How to Make a Free Energy Generator!
HTML-код
- Опубликовано: 30 сен 2021
- This video is about free energy generators.
It's time to ditch the old energy sources and look for new, cleaner alternatives.
People are always looking for new ways to generate energy. Whether it be wind, solar, hydroelectric, or geothermal.
But what about zero emissions? Free Energy? Could there really be a way to create renewable and sustainable energy that doesn't cost anything at all?
A lot of people are skeptical that it's possible to generate energy without any emissions at all. But others think they've found the answer.
What do you think?
Watch this video to find out more about free energy generators.
☕️ LOVING THE VIDEOS? SUPPORT THE CHANNEL AND BUY US A COFFEE 😄
www.buymeacoffee.com/MarkusNe...
Aluminum Profile: amzn.to/3J7ibyD
Keyless Bushing: amzn.to/3EgFgLp
Pulley: amzn.to/3yWSaNS
Shaft: amzn.to/3phWfsz - Хобби
Your workmanship is top-notch. As Thomas Edison said. "Just because something doesn't do what you planned it to do doesn't mean it's useless." And“No free energy device will ever be allowed to reach the market.”
- Nikola Tesla
I'm no inventor by any means just a diesel mechanic that likes to fix things but your workmanship is off the charts, my man. Great job
Wow thanks very much!
With the limited tools and resources it turned out pretty ok :) but unfortunately not working as some people claim it should.
Hope you had a chance to check out my latest video about a really cool invention.
ruclips.net/video/wqbJWBtoFMQ/видео.html
But is it motor 1kw
End generator produced 4kw
That is good.
Tesla was right, no energy device will ever be allowed to reach the market... because he knew it was not possible and with the Edison quote, you are agreeing this is useless to generate free energy; but might be useful to teach someone how to assemble things out of available parts.
@@Flea-Flicker +
@@Flea-Flicker It wasn't because he knew it wasn't possible. He'd already built one - but 'they' shut him down. The energy business generates a lot of money. If we all start generating free energy you can imagine the ramifications of that.
I did this in 1998 when I was working for Siemens in Munchen, and you can supply enough electricity to ten homes by using a slow-cycle magnet generator.
Touches of intelligence, do not forget
moreDetails?
Yes please share some details and hopefully some evidence.
Thank you!
With a low rpm permanent magnet generator? And a high rpm input?
@@vlogcity1111 iDontThinkThatYouNeedToHaveDifferenceInRpmInputOutput.YouNeedLowCoggingGenerator.
That sounds very interesting
In order to generate power you have to add a small generator to keep the fly wheel running at constant RPM.
A SOLAR PANEL TO RUN THE LOW HP MOTOR TO RUN A LOW RPM ALTERNATOR GENERATOR. i am working on a system now large flywheel of 1000 rpm to a low rpm alternator of 600 rpm using a dc motor, a dc motor has more power than ac and it can run high rpm, run the dc motor from a solar panel and batteries if needed. during the day the system should charge the batteries all day to run all night! 1 48 volt battery would run a dc motor for a very long time, and set the solar panels to charge the battery. next item will be a hydrogen motor generator. the only problem is the corrosion of the plates from the material. maybe titanium would be better than stainless. or make a system to clean the plates and have 2 systems one cleaning while other one is running. just a thought. looking at the hydrogen maker more now!
is not generator supposed to kee[ the wheel running?
Thank you for sharing your experience with this project. I too like to try things for myself to prove or disprove a project.
I think it’s a great way to learn vs. just following the herd.
And yes maybe sometimes it’s a wast of time but never the less an accomplishment no matter the outcome :)
Thanks!
What your attempting is fly wheel energy storage. It's much more effective with magnetic suspension. It's an interesting way to store energy.
*Well, I appreciate your honesty.*
These devices cannot run in closed loop. The reason! Any loss due to friction, heat, etc takes energy away from the output and therefore the output will always be less than 100% efficiency. You need 100% efficiency, as a minimum, just to keep the device running. If you need to run a load with it, the efficiency must be much higher than 100%.
Thanks Valveman!
Try with low rpm permanent magnet alternator
@@MarkusNenning try with permanent magnet alternator
@@AryanKumar-yp6jc
That won't make any difference. It's just not possible!
Everything that moves/Changes in any way converts energy into another form of energy. With any energy conversion you convert a part into heat energy. Thats the core of every Energy conversion that we know of.
And thats why if youd manage to gain more Power from that thing than you put in, its more likely you found a way to tap into a different Energy source to keep it spinning. Because everything else would mean that hundreds of years of studying that dry crap would be wrong and since we havent found a system anywhere that literally produces energy in nature, its highly unlikely that it exists. If there is a way to produce energy, natural evolution would have found it and adapted it.
Thanks for honest video, showing that it's not working, and not faking it as many other channels faking "free energy" for money from youtube ads.
Thank you Diego!
Thanks for taking the time, the effort and willingness of proofing this device. Regards
Thanks for watching Leonel!
I have been trying to build one of these for the past six months for my crypto mining farm. What I found is the generator has to be a Synchronous 1500/1800 rpm generator (I got 10 kw for $800 from eBay).
Some of my Strategies:-
1. Attach the generator directly to the steel bar with couplers (because belts increase friction).
2. Use a 3kw DC motor for the source (operates with batteries).
3. Use a powerGrib timing belt for the DC motor to achieve a constant output current.
These are the steps I have learned so far. I'm still ordering stuff so I will upload a video when I'm done.😄😄😄
Wow! Believe it or not this was actually also planned for a crypto mining rig if it would have worked :)
Please keep me posted would be great if you get it working!
