A Layman's Guide to Minor VCR Repair
HTML-код
- Опубликовано: 6 сен 2024
- Covers the most common repair procedures on many 1980s VCRs. Not exactly a high-budget production (looks like it was recorded, edited, and distributed on VHS, with plenty of generational quality loss), but maybe it will help someone...
It is reallly good that people share technical school videos on the internet
I love the idea of someone in 1984 trying to repair their VCR, getting this on VHS, just to realise they can't watch it lol
There wasn't really any alternative to distributing a video in the 80s (besides Betamax which most people didn't have). But yeah, it's ironic that a guide to fix a VCR requires a VCR to watch.
Thank you very much for posting this. This actually helped me repair my 1985 Panasonic VCR that was locking up and chewing tapes. Getting to the idler would have been a mystery to me if it was not for 10:20 to 12:45. I recently bought a 1984/1985 Sears (Hitachi) VCR that I will need to service completely. The unit is similar to the 23:35 model but it is slightly more modern with no PC board at the bottom. It has a cable ready tuner and Linear Dolby Stereo.
Was looking to repair a VCR I picked up and whaddya know! It’s the same one he’s repairing in this video!
Thank you! Some of this repairs I've had to learn by myself. fortunately at the electronic store here in Strasbourg I was able to contact a retired repair guy who worked on TVs and VCRs in the 80s. unfortunately most of the ppl who could also help are long dead.
I bet this guy never expected that people would 1 day be watching this on a phone ..m
I wonder if there is anyone that has Volumes Two and Three of this as these are very helpful guides for my growing 1980s VCR collection. Calling Oddity Archive.
thats right, jay.
Sometimes defective tapes will wreck a VCR so if it messed up a previously working vcr do not try it in a second one. That can cause it to wreck 2nd VCr also and any other tapes put into them after.
mr plinkett liked this video..
That Incredible Hulk had a brother who had much more patience and enjoyed the quiet and solitary activity of electronics repair.... Who knew?!
And the recording's colors are messed up, it looks like comeone tried to record a PAL signal in NTSC. Swapping the R and G values could solve the problem.
Great how to video...........Thanks much!
The vcr repair is on vhs
"Ok thanks for the tape but my vcr is broken"
Oh boy can’t wait to watch this repair video! Wait…my vcr is broken….shiiiiiiiiit
I bet he has no trousers on, under that desk lol. 2:09
What would cause a Symphonic SC313B combo TV/VCR to shut down after 5-10 seconds of being turned on. If I put a tape in it will play the tape no problems. As soon as I hit the Stop button 5-10 secs it will turn off the TV. The only trick I found is if I disconnect the power cord and wait for lets say 30 mins, then plug the cord back in with a tape in it and hold the tape from coming out it will stay on. As soon as I eject the tape the TV shuts off or if I just manually shut off the TV then turn it back on it will shut off in 5-10 seconds.
I have to repeat the process of unplugging the TV for some period of time then power up with a tape in it and hold it so it won't come out then the TV will work again.
Any clues what the fix is?
I cant be the only person who see's the irony of producing a "How to fix your broken VCR that wont play tapes" tape...still very helpful though...I have a couple of guide books but there very dry and dont offer a lot in the way of Illustrations...
What else would they put it on tho, laserdisc? XD
I have two vhs jvc version HR-D721EN and both play with sound but black image, I already cleaned the heads and it's still the same, if I fast-forward there you can see the rain but then it's black with the play logo. any idea how to repair it or a circuit that is wrong. Thank you
mend it mark
Sony Betamax sl-hf400 the video drum and the capstan motor with the pinch roller doesn't rotate at all but rewind ffwd eject everything functions well any idea about the problem ?Plz help thanks a lot
Hi I need a Panasonic VCR parts any idea or if you have Please advice
hmmm. Nope I'm Not gonna try. brand new out the box at downtown los angeles $39 repairman will charge $$$$ and parts will be $$$$ I'll still give you KUDOS for the video and you uploading. i Like, OLE!
I don't know where you could buy a brand new VCR, the only remaining company stopped making them 3 years ago. $39 would be very cheap for a brand new(maybe old stock?) VCR, a decent one certainly cost more than that when they were popular.
When the original video was made, some VCRs were very expensive.
Anyway, it's nice to get VCRs working again :), especially good models.
Who still services these machines? I want to ship it to someone. it plays 5 seconds and stops
Send it to me so I Iook at it. I fixed a similar problem
@@mecedes4000 where are you at?
Hello. I have a lg dvd-vhs combo vcr. The first 10-15 minutes show bad. Then it gets better. I tried many different cassettes same problem. I wonder what the problem might be. Sorry google translation
I also have an LG DVD/ VCR combo, and after a long period out of use, it would really struggle with tapes, picture quality was shocking, sound was also terrible. I took the covers off, and cleaned the VCR heads by hand with methylated sprits, and tested. (Watch a RUclips video on how to do this, because getting methylated spirits in the wrong place can cause damage). Sadly it did chew a part of one tape, so test it with a tape you’re not too concerned about, but after that it settled down and has worked reliably ever since.
Where are we supposed to get these idlers and belts
3:50 "This is a Fisher idler assembly."
(Yea, don't we all know THAT). Those machines were awful.
My mom's vcr has _zero_ cable disconnects for the tape mechanism, making servicing a BITCH.
God i hate that thing.
into about 18 minutes of the video anyone notice that gold ring? Highly conductive.
Does anyone know if any of the VCR repair guys here on RUclips will answer some repair questions? I know time is valuable, so I would try to make it as quick as possible. I'm trying to learn a few things about repairing these beasts. I have about 15 of them and want to avoid having to trash them. They need to live on!...lol.
Try asking 12voltvids. He is a former Sony service technician and has done several VCR repair videos.
He actually messaged me and said he would help if he could and we've spoken a few times. But I think he's too busy to answer all of the questions I have. I'm still accumulating VCRs and camcorders, so the questions are piling up. I'd really like to know where to get parts for one thing. I need a power supply for a JVC VCR and a mode switch (I think is what it's called) for a Samsung CC. And also some ribbon cables for a few things. It's kinda overwhelming me!...lol. Thanks for the tip VWestlife.
@Camcorder Tests & More;
You have the Second part of this training guide?
No.
What I can find, there are 3 parts to this video.
My VCR will rewind or "play" even when no tape is inside it
What's the music?
Anyone else concerned from the beginning on whether or not this is reliable instruction based on the fact they don't know the difference between "insure" and "ensure", or has my OCD gotten a little too extreme?
At least in the U.S., both spellings are commonly used.
@@CamcorderTests
But they have different meanings...
It's 2019. Why am I trying to repair an old Sansui VCR that was crappy to begin with. I need a woman......
Lol you and me both I reckon
i have one and i’m still a crazy retrohead. never lose that pride!! it’s a fantastic hobby and i’m gonna hold to it forever!
Helpful video
That guy's face is green
+MrVinamp Probably an alien
His hands are too :P
Alien for sure
HAHAHAHAHAHA
look who's talking
WHERE IS VOLUME 2?
(to be sure: i love this video)
where's part 2?!!!
I tried typing it in, but nothing came up.
how are you supposed to watch this tape if your vcr is fucked?
Portalo dal tecnico,oppure trova un videoregistratore buono,il mondo e' pieno
4:56 How to do a test run like that without putting a tape in?
VHS VCRs have optical sensors for the end of the tape. Just cover the sensors with black electrician's tape and then the machine will be able to perform its transport functions without a tape.
I laik this video:)