You can dispute the video but you can't dispute the engineering science. It's very simple, the power to turn the alternator comes from the flywheel. The heavier the flywheel, the more time it takes to stop it's rotation if the power from the electric motor to it is stopped (newton's law motion) and as far as the flywheel keeps turning, the alternator will generate electricity. This electricity repowers the motor and the cycle continues. If you unplug the motor, it will take about a minute for the flywheel to stop turning therefore your alternator will be generating electricity for that time. Do your calculations right and you will get it right.
I think if you start the flywheel and the generator with a separate motor off grid power and your generator output is more then double of the current needed to run your starter motor you should be able to start and get up to speed then unplug from the grid and take power from the generator and then run your motor on that generated power and keep it going and use the remaining watts as free energy
Try to make a sample thing and conform that it was fake, sitting in a room and don't say it was all fake, I want your proof of making a motor generator
Electric motors are max 85 percent efficient. So the generator will also be 85 percent efficient. You dont have to build it to know its fake. The machine wont run for long without mains power. There is losses even in the bearings and pulleys and belts. .
So, rather than study shadows and footprints, did you build one of these to test and see for yourself. In the US it would cost under $1500 to build one that is 7KW to 10KW with a 2HP motor. Make one, test it and shoot your own video on a concrete floor. Let us know how you do.
Why prove something that is 100% bunk? It defies physics and certainly isn’t being done by junk yard parts. If you understand electrical theory then you’ll know that this will not work
A thing to note is it is called a "Theory" for a reason. There are a few things we have discovered that defy physics and science as we know them, so we need to expand our understanding. But yes, the best way to disprove something is to also build one and verify if it doesn't actually work.
This guy is being paid by the power company to say that this is FAKE. Like you said build it yourself and test it. If it is so FAKE then then the backup system I have for my house from Generic is also FAKE. Only thing I will have to do is to replace the gas engine with an electric motor and have a power source to keep that motor going. Solar power should be FAKE also. Yes in the USA you can buy the Gen. Head for less than $4000, Electric motor is $300 - $600 for a 3HP to 5HP 3 Phase motor.
it's not a fake. they work. it's just that people gossip first than try to do it. because it takes ingenuity, manual skills and a little money to invest. new wind generators cost but make this possible. and all a balance of different factors. c and to work a lot and do tests. choose the right components .. the generator must perform at low rpm .. max 400 rpm .. the secret is in the kinetic energy that gains weight. and here too we need to do tests on the number of revolutions. change pulleys, weight, and create a balance between the energy accumulated by the flywheel and transferred to the generator which in turn powers a smaller engine. it is obtained with calculations and tests. it must turn stronger than the generator and only with the pulleys reduce the revolutions appropriate to the generator. so every generator, every drag motor will need testing. there is no manual. the flywheel must be heavy yes, but wide ... it must accumulate kinetic energy. they work but you have to do a lot of tests. people think they can find the news or the explanations without lifting a finger .. try, sweat, work, invest instead of just sitting keyboard lions .... systems like this however are not enough .. not stabilized. protection stabilizers, for voltage and hertz .. for safe use. in order not to burn anything in case a belt or bearing breaks, it slows down the revolutions. you have to use your hands and get dirty, work hard to make them not talk and that's it. no energy is created. it must be supplied when the system is started up and the best balance must be sought between production and consumption and friction losses with multiplication of revolutions and the accumulation of kinetic energy. before shoveling ... try to build them ....
تو واقعا یک عقب مانده .بیماری بجای امور فنی وبررسی این ژنراتور ها ابتدا به یک دکتر روانشناس خودت را نشان بده . چون وقتی دانشمندان گذشته هم گفتند زمین گرد هست وبه دور خود وبه دور خورشید می گردد .تعداد زیادی بیمار مثل تو حک، اعدامشان را دادند .ولی زمین چرخید وچرخید تا به امروز بیچاره بیمار .مهندس صدفی ا .چون نمونه ژنراتور را در اختیار دارم وبرق تولید می کند با هما ن، تکنولوژی .واندکی تعغیر .
Before you bashed peoples invention go do some research it works the generator powers the motor and the motor rotate the flywheel and the flywheel with its weight rotate the generator just like hydroelectric the generator head connects to a peltron turbine which the movements of water push and the generator generate electricity which is step up and distributed by a transformer and then step down to the recomend voltages for commercial uses I know that these generators banned in some countries because they want peoples to pay the big companies to go on thair grid but this thing is real trust me
Before you prove this as lie, study mechanics of machines very well. There are topics that will open your eyes to this reality. However if you are not a mechanical or a technical man with some theoretical knowledge, your argument might be in want of acceptable facts. No man with an average knowledge of mechanical or production engineering will venture to prove that flywheel energy is fake.
The concept of spring generator is good, however there are some inherent flaws, these flaws can be resolved, need a trail and error to refine , as you have explained these are used in industries , there are some improvements required. 1. The Spring generator with 8 springs at 45 degrees each is a good design for running heavy alternators to produce energy, even the flywheel to be heavy and in equilibrium with the springs tension, need to take high quality springs, how this works is when it rotates an alternator it produces a desired energy, and from that same energy , we need to add a motor to rotate the flywheel whenever the flywheel reduces its required spin the motor will support the rotation , few electronics are also required to take into account like speed sensors and automatic switches when the speed reduces the motor will spin the flywheel to compensate the loss and when inertia acts and makes the flywheel to run at the desired speed the support motor will just rotate without power. means to make the spring generator successful we need additional inputs and use of electronics and some variable frequency drives... to help the world the get energy....
When load is connected, the alternate resistance increase due to magnetic fogging, motor should slow down depend on the load. I done before. But not follow the same method. I using alternative + 24v brush motor, load 500w spot light, the resistance is very high.
I believe with the correct components it is possible. A permanent magnet generator producing maximum output at 500 RPM with a 3 to 5 hp, 2000 RPM AC motor a 100Kg flywheel plus the correct size of pulleys and a proper starting system it will work. Allow it to develop speed and full output before applying any load.
Sorry Majid, unless you make one yourself and proove it fake, I feel that you are fake news, l have begun to make one myself. If I cant get it to work I shall concede and stand by you but till that time, picking holes in other peoples videos claiming its fake is bad jujus. Good luck with your karma.
As a Physicst it is well understood that production of power energy through flywheel is possible, production of power through this system in the video is very possible. Gasoline generator uses the same protocol, the only difference is the mechanical aspect. You are an engeer too, you should go ahead and put an experiment of this into test to see for your self.
La energía libre no se ha hecho porque nadie a insistido, el único problema de la autoalimentacion (generador impulsado con motor de meno hp) radica en la fuerza contraelectromotris de los generadores, pero esta se puede llevar casi a cero si cambiamos el materia del rotor, podemos hacer rotores estrictamente magnéticos con base de teflon y solo el eje central de acero.
These men have taken their time to showcase their ideology to the world to see and a scientific or technical knowledge. If indeed you find it false then you must show the world practically why you are proving them wrong.
Idiot have you ever been to a university and studied about mechanics fundamental? Friction and other constants are the reason free energy cannot exist or you mistakenly took flywheels as mechanical rotational battery which are totally different. It generates as long as it rotates nothing is free. Conservation of energy.
Your argument is weak. You're merely makeing an assumption based on elemental factors outside the experiment. To porve the experiment is false you would have to recreate the model.
@@anythingoldmechanical free energy is not possible in closed systems. it is possible in open systems. Then it does not violate the law of conservation of energy. The transformation of a closed system into an open system is what is not learned in university. how it is done can be seen in the work of daniel dingel. joe cell, ed gray etc.