$800 for 10kw is a great price!
Appreciate your feedback!
It can never work 🤣
@@omotolaoyeniyi631 and your qualifications for this statement are? Just a pessimist or do you have some tangible evidence? :)
@@MarkusNenning didn't you go to school? Don't you know physics? Energy can neither be created nor destroyed, only can be changed from one form to another! Law of conservation of energy! We're you sleeping in physics class? Phew! You can point me to any of these contraptions that work. If you watch this video at all, you can tell it doesn't work! Unless you can channel energy from the quantum realm, maybe!
@@MarkusNenning energy can not be create only transform, in the process of transformation their will always be loss. What you are trying to achieve will only work converting energy from water flow (hydrogenerator)
I love your video, very educational. Thank you for taking the time effort to build that machine and share the results with the world.
Thank you very much!
Appreciate that!
The one I have seen in my region that flywheel was 140kg and it was quite difficult for a 2 hp motor to spin it in beginning but when it reached the top speed then it start working like a magic
How long did it last ?
Good to see that you tried. Electric motors have an internal resistance which uses energy created in the system, this loss means energy is wasted. Due to this resistive energy loss, the system slows as there is less energy at the output than what is input.
magnetic motors are now used in computer cooling fans; no friction.
@@boondoggle3898 You missed the point here and I'm not sure explaining things will make it any easier for you to understand based on your comment........ Internal resistance in the motor itself causes heat and nothing to do with friction of the motor bearings. The internal resistance causes loss of power inputted verses power output. Only liquid nitrogen cooled motors have little resistance in the motor winding circuits. Lastly, there are no motors on earth that do not have some friction losses of some kind on top of the resistance loss however small this may be. Pleased think before you make comments especially as it makes it obvious you do not understand scientific principles hence your comment. Understanding scientific principles means not spending money on free energy projects as its not possible to achieve under most circumstances. Just in case anyone wants to try, the nearest you will get theoretically is a near zero temperature coil and phased tapped coils to withdraw the excess energy created. See this as a possibility, hope someone tries: ruclips.net/video/LGvToweUXPA/видео.html
I know what needs to be changed. The rules of physics!
It failed! What are you thinking?
Yes, a book on physics would have been cheaper than all this waisted hardware. Hopefully he made a few bucks on his channel to recover his energy deficit.
Yes the rules of physics keeps on changing since 1908 even before that...
Please do I contact you
I think that you have no knolegment about modern fisics my friend. This is no violation of the any law. Many ones was modificated in the same measures that we find out more about the universe.
It is not about the violation thermodynamics law , it about the magnect energy .
He not modificate the genarator puting magnets and not sincronized the frequency of moutor with the generator. He must create a ressonance betwen them .
The energy comes from magnets that receives from universe radiation. There is many energy around us .
Thank you for this really informative video. I would have liked to see a positive result ... But at least I learned a lot of interesting things ...
Regards
Thank you Daniel!! Yes I would have liked that also better! :)
Thank you for sharing. I think if this is going to work, the generator have to be reconstructed - I see in other videos the permanent magnets are installed in the rotor. But they are installed in a unusual way!
Thanks Urban!
I agree and that’s why I already bought a used car alternator and will try to add permanent magnets to it and modify it.
Cat alternator is 3 phase, u wld have to retred the copper inside to single phase and remove the regulator so it can become A.C generator.
Instead, buy niemodium magnets and construct it on ur that ur generator u used b4..... And try
Hi, In fact, I agree with you but still, there is an important question, Would this process be fruitful if we changed the plan by depending on an electricity source that comes from an off-grid solar system rather than using electricity that comes from a generator in your experiment?
THE MOTOR AND GENERATOR NEEDS TO BE A PERMANENT MAGNET BASE, IE PMA PMM.
The drive motor needs to be 3 phase that is controlled by a frequency drive around 25 hertz... no belts. The generator needs around 750 - 1500 RPM.
Great video. I applaud you attempt to duplicate the other experiments online. Your video has satisfied my urge to attempt this myself.
I think I’ll try a smaller version of it again
Just ordered a bicycle alternator/generator from Amazon:)
The only free enegy is got by plugging into your neighbours mains socket.
😂
Thats OK if your neighbor is not a huge chunky man, Your life span could be truncated.
Obrigado por montar esse projeto para me tirou muitas dúvidas ..porém acredito que não funciona por que o gerador dos projetos são modificado e tem um performance muito superior aos convencionais .. sucesso pra você nos projetos ..
I think the lesson here is that " for every action there is an equal and opposite reaction" ...until friction is introduced, which eliminates the "equal" part of the equation, eventually stalling momentum. The only thing missing from your example is the hidden power source that the hindi all use in theirs.
I wasn’t aware of the hidden cables until so many people mentioned it on here.
I can be a bit naive I guess:)
I have longed to do this myself so as to confirm it but I didn't have enough resources to perform the experiment continue with the same spirit ...thank you
Thank you!!
Hi, where I can find the page to calculate the size of belt and pulli, I also have done the same and works
This is the page telo.
www.blocklayer.com/pulley-belt.aspx
the problem was your pulley ratio and the flywheel due to a bad ratios that causes high tension to the belt drive system,it gave friction the power to stop the kinetic effect on the generator thus creating what we call a failure. But that was a nice idea bro keep on trying free energy is real through this...divide the pulley ratio by 2 and make sure the belts are not too much tight, and at list let the flywheel shaft spin at 3000rpm for the generator to have a good mechanical force
Thank you Zephania!
