My peanut bulb does not come on with marker lights or with turn signal on. Peanut only comes on when lights fully on. Could i tap into turn signals instead? There is 3 wires there.
Bottom light assembly. Has a bulb with 3 wires . A,B,G if you want what he did A,G as a turn signal . If you want it running all the time when the vehicle is on B,G . Your welcome. 😊
Thanks for helping him out with that the way I have it keeps it on whenever lights are on as well, or also on when ever you turn your lights to the marker light position, then flashes when turn on turn signal. I have it running off the peanut bulb wires not the big turn signal bulb though
What bulbs did you use I got the same light assembly but my light pattern is shit I can barely see .. some 50 dollar led bulbs in it now I’m looking to upgrade. What you recommend 2004 Tahoe
I used the ones like thats in the link in the description. You have to make sure the LED are pointed side to side or u don’t get a good pattern idk if that’s ur current problem I show what I mean by that an how to clock them in my Halogen vs LED video
I just wired mine up and noticed that the blinkers are going at a really fast pace like one of the bulbs are low, I haven’t replaced the bulbs yet but I have ordered them I was just wondering if you had this problem too
Did they work before or did they never work? Is it just 1 bar not working or all of them. If all of them stopped check the fuse in your truck for the marker lights, if its just 1 check your wiring connection
Your running day light bulb on the bottom piece has 3 wires A,B,G if you want what he did. Wire A,G if you want it running all tye time with out it flashing like a turn signal B,G
Nice clean look. Awesome job! I have a question though. I tried looking up the headlight bulds with the link and no dice. Could you let us know in the comments which bulbs they are or another link? Thanks.
Ok I updated the link in the description for the lights looks like they changed up the style a little bit but they have a 5 star review so should be pretty good
I got these for my 2004 rahow and I’m very confused I tried to connect the drl led strip to the Drl bulb put they won’t turn on at night ? Haven’t tested it out during the day yet , but let me know what o did wrong😅
Also fyi they don’t come on unless you’re in gear so you have to put your truck in gear and go check if they’re on. Obviously with engine not running lol
@@FrogsGarage yeah I wish you would’ve been more specific about what lights and what color wires you connected to what. I’m trying to learn this as I install. And I ain’t got that shrink tape stuff
2:30 I show bulb I cut off and the 2 wires on the truck from that bulb I told u I was connecting the LED’s too. 4:30 I show connecting the LED to truck and tell u to test connect for correct polarity to check LED works before permanently crimping. With close up showing I had the 2 whites going to brown and black to the blue
White wires from both top and bottom new lights to brown turn signal Black wires from top and bottom new lights to black turn signals? For led strip to work?
Yea much cleaner look IMO waiting on my custom fiberglass hood and bumper to finish being made now and got to get rollpan done on back to round up the body then be looking at repainting
have you gotten a ticket for that yet those whites as signal lights ,they are going to burn out faster running as signal lights , I give it a year at best before they burn out
Thank you I appreciate your video. Helped me a lot.
Glad it helped
This video is perfect, I just got these in I’m waiting for the new headlight brackets to come in so I can put them on
thanks bud i appreciate the feedback
Thanks man was kinda stuck but thanks to you I got it 🤘🏾
No problem glad could help
Are they the black clear from dna or smoked ones ?
Its the black clear ones
How did u Eliminate the turn signal bulb my turn signals won’t work when the bulb is in.
My peanut bulb does not come on with marker lights or with turn signal on. Peanut only comes on when lights fully on. Could i tap into turn signals instead? There is 3 wires there.
How do u adjust the beams ?
Nice video
Thanks bud
Clean like it
Bottom light assembly. Has a bulb with 3 wires . A,B,G if you want what he did A,G as a turn signal . If you want it running all the time when the vehicle is on B,G . Your welcome. 😊
They well also turn on when you turn the knob in the cam without the vehicle running. If you wire B,G
Thanks for helping him out with that the way I have it keeps it on whenever lights are on as well, or also on when ever you turn your lights to the marker light position, then flashes when turn on turn signal. I have it running off the peanut bulb wires not the big turn signal bulb though
Did you cut the bub part off?
Which one is b G ?
I tried I’m not getting anything
I did the same wiring for my lights and the led stripe don’t turn off :/ and my low bean won’t turn on can you help me please
Switch the wires
What bulbs did you use I got the same light assembly but my light pattern is shit I can barely see .. some 50 dollar led bulbs in it now I’m looking to upgrade. What you recommend 2004 Tahoe
I used the ones like thats in the link in the description. You have to make sure the LED are pointed side to side or u don’t get a good pattern idk if that’s ur current problem I show what I mean by that an how to clock them in my Halogen vs LED video
@@FrogsGaragecould you send another link? that link doesn’t work anymore
What size gauge wire for crimp connections ??