Firstly , those who say these set up doesn't work, study your physics properly... There are some information you are not able to digest , first thing, there is nothing like free energy, it's all a layman's simplified term on a complex process. There is no extra energy here, only extra electrical energy... Law of conservation of energy states the total energy before enacting into a process can't exceed the total energy of the outcome of the process. Simplified statement is total energy before input is always equal to total energy at output at any point space - time. This is understood only when you are reading about nuclear energy output calculation. It's like we have infinite energy that is not directly interacting with outside world at every point in space - time. This energy is the total energy. Since the every point in space is always connected to each, when the energy in one point is absorbed via magnetism ( a form of energy from space, that's having it's property when interacting with matter, either it be electron or any), the magnetic energy is converted to electrical energy and used ( depleted) from one point of space and replenished at another point of space, so totally the work done part is always seen but the actual process is not seen. The replenished part of space actually neutralize the depleted part, so energy in the form of electricity is used and given back. Maybe you can understand it via the term quantum energies. The intangible energy from which we are able to extract this electrical energy is from sub atomic scale.
@@noblet5162 hydropower is from water, there is a visible source of electricity generation. well all i meant is the term free energy is just wrong. one form of energy is transformed to another, when one form drains, the drained form gets refilled from point space, so there will be no loss, this is the basic of electricity multiplier, from base of 20 watts, one can even generate 200 wattage power, that is all not even abiding any laws of energy or momentum.
Trying to reinvent the wheel- running in circles😂 Mazda copied the bent pyramid and flower of life and came out with the rotary motor - more power more efficient- but they couldn’t perfect it and scraped it
OK I GOT UR POINT...SO WHAT IF U THINK THEIR INVENTION IS FAKE WHY MAKING A VIDEO? IS THAT MAKING YOU AN EXPERT OR POPULAR? SHAME ON YOU MAN!!! THOSE POOR PEOPLE WONT WASTE THEIR TIME INSTALLING THISE BIGASS MOTORS RIGHT INFRONT OF US AND THEY DONT EVEN SALE THOSE THING...... U JUST PROBABLY ENVY THEM CAUSE THEY ARE SMARTER THAN U...LOOSE THAT ATTITUDE BRO I FEEL SORRY FOR U
Please, my question is; if the motor is powered with another supply, and the alternator spinning at required rpm and generate electricity, now without disconnecting the supply source, can the supply from alternator side be utilized?
Esta energía libre si se puede generar, el trabajo de la volanta es el que hace que esto funcione, el peso de la volanta es quien sostiene los rpm para realizar el cambio y posteriormente ayuda a sostener la presión cuando se le pone carga al generador, por eso ahí que tener en cuenta los consumos y generación de energía si un motor de 5 hp consume 5 kw y se le pone un generador de 12 kw a 1800 rpm quiere decir que quedaría un promedio de 5 kw para consumir
@@mameaden because you like limited energy sources that you make money off of while the planet goes to an offensive Brigade for things like fossil fuels lithium ion elements as such
Parece que a las personas en esta sección de comentarios les gusta ganar dinero con fuentes de energía limitadas que se agotan y no se preocupan por quienes la necesitan pero no pueden pagarla.
@@anticorporatists9959 no, it's because people like me have seen people building these and failing, it's because we, contrary to RUclips warriors cared enough to give ourselves basic electrical knowledge
Do you have an opinion on Thomas Beardes (RIP) Motionless Electronic Generator. Its works cycles based on a tipping point principle,only requiring input that is mostly recoverable.......
Nigerian scam : im wealthy African prince but need some money to unlock my wealth Indian scam : i will sell you a generator that works forever !hhhhhhhhh
Sure, and I bet you believe your barber as well when he says you look good. These dudes in flip-flops should stick to worrying about my cars warranty...
I really don't see the point of criticizing other people's work or innovations with out trying them out I have done it and it works perfectly well, it's not always about getting likes and subscribers you know
Hello, in your video we have seen nothing convincing, you have only spoken, what you accuse of fake is something that others have shown you too we must demonstrate by practices that it is fake and not by words In life it is not all that we believe that is true, sometimes reality escapes us, we must prove that these videos are false by proving what they hide from us
@@Energygraphy I don't have a video, what I say is simple you can't sit down and just say something is wrong without showing us convincing evidence, between the others and you they are more or less convincing than you because they show something that seems to be true, to go against them it is necessary to spoil what they have done and show that it is necessary
Majid Elabi, your video is nothing but your own personal commentary on someone else's invention, which you have an elementary and primative understand about. Sorry..😪😪😪
You should title your video " how to pull energy from a vaccum" that way you will get millions of views trying to show a bunch of flat earthers that free energy is impossible.
A retro alimentação de um motor elétrico pelo gerador acionado é possível sim!! desde que seja calculado adequadamente, o aproveitamento da eletricidade gerada é bem inferior a capacidade do gerador é claro, MAS É VIÁVEL o aproveitamento parcial! NÃO É FAKE ISTO"" para se afirmar isso tem que ter embasamento técnico, e conhecimento sobre geradores!!
the purpose of a flywheel is to smooth out the load on an engine or motor from sudden surge, they in no way can keep a motor running from an electric generator powering both the drive motor & load. what you could do is build a fancy pulse battery charger in-which the motor ran off a pulse circuit would keep the motor spinning at a set RPM turning a generator charging a battery, now if you then powered the motor off that same battery it would merely extend the battery life as the motor is not running continuous, it would not be self powered for creating free energy you need to move out of the realm of kinetic & electro mechanical devices & move into the realm of room temp superconductors thus building a device that starts producing usable energy as the temp rises above 0 Kelvin so in theory if you could build a unit the size of a high efficiency gas furnace & use that to heat a room to 70 F fill that room with more units the same you could generate enough to power a small town. in reality the aim would be to build 10000w output units for every home that generated power at ambient temp.
Look dear, There is some waste in energy created by transferring the flywheel rotation inertia to Energy, but still there is a huge energy remains ,you don`t know about rotation of alternator ,very few RPM rotation in new magnetic alternators models in 2018 now is producing high energy, this is what made the electrical generation easy to gain by slow rpm of new alternators, Look to the wind energy, its just to rotate a shaft you gain 1000 watts ,I don`t think what you said about fakes in generation of fly wheels power, it`s not fake my dear inventor you better change your ideas and thoughts, soon you will be found that you are creating a fakes information, This is areal idea and it`s giving power supply, sorry if you find my comments little rude
Please... Can you show us video which is authentic video for free energy Electricity using AC Synchronous Alternator, Electric motor and Fly wheel as SELF RUNNING GENERATOR? i have serious interest in this generator because i want to donor this generator for small village as a free project for the village .. i have watch alot video, am right now confuse.. help out
Idk, takes very little to split an atom and those release enough power to eradicate cities, so comparatively, the "Reaction" can be far greater than the "Action".
@@greyfireocelot6140 but the atoms splitting give off equal amount of heat for the energy used. Actually LESS heat once you factor in entropy. It just happens 10s of billions of times in a relatively condensed area so it seems like one action one reaction. But its like 75billion action and reactions. Im guessing you arent a nuclear physicist?
It’s 100%real the generator makes electricity for the motor and you can have a trickle switch to make it speed up and then disconnect the power it will continuously make power on its own
they did it wrong LOL, the right is ( motor - flywheel - motor ) the third motor will be the generating one |__ motor the 2 motors above is both connected to each other, the 2nd motor powers the first one you know the first one uses energy to spin but it receives actually lesser energy generated from the 2nd motor, so there is the flywheel the purpose of the heavy flywheel is to maintain its RPM.
