@@tituslittle deffo accel.seen somewhere they cut a sec on accel and topspeeed with a 12gr. wondering if they put air scoop to max air flow will it breath easier and go faster. a bit also the exhaust pipe
I need to get a scoot, been thinking about getting a Ruck for my first bike and possibly moving up to a Navi after I see how much aftermarket stuff develops.
@@Scooterswapshop I want the Ruck since I like the looks more and a small scooter like that would be great for running around local roads. Plus I want something I don't need a motorcycle endorsement for to learn on and then move up if I want to go faster or further. Plus insurance on a 50cc step through should cost all of nothing.
@@themadscientest I had a Ruckus & just bought a Navi. Ruckus msrp is $2900 for 50cc. The Navi msrp is $1807 for 110cc. Navi is much faster & top speed around 52mph. Ruckus top speed is 35mph. It is very slow & any incline your going even slower. It can't keep up with traffic. Navi has a huge storage & Ruckus has none. Insurance on Navi or Ruckus were both around $150 a year. Ruckus is way better on gas though but go with the Navi.
Amazing tip guys !! Love this type of vídeos hanks for sharing . This mod Will Work fine combine with mnntbx air intake ??? I will like to add both ítems to my navy
So, 50psi in the tires and 11g wts in the front pulley... And, 55mph is absolute tops for these little guys? It's a nice 'companion' for our Grom. Which, btw, is 5mph faster by dropping 1 tooth off the front sprocket! It'll now hold 64mph on the flat and 69 with a tailwind!
rev limiter delete, clutch and variator swap, carb swap, exhaust swap, would probably get it over that 60mph hump, and might break even with grom msrp lolz
Hi SSS, planning on getting a NAvi soon and looking for a little more acceleration from a stop and mid-range since I live in a hilly area, but I also have to do some highway cruising for commuting. Do you guys think that going with 11g for a 170ish guy will do the trick without changing the rear bell? Also, I've heard that sliders might damage the OEM variator, is it true or not? and... can you mix rollers and sliders?? Thanks and greetings from central America
@@sargera1 Most ebikes are an internally geared hub motor. But, mid drive elec motors are more efficient. However they break thin bicycle chains easily and the chains make noise. Some use a fanbelt drive which made me think of CVT belt drive setups like we use in scooters, and other gas powered vehicles. But, I haven't seen one used with elec motors yet
@@Scooterswapshop damn. I ordered the navi through my local dealer. Just waiting for it to arrive. I'm trying to order all the parts ahead of time hoping they get here around the same time. Stretching it at some point is top of my list.
got about 600miles on my bike so I guess it's already broken in, cause I get 50mph no problem (even tho I weight 230lbs), these rollers are gonna give me like 52mph tops right? Can't believe you cut 1/4 mile time in HALF with just rollers? Wtf buying em. Do rollers need to be replaced with time? how much would these last? Complete scooter noob!
hard to say what it will give you with your weight size its all variable buut take off you will notice they wear out over. a really long period of time no milage time frame we have CVT videos that will familiarize you
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
Can confirm 11g sliders pick the Navi right up.
Just acceleration or top speed?
@@tituslittle deffo accel.seen somewhere they cut a sec on accel and topspeeed with a 12gr.
wondering if they put air scoop to max air flow will it breath easier and go faster. a bit also the exhaust pipe
The Navi is growing on me finally.
its kinda cool
@@Scooterswapshop I'd 1000% rather have a Dax or Monkey though.
@@Scooterswapshop hey how tall are you?
Just got my Navi two weeks ago can’t wait to mod love the content and the app you guys put out is 🔥🔥🔥
thanks sir!
Where can I buy one on U.S. market?
Surprised you don’t mark the variator to see how high the belt is riding for max top end speed.
Finally I found a RUclips channel thats local to me, just picked up a navi last week, might have to swing by yalls place👍
We are by appointment but we have the option to pick up your parts after you purchase. So select that! ring the door bell for access.
Dyno a Navi is funny AF! Good work guys.
Once my Navi reached 150 miles it has gotten noticeably faster.
I'm at 35 miles on mine.. I'm hitting 47 top.. how much faster is yours going now?
Mine reaches 54mph stock after having 400 miles on it
@@wascalywabbit 52 MPH. I weigh 204
nice this had 8
54mph
Have you guys thought about upgrading the tank capacity??
Would love to see this, I need more gas man.
I love this channel omg
thanks!
did you subscribe?
I did an ECU tweak on my Ruckus to hit 10k and it was a BEAST. Anything like this viable for the Navi?
I want to get these and have them installed. What's the cost of labor? Also anyone want to recommend a shop in ATL?
Just waiting the year for my warranties to run out. Then im modding the hella outta my Navi
Yall boys cold
Happy Monday guys, thanks for the video!!
Our pleasure!
Glad they had that thang rachet strapped down!
I need to get a scoot, been thinking about getting a Ruck for my first bike and possibly moving up to a Navi after I see how much aftermarket stuff develops.
just go right for the navi!
@@Scooterswapshop I want the Ruck since I like the looks more and a small scooter like that would be great for running around local roads. Plus I want something I don't need a motorcycle endorsement for to learn on and then move up if I want to go faster or further. Plus insurance on a 50cc step through should cost all of nothing.
@@themadscientest Don't, personally owned a Ruckus for 6 years, they are very temperamental.
@@coltmeyer4590 Modded or stock?
@@themadscientest I had a Ruckus & just bought a Navi. Ruckus msrp is $2900 for 50cc. The Navi msrp is $1807 for 110cc. Navi is much faster & top speed around 52mph. Ruckus top speed is 35mph. It is very slow & any incline your going even slower. It can't keep up with traffic. Navi has a huge storage & Ruckus has none. Insurance on Navi or Ruckus were both around $150 a year. Ruckus is way better on gas though but go with the Navi.
