Thank you for your video. Just one comment. It would've been helpful to know that the main water valve needed to be turned off before removing the cartridge.
@@eportillo12 for sure, sorry! I did forget to mention you'd have to turn your water off at the meter or the main water line running to the house, its a live line, my apologies!
😂😂😂 Some people obviously shouldn’t be trying to work on their own stuff. The lack of common sense in people is baffling to me. “ “Remove the shower valve…” “Wow!!! I didn’t know there’d be water pressure bind my water VALVE!?” 😂😂😂😂😂 These people… PLEASE PLEASE PLEASE shoot video if you work on anything electrical!!😂😅
the internal balancing spool that a 1222 has musta fail? whereas the 1225 balancing spool is not part of the cartridge but is built into the valve body hence the cheaper price since it's two separate units unlike the 1222 cartridge cost is twice as much because the balancing spool is in the 1222 cartridge...you should hear the spool move back and forth when you rattle the 1222 cartridge, telling you it's not stuck
I blow torched a screw driver and burned the plastic to get it out, but before you do that try putting the center screw into the cartridge and use a hammer nail pulling side to slide it out.
I've got the same issue. I even bought a whole new one and replaced the entire thing. no change. cold water drips. removed the valve and i've got plenty of pressue from both H and C but valve back in no cold. i've been in contact with MOEN and THEY ARE NO HELP!!!! FK MOEN! I WILL NEVER BUY THIS TRASH AGAIN!
@@basscartel4032 flipping the cartridge upside down. i just had to label the C and H backwards. I can not stand MOEN they did this and create balancing loads so people don't scald themselves. I even cursed out the idian on the phone saying "WHAT THE FK BUSINESS IS IT OF YOURS WHERE YOU NEED TO MONITOR MY HOT OR COLD?. I'm an adult If it's too hot I can move it further to C.. JUST MAKE A FAUCET THAT OPENS AND CLOSES THE H AND C VALVES"!!!!
@@beegee8900 Greetings, there is no fix for it, please since you know so much about doing the job right, make a video of the complete proper repair.. if not, I'd sit this one out.
@@StMichaelWarrior undedicated you say? Hmm show us the proper repair then, since you're obviously a professional, a new valve will NOT fix the issue, I've tested this multiple times over and over with new cartridges, and again it will NOT work, but you'd know that already right? mr. know-it-all, oh and by the way, the video is for people who cant afford to destroy their wall replacing the entire shower valve assembly, but again you'd know that right? kick rocks bud. 😂
Thank you SO much bro!!!!!! My shower went from warm to scalding hot. I flipped the cartridge like you said and that took care of our problem. 👍🏼🙋🏽♂️
@@carlosmillan Awsome glad it worked man! I still can't figure the issue out but it works for now!
Thank you for your video. Just one comment. It would've been helpful to know that the main water valve needed to be turned off before removing the cartridge.
@@eportillo12 for sure, sorry! I did forget to mention you'd have to turn your water off at the meter or the main water line running to the house, its a live line, my apologies!
😂
@@michaelmartinez4515 that’s funny
Lmaoooooooooo
😂😂😂 Some people obviously shouldn’t be trying to work on their own stuff. The lack of common sense in people is baffling to me. “
“Remove the shower valve…”
“Wow!!! I didn’t know there’d be water pressure bind my water VALVE!?” 😂😂😂😂😂 These people… PLEASE PLEASE PLEASE shoot video if you work on anything electrical!!😂😅
Hi thank you! I'm having the same issue and I had to do that also.
Thank you... mysteriously... it works..
Thanks, it worked great!
the internal balancing spool that a 1222 has musta fail? whereas the 1225 balancing spool is not part of the cartridge but is built into the valve body hence the cheaper price since it's two separate units unlike the 1222 cartridge cost is twice as much because the balancing spool is in the 1222 cartridge...you should hear the spool move back and forth when you rattle the 1222 cartridge, telling you it's not stuck
thanks
i have the same situation! i replaced the cartridge and it got i little bit better but still not cold enough!!!!!!
I cannot get the cartridge out for the life of me. Pin removed pulling on it with pliers or Chanel locks and cannot get it out. Any advice?
Try some hand soap to lubricate it
I blow torched a screw driver and burned the plastic to get it out, but before you do that try putting the center screw into the cartridge and use a hammer nail pulling side to slide it out.
Use the Moen cartridge puller.
I've got the same issue. I even bought a whole new one and replaced the entire thing. no change. cold water drips. removed the valve and i've got plenty of pressue from both H and C but valve back in no cold. i've been in contact with MOEN and THEY ARE NO HELP!!!! FK MOEN! I WILL NEVER BUY THIS TRASH AGAIN!
What fixed it ?
@@basscartel4032 flipping the cartridge upside down. i just had to label the C and H backwards. I can not stand MOEN they did this and create balancing loads so people don't scald themselves. I even cursed out the idian on the phone saying "WHAT THE FK BUSINESS IS IT OF YOURS WHERE YOU NEED TO MONITOR MY HOT OR COLD?. I'm an adult If it's too hot I can move it further to C.. JUST MAKE A FAUCET THAT OPENS AND CLOSES THE H AND C VALVES"!!!!
один из лучших каналов по теме
Thank you! 🤝
Wow Man, if you try to do the job do it once, and do it right. This is a crap-fix. Please ...........
@@beegee8900 Greetings, there is no fix for it, please since you know so much about doing the job right, make a video of the complete proper repair.. if not, I'd sit this one out.
DO NOT DO this !!!!! Buy a new valve and install correctly. THis guy is just simply uneducated. WOW, DO NOT DO THIS
@@StMichaelWarrior undedicated you say? Hmm show us the proper repair then, since you're obviously a professional, a new valve will NOT fix the issue, I've tested this multiple times over and over with new cartridges, and again it will NOT work, but you'd know that already right? mr. know-it-all, oh and by the way, the video is for people who cant afford to destroy their wall replacing the entire shower valve assembly, but again you'd know that right? kick rocks bud. 😂
Hey man i replaced 3 valves and makes the Same 💩 😂😂