@@beeman1246 and you got to understand this that limited energy sources are what runs out when it runs out you have to buy more just to function the energetic needs no more limited energy sources that's what's needs to happen otherwise will all be doomed
1) Watt In ... Watt Out ... 2) If I press "brake" - demand Watt ... the flywheel will take the energy for a while ... but if I press continuously the "brake" - demand Watt I will stop the Flywheel-Generator after some time ... more heavy the Flywheel more time to stop ... But Also more time to start from 0 RPM to 3000 RPM that need the Generator and so I will spend more power to achieve that RPM Like the car when you press the brakes ... hybrid car Electric and Gas ... when you press the "brake" this work as a generator to charge the batteries ... but if you insist to demand more watts for the batteries the car will stop . Some video looks so real but in videos they can edit them as they like it ...
Curious. 1500KW motor with 10,000 KW Generator is like a slight touch of the brake pedal. With gear reduction of motor to flywheel and overdrive of flywheel to generator, wouldn't the inertia of the 75 lb flywheel maintain the rpm? I think I will build one and find out!
As Engineers I was suspicious as you But I came to understand that some of these device works great but there's a big secret One day a Tanzanian man announced to the govt to have the device and a man is now in the hand of govt. U need to make a research on the parents they use Many people are using low rpm PMG to hit that value as normal as you you won't get it
Einen waschmaschinenmotor habe ich ausgebaut und der läuft schon bei 5v keine Ahnung mehr wieviel amper es genau waren. Er läuft mit einer 9v Batterie schon wunderbar zudem kommt hinzu, daß eine Waschmaschine ein Schwungrad besitzt klar die Wäsche (Inhalt) bringt ein ungleich Gewicht. Deswegen ist eine Waschmaschine ja auch so schwer damit sie nicht gleich weg fliegt. 😆 Also bullshit wird ich da nicht sagen, eine Waschmaschine sollte eigentlich nicht so viel Strom Verbrauchen. In Deutschland werden vermehrt schwungradenergiespeicher gebaut, Vielleicht noch nicht ganz richtig verwendet jedoch ist man sich bewusst das kein gewöhnlicher kondensator so gut Schwankungen im Stromnetz ausgleichen könnte.
How did you conclude it's a one kw generator. Have you taken the energy stored in the flywheel. See Dr. Chaganti Bhaskar videos and his patented model of flywheel generator. He has proved it. Ideally don't try to prove yourself without scientific backing. Come out with numbers or recreate the model and show us why.
Se colocar volantes pesados funciona sim, depois que os volantes entram em rotação eles farão a mesma força que a máquina de um trem puxa centenas de vagões.
@@Energygraphy sir what about using a 3hp DC MOTOR with high RPM AND HEAVY FLY WHEEL I think it can work them because you charge back and use same energy
I don't think that is fake! The person is using an electric generator and i know for a fact that an electric generator produces electricity, it's not fake! 🤔🤔🤔
And why would they take so much trouble to make only fake machines? They don't even sell them. I do not think it is pure falsehood. The energy probably dissipates soon, though. In other words, it works for a short time.
This is simple logic before you move to the next step . A 1 hp motor are used in 3kva genenerator that is 1 h of either petrol or disel or even electrical motor. 1 hp is equal to 0.75 kw so by using 1 hp you will be using only 0.75 kw of 3kva out put
Bro I can tell you for free that,this work very fine,cuz the motor used are also used for heavy iron cutting is factories,,and the alternator,big enough to power two homes..so do ur finding properly before condemning...
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.
so you have watched many of these videos and say most of them do not work. then you would know this by visual only. it's something you can see that tells you they don't work. cannot be special way the motors or generators were wound because you cannot see that. cannot be the weight of the masses because you cannot know that by sight. so is there something missing that one would be able to see ? and because its not there you know they don't work ? I think these can work and here is why: the generator must be sized large enough to provide sufficient power to operate the drive motor and have enough excess power left over to run other things. then the drive motor must be sized only large enough to spin the flywheel and generator together with both operating at their needed rpms. the gear ratios must be set as to not exceed the drive motors run efficiency wattage rating. the flywheel mass must be sufficient enough to act as a buffer, and to keep the generator spinning fast enough in order for it to output enough power to keep the drive motor going for a certain length of time when there is no external power available. and the device as a whole requires tuning between components and gear ratios. I dont think you will have much luck finding financing simply because any new energy technology usually gets shut down by big business especially the energy business. we are not allowed to market anything that upsets the status quo. best to just make the device, perfect it and sell them here and there. forget about advertising or social media sales.
I want to create a clean energy system for a cleaner world. No mechanical wheel system whose angle does not change can produce energy. No system will work against the laws of physics. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to realise this project in any country that will support me.@@rmendes2mendes915
@@rmendes2mendes915The electricity produced by magnetic systems is insufficient. If you ask a physicist or electrical engineer about this possibility, you may hear that the static field cannot produce an electric charge. This is true. But the Earth's magnetic field is not static. It fluctuates, and it is these fluctuations in the magnetic field that are likely to represent a source of energy. Gravity and the magnetic field are complementary. Only their direction and function are different. The force travels from the earth's core to its extremities. When it starts to jump from the extremes (N/S) into the vacuum of space, it weakens and turns into magnetism. Nothing can be created out of nothing. The force of gravity (gravitation) fed by the natural magnetism of the earth must be used. There is no harm to the environment. When the system is working, the forces only change places. The angular system provides force transfer by using the gravitational force, which surrounds every part of the world and is constantly renewed, at different rates from different angles. It is just like the transmission of electricity to another area by means of a cable. There is a large gain in force at the feed angle, but a small amount of loss occurs at the trigger angle. This angle is fuelled by the force of gravity. Energy losses due to friction are present in all systems, but this does not affect the result. If we define the system, we should sort from large angle to small angle. From the end of the force to the beginning. The main power source is mechanical. The electronic system complements the mechanical system and the software controls the system. The wave frequency of the earth does not damage the device. The device works with a robotic wheel system that changes the angle of the magnetic wave frequency in the mechanical direction every second. Whichever wave the gravitational force comes from, it will enter the angle of the robotic wheel. There is no escape from this. In the mechanical wheel system, the trigger angle at which we lose energy is 50 per cent smaller than the feed angle we gain. The source is the force of gravity. There is a magnetic force in every cm2 of the earth. This magnetic force is constantly moving and the flow is renewed. Therefore, as the speed increases in electric motors, the amount of energy received per cm2 increases. According to this principle, the realisation of angular resonance is possible by changing the force points. Again, the question is how much energy can be generated from them.