Yes correct zephania
Did you ever try this?
I have tried all kinds of pulley ratio’s
Tried removing the flywheel weight losen the tension,… just about anything.
I am working on modifying a car alternator now.
Thanks for asking!
Dear, the engine needs to be started through the speed regulator, while maintaining power. The belts should be slightly relaxed. And the gear ratio on the flywheel pulley must be different.
Thank you Sky!
I honestly believe that no matter what ratio or belt tightness this setup will not work.
I do think “free” energy is possible but not in this strictly mechanical way.
The closest we can get to “free” energy is with solar panels and battery banks. There is always going to be internal losses.
Look 🤔👍ruclips.net/video/ZDNpw3ulp44/видео.html
@@skyenergy777 do you really believe that it will sustain itself? I bet you there’s a battery in one of those metal boxes. Which means it will run out after a while and stop working. Did you notice that they never had it running for a long time? Don’t you think that if “free energy “ was even remotely possible, it would be mass. Produced by now? Study electronics. Once you know how electronics and generators work. And how we get electricity. Then you will understand why perpetual motion generators are not possible. There will always be internal losses. That’s why you can’t plug a charger into a power inverter and charge the source battery for very long. You may prolong the charge in the battery for a while. But the internal losses will take affect and the battery will drain.
Add a super capacitor
I love how clean everything looks you need a steel frame 1st I work on carpet cleaning machines that uses a 50mph Honda motor with a belt on a pulli and a runner 🤔
Thank you Seth!
I thought worst case I can turn it into a cool coffee table :)
🤔carpet cleaning machines
Will have to look into that.
I stumbled across this video doing research for my physics class ( I am a mechatronics engineering student and an automation technician by trade). The system you built is of great craftsmanship. Your machine is very aesthetically pleasing, and your mechanical skill is impressive.
The resulting power loss killing the motor is due to the efficiency rating in the generator itself as well as the motor itself, and other mechanical losses such as friction and heat in the shafts and bearings as well as any vibration. You did very well in limiting those transfers as much as possible.
Perpetual energy machines have been pursued by man since the beginning of industrialization. Yet, energy can not be created, it can only be transferred or transformed. . .
Let's say for simplicity you are using 100 volts to power your motor to full RPM. If your motor is only 80% efficiency rating (on the motor tag) then you are only resulting in 80% energy at the pulley ( not counting loss in the pully itself). the generator says it is only 80% efficient as well. So, as a result, you are only generating 80% of the original 80%. Essentially you are using 100 volts to generate 40volts (only calculating energy lost in the motors) resulting in the system consuming more power than produced. This is why the energy is perpetual.
I hope this explanation clears up some confusion.
Please continue your pursuit of clean energy! Thank you for such a well-made video on a well-built machine!
Your humbleness in defeat is just as inspiring as your pursuit and drive! These characteristics are the origin of true knowledge!
Wow thank you very much Jeremy!
Very kind of you to say and thanks so much for your detailed explanation!
You might find my latest video interesting as well. It’s a complete different concept of free energy.
The breakthrough in Free Energy - a system that cannot be debunked
ruclips.net/video/wqbJWBtoFMQ/видео.html
you study physics and still think this is possible? Keep studying,
After watching a few of those videos from India, it seems they use synchronous motors and generators. They can be very efficient, so maybe that's why they seem to work?
Hola , esa pérdida , ya fuera por dónde sea o por lo que fuera , no se podría compensar y tal vez multiplicar aplicando una batería de poleas como ser ...ejemplo ...el sistema de engranaje que tiene un servo de aeromdelismo , pero con poleas y ver la cantidad que sea necesaria y como acomodar los distintos diámetros ?, si no sirve espero nadie lo tome a mal pero me interesa el tema y quería tratar de aportar algo .
You can try to use low speed alternator
Capacitor will help you to store some charges after relay..and it should be connected to the motor
Thank you Daniel
Several people have recommended that.
May just give it a try
Use super capacitors.
@@jatanlimbasiya5350 thanks will look into it.
U did well on your experiments, try using neodymium magnets for your generator instead of coil,u have to modify your generator to reduce the rpm down to 500rpm.thanks
Thank you Henry!
Si correcto es mejor comprar de Aliexpress un generador de imanes permanentes
I think the magnets were just to balance the flywheel.
@@kgsalvage6306 yes I only used the magnets for balancing weight.
I looked into using magnets in addition to help turning but it was too expensive to get such strong magnets.
Thanks for sharing this video very interesting and true full, would love to see if anyone else could solve the problems 👍
Thank you Stephen!
I was searching for a load to be driven by two motors alternatively & stumbled upon your video. You are an inspiration for going after project in such aesthetically pleasing way. I have learned something valuable & going to use it.
Thanks Rajesh glad you liked the video!
I feel like you would get a higher rpm transfer to your flywheel with a smaller pulley attached and the bigger pulley on the drive motor....with a wheel you have to make more rotations with a say 2" wheel compared to a 4" wheel to cover the same distance
My thoughts exactly! Your bigger pulley needs to be on the motor
the larger pully on drive motor causes higher amp draws from motor. the key is to tune the gear ratios for the lowest amp draws while still reaching the correct rpm of all three components.