Amazing tip guys !! Love this type of vídeos hanks for sharing . This mod Will Work fine combine with mnntbx air intake ??? I will like to add both ítems to my navy
yes sir
Just smoked 17grams
Me too
I'm so glad I bought a grom instead.
Different bikes for sure! These aren’t really comparable with a grom as they’re less than half the price
@@Scooterswapshop Well comparable to a used Grom tho. Dealers want around 3200 for new OTD in Texas.
So, 50psi in the tires and 11g wts in the front pulley... And, 55mph is absolute tops for these little guys?
It's a nice 'companion' for our Grom. Which, btw, is 5mph faster by dropping 1 tooth off the front sprocket! It'll now hold 64mph on the flat and 69 with a tailwind!
rev limiter delete, clutch and variator swap, carb swap, exhaust swap, would probably get it over that 60mph hump, and might break even with grom msrp lolz
Lov this dyno the navi
How fast are they stock and how much faster can they go with upgrades?
watch previous video
@@Scooterswapshop link
Got mine yesterday hit 48
mine should be in next month. I know where I am spending all my money!
Order asap because we are limited on stock.
Hiello folks, can you please tell me what is the original wegth for rollers?
17 grams !
@@Scooterswapshop thanks!!!
Hi SSS, planning on getting a NAvi soon and looking for a little more acceleration from a stop and mid-range since I live in a hilly area, but I also have to do some highway cruising for commuting. Do you guys think that going with 11g for a 170ish guy will do the trick without changing the rear bell? Also, I've heard that sliders might damage the OEM variator, is it true or not? and... can you mix rollers and sliders?? Thanks and greetings from central America
no mods will make it safe on the freeway
Can you add a 400 hp turbo to it?
@@Scooterswapshop we went to the moon in 1960. We can do anything.
I’m already reaching 54 mph fully stock but I weight 140 wet pounds. I would want to look for 13gs and see how they do
in stock you can get both sets and do 3 and 3 see if that helps or just 11 or just 13
What are best weights to use for more speed
Was this live? I missed it, getting ready for a ride 🥸 myself
not live no
The popular belief is that heavy roller weights mean more top speed.. this was proven once again that just isn't always true
depends on like 20 factors so that statement is true and false
@@Scooterswapshop True that😁😁
Anybody know how to get a hold of a dio in the states? A few importer recommendations?
nope
Lacompanyc
My navi Is coming at the end of may 2022 I’d like to buy the kit of everything I need to make it faster and more efficient can I get get some help??
we have a entire website dedicated to scooters! also have a build sheet option!
pumped to see the filter and jets
nice!
Any roller recommendations for a 2021 Vespa 150 to go a little faster?
call the shop paul can see what he can find for ya
Question... Do you think a CVT would work on a mid-drive ebike or emoped?
whhaddaya think theyre on right now.
@@sargera1 'E-Bike' as in Electric Motor... I have CVT on a gas motor already. But I see no one putting one on an electric motor...
@@johnw65 they use that redux gear tho so its like a bit reverse cvt.other wise that torque on get go will wreck yer transmission
@@sargera1 Most ebikes are an internally geared hub motor. But, mid drive elec motors are more efficient. However they break thin bicycle chains easily and the chains make noise. Some use a fanbelt drive which made me think of CVT belt drive setups like we use in scooters, and other gas powered vehicles. But, I haven't seen one used with elec motors yet
Paul is handling business
yep
Nice work, Paul Lawrence 👍
he says thanks
What you guys think about the DAX back in Europe… hellyah !
made a post on ig and Facebook gonna be cool
Al the real men do the "power tuck"...Its a well known fact...
YEP, HAVE YOU SUBSCRIBED YET?
i knew it. now cvt kinda has a light tune can't wait for the full cvt tune it will gain a lot, plus a better carb forreal it be a lot better.
all in stock
Google just showed me the new Dax if we actually get it
saw that!
Should I buy 11, 12, or 14 gram?
buy all and tune it to your needs.
I did 55 on mine lay down on it
Do they make stretch kits for these yet???
no we thought about making them but no proper way to lower the front yet. so would look wonky
@@Scooterswapshop damn. I ordered the navi through my local dealer. Just waiting for it to arrive. I'm trying to order all the parts ahead of time hoping they get here around the same time. Stretching it at some point is top of my list.
Good stuff…😎👍🏼
yeah buddy
I'm taking notes 😆
good to hear!
How reliable is this vehicle default? Replying back to me ASAP would be appreciated greatly!
vehicle default?
got about 600miles on my bike so I guess it's already broken in, cause I get 50mph no problem (even tho I weight 230lbs), these rollers are gonna give me like 52mph tops right?
Can't believe you cut 1/4 mile time in HALF with just rollers? Wtf buying em. Do rollers need to be replaced with time? how much would these last? Complete scooter noob!
hard to say what it will give you with your weight size its all variable buut take off you will notice they wear out over. a really long period of time no milage time frame we have CVT videos that will familiarize you
I bought one
Where is the gilera runner?
Needs water pump seal replaced
@@Scooterswapshop can you make a video about it?
Fantastic video. Trash music. Thanks for this.
Remember to break bolts loose by hand... these are cheap bikes lol
we know
❤❤❤❤❤❤❤
You've got to be kidding me...this bike must come in the liberal snowflake starter pack.
Explain
lemme guess, you ride a 5000lb harley
@@Tirfing88 close, a 418lb Ducati.
David.... WEEEEEAAAAAAAAKKKKKK!!!!!!!!! 😂😂😂
he lost. get the fuck over it
❤❤❤❤❤❤❤❤❤