@@rmendes2mendes915We can use Faraday's law to generate this quantity and the answer comes to something like 3.14?10^-9 volts (three billionths of a volt) per m2 of magnet surface, utilising the flux. The answer seems to be that while energy from the Earth's magnetic field is technically and theoretically possible, it is not possible to generate it on a significant scale or to generate usable amounts of power. It is not possible to convert the force available on the fixed axis into usable energy. Systems such as the Lenz, rotover and flywheel are vibratory resonances. It does not produce sufficient commercial power. There is no angle change in such devices. Efforts are being made to generate electricity from vibration resonance, but this is not possible. Because there is no angle change and torque in vibration resonance. The next resonance always consumes more energy than the previous resonance. Some people also use magnetisation, which is also not possible. In order to generate energy, the production and consumption angles in a system must be seen from the east. All electrical devices invented in the history of technology work with 2 or more energy angles. For example, no device (vibration resonance) works with only neutral without phase or only 1 phase without neutral (energy transition angle). It works with 1 phase and 1 neutral (energy transition angle). Works with 2 phase (energy transition angle). It works with 3 phase (energy transition angle). The angular system, which works without using fossil fuel, produces electricity with the same principle. It realises electricity generation from 2 different mechanical angles (movement resonance). These 2 different energy transition angles are clearly visible. The law of physics explains exactly this. Closed systems are contrary to thermodynamics and do not work, but there is a difference of opinion about these systems. The definition of closed systems is not yet fully understood by scientists. If you go straight on a 1 metre road, draw a circle or go up steeply and return the same way, no matter which vehicle you use, you will never gain any energy in this work. In such systems, electrical energy with commercial value can never be produced. If you want to make a profit, you need to change your return path, your distance. You need to switch from a closed system to an open system. No fossil fuels are needed for this. A usable angular energy corridor is needed. All the anonymous projects analysed are closed systems. They run on a single-stroke engine system and do not work. An efficient system must have at least 2 or 4 time principles. Just like a fuelled engine. Intake, compression, combustion and exhaust. The production and consumption aspects of energy must be separate. Energy can never be produced and consumed in the same cell. The chambers (angles) must be separate. The principle of operation of the fuelled system and angular resonance is basically the same. Systems that do not change with angle are closed systems. Just as the principle of a single-stroke engine does not work in fuelled systems, it does not work in non-fuelled systems that do not change angle. Solar, wind and wave systems work according to the 2-time principle, but their commercial efficiency is very low. Energy production and consumption angles are different. Numerical and visual formula technique should be analysed at the same time. Accordingly, you cannot give more energy than you receive. Continuous losses occur. These losses vary according to each system. The important thing is which type of energy can be used correctly and where. This is why angular resonance is needed to produce enough kinetic energy. For example, gravity is a force, not energy. In physics terminology, force and energy are not the same thing. Force is defined as a quantitative description of the interaction between two physical bodies, such as an object and its environment. Force is proportional to acceleration. Mathematically, force is the derivative of momentum with respect to time. Energy is the capacity of a physical system to do work, and work is defined (in computational terms) as the integral of force over a displacement distance. It is applied to move an object away from a certain distance. For force to be energy, it must be applied to an object. Force cannot exist without energy. We can modulate this force by applying more energy. The resulting energy is less than the total energy expended. You just convert it into a different form. During the Earth's rotation around itself (self-rotation), since the gravitational force from the sun does not create a torque, the angular momentum of the Earth remains constant because its carrier passes through the centre of mass. Therefore, the Earth's rotation time remains constant for 24 hours. Conservation of momentum in a system of bodies. In the case of a system of bodies, Newton's second law of rotational motion has the form = image. From this relationship it follows that if the algebraic sum of the torques of the external forces on the system is zero, the angular momentum of the system is held constant.
@@rmendes2mendes915ANGULAR RESONANCE ELECTRICAL SYSTEM (ARES): To create a kinetic energy corridor requires a robotic wheel system that can change its angle. Energy cannot be created out of nothing, it can only be transformed into each other. There is no violation of the law of thermodynamics. Many physicists think that kinetic energy cannot be obtained except in systems such as wind and wave energy. This is wrong. Kinetic energy is obtained by changing the resonance angle. This system is not a closed system. It is an open system. Scientists will realise that it is an open system after seeing this project. We cannot see the wind with our eyes, but we accept that it exists as a factor. We cannot see the energy corridor of a magnet, but we accept that it exists as a factor. We can measure these values. The scientific world must develop a method that can measure kinetic energy over time. After this system we have produced, scientists should also take the trouble to produce a device that can measure kinetic energy. The answer given by scientists regarding the measurement of kinetic energy is that you cannot measure kinetic energy because it is relative. It depends on the speed of an object, which is relative and cannot be measured as an absolute value. There is no power limitation on the growth of the device. It can be produced in the desired size. For 1 mgwatt solar panel, an average of 12000 - 20000 m2 open land occupation is required. I plan to make 1 mgwatt in 100 m2 with the angular system. You need to store solar energy in the battery to use it at night. In the angular system, there is no need for internal battery (energy storage) after the first movement. There is an instantaneous production and consumption system. 7/24 constant energy is received. The robotic wheel uses the force of gravity in the most efficient way by moving and changing its angle. For this system, sensors are needed to change and start the angle of the wheel at a maximum speed of 0.5 m/s. These sensors can already be produced with the desired sensitivity. Every part of the system is mobile. At each point there is a resonance element that changes the mechanical angle. The angular system consists of at least 6 cells. They are mounted on top of each other (solar panels cannot be mounted on top of each other) and connected in parallel. If preferred, it is also mounted side by side. There is no drawback. If mounted on top of each other, an average of 10 kw energy is produced in 1 m2. If it is not preferred to be high, it is mounted side by side and takes up more space. Each cell generates electricity independently. There is no mechanical connection between them. There is a parallel energy connection. Energies are combined in the transformer. In angular resonance, there is movement but no vibration. ANGULAR RESONANCE ELECTRICITY GENERATION HAS 3 BASIC FACTORS: 1: The phase of change of direction of the angle in a split-second time. 2: The stage of reaching the maximum in momentum. 3: Rotation phase in resonance.
The best way to prove a point is to build 1 of these Free Energy Generators yourself using a flywheels, an electric motor and an alternator. I can fund the materials for you. If it doesn't work, then you're free to come here and speak against it. I don't like Theories, but Self Practical Proves....
Yes, research always gives us the best results, But this is not research. I will soon build a model of it and prove that it does not work scientifically. And these people did not say that this is research, they said that it works.
In case you wish to make a real overunity machine where flywheels are included let me know in reply on this comment. I will tell you what to do. I do not have a time or place to make test.
If these people could make free energy then they could mount this to an electric car and make a video about that instead, how about a free energy car and plane and then they can record that...Now that would make a viral video... They can't, because they are recording this plugged to an extension chord. Why would the whole planet be spending billions trying to make a fusion power plant when we could hire these guys to build us a free energy flywheel in every home instead... And for all those self-degreed scientists and engineers saying "oh build one and see if it works"... no... you build one, spend money on a bunch of motors and spend your time building this thing, then think to yourself, "well, I must be doing it wrong because I saw those guys made it work somehow so it must be real"... And then spend the rest of your life trying different sized motors and flywheels... have fun with that...
Things are improving all the time in electric generation but people are still stuck in the past of you can’t change things of the sky will fall in and Profits will fall , If you don’t like it don’t buy it …..simple.
![Natanael Cano - Amor Eterno [Official Video]](http://i.ytimg.com/vi/EO4prCs6WpM/mqdefault.jpg)
ruclips.net/video/2EaZHAkipGo/видео.html
☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️☝️
My Start-up generat electricity with snow
Ill believe you when you make Lou Brits and john christie machine
You can dispute the video but you can't dispute the engineering science. It's very simple, the power to turn the alternator comes from the flywheel. The heavier the flywheel, the more time it takes to stop it's rotation if the power from the electric motor to it is stopped (newton's law motion) and as far as the flywheel keeps turning, the alternator will generate electricity. This electricity repowers the motor and the cycle continues. If you unplug the motor, it will take about a minute for the flywheel to stop turning therefore your alternator will be generating electricity for that time. Do your calculations right and you will get it right.
I think if you start the flywheel and the generator with a separate motor off grid power and your generator output is more then double of the current needed to run your starter motor you should be able to start and get up to speed then unplug from the grid and take power from the generator and then run your motor on that generated power and keep it going and use the remaining watts as free energy
Try to make a sample thing and conform that it was fake, sitting in a room and don't say it was all fake, I want your proof of making a motor generator
Ok
But it wasnt fake but also not perfect but it works for me it gave an idea
@@jacksparrow1159 send me a video of your machine.
Somenoe is saying something is fake without proof.
Electric motors are max 85 percent efficient. So the generator will also be 85 percent efficient. You dont have to build it to know its fake. The machine wont run for long without mains power. There is losses even in the bearings and pulleys and belts. .
So, rather than study shadows and footprints, did you build one of these to test and see for yourself. In the US it would cost under $1500 to build one that is 7KW to 10KW with a 2HP motor. Make one, test it and shoot your own video on a concrete floor. Let us know how you do.
Best logic ...