Don't forget to put the big pulley on the flywheel than the smaller pulley on the generator that would change the out put speed to the generator forn the flywheel
@@joshuaandersen5294 sure you have to get the generator up to the rpm it needs to be able to put out the power the motor must have to spin the flywheel and the generator. The higher the gear ratio from flywheel to generator the faster the generator will spin however spinning the generator faster than is needed to provide adequate current for the motor will increase the amp draw of the motor. That is why I say it’s a balancing act a gear ratio tuning procedure aimed at the drive motor using as little amps as possible while still performing the task of spinning both fly wheel and generator at The speeds needed for the generator to output enough current for the drive motor.
Tip from someone who's been studying this stuff for over 20 years, here's your tip..... atmospheric energy magnified by crystal should give you the difference but it's a totally dif settup
Do you have an example or can you provide some reference material?
Not sure what you referring too Craig?
It’s just because of Lenz’s law braking. I’ya the loading mechanism that needs to be eliminated. Not impossible, as there is another magnetic field created when generating! All you have to do is separate the field that causes the generation from the field that is the reaction from generating! Have a great one.
By changing a battery?
Did you build something like this?
Thanks!
I did this prototype and run successful .with some modifications.congrats for your good job .
You are inspirational for all searchers .
Dr. Qudama
Would love to see that.
Thank you!
If your lacking power to the electric motor you can step up the amps by installing capacitors to you electric motor from the generator.. This I believe will give the amps required while the generator is under load.
Thank you Eugene I am working on a 2nd video where I talk about the use of capacitors.
The flywheel is probably too big heavy.
@@georgeel6868 I was thinking not heavy enough.
Friendly reminder that if "creating energy from nothing" was possible, we would all be dead in a universe infinitely heating up.
It’s not from nothing, I think the initial power from the grid powers this device and then the flywheel stores the energy and powers the generator but it doesn’t last forever
Flywheel stored energy
Technically, since we've already decided that the first law of thermodynamics doesn't apply, we should be able to destroy energy, too, so we could get rid of the heat.
It's a scam. The video is just clickbait to attract the attention of a certain type of people. Notice the use of the term blockchain near the beginning. If you wait until the end, the video has a commercial for a decentralized carbon credit system people can use to offset their carbon emissions. Really, it's just another cryptocurrency. Likely, they put out a bunch of stuff like this to attract gullible people, sucker them into pumping some money into the currency, where whoever is behind it dumps all the money into their pockets.
No wonder the guy can afford such nice hardware go building a really crappy and lazy interpretation of a perpetual motion machine.
I did a search on the currency, verde 350 and the wordpress website is down with some critical error. There was a pdf still online, but it was full of nonsense jargon. Might as well claim to fix climate change back a decade ago with cloud server technology. Blockchain is just some cryptocurrency lingo nobody really understands, so it's easy to toss around to make yourself seem smart.
Well Jordan first off all why would it be a scam if I figured out it doesn’t work and say so in the video?
Second the nice hardware is because I either do things right or not at all and right means also investing in something even if that means it’s lost money.
As for Verde350 it was a great idea and I still think it would help to standardize the carbon offset market and make it less corrupt but it’s too big of a project for myself since I have a full time job.
Also you know how the crypto market is going nobody wants to invest into it at the moment.
The site is may has an error I haven’t paid any attention to it but will look into it thanks for that.
I am just trying to build things and entertain people and grow my RUclips channel. That’s why most of my videos are not about free energy even though that is my most successful most watched video! I don’t make videos just to get views that’s why there aren’t more free energy videos. Always looking for new ideas.
Thanks for watching and your feedback!
Appreciate it!
Have you tried a switching mode power supply gen switches on while motor is off, running both at the same time they both become motors, of use a buffer between power sources
what is the output currently you get? also try to fix a better dynamo which has greater voltage generation in low RPMs
The output drops immediately when switching over.
Thank you?
Hi, thanks for your video, but please let us know about the motor and generator details, because I really want to make it..
and also please let me know about the relation between those... thank you
Hello Mohammad thanks for your feedback. If you watch the video until the end you can see that it is unfortunately not working. I was hoping to get some advice from someone that has a working version myself.
No lo entiendo en mi cabeza lo que has hecho funciona según lo que veo de tu máquina tu alimentas la rueda cinética y mueves el aternador pero la energía acumulada es poca pues en la salida del alternador debes conectar el motor de inicio por pulsos para seguir manteniendo la producción
Thanks for the work you show. Whatever engine you install, the most important thing here is the generator. You have to modify the generator so that there is no dragging Lenz effect, then only with a bank of capacitors you can make this system work on self loop
Thank you green wave.
Have you seen what you describe work?
Would be interesting to see.
Where I work we use capacitor banks for short term energy storage for AGV’s because the are much quicker.
In combination with a battery that is.
@@MarkusNenning yes I have made, see my videos. also if you want to try with regularly generators you must use 2 pulleys on the flywheel with different radius in this case it can work for the driving motor you must use FVD
The only person I know who has done this is the inventor Thane Heins. He has videos on the net for regenerative acceleration.
@@swearick thank you Eric I will look him up.
@@MarkusNenning hi out of curiousness i Wonder if you tryed what green wawe Said or any of the others and made it work? It would have been awsome
Nice work. I enjoyed the thought put into the build. May be now you could use the flywheel and generator as a mechanical battery and see what kind of energy you could store.
In some of those videos they say a permanent magnet generator is used, maybe it would be something to try. They also use a variable frequency drive on some.
Great work brother! You did well is debunking the crap that comes out of India. I’ve been waiting for a video like yours! Great work on the craftsmanship too!
Thank you James appreciate it!
Привет! хороший эксперимент)
Сам думаю над ним уже долго время. Но еще не перешел к опытам.
