this saw blade amd a spare door hinge and some screws and bolts. Wonder how I can cut through this wood? 🤔😆 I'd say about 90% of these are really reaching lol. And there a much more affective and simple ways of accomplishing what he accomplished. But it made for a interesting and humorous video lol.
Now i know how to cut up all my snap on wrenches so i can pull nails....that damn hammer is just outdated!...and dad gummit i knew there was a better way than them extremely cheap and easy clothes pin!!....this stuff is hilarious!
In all those videos I keep asking myself: what if I don't have an angle grinder? And in many of those, the angle grinder you need probably costs more than the correct tool you should be using instead of those hacks.
@@michaelunderwood5138 You mean more affordable options that are made to directly address a problem? These things require you to use tools to alter tools to change their given purpose...why?
A true handy man will have the correct tools to make the job easierand faster. Creativity is a staple in a hanymans arsenal. No matter what he will build or get what he needs if he doesn't have it. In a pinch you should never modify how a tool is designed to work it could cause damage to the job or could cause injury to persons or operator.
@@kdmebrmmg625 а мне зашло приспособление для заточки сверел из болгарки и болта с приваренной к нему гайкой.Надеюсь,оно зашло автору.Сверло.Точнее в автора.На вид всё кажется гениально)))
Take into account that all these should be done only in a pinch when you don't have the proper tools to get the job done some of these are down right redundant like the nut and bolt parts. 25 dollar set of wrenches.
Whenever you feel that you have to spend thousands of dollars to get the job done, remember the creativity and ingenuity you seen in this video and remember, it's 2022 and no one knows how the pyramids of Egypt were built, yet they were built 4,500 years ago. To the creators of this video, keep up the good work!
С паяльником вообще пиз...ц, таким успехом можно в туалете прибить палку, намотать на нее бумагу, и вытирать жопу не пачкая руки) а сделав это устройство на колесе от велосипеда, можно сделать на несколько использований
Personally I find it more cost-effective to just buy the purpose-built tool or whatever, but if I ever wanted to stop making money as a contractor running my own business and just do meth all day, I'm sure I'd LOVE all of these solutions to problems I don't have or can solve easier in a lot less time 🤣🤣🤣
Chain Wingnut tool was best. Great for damaged heads. Plastic bottle over pain can seal, runner up. Together they are good enough to forgive that pizza cutter box opening. Lets just never speak of it again. lol
Some of these are really neat. Some of these are ridiculous. And it seems like, as the video went on, the neat ones stayed the same level of neat, while the ridiculous ones got more ridiculous. I'd be concerned, but I'm pretty sure it was on purpose.
Some very clever ideas, some more trouble than buying a ready made product.
Yes, you can make do with the wrong fastener or tool, but it is always better to have the best tool for the job. I never regret getting the proper tool.
Есть хорошие идеи, но большинство абсолютно бесполезных идей
Это не идеи это смекалка. Когда нужно что-то сделать, но нечем, а времени ехать в магазин нет.
Сам так часто работаю.
Homeowner ideas in a pinch..
Теперь я знаю, как выглядит творческий пОнОс...
0ⁿ
Booo
Ok
Забивать гвоздь держа картоном норм. Пальцы целые
De rospipriot isbnitrikrem krestindret arkroprotet!!! Ok???
Lucky you. Make shift tools are strictly verboten in the shops where I’ve worked.
Пир новаторства и наставничества! Накрыть банку с краской пищевой плёнкой - вот мой фаворит на премию "Фейспалм" в номинации "Сантехник Афоня втирает молодым за культуру производства".
:)))
The thing with the wrench. I would probably just use my hammer. It already has this thing on the other end for pulling out nails. Try it. It works even better than destroying a perfectly good wrench.
Вот не понял ваще, зачем болт без шляпы было в бревно тасовать, и и на деревяке гвозди палить,
Гвозди на деревяшке, типо узор. Про болт тоже не догнал
A nice range of "that's useful", to "maybe in a pinch", to "why on earth?". Mostly the last.