Why prove something that is 100% bunk? It defies physics and certainly isn’t being done by junk yard parts. If you understand electrical theory then you’ll know that this will not work
A thing to note is it is called a "Theory" for a reason. There are a few things we have discovered that defy physics and science as we know them, so we need to expand our understanding. But yes, the best way to disprove something is to also build one and verify if it doesn't actually work.
This guy is being paid by the power company to say that this is FAKE. Like you said build it yourself and test it. If it is so FAKE then then the backup system I have for my house from Generic is also FAKE. Only thing I will have to do is to replace the gas engine with an electric motor and have a power source to keep that motor going. Solar power should be FAKE also. Yes in the USA you can buy the Gen. Head for less than $4000, Electric motor is $300 - $600 for a 3HP to 5HP 3 Phase motor.
@@jonboatnationandstuff3301 try replacing the gas motor with an electric one and let us know how it goes. Good luck
Also it’s easy to hide wires in dirt. Many of these videos play some machines on dirt. The smaller ones probably use batteries so I don’t have to.
fax
it's not a fake. they work. it's just that people gossip first than try to do it. because it takes ingenuity, manual skills and a little money to invest. new wind generators cost but make this possible. and all a balance of different factors. c and to work a lot and do tests. choose the right components .. the generator must perform at low rpm .. max 400 rpm .. the secret is in the kinetic energy that gains weight. and here too we need to do tests on the number of revolutions. change pulleys, weight, and create a balance between the energy accumulated by the flywheel and transferred to the generator which in turn powers a smaller engine. it is obtained with calculations and tests. it must turn stronger than the generator and only with the pulleys reduce the revolutions appropriate to the generator. so every generator, every drag motor will need testing. there is no manual. the flywheel must be heavy yes, but wide ... it must accumulate kinetic energy. they work but you have to do a lot of tests. people think they can find the news or the explanations without lifting a finger .. try, sweat, work, invest instead of just sitting keyboard lions .... systems like this however are not enough .. not stabilized. protection stabilizers, for voltage and hertz .. for safe use. in order not to burn anything in case a belt or bearing breaks, it slows down the revolutions. you have to use your hands and get dirty, work hard to make them not talk and that's it. no energy is created. it must be supplied when the system is started up and the best balance must be sought between production and consumption and friction losses with multiplication of revolutions and the accumulation of kinetic energy. before shoveling ... try to build them ....
تو واقعا یک عقب مانده .بیماری بجای امور فنی وبررسی این ژنراتور ها ابتدا به یک دکتر روانشناس خودت را نشان بده .
چون وقتی دانشمندان گذشته هم گفتند زمین گرد هست وبه دور خود وبه دور خورشید می گردد .تعداد زیادی بیمار مثل تو حک، اعدامشان را دادند .ولی زمین چرخید وچرخید تا به امروز بیچاره بیمار .مهندس صدفی ا .چون نمونه ژنراتور را در اختیار دارم وبرق تولید می کند با هما ن، تکنولوژی .واندکی تعغیر .
Make yours sample and test it .. They use outside electric source to move motor for 1-2 second.. And use the power of alternator to complete the job
What?!
LOL
Same concept they employ in Green Gyro powertech, they built better, bigger machine than this, somewhere in rural village in India!
Before you bashed peoples invention go do some research it works the generator powers the motor and the motor rotate the flywheel and the flywheel with its weight rotate the generator just like hydroelectric the generator head connects to a peltron turbine which the movements of water push and the generator generate electricity which is step up and distributed by a transformer and then step down to the recomend voltages for commercial uses I know that these generators banned in some countries because they want peoples to pay the big companies to go on thair grid but this thing is real trust me
You are saying it's fake. What's your proof?
Try building one, then from that you can tell how or why it's fake.
Yes
Clown🤡
My Friends this is Possible I have tried this before and it works .if you can’t do it does doesn’t mean it’s not practical
Nana, I want try this thing. Any advice
I will give you 1 crore rs if you prove it to me fraud looser
Before you prove this as lie, study mechanics of machines very well. There are topics that will open your eyes to this reality.
However if you are not a mechanical or a technical man with some theoretical knowledge, your argument might be in want of acceptable facts. No man with an average knowledge of mechanical or production engineering will venture to prove that flywheel energy is fake.
A real mechanical or technical man would not post a comment as stupid as yours!
I already tried as they did, it works
@@muhammadravi9893 what? Really?
O seun jare Abbey. Awon olodo....
If there was free energy. Power stations would have used it
that is what they do...then they sell it to you....but yes...electricity is free..is part of the world we live in
Desktop critics who have no idea
The concept of spring generator is good, however there are some inherent flaws, these flaws can be resolved, need a trail and error to refine , as you have explained these are used in industries , there are some improvements required. 1. The Spring generator with 8 springs at 45 degrees each is a good design for running heavy alternators to produce energy, even the flywheel to be heavy and in equilibrium with the springs tension, need to take high quality springs, how this works is when it rotates an alternator it produces a desired energy, and from that same energy , we need to add a motor to rotate the flywheel whenever the flywheel reduces its required spin the motor will support the rotation , few electronics are also required to take into account like speed sensors and automatic switches when the speed reduces the motor will spin the flywheel to compensate the loss and when inertia acts and makes the flywheel to run at the desired speed the support motor will just rotate without power. means to make the spring generator successful we need additional inputs and use of electronics and some variable frequency drives... to help the world the get energy....
PE is converted to KE by the fly wheel,but eventually as the generator load increases,by generative breaking,the KE is dissolved.
When load is connected, the alternate resistance increase due to magnetic fogging, motor should slow down depend on the load. I done before. But not follow the same method. I using alternative + 24v brush motor, load 500w spot light, the resistance is very high.
Increase your motor hp to 3 or 4 use AC motor because of charge back
@@fuellessbrains9943 sounds like you have tested a model and it's working?
I believe with the correct components it is possible. A permanent magnet generator producing maximum output at 500 RPM with a 3 to 5 hp, 2000 RPM AC motor a 100Kg flywheel plus the correct size of pulleys and a proper starting system it will work. Allow it to develop speed and full output before applying any load.
Sorry Majid, unless you make one yourself and proove it fake, I feel that you are fake news, l have begun to make one myself. If I cant get it to work I shall concede and stand by you but till that time, picking holes in other peoples videos claiming its fake is bad jujus. Good luck with your karma.
LOL
Of course you are kidding?
@@beeman1246 if he has started to build one, he's going to be very disappointed
As a Physicst it is well understood that production of power energy through flywheel is possible, production of power through this system in the video is very possible. Gasoline generator uses the same protocol, the only difference is the mechanical aspect.
You are an engeer too, you should go ahead and put an experiment of this into test to see for your self.
You are not a physcist moxxther fuke🤡🤡
La energía libre no se ha hecho porque nadie a insistido, el único problema de la autoalimentacion (generador impulsado con motor de meno hp) radica en la fuerza contraelectromotris de los generadores, pero esta se puede llevar casi a cero si cambiamos el materia del rotor, podemos hacer rotores estrictamente magnéticos con base de teflon y solo el eje central de acero.
These men have taken their time to showcase their ideology to the world to see and a scientific or technical knowledge. If indeed you find it false then you must show the world practically why you are proving them wrong.
Idiot have you ever been to a university and studied about mechanics fundamental? Friction and other constants are the reason free energy cannot exist or you mistakenly took flywheels as mechanical rotational battery which are totally different.
It generates as long as it rotates nothing is free. Conservation of energy.
...certified NUTCASE!!! 🙄
You didn't know that there's no Shadow because the Sun moved because time changes the Shadows
Your argument is weak. You're merely makeing an assumption based on elemental factors outside the experiment. To porve the experiment is false you would have to recreate the model.
ok.
Perpetual motion is TOTALLY impossible.