Собираю информацию надеюсь в итоге у тебя все получиться и мы все хорошо заживем)
попробуй:
1. Использовать трехфазный синхронный альтернатор на постоянных магнитах в 4-5 раз мощней электродвигателя.
2. Обороты не выше 1500r/m. будет меньше вибраций в системе.
3. Трехфазный синхронный электродвигатель.
Также остаются вопросы :
1. Запускать ли систему от сети пока не зарядится конденсатор.
2. Расчет магнитного сопротивление ротора у альтернатора при нагрузках. Но маховик должен решить эту проблему.
Если не получиться,) как вариант систему можно запустить от двигателя с камерой сгорания, который будет работать от генератора водорода. И КПД генератора будет выше затрат энергии производства H2
Привет, а можно с вами связаться?
In this house we respect the laws of thermodynamics!
If you grew up with the imperial system you become very good at adding and subtracting fractions.
Yeah, not gonna lie, I saw that coming. The laws of thermodynamics have been around since Newton and they've been proven right time and time again. You just can't get more energy out of a system than you put in. Even if there were no inefficiencies or friction or air resistance this still won't work. Thank you for being honest about your evaluation. You're the first I've seen.
Thanks Jim appreciate your feedback!
I still haven’t given up completely but trying a different method with permanent magnets.
Remember these so called "laws of thermodynamics" apply to what are called "closed systems". The whole Universe is an "open system" and appears to be in constant motion. Tesla's concept was to hook into the wheelworks of the universe itself, by trying to understand the forces (both known and unknown) that keep it (the Universe) in constant motion. Example: The scientists believe that an atom can last for millions of years, and the electrons of that atom will continue to circle the nucleus for all that time. Where does that energy come from, and is it a "closed system" (thermodynamics laws) or is it an "open system" connected to the Universe "wheelworks"?
@@bigpicture3 Wow, nicely prepared rebuttal. It showed both thought and logic. However for you to be correct your premise must be valid and sadly I don't believe it is. For example, you seem to believe that the electron behaves like a scaled down planet orbiting around a scaled down sun. It's not. An electron is a quantum object. As such, an electron is partially particle-like and partially wave-like, but is really something more complex that is neither a simple wave nor a simple particle. The electron is described by a probabilistic quantum wavefunction, which spreads out through space and vibrates, but in such a way that it still has certain discrete properties such as mass. When bound in a stable state in an atom, the electron wavefunction spreads out into a certain shape called an "orbital". The orbital does not contain the electron or describe the average location of a little hard electron orbiting around. Rather, the orbital is the electron. So, any ideas that the electrons "Orbit" anything is long antiquated. Electrons don't really orbit, They don't store rotational energy.
@@bigpicture3 yes I believe we still have a lot to discover so much is still unknown and not been attempted.
@@jimmarburger611 The illustration was not so much about the quantum-ness of of an atom, or the arguments of superposition or entanglement. It was about is an atom a Closed System and the laws of thermodynamics apply to it. Eventually all motion will decay? Or is it an Open System hooked into the Universe itself, and entanglement is some function of this hooking into the wheelworks.
You need to have separate flywheel and belt on the other side of flywheel that can disengage/engage when flywheel reaches max speed like a bushin. The current setup has too much friction.
this make sense.. yes........ I agree
Even with no friction at all, in a weightless environment , in a magical kingdom, this can't, and will never, work.
Nice attempt. It looks simple but its not simple. The many calculations are processes behind the real functionally project(1. flywheel weight is equals to weight of the generator + motor, 2. motor is of power consumption 300 to 500W, 3. generator is 3 phase minimal 2kW that only one phase energy flow back to motor, 4. two phases are bennefits for output, 5.wheels with rubber band is some sophisticated calculation(I have no detailed info, but motor to flywheel has diameter "d", and flywheel to generator has diameter "D" = a x d, a is between 1.85 - 3.65)) No additional info I dont have, but maybe this can a lot help.
Thank you very much for the information!
Finally someone made a real video......exposed all the fake ones..👏👏👏
I greatly respect your effort and time that you put into your project.
Thank you very much!
@@MarkusNenning the puzzle peace is neodium magnets a type of alternator and electrically induced magenets that gain power as the alenator speeds up and then created more power than is needed to keep the momentum. That way you gain power from the earth magnets as they are the oposing extra force that the powered magnets use to create the rotation. Thats the answer
@@theknowledgewithin6514 working on converting a car alternator at the moment.
Thank you!
@@theknowledgewithin6514 lies
@@marchustletime39 ikr
My brother, you've done a great job I must confess, however, your pulley looks like a one to one ratio, and therefore there is no torque amplification from the drive motor to the generator. hence the braking force from the generator when loaded will be greater than the driving force from the motor at runtime and will coast from max speed to zero. what you must do is double or triple the size of the pulley diameter at the generator side. this will deliver 1 to 2 or 1 to 3 torque conversion. note that you may need a higher speed motor 2 or 3 times that of the generator. a generator with more number of pole pairs runs at a lower speed, you may consider that or have a motor that can run at about 6000rpm or 9000 rpm for the same generator.
Since your drive motor is taking AC voltage I will recommend you power it with VFD for power efficiency and good control over the speed you wanted.
Good luck.
Thank you Samuel!
I am afraid if I spin that flywheel with such a high rpm it will literally Fly! Lol
I got some other great comments on here and it convinced me to get rid of the belts altogether and go with a direct drive with a driveshaft or U-joint.