My take away from this video is:
You don't always have to hammer the nail into a board. You can also hammer the board onto a nail!
funk FPV needs to review these
🙄😳 jamás entenderé ese afán de algunos hombres de echar a perder algo útil para arreglar otra cosa
походу это родственник мистера ссани🤣
По ходу ты прав.Как минимум брат по разуму, которого, по всей видимости нет.
there are more than a few of these that are down right clever. Then there are some that.... The tools used to make the "Handyman Invention" cost more than the invention itself, and if you have the tool to make it, you should already have at least 2 of the tool you're trying to replace. (or in the case of the wire strippers, a knife already in your pocket)
There are few that that known, like drilling wooden plank with plank underneath, but rest of "inventions" is downright awful. Why do anyone would need to attach box cutter to a plank if you can use it right away without any issues.
Ok SOME of these are actually pretty smart
Terima kasih, semakin menambah wawasan👍👍👍
Everything on here they make an actual inexpencive tool for that job that will work better than what you made!
If I saw somebody on my crew trying to use half these tricks, I would fire them. Most of these are pointless.
Вероятно Ваша команда делает работу для которой эти трюки бессмысленны. Другой команде для работы эти трюки подойдут.
That was dope..I have this feeling to go build something now..
What's the point of the first one?
The second one, can save time, money, and materials and just buy a pin remover, or use a screwdriver as many have done before. Then even further on it, just buy a paint mixer.
Third one, cool, you put a cross cut in a section of bolt to screw it into some soft wood... that does nothing but have a chunk of metal in the middle of a piece of soft wood.
Fourth one, yay! You bolted some white to some soft wood so that you have some wire bolted to some soft wood to yank on. Here's a "hack," tie some string to the head of a broom so you have some string tied to the head of a broom to yank on.
And on, and on, and on, and... use a plastic bottle on your indoor faucet to fill the bucket? Yeah, having a bottle with water inside left hanging on your faucet is much more practical than buying a faucet that has a nozzle on a hose, screwing a hose to your faucet if you don't have that but have a threaded faucet, or, you know, using an outdoor faucet, your shower head, or your bath faucet.
'Here, law nails on a board, burn the board, and you fixed the problem with your AC unit!' What is that "hack" even supposed to be used for?
The nail through cardboard, for people that lack the mental capacity to hold a nail. Just just using an angle grinder to turn a wrench into a limited range cat paw for people too stupid to use the claws on their hammer or cat paw.
Ролик наводит на мысль - как часто выбор человеческий, балансирует между мудростью и запредельной глупостью.
Он просто совсем почти не конченый
Hay if it's stupid and it works was it ever really stupid?
@@demonlordotrt754 эй, если ты умеешь писать и читать - это не говорит о том, что ты умный.
ИМХО
@@demonlordotrt754 тогда заточки сверло с помощью идеи в данном видео.Надеюсь, останешься цел.А если нет, тоже неплохо)))
As a professional handyman with a successful handyman business, it is safe to say that I would use zero of these tips.
Exactly. I'm not handyman but I agree.
Funny I just came into the comments to say that for once, for my own home shop, there were one or two that gave me some ideas… lol… none of them as-is, but a few good source ideas… 😂
As an amateur handyman. I have to completely agree.
I don't know. Cutting up plastic bottles to use them as cheap disposable funnels isn't that dumb if you need to funnel things like paint or glue that would effectively destroy the funnel (or be too much effort to clean off the funnel). Not sure how often you actually need to funnel such liquids, though.
Lol I bet all you guys, when you don't have the right tools you just stand around with your hands in your pockets, your useless without the proper tools lol
Do you know that there are ready made bits of steel with threads and screwdriver slots?
I think they call them screws.
I survived almost 3 minutes watching this. And now you owe me 5 minutes of my life back.
I've waited 5:30 hoping for one reasonable/useful thing but I gave up.
@@Waldee84 Ive waited 7:40 and have so far seen ONE almost useful thing, not a single one of these are "clever" their are downright obvious or just stupid.
even after 4mins, just bad or dumb ideas, or common things any idiot could think of
I see the "God's gifts" to everything are here.
Some of these are like "do you want to do this? Just do the first thing that comes to mind" as expected
Ещё один ломатель хорошего инструмента 😬
Не показывайте Доктору
К доктору его!