@@anythingoldmechanical free energy is not possible in closed systems. it is possible in open systems. Then it does not violate the law of conservation of energy. The transformation of a closed system into an open system is what is not learned in university. how it is done can be seen in the work of daniel dingel. joe cell, ed gray etc.
🤣🤣🤣🤣
@@martinbrunnbauer2144 It does violate thermodynamics 2nd law : )
Firstly , those who say these set up doesn't work, study your physics properly... There are some information you are not able to digest , first thing, there is nothing like free energy, it's all a layman's simplified term on a complex process.
There is no extra energy here, only extra electrical energy... Law of conservation of energy states the total energy before enacting into a process can't exceed the total energy of the outcome of the process. Simplified statement is total energy before input is always equal to total energy at output at any point space - time.
This is understood only when you are reading about nuclear energy output calculation.
It's like we have infinite energy that is not directly interacting with outside world at every point in space - time. This energy is the total energy. Since the every point in space is always connected to each, when the energy in one point is absorbed via magnetism ( a form of energy from space, that's having it's property when interacting with matter, either it be electron or any), the magnetic energy is converted to electrical energy and used ( depleted) from one point of space and replenished at another point of space, so totally the work done part is always seen but the actual process is not seen. The replenished part of space actually neutralize the depleted part, so energy in the form of electricity is used and given back.
Maybe you can understand it via the term quantum energies. The intangible energy from which we are able to extract this electrical energy is from sub atomic scale.
If there is no free energy have you tried hydropower energy?
@@noblet5162 hydropower is from water, there is a visible source of electricity generation. well all i meant is the term free energy is just wrong. one form of energy is transformed to another, when one form drains, the drained form gets refilled from point space, so there will be no loss, this is the basic of electricity multiplier, from base of 20 watts, one can even generate 200 wattage power, that is all not even abiding any laws of energy or momentum.
Views are earned through proper ways, this time you got it all completely wrong
Trying to reinvent the wheel- running in circles😂 Mazda copied the bent pyramid and flower of life and came out with the rotary motor - more power more efficient- but they couldn’t perfect it and scraped it
This is not a lie..This works
คุณมาจับผิดคนอื่นโดยที่คุณยังไม่ได้ทดลองทำเลยสักอัน คุณใช้แค่ความรู้ที่เรียนมาจากตำรา มันไม่ยุติธรรม ทำขึ้นมาสักชิ้นแล้วค่อยมาวิจารณ์
ให้คนพูดเจ้าของรายการออกมาทำตั้งแต่เริ่มต้นทุกขึ้นตอนให้ทำเองอกโชว์เลยและข้อดีข้อเสียและทำของมึ่พิสูจไฟไม่ติดเพราะอะไรจะทำอย่างไงถึงจะได้ไฟฟรีเพราะเราต้องอนุรักษ์แล้วทรัพยากรใชเยอะมากไม่ใช่จะมาวิพากวิจารย์กันเก่งจริงทำออกมาเลยว่าจะเจ๋งไหมได้ไหมขอบคุณคนไทยเน้นประหยัดครับยุคนี่ขอขอบคุณเพื่อนร่วมอุดมการครับสุดยอดครับคุณนับถือครับ
You do the experiment and explain why it didn't work. this way it doesn't happen with video footage.
And if the process goes through the centrifugal inertial force present in pendulums.
OK I GOT UR POINT...SO WHAT IF U THINK THEIR INVENTION IS FAKE WHY MAKING A VIDEO? IS THAT MAKING YOU AN EXPERT OR POPULAR? SHAME ON YOU MAN!!! THOSE POOR PEOPLE WONT WASTE THEIR TIME INSTALLING THISE BIGASS MOTORS RIGHT INFRONT OF US AND THEY DONT EVEN SALE THOSE THING...... U JUST PROBABLY ENVY THEM CAUSE THEY ARE SMARTER THAN U...LOOSE THAT ATTITUDE BRO I FEEL SORRY FOR U
I try to prevent people from being fooled into wasting their money. I also help RUclips to provide real and scientific content.
Please, my question is; if the motor is powered with another supply, and the alternator spinning at required rpm and generate electricity, now without disconnecting the supply source, can the supply from alternator side be utilized?
Esta energía libre si se puede generar, el trabajo de la volanta es el que hace que esto funcione, el peso de la volanta es quien sostiene los rpm para realizar el cambio y posteriormente ayuda a sostener la presión cuando se le pone carga al generador, por eso ahí que tener en cuenta los consumos y generación de energía si un motor de 5 hp consume 5 kw y se le pone un generador de 12 kw a 1800 rpm quiere decir que quedaría un promedio de 5 kw para consumir
Energy isn't free meho, if it was there wouldn't be a single power plant in the world, Newton would be a sham and people like you would make sense. 🤣
@@mameaden because you like limited energy sources that you make money off of while the planet goes to an offensive Brigade for things like fossil fuels lithium ion elements as such
Yo estoy de acuerdo contigo pero el creador del video le parece que todo es "fake" la pregunta es porque no lo ensambla el mismo y hace las pruebas ?
Parece que a las personas en esta sección de comentarios les gusta ganar dinero con fuentes de energía limitadas que se agotan y no se preocupan por quienes la necesitan pero no pueden pagarla.
@@anticorporatists9959 no, it's because people like me have seen people building these and failing, it's because we, contrary to RUclips warriors cared enough to give ourselves basic electrical knowledge
Porq no muestran q capacidad tiene para conectar los aparato
It's real .they may cut video but it's real science
Do you have an opinion on Thomas Beardes (RIP)
Motionless Electronic Generator. Its works cycles based on a tipping point principle,only requiring input that is mostly recoverable.......
Second assumption is real and these free energy never going to exist
Nigerian scam : im wealthy African prince but need some money to unlock my wealth
Indian scam : i will sell you a generator that works forever !hhhhhhhhh
its working meachine they rewind the alternator or ac generator something they called its not fake its work
Sure, and I bet you believe your barber as well when he says you look good. These dudes in flip-flops should stick to worrying about my cars warranty...
I really don't see the point of criticizing other people's work or innovations with out trying them out I have done it and it works perfectly well, it's not always about getting likes and subscribers you know
Hello, in your video we have seen nothing convincing, you have only spoken, what you accuse of fake is something that others have shown you too we must demonstrate by practices that it is fake and not by words In life it is not all that we believe that is true, sometimes reality escapes us, we must prove that these videos are false by proving what they hide from us
ok dear koissi, send me on Instagram a video of your free energy flywheel. thanks
@@Energygraphy I don't have a video, what I say is simple you can't sit down and just say something is wrong without showing us convincing evidence, between the others and you they are more or less convincing than you because they show something that seems to be true, to go against them it is necessary to spoil what they have done and show that it is necessary
ruclips.net/video/_kCbdEJXXUo/видео.html
check out this video
Education can liberate Man or imprison him for ever specially if is too educated. there are things in life the defy logic.
Majid Elabi, your video is nothing but your own personal commentary on someone else's invention, which you have an elementary and primative understand about. Sorry..😪😪😪
Lol Majid is so funny, i was practically ROTF when you swore while reviewing the video that run their gen on AC, washing machine, fan, etc...
If you don’t know or can’t do then stop telling it’s not possible, recently two couple Indian scientist bought patent for their fly wheel tech..
TODO SE TRATA DE LOS MATERIALES, QUE SE USEN EN LA CONSTRUCCIÓN Y SU DISPOSICIÓN EN EL EQUIPO. PODEMOS USAR IMANES DE NEODIMIO Y TEFLON.
You should try yourself and save the proof.
You should title your video " how to pull energy from a vaccum" that way you will get millions of views trying to show a bunch of flat earthers that free energy is impossible.
Hello respected sir..