But yes I think your theory is correct!
Definitely will look into the variable frequency drive.
Sorry but changing the ratio or drive or controller will not change the fact that you will not get free energy (except if you can get free electricity to 'spin' your flywheel in the first place). At best you are building a mechanical battery with an efficiency of about 70% and an energy density lower than lead-acid battery... Sorry.
@@jcugnoni yes in this setup probably right.
This was only supposed to be the basic that I build my other strategy on it.
Will post a second video explaining more soon.
@@jcugnoni you are perfectly right at least to the present state where theory state perpetual motion machines doesn't exist. However, the target is to create one. Note that Loaded Electric generators at runtime produces a back EMF which is practically a breaking force in simple terms. The concept of the gear ratio is to ensure that the this force will always be less than the driving force, and if this is achieved then you can stay in motion else you'll Coast to zero speed.
Thank you for these comments
This is the best video i have seen of the videos for for generating energy. Great work Marcus.
Thank you James!
Appreciate it!
Thank you !
Im just really happy you saved me trying this .i too watched the indian vids and wondered mmm maybe .but then im sure electric car companies would be doing this . thanks guy !! i wonder if theres some way of adding a battery storage in there anything to bring power down utility costs.
Glad I could help Gene :)
I keep you posted if I find a solution!
Nice setup and detailed explanation. you have to use custom built PMG-enerator and that should produce more than double the energy needed to start your motor. instead flywheel you should use large wings with weights and you dont need that big stand you can keep motor or Generator down also. same i have tested with my prototype which is working. I used Ford car alternator with extra magnets added removing brushes and 12v motor.
Thank you very much Rudolph!
Do you have a video of your setup?
Would love to see it run.
@@MarkusNenning TRADE SECRET, Sure i will show once done with my final product. still i can share its details if you want to try. its not only Flywheel generator, but its a combination of PMG, induction, Tranformers with little circuit, My goal is to generate at least 5 time of what i use to run it
@@3107rudy I would be very interested to hear more about your project.
Gracias de parte mía y de todos porque si usted ya lo ha conseguido es lo que estábamos esperando todos, que una persona con cordura dijese que esto ya puede funcionar y que vale la pena invertir el tiempo hasta hacerlo realidad,
Muchas gracias
@@antfer5169 sí, está funcionando, solo para funcionar, pero no produce más energía. mi prototipo usaba un motor de 12v para hacer funcionar el alternador del automóvil. ahora estoy construyendo con un generador autoexcitado (PMG) con motor de 1200W
An excellent work. ❤Congratulations !
Thank you!
Can output be more than input by any means?
Thanks for sharing the video... Awesome knowing it's lapses..
Possible solution:
Make the alternator (generator) rotor magnetic... by attaching a physical magnet or from an external electric field
Great workmanship ! I would watch a video from you with any content, very understandable, precise, and clean ! Two thumbs up !
Thank you very much Martin!
Thank you for trying this!! Saved me time and money!!
You’re welcome:)
Thanks for watching Brad and leaving a comment!
Though Its in storage, I’ve got a collection of flywheels of many sizes. The smallest is to a singer sewing machine. The largest is three feet in diameter. One is mounted on a bearing assembly.
I have to say, I have to say I really appreciate all the hard work and honest evaluations you made on your project. I really like your design, the only thing I would change is your pulley configuration. Instead of all fixture pulley’s I would use at least one adjustable pulley like a centrifugal operated pulley that will automatically adjust to optimize the stresses on your motors and generator. I believe if you use one on the flywheel it will help to reduce the amount of stress on the overall operation of your system keeping it from over loading your breaker.
Thanks Alberto appreciate your kind feedback!
I did not know there was a centrifugal pulley I will have to look into that.
Thanks!
Very interesting project, I hope you can carry it out and it works as you expect, congratulations for encouraging those of us who are interested in this project, very important due to the high energy cost, apart from that it is significant to know that you have created it yourself.
Thanks Marcos!
How to Make a Free Energy Generator without flywheel! #FreeEnergyGenerator
ruclips.net/video/wqbJWBtoFMQ/видео.html
Your craftsmanship is well thought out. This system may not work, butI would build a second one with a much larger flywheel…
Thanks Phillip!
Thank you for educating me.
Thanks for watching!
if it goes for more than 12 hours all the chances to burn, it is not very good to use it continuously, but it is very good one built for 24 w for charging solar batteries, I work on it if I succeed I will put it on youtube
Buna ziua
Chiar va rog sa postați un video dacă va reușește proiectul
De 7,8 luni tot urmăresc video-uri de genu și nu sunt ferm convins ca e real
Mulțumesc
Try adjusting gear ratios to quadruple the rotations at the alternator. E.g larger pulley on the motor. Linked to a small one at the flywheel then a larger one on the flywheel to a small one at the alternator. See if a small rotation on the motor should give you enough to generate at the alternator. And have a chance to switch.
I will try that last one thing thanks!
Just received the pulley today but honestly not too hopeful.
Will have an update soon.
Thanks!
Thank you for your effort
Thanks appreciate it!
Exellent work there and your straight answer. I've always thought how can you use electricity to generate electricity.. with wind and water and solar yes
Thanks Killian!
You might enjoy this video I made about an American inventor then
ruclips.net/video/wqbJWBtoFMQ/видео.html
You need to loosen the tension of the belt connecting the flywheel to the electric motor so that it would not budge hold the rpm of the dynamo when the motor rpm glitches and drops. Same concept on a bicycle pedaling it clockwise runs the gear/wheel but dis engages when you pedal it counter-clockwise giving you freewheel momentum when the bike is running. It could also be possible if they could design a pulley on the motor side with a dis-engaging gears when the pully rotates in reverse.