.
Amazing work ❣️
Have a great day 😊
Глядя на это с ужасом понимаешь как деградирует человечество. 🤦♂️ Радует то, что не все настолько дятлы.
For once one of these “shop hacks” videos had a couple hacks that at least gave me an idea for something related…
HOW BLOODY MARVELOUS IS THAT?!?!?!?!
BRAVO!!
You’re doing great! You’ve done a great job!
2:02 I could have used this one like a week ago!!! OMG!!! THX!!! 🤣
I hate seeing someone turn a twenty dollar tool into a five dollar tool.
Доктору не показывайте, его пукан такого не вывезет
Искал такой комментарий. Нашёл. Лойс
Поздно он уже увидел
Мне особенно понравился гаечный ключ 6:20 🤣
I like the bung-hole mixer ( paint mixer ) made out of the shaft of a long bolt , several taps , and the bicycle chain .
I just ❤ ingenuity! 👏🏼😎
О, сколько нам открытий чудных готовит интернета дух...
И Ютюба иже с ним...
Не перестаю восхищаться полётом фантазии мастеров-фломастеров!
Хотя, конечно, некоторые идеи очень даже ничего.
Например, как на банку с краской напялить обрезанную бутылку.
Great video
I need to cut this wood but all I have is this saw blade amd a spare door hinge and some screws and bolts. Wonder how I can cut through this wood? 🤔😆 I'd say about 90% of these are really reaching lol. And there a much more affective and simple ways of accomplishing what he accomplished. But it made for a interesting and humorous video lol.
Que onda con la traducción? Hay porfa
Совсем неудивительно, что у этих людей не хватает ума на поход в магазин))
Но, при всём этом, такие каналы имеют почти по миллиону подписчиков:))) С этим миром явно что то не то...
@@TieraRoot Welcome to the age of ignorance. We're little more than 5,000 years in, a little less than 427,000 to go.
They’ve never had to improvise and adapt. They’ve always had everything handed to them on a silver platter.
Its cool but its not practical since buying the tools from a hardware store is much better.
Безумец в мастерской !
The father I've never had!
That trick with the concrete also works with my wife's vibrator
Genial. Da ist für jeden etwas dabei.
Can't imagine what this guys house must look like
Прищепка просто супер! Долго думал над этой конструкцией гений?
Ибо нех
Автодрочилка ему нужна
Now i know how to cut up all my snap on wrenches so i can pull nails....that damn hammer is just outdated!...and dad gummit i knew there was a better way than them extremely cheap and easy clothes pin!!....this stuff is hilarious!
The coolest thing for me is the foam bottle 👍👍
Thx
Great stuff , but recommend turning off sound
In all those videos I keep asking myself: what if I don't have an angle grinder? And in many of those, the angle grinder you need probably costs more than the correct tool you should be using instead of those hacks.
Creativity is the staple of a true handymans skills. Certainly i could assume that there are affordable options available.
@@michaelunderwood5138 You mean more affordable options that are made to directly address a problem? These things require you to use tools to alter tools to change their given purpose...why?
A true handy man will have the correct tools to make the job easierand faster. Creativity is a staple in a hanymans arsenal. No matter what he will build or get what he needs if he doesn't have it. In a pinch you should never modify how a tool is designed to work it could cause damage to the job or could cause injury to persons or operator.
For everything I've seen in this video a patented tool or part already exists
@@dosatkeysbeats And those probably cost less than the angle grinder you need to to all of these hacks.
Самодельщики соревнуются ,кто придумает идею поупоротей.
Молодцы ребята.
Да да да!!! Типо рекламы Инстаграм .негритянки с зубами как у коней и протэзом со стращами. Как это все паяет.....,,?;!!!
Genial
Muy chulo
Gracias
The chain being used to make half circles made me laugh. I mean, really? How is that anything.....
It’s great and very useful
I question the safety of the angle grinder stand
Cool but I love how no walk through or explaining
Tendría que inventar algo para no arruinar la morza con la amoladora.👍👍👍
8:29 вот реально годная вешь👍👍
Опять котовая гигиена...