Washing machine motor can produce 220 volt ac current with super magnet....is this real or fake..please help me???
i make it wich magnet and i get 110 volt
Hello you are not understand this technology already manufacturing units begin in india open your eyes 😎 😂
A retro alimentação de um motor elétrico pelo gerador acionado é possível sim!! desde que seja calculado adequadamente, o aproveitamento da eletricidade gerada é bem inferior a capacidade do gerador é claro, MAS É VIÁVEL o aproveitamento parcial! NÃO É FAKE ISTO"" para se afirmar isso tem que ter embasamento técnico, e conhecimento sobre geradores!!
Meu pai é engenheiro eletrico e ele falou que é possível sim. Depende do equipamento que você usa
@@reinaldostrobel81 Sim é correto , eu sou eletrotécnico, sou ferramenta de engebheiro e acompanho este assunto, quero montar um conjunto para tastes
Sou estudante de engenharia elétrica e posso dizer que qualquer pessoa com o mínimo de educação no assunto pode saber que isso é falso
@@k-osmonaut8807si dejaras de estudiar ingeniería podrás darte cuenta que hay muchas cosas que funcionan, pero no quieren que lo sepas.
its suitable for resistive load but not inductive load
the purpose of a flywheel is to smooth out the load on an engine or motor from sudden surge, they in no way can keep a motor running from an electric generator powering both the drive motor & load.
what you could do is build a fancy pulse battery charger in-which the motor ran off a pulse circuit would keep the motor spinning at a set RPM turning a generator charging a battery, now if you then powered the motor off that same battery it would merely extend the battery life as the motor is not running continuous, it would not be self powered
for creating free energy you need to move out of the realm of kinetic & electro mechanical devices & move into the realm of room temp superconductors thus building a device that starts producing usable energy as the temp rises above 0 Kelvin
so in theory if you could build a unit the size of a high efficiency gas furnace & use that to heat a room to 70 F fill that room with more units the same you could generate enough to power a small town.
in reality the aim would be to build 10000w output units for every home that generated power at ambient temp.
Already in the fifth grade of primary school, I learned that what you see in the film is a scam.
When you called it BULLSHIT you nailed it... Bullshit it is.
A good fly wheel needs a housing for a vacuum chamber and it works as a battery not anything else
फ्री एनर्जी नहीं होती १००%\| सिर्फ ऊर्जा का बदलाव ही किया जा सकता है |Free energy is not 100%\| Only energy can be changed
Look dear, There is some waste in energy created by transferring the flywheel rotation inertia to Energy, but still there is a huge energy remains ,you don`t know about rotation of alternator ,very few RPM rotation in new magnetic alternators models in 2018 now is producing high energy, this is what made the electrical generation easy to gain by slow rpm of new alternators, Look to the wind energy, its just to rotate a shaft you gain 1000 watts ,I don`t think what you said about fakes in generation of fly wheels power, it`s not fake my dear inventor you better change your ideas and thoughts, soon you will be found that you are creating a fakes information, This is areal idea and it`s giving power supply, sorry if you find my comments little rude
Love how people try and debunk things without any experimentation, the only fakery here is this video.
They think they can fool the real engineers
Please... Can you show us video which is authentic video for free energy Electricity using AC Synchronous Alternator, Electric motor and Fly wheel as SELF RUNNING GENERATOR? i have serious interest in this generator because i want to donor this generator for small village as a free project for the village .. i have watch alot video, am right now confuse.. help out
How many kw generator do you want to buy
"Reaction" part can never be more than it's "Action" part.... right ✅👍
Equal and opposite my boy. Something thinking clearly... finally
@@natas0733 yes you are 100% right... thus such gravity machines existence are impossible...
Idk, takes very little to split an atom and those release enough power to eradicate cities, so comparatively, the "Reaction" can be far greater than the "Action".
@@greyfireocelot6140 but the atoms splitting give off equal amount of heat for the energy used. Actually LESS heat once you factor in entropy. It just happens 10s of billions of times in a relatively condensed area so it seems like one action one reaction. But its like 75billion action and reactions. Im guessing you arent a nuclear physicist?
Sir have a question ❓.
You tell me Kirloskar 10 HP engine how use a flywheel please tell me sir.
Neden motor volan arasına otomobil şanzımanı koymuyor
Oh man you're just making that video for your own video views it's actually work
It’s 100%real the generator makes electricity for the motor and you can have a trickle switch to make it speed up and then disconnect the power it will continuously make power on its own
Why you said it is fake , but yourself never try build it ?
they did it wrong LOL, the right is ( motor - flywheel - motor ) the third motor will be the generating one |__ motor the 2 motors above is both connected to each other, the 2nd motor powers the first one you know the first one uses energy to spin but it receives actually lesser energy generated from the 2nd motor, so there is the flywheel the purpose of the heavy flywheel is to maintain its RPM.
To make it simple. Flywheel is the battery.
@@diocre7446 To make it simple. Learn one thing: NOTHING is for free.
@@beeman1246 to be honest you want people to live off your lithium ionic batteries cause that's your goal making money off people's need for energy
@@anticorporatists9959 You have to read with understanding. There is no energy from nothing and for free.
@@beeman1246 and you got to understand this that limited energy sources are what runs out when it runs out you have to buy more just to function the energetic needs no more limited energy sources that's what's needs to happen otherwise will all be doomed
1) Watt In ... Watt Out ...
2) If I press "brake" - demand Watt ... the flywheel will take the energy for a while ... but if I press continuously the "brake" - demand Watt I will stop the Flywheel-Generator after some time ... more heavy the Flywheel more time to stop ... But Also more time to start from 0 RPM to 3000 RPM that need the Generator and so I will spend more power to achieve that RPM
Like the car when you press the brakes ... hybrid car Electric and Gas ... when you press the "brake" this work as a generator to charge the batteries ... but if you insist to demand more watts for the batteries the car will stop . Some video looks so real but in videos they can edit them as they like it ...
Curious. 1500KW motor with 10,000 KW Generator is like a slight touch of the brake pedal. With gear reduction of motor to flywheel and overdrive of flywheel to generator, wouldn't the inertia of the 75 lb flywheel maintain the rpm? I think I will build one and find out!
@@daleh2957 I'm going to subscribe, looking forward to it.
As Engineers I was suspicious as you
But I came to understand that some of these device works great but there's a big secret
One day a Tanzanian man announced to the govt to have the device and a man is now in the hand of govt.
U need to make a research on the parents they use
Many people are using low rpm PMG to hit that value as normal as you you won't get it
...you are definitely NOT an engineer!...stop trying to bullshit your way around. Besides your English is CRAP!
these are fake 100%. hidden wires, camera cutting, looping video to show working etc.
Einen waschmaschinenmotor habe ich ausgebaut und der läuft schon bei 5v keine Ahnung mehr wieviel amper es genau waren.
Er läuft mit einer 9v Batterie schon wunderbar zudem kommt hinzu, daß eine Waschmaschine ein Schwungrad besitzt klar die Wäsche (Inhalt) bringt ein ungleich Gewicht.
Deswegen ist eine Waschmaschine ja auch so schwer damit sie nicht gleich weg fliegt.
😆 Also bullshit wird ich da nicht sagen, eine Waschmaschine sollte eigentlich nicht so viel Strom Verbrauchen.
In Deutschland werden vermehrt schwungradenergiespeicher gebaut,
Vielleicht noch nicht ganz richtig verwendet jedoch ist man sich bewusst das kein gewöhnlicher kondensator so gut Schwankungen im Stromnetz ausgleichen könnte.
How did you conclude it's a one kw generator. Have you taken the energy stored in the flywheel. See Dr. Chaganti Bhaskar videos and his patented model of flywheel generator. He has proved it. Ideally don't try to prove yourself without scientific backing. Come out with numbers or recreate the model and show us why.