Interesting theory
"Glitches"
In real life?
HOW!?
Yes I noticed the Indians were using a belt tensioner, and would adjust the belt as needed.
😏😏😏
Not allowed by thermodynamics. Friction and wiring creates heat, and the kinetic power will be lost.
What motor are you using?
Does it run consistently continuously? Once started will it gradually slow to a stop ? I inherited 75 Acres off of the Grid in West Virginia and I am going to do a little timbering to build a cabin and something like this would be awesome even a couple something like this
At the moment at comes pretty quick to a full stop. Hopefully with the next modification I have more success.
Thanks
A great job and nice setup. It's well known that we cannot create energy, what only we can do is convert existing energy from one form to another. And the conversion machines or systems are not perfect, efficiency always less than 100%. Your input is more than your output. Why this kind of machines never work.
Thanks!
If you have a chance check out my next video once posted where I go into this topic and question a few of the theories.
most of these new energy inventions are not creating energy, they are simply taping into new sources of energy through invented devices.
Sultannast your output is as bad as your input. Nothing like quitters. k eep that negative thought process to yourself. Someone give this guy some #methamphetamines🤭🤣.
@@JT-od7wq 😂
Finally a serious video !, I am playing with free energy since 10 years now ( i am a certified electronics technician )and, my best result was with gravity generator ( like william skinner ) i fully understood his system and ITS WORKING !. A flywheel is like a mechanic capacitor, aka it will accumulate the energy from the motor BUT you will store ONLY a part of the spent energy to run this flywheel....so its a 1to .7 ratio...you loose energy.....you will need a very effective motor ( like pmg ) to run the flywheel and in combination of a very effective generator too maybe you will have a gain greater then 2.....you will have to fight with friction,heat,back emf, to reach that level of efficienty.with a w.skinner system, a child can push a 200 lbs of weight with a finger and return to his initial position with the same finger push !! thats efficient... the problem with all the video of youtuber i seen was not the initial understanding of mr skinner........but justed a fade imitation ! its so simple but it took to me 5 years to fully understood !!
I will have to look Mr skinner up.
With your background and 10 years of research I hope you will give me your feedback also on my next video that I am planning about free energy.
I have some new ideas that are right up your alley would love to hear what you think of it. Hopefully I can get it done by mid Nov.
Thank you!
@@MarkusNenning OF course !, i will be glad and curious too to watch your further desing ! sorry for my english coz i am a canadian french speaking language...
@@topgun4229 no problem English is not my first language either
I loved the explanation. Well so this can work for sure
@@mwambabuilders No in this setup it does not work.
But I will share a few ideas that I think could possibly work in my next video.
Thank you!
thank you so much , i always knew it will not work, but wanted to test myself but could not due to financial issues. thank you so much - i felt like i did it myself and proved it fails - at peace with myself now.
You are very welcome!
Check out my next video in a few days where I show a system that does actually work but a completely different approach.
thanks for your efforts
You need modified car alternater not a fly wheel. A motor, Plus a surge protector. And a string. You will get 240v.
Хорошо сделано. Добротно все просчитано кроме одного, у маховика должно быть намного больше инерционной силы. Маховик должен быть в с перенесенной массой от центра. Но этого не хватит все одно. Нужен магнитый усилитель.
Но за сборку браво 👏👏👏
privet.
uvas opit iest ab etam temu?
vidna v komentare shtob vi ni daleko takovo mexanizma.
kak ti skajish, sdes rezultat bivaet?
eta realno ili ,,novie orniok,,?
spasibo zaranii.
valera
tbilisi
@@golaiagasviani6234 Здравствуйте. Да эта схема имеет шансы работать. Но маховик нужно масивнее и другой конфигурации, чтобы основная масса была распределена на его окружности, а не площади. Можно играться с редукторами. Но есть и другие способы.
@@vitaliyshatohin3793 privetstvuet.
gaspadin vitali, esli mojna, dai tvaio kontaqt pajalista.
LOGIK BOOK , eta maio feis adress.
spasibo
@@golaiagasviani6234 я Вас не нахожу
I would like to see you replicate the experiment with the same equipment as the other guys have done.
Well I wished I had that laundry of flywheel and generator available.
i made the same things but not works it works but after a little time down and stoped so plz help me what to do
There are some things I gathered in watching these videos over the years. One was that one belt had to be loose so as not to be directly connected to the flywheel. The other was that the generator had to be of permanent magnet type or modified to be such.. Thats all I remember. I see the loose belt concept being applied in several of the indian videos but am not sure if their generators have been modified with permanent magnets. I suspect that they are but they are not indicating such.. I did see one video long ago, that did indicated that the generator was modified.
Thank you 19999927
From my experience, if the belt is too loose it will cause a lot of slippage at startup and ruin the belt. I can see that a belt that is too tight causes additional friction. But if you have good bearings and tighten the belt using some guidance from the belt supplier it should be ok.
I think the main reason the belt is so loose in the videos is that the motor would stall because of the sometimes up to 400kg flywheels. Once they reach the required rpm sometimes you see that they tighten the belt up.
Claro el alternador debe de ser de imanes permanentes
.
@@MarkusNenning yes too loose belt will slip, but slippage at start up ok, that is why they use momentary on and off from the motor till the flywheel gets up to speed. belt tension should be as loose as possible without slippage when system is up to full speed under load. you can connect amp meter to see how belt tension affects amp draws.