All you need is an angle grinder!
Da ist schöner Fusch dabei! :D
GENIAIS SHOW PARABÉNS
Порезать гаечный ключь для тогл что бы доставать гвозди 🤓
Good lord. Funk could have a field day with this video. I just saw this dude "fix" threads with styrofoam.
Brilliant invention amazing keep up the wonderful work.
cám ơn bạn đã chia sẻ nhé🥰🥰🥰
Какой интересной жизнью живёт автор ! Он наверное за место душевой лейки пользуется садовой "ведёрной"
Да
ахах тут надеть шланг на трубу очень умный лайфхак ахха вообще о чем можно говорить?
Except for the water filling in bucket, rest ideas are wastage of resouces that you have
@@kdmebrmmg625 а мне зашло приспособление для заточки сверел из болгарки и болта с приваренной к нему гайкой.Надеюсь,оно зашло автору.Сверло.Точнее в автора.На вид всё кажется гениально)))
Zzzzz,
All these crazy ideas and he uses a pizza cutter to open a box lmao
Terrific video! Thanks for sharing something so useful! 🙏👍👍✌️🇬🇧
Using a disc grinder as a pencil sharpener wtf. This was interesting but it’s way safer and cheaper to just get the tools you need.
Very nice, good luck and continued success, my friend
Im soo excited to try some of this
Ótima Invenção
あ、これは良い！と思ってもあっという間に通り過ぎてしまう。
次から次と、たくさん紹介されるので、疲れる。
Take into account that all these should be done only in a pinch when you don't have the proper tools to get the job done some of these are down right redundant like the nut and bolt parts. 25 dollar set of wrenches.
This type of video unblocks zones in my brain that I didn't know. I always have my original ideas later.
MacGyver is this you ?........
Every one of these is the harder, stupider, more expensive way to get the job done👍
You are too.
came here for the thumbnail, could not find it
Whenever you feel that you have to spend thousands of dollars to get the job done, remember the creativity and ingenuity you seen in this video and remember, it's 2022 and no one knows how the pyramids of Egypt were built, yet they were built 4,500 years ago. To the creators of this video, keep up the good work!
Unir 2 lineas de acero inoxidable con dos tuercas es inútil ya que a la hora de aplastar las tuercas tienden a partirse 😞
Top !
У меня создалось впечатления, что идеи тебе приходят быстрее, чем ты их успеваешь снять на камеру, даже если они бесполезные.
С паяльником вообще пиз...ц, таким успехом можно в туалете прибить палку, намотать на нее бумагу, и вытирать жопу не пачкая руки) а сделав это устройство на колесе от велосипеда, можно сделать на несколько использований
снимите ролик
Personally I find it more cost-effective to just buy the purpose-built tool or whatever, but if I ever wanted to stop making money as a contractor running my own business and just do meth all day, I'm sure I'd LOVE all of these solutions to problems I don't have or can solve easier in a lot less time 🤣🤣🤣
Anyone else cringe when he cut into those new linemen pliers?!
Лучше бы ключ просто почистил)
Chain Wingnut tool was best. Great for damaged heads. Plastic bottle over pain can seal, runner up. Together they are good enough to forgive that pizza cutter box opening. Lets just never speak of it again. lol
How to use expensive tools to make junky replacements for inexpensive tools.
1:54-That's pretty much muscle memory for most men, amiright?🤫
9:32 There’s these things called fingers.
Le saca la punta al lápiz con la amoladora que animal jaja
Половина из показанного даже мастерам раз в жизни пригодится, а какгда понадобится проще купить и не возится
I can't wait to show off at work tomorrow. I am leaving my box-cutter at home and bringing a pizza-cutter instead!
These hacks are just soo unnecessary 😂
Gostei muito das dicas mano..ganhou um escrito👍
7 7 7
Some of these are really neat. Some of these are ridiculous. And it seems like, as the video went on, the neat ones stayed the same level of neat, while the ridiculous ones got more ridiculous. I'd be concerned, but I'm pretty sure it was on purpose.
Самоделка полная...
Мегаляхоми попахивает...
Uu
@@realhashani3500 UwU
Yuk ☕👉👉👉