Se colocar volantes pesados funciona sim, depois que os volantes entram em rotação eles farão a mesma força que a máquina de um trem puxa centenas de vagões.
It has nothing to do with the train. This example is wrong.
É o mesmo tipo de força, é só colocar volantes pesados que funciona no gerador que quiser, funciona sim.
@@edpa5634 I will make a model of it soon and everything will be clear.
@@Energygraphy sir what about using a 3hp DC MOTOR with high RPM AND HEAVY FLY WHEEL I think it can work them because you charge back and use same energy
All I hear is talk talk talk and no work .All work and no play makes Jack a dull boy.
ruclips.net/video/AHGwzyNplIM/видео.html
@@Energygraphy Still all is talk talk talk blah blah blah, go and make and test yourself idiot.
Super . Condisoner working and not connect. Welding lamp not lower
1.Electricity is somewhere else 🤣🤣 good answer by u
Moral of a story kiddies: never trust the word of a man with a goofy accent, especially a man with a goofy accent......wearing a DRESS!
First know what an alternator is then also find out how the wind turbine operates,scientifically you will know that this system is real....
Because your brain reached thinking capacity. They work in Tanzania
I don't think that is fake! The person is using an electric generator and i know for a fact that an electric generator produces electricity, it's not fake! 🤔🤔🤔
And why would they take so much trouble to make only fake machines? They don't even sell them. I do not think it is pure falsehood. The energy probably dissipates soon, though. In other words, it works for a short time.
Thé question is ...
why they do that ?
For what ?
Build it 1 and then prove your point.
Assumption is not fact.
I am about to build the same.
Be kind.
This is simple logic before you move to the next step . A 1 hp motor are used in 3kva genenerator that is 1 h of either petrol or disel or even electrical motor. 1 hp is equal to 0.75 kw so by using 1 hp you will be using only 0.75 kw of 3kva out put
Bro I can tell you for free that,this work very fine,cuz the motor used are also used for heavy iron cutting is factories,,and the alternator,big enough to power two homes..so do ur finding properly before condemning...
I busted myth
Is it possble to get free energy
bro this work,, hello from CROATIA
Since 15 years, I have been dealing with angular energy electricity generation systems (R&D). My positive designs about angular continue. In this regard, my own financial means are insufficient, I had meetings with many businessmen, they accepted the financing of the project, but they gave up when it came to signing a protocol, that is, when it came to formalisation. If there is an entrepreneur who will take firm steps with me on this path, who is idealistic, has financial means and wants to make an official protocol, I would like to meet. 98% of the published videos are wrong and do not work. I know the mistake they all make.
so you have watched many of these videos and say most of them do not work. then you would know this by visual only. it's something you can see that tells you they don't work. cannot be special way the motors or generators were wound because you cannot see that. cannot be the weight of the masses because you cannot know that by sight. so is there something missing that one would be able to see ? and because its not there you know they don't work ? I think these can work and here is why: the generator must be sized large enough to provide sufficient power to operate the drive motor and have enough excess power left over to run other things. then the drive motor must be sized only large enough to spin the flywheel and generator together with both operating at their needed rpms. the gear ratios must be set as to not exceed the drive motors run efficiency wattage rating. the flywheel mass must be sufficient enough to act as a buffer, and to keep the generator spinning fast enough in order for it to output enough power to keep the drive motor going for a certain length of time when there is no external power available. and the device as a whole requires tuning between components and gear ratios. I dont think you will have much luck finding financing simply because any new energy technology usually gets shut down by big business especially the energy business. we are not allowed to market anything that upsets the status quo. best to just make the device, perfect it and sell them here and there. forget about advertising or social media sales.
I want to create a clean energy system for a cleaner world. No mechanical wheel system whose angle does not change can produce energy. No system will work against the laws of physics. You can promote this project in your country. I want to realise this project and get a worldwide patent. Of course, I need a solid and idealistic investor to realise these works. I convert angular energy into mechanical and electrical energy. I am an inventor. I am ready to realise this project in any country that will support me.@@rmendes2mendes915
@@rmendes2mendes915The electricity produced by magnetic systems is insufficient. If you ask a physicist or electrical engineer about this possibility, you may hear that the static field cannot produce an electric charge. This is true. But the Earth's magnetic field is not static. It fluctuates, and it is these fluctuations in the magnetic field that are likely to represent a source of energy. Gravity and the magnetic field are complementary. Only their direction and function are different. The force travels from the earth's core to its extremities. When it starts to jump from the extremes (N/S) into the vacuum of space, it weakens and turns into magnetism. Nothing can be created out of nothing. The force of gravity (gravitation) fed by the natural magnetism of the earth must be used. There is no harm to the environment. When the system is working, the forces only change places. The angular system provides force transfer by using the gravitational force, which surrounds every part of the world and is constantly renewed, at different rates from different angles. It is just like the transmission of electricity to another area by means of a cable. There is a large gain in force at the feed angle, but a small amount of loss occurs at the trigger angle. This angle is fuelled by the force of gravity. Energy losses due to friction are present in all systems, but this does not affect the result. If we define the system, we should sort from large angle to small angle. From the end of the force to the beginning. The main power source is mechanical. The electronic system complements the mechanical system and the software controls the system. The wave frequency of the earth does not damage the device. The device works with a robotic wheel system that changes the angle of the magnetic wave frequency in the mechanical direction every second. Whichever wave the gravitational force comes from, it will enter the angle of the robotic wheel. There is no escape from this. In the mechanical wheel system, the trigger angle at which we lose energy is 50 per cent smaller than the feed angle we gain. The source is the force of gravity. There is a magnetic force in every cm2 of the earth. This magnetic force is constantly moving and the flow is renewed. Therefore, as the speed increases in electric motors, the amount of energy received per cm2 increases. According to this principle, the realisation of angular resonance is possible by changing the force points. Again, the question is how much energy can be generated from them.
@@rmendes2mendes915We can use Faraday's law to generate this quantity and the answer comes to something like 3.14?10^-9 volts (three billionths of a volt) per m2 of magnet surface, utilising the flux. The answer seems to be that while energy from the Earth's magnetic field is technically and theoretically possible, it is not possible to generate it on a significant scale or to generate usable amounts of power. It is not possible to convert the force available on the fixed axis into usable energy. Systems such as the Lenz, rotover and flywheel are vibratory resonances. It does not produce sufficient commercial power. There is no angle change in such devices. Efforts are being made to generate electricity from vibration resonance, but this is not possible. Because there is no angle change and torque in vibration resonance. The next resonance always consumes more energy than the previous resonance. Some people also use magnetisation, which is also not possible. In order to generate energy, the production and consumption angles in a system must be seen from the east. All electrical devices invented in the history of technology work with 2 or more energy angles. For example, no device (vibration resonance) works with only neutral without phase or only 1 phase without neutral (energy transition angle). It works with 1 phase and 1 neutral (energy transition angle). Works with 2 phase (energy transition angle). It works with 3 phase (energy transition angle). The angular system, which works without using fossil fuel, produces electricity with the same principle. It realises electricity generation from 2 different mechanical angles (movement resonance). These 2 different energy transition angles are clearly visible. The law of physics explains exactly this. Closed systems are contrary to thermodynamics and do not work, but there is a difference of opinion about these systems. The definition of closed systems is not yet fully understood by scientists. If you go straight on a 1 metre road, draw a circle or go up steeply and return the same way, no matter which vehicle you use, you will never gain any energy in this work. In such systems, electrical energy with commercial value can never be produced. If you want to make a profit, you need to change your return path, your distance. You need to switch from a closed system to an open system. No fossil fuels are needed for this. A usable angular energy corridor is needed. All the anonymous projects analysed are closed systems. They run on a single-stroke engine system and do not work. An efficient system must have at least 2 or 4 time principles. Just like