@@rmendes2mendes915 good idea thank you!
@@rmendes2mendes915 its like when the buddha tried to play an instrument the hordes have to be just right in order to play a harmonious sound.
You are a very intelligent individual. You knew before you started that the concept was impossible to work. You got the most views ever because people are so easily led, and these posts promising free energy attracts them. I am subscribing to see what energy ideas you come up with. Storing solar energy in flywheels, micro hydro generators, and wind power generation systems all interest me. Like you I hope cleaner power generation systems are discovered and developed. Good luck in your efforts.
Thank you John very kind of you!
From what I learned in school I had my daubs from the beginning but at heart I am a total dreamer and optimist! :)
@@MarkusNenning I have a comment for you. Reed it please.
There not failure, just a problem waiting to solving,
Great job man
Thanks
Thank you!
You approached it the way I would have done and as such saved me a lot of money! so an idea maybe use a 12v motor to drive the dynamo, have a 12v car battery and a 240v charger for the battery etc ...and even some super capacitors. Use the pully size to match the rev's on the dynamo?
Thanks Mike!
I just got a used car alternator and will try something similar to what you mentioned.
As far as the capacitor goes I have daubs that that works. I talk about it in part 2 why I don’t think super capacitor would work.
+they are pretty expensive 😬
This is exactly how science should be done!
If you see something or have an idea, you should have a go at it...
Personally, I have thought about trying this myself, my train of thought was more along the lines that the motor needs to be low voltage and high current while the generator needs to be high Voltage and low current.
The reason behind this is that I believe the more current is drawn from the generator, the more load is placed on the motor.... But I'm thinking of a DC system where I can use the high voltage and feed it into an mppt charge controller to convert the high voltage low current like from solar panels to a low voltage and high current to charge batteries and or drive a DC motor....
So theoretically, a charge controller or DC to DC converter does all the heavy lifting instead of the generator being loaded down....
You also need to make sure that the motor doesn't use more watts than the generator is putting out... Maybe a larger pulley on the flywheel shaft to the generator to get it's RPM up sooner? Not sure if that would make any difference but I would imagine that a pulley is cheaper to purchase to play around with different sizes than anything else... You should be able to see instantly if going larger or smaller is making any difference at all and possibly get a look at which way you need to go....
Looking forward to a follow up video on this project...
Thanks so much Peter!
Interesting concept with the high voltage idea.
I just posted a follow up.
And yes 100% agree try out everything yourself instead of believing what was set as laws 200 years ago.
You need modificate the routor with magnets to produce stronger magnect field. After you need to sincronize the rotation frequency of the generator with moutor . In the timing of generator produce the eletric impulse , the moutor must receive this same one in the same time .
The generator and moutor must be in phase .
you have fallen for it........ruclips.net/video/otjvUz7qKXc/видео.html
@@trillrifaxegrindor4411 it s very good video.
If I not in mistake I had seen it.
But , I have one too.
Take look at this .
ruclips.net/video/h8tuufTM9Bg/видео.html
Nice and tru
Well done, great project.👍
Thank you Mohamd
Brilliant video thank you 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Thank you very much Brent!
Keep up your work! Remember for each trial run you have, you are one step closer to finding the solution you seek.
Thanks Dean!
Hi !
Use proportional ratio 3 6 9!
3 to the motor
6 to generator
9 to flywheel
For the system use 1 2 3 ratio
For ex. motor 100watt, generator 200watt,
flywheel 300watt stored in cinetic energy...here you have to make some calculation acording to the speed of the flywheel you have to reduce weight in the way you can store 300 watt
This is just an example blueprint for the entire system ...as long you respect those ratios you can increase the power of the system !
Use thik cable...do not use automatic fuse betwin the generator and motor...will cut the amperage and voltage ! spin the system with other motor until reach the nominal speed !
You can use automatic fuse out of the system!
The average extrapower is 3 to 1...that mean for an engine with 100w you can create 200watt extra...100watt from an total of 300watt it is consumed by the engine itself !
Thank you for that info Bogdan!
@@MarkusNenning did it work?
@@barnabalint387 unfortunately not yet.
alternator 30kw jaki elektryk motor how power used
Excellent video, mind-blowing workmanship, true engineering masterpiece. Thx. A lot .
Thanks very much!!
Hey that was a beautiful machine rig you built/.
Thank you Joseph!
I really wanted it to work! Could have charged my car with it!
I really wanted it to work too! :)
I build one here in Florida main is working
What do you think about feeding the motor with solar energy every x time so that it doesn't stop? Let's say that it would be a safer alternative, sending impulses to the engine together with the flywheel, it would spend very little electricity, but that way we would be able to get a higher production, in the alternator.
Or waterwheel assist.
Yes I have thought about that and still believe that is a good idea.
My plan isn’t to build a perpetual motion machine. I just want a more sustainable way to produce energy.
Thank you!
It would be a bigger loss ... how do you compensate in cloudy weather, fog, at night? to compensate you need at least 2.5kw, right? in this case, install 8 photovoltaic panels with a 3.5kw converter and 3 batteries of 240A each. And you don't have to bother with this project anymore.
@@MarkusNenning ruclips.net/video/KnDe79N5_5s/видео.html&ab_channel=Mixr%2Cblendingideas
@@gabironl thanks!
Increase the angulebof the weights thus maintaining pro performance with this generators is all about the angles
These people from India does not try to scam anyone, they make it work very well with an low rpm magnet generator