Origional Factory Training of Panasonic Sylvania VCR chasis alignment G-Chasis / G Mechanism
HTML-код
- Опубликовано: 6 сен 2024
- Original Genuine Factory Training from NAP Video on Proper alignment for the G-Chasis / G Mechanism VCR Mechanism.
****WARNING***** This is a long video. 25 minuets.
This was produced in the late 80's early 90's. and was very common among many brands of VCR.
Panasonic, Maganovox, Sylvania
AG-w1 AG-1830 more coming...
It’s been a couple or so decades since I seen this one, great to see it again! It was always easier to install the cassette housing with the unit in the half-loaded position, you didn’t really need to take it apart as they mention, in the video, you just have to pull that rack gear on the cass housing under tension to get it properly aligned with the gear on the chassis. This was awesome man thanks for uploading this!
I made a big mistake and installed the cassette housing in the ejected position while the gears were in the half-loaded position. RIP NV-FS200 S-VHS. :(
Where do i get split lock washer?
👍👍👍
Que nostálgia de los cientos de vcr que repare años atras y sobre todo esta mecánica G, pasarón muchos por mis manos en España
Vení a Uruguay asi me reparas el mio que quiero pasar unos vhs a digital XD
Hola amigo .. porque mi Panasonic av 1730 el tramsporte se sacude con mucha vibracion.. gracias
Thanks for posting this video - Very helpful in getting my Panasonic AG-W1 working after 4+ years!
You’re welcome. I know it’s a horribly difficult thing to figure out.
@@iRepairElectronics I spent 12 hours - 2 late nights + a long morning - comparing three videos and going back & forth to ensure I didn't muck anything up, and double-checking, as the AG-W1 is a solid player as well. I had 2 of the model a good 20 years ago, and the only issue was heat; the lack of any fan ensured long hours of operation would heat up circuits and fry something (which did occur). But if you add a Sears fan in the back, the issue is gone. Your posted video has the right pacing for a novice, and one also develops deserved admiration for Panasonic's engineers in trying to simplify a complicated assembly for repairs. Best Wishes - Mark H.
@@iRepairElectronics where do i get split lock washer?
@@iRepairElectronics and do i need regrees gear?
Спасибо вам, благодаря этому видео я смог собрать данный механизм так что бы он работал.
Thank You for uploading this Training Video.
Brilliant ! ! Thank you for this and the detail.
Your welcome. Good luck
I wish more people would fix VHS players these days. I can't find anyone in my area. Learning myself now.
Hard to find anyone to fix electronics these days.
Thanks so much for sharing this video easy to follow. I was able to align my AG-1970 and get it working again. It has been sitting for a few years and now most of the flip down control panel buttons do not work. Can the flip down panel be taken apart and cleaned or repaired?
How do u regrees?
Gracias muy bueno su video .Este tutorial me sirve para panasonic vhs NV-G39PX
My Panasonic p11 vcr super three head machine is in stand-by
mode. kindly help
First off , thats not a model number. Second i cant see your machine from here.
@@iRepairElectronics thanks for replying. its a VTR model
Please make a video of vcr philips.
video about Hitachi please
👍👍👍
Good job sir
I have National VCR NV-7500
Cassette not play. Its tap around the drum but did nt play video.. why...how fix it..
If the tape is moving, you might have dirty heads. I will put up a video soon on how to clean video heads without breaking them
Hi. I recently overhauled an NV-7500 and it's now fully working so I might be able to help. Does the pinch roller solenoid kick in after the mechanism finishes its loading process?
Thenks
Ottimo
Hi Is it same as Panasonic VCR NV-SD 350
No
wow ,,,,thats,,, so complex
Darn tootin it is. and yet when i tried to get a decent amount of money to make one of these working properly, customers always complained it was too much. and then went and bought a new VCR.
god i hated working on that mechanism. Thank god them days are gone.
Wow, no vcr mechanism should be this complicated , this is a bad design......but still an interesting vid.
How is this complicated? It's close to any standard VCR mechanism - they're all complicated (and good designs). The only ones I'd call "not complicated" are the plastic ones from the early 00's to the end of VCR production, and those were cheap, nasty and broke easily. This is what a VCR mech should be like, nice big chunk of metal with low quantities of plastic, shame they stopped doing it instead choosing to lower costs with plastic.
The G mechanism is just over-engineered. Compare this to the previous D mechanism and you'll see...
You can see why the K-mechanism was designed to be much easier to align. And it is. I had to do one recently because the large sliding assembly had split, I just followed the service manual and put it together no problem, having never re-timed one before. The G-mechanism is a lot harder to work on. It's also very slow and clunky in operation compared to the K.