I don’t remember off the top my head I think 16 gauge
so what are all the wires you need so i can order them right now??
Didn’t have to order wires just used the factory wires
I just wired mine up and noticed that the blinkers are going at a really fast pace like one of the bulbs are low, I haven’t replaced the bulbs yet but I have ordered them I was just wondering if you had this problem too
If ur using just the LED as turn signals like me it’s gonna flash faster cause there is less resistance in LEDs
It is a thing called hyperflash to eliminate, you have either wire in resistors or get a flasher relay (look it up)
@@beast5468 alright thank you for the help I was just afraid I had messed up something while doing this, the video was very helpful thanks
What wire makes them led strips blink for the turn signal the peanut or the turn signal idk which to cut
@@FrankEstrada956 it’s the wire that goes to the turn signal bulb
@@FrogsGarage so there’s three wires that go to the turn signal bowl which wires connect to where boss?
I was able to do it bro on my 02 Chevy!! Using the first two wires out of the 3 wire harness from the blinking light
@@FrankEstrada956 glad to hear it boss
How do you make it flash faster?
Its cause Im using just LED's for the turn signals. LED's have lower resistance than the flourescent bulbs so it make it flash a little faster
you're supposed to install a resistor if done properly
Nice video bro have a question when you turn truck on is it just the strips on while driving or all the lights are on
Just the strips on when you have just marker lights on
What bulbs did u use ?
I use Sealight bulbs I think the link is in description
What brand are your headlight bulbs
Sealight I did a video on them as well
the led bar doesn’t turn on anymore when i turn on my marker lights anyways on how to fix it ?
Did they work before or did they never work? Is it just 1 bar not working or all of them. If all of them stopped check the fuse in your truck for the marker lights, if its just 1 check your wiring connection
How do you just have the led strips on
They are wired as the marker lights
Your running day light bulb on the bottom piece has 3 wires A,B,G if you want what he did. Wire A,G if you want it running all tye time with out it flashing like a turn signal B,G
On the bottom lights do u have light bulbs in them or just the white signal?
Just white Led signal
Nice clean look. Awesome job! I have a question though. I tried looking up the headlight bulds with the link and no dice. Could you let us know in the comments which bulbs they are or another link? Thanks.
When I get back home from work this weekend I’ll update link to a current one
Thanks FrogsGarage
Ok I updated the link in the description for the lights looks like they changed up the style a little bit but they have a 5 star review so should be pretty good
How have these held up in the last 8 months?
They have been good but I also keep this truck parked under car port alot too so
I connected the led lights to the turn signal as well but they only turn on when the blinker is on
Did u wire it to the Peanut Bulb one that works as marker light and a turn signal
The one at the 2:36 mark in the video that I cut. That’s the one to use for it to stay on as a marker but also flash for ur turn signal
I got these for my 2004 rahow and I’m very confused I tried to connect the drl led strip to the Drl bulb put they won’t turn on at night ? Haven’t tested it out during the day yet , but let me know what o did wrong😅
DRL does not come on at night that’s why it’s called day time running light 🤣
Also fyi they don’t come on unless you’re in gear so you have to put your truck in gear and go check if they’re on. Obviously with engine not running lol
what kind of led bulbs is those?
The link for the exact bulbs is in the description
what lights wires did you connect the led bar to on the truck
Hooked into turn signals
@@FrogsGarage yeah I wish you would’ve been more specific about what lights and what color wires you connected to what. I’m trying to learn this as I install. And I ain’t got that shrink tape stuff
2:30 I show bulb I cut off and the 2 wires on the truck from that bulb I told u I was connecting the LED’s too. 4:30 I show connecting the LED to truck and tell u to test connect for correct polarity to check LED works before permanently crimping. With close up showing I had the 2 whites going to brown and black to the blue
White wires from both top and bottom new lights to brown turn signal
Black wires from top and bottom new lights to black turn signals? For led strip to work?
Nice lights! I have a 2000 they would look great on
Yea much cleaner look IMO waiting on my custom fiberglass hood and bumper to finish being made now and got to get rollpan done on back to round up the body then be looking at repainting
have you gotten a ticket for that yet those whites as signal lights ,they are going to burn out faster running as signal lights , I give it a year at best before they burn out
@@RogerJohnson-j9v still work just fine 2 years later and cops never bothered me
@@FrogsGarage awesome
Watching your latest video is gonna make me spend 600+ haha
Haha I’m still waiting on my custom fiberglass hood that’s being made and stuff lol this truck is the only thing I spend money on
How would you wire the top led strip ones
I ran both led strips off my turning signal/ marker light
I like it
What I’m doing now