Service shock quite regularly anyway!! But yes good point to do them! We run the standard motor although we will have a video shortly of a different motor in one of our UDRS and will do a back to back comparison with the standard
my udr suddenly came to a halt running flat out on 6s after stripping truck down i found the motor had seized completely ,this sudden stop (i am assuming) caused the front spur gear to loose two teeth, so i found this tutorial much help , now fully repaired except the motor which is on order,do you know if the old motor is serviceable the bearing is fine but it is just locked solid ? thanks again for the advice on the channel very helpful indeed. ps your advice on how to stop my pinion coming loose worked because it took me ages to get it off haha .
If the motor has locked solid then i would think the rotor has exploded in that case you need a new rotor or some debris has got in the motor. More likely to the second one. I have done a video on rebuilding a brushless motor
Thank you, i thought that this was super hard and complicated, but no! You saved my afternoon, and you got yourself a new sub
Glad it helped!
Thank you👍🏻. You saved my afternoon😎
Glad we helped
information starts at 2min
Thanks helped me a lot
Service your shock since its apart too. And what motor do you recommend for an upgrade? If its if necessary to do so. Thoughts??
Service shock quite regularly anyway!! But yes good point to do them! We run the standard motor although we will have a video shortly of a different motor in one of our UDRS and will do a back to back comparison with the standard
my udr suddenly came to a halt running flat out on 6s after stripping truck down i found the motor had seized completely ,this sudden stop (i am assuming) caused the front spur gear to loose two teeth, so i found this tutorial much help , now fully repaired except the motor which is on order,do you know if the old motor is serviceable the bearing is fine but it is just locked solid ? thanks again for the advice on the channel very helpful indeed. ps your advice on how to stop my pinion coming loose worked because it took me ages to get it off haha .
If the motor has locked solid then i would think the rotor has exploded in that case you need a new rotor or some debris has got in the motor. More likely to the second one. I have done a video on rebuilding a brushless motor
Hello. Please what part (plastic black) on the roof is? Where I can buy this? Thank you
It's a 3D printed roof skid we made - contact us on Facebook and we can make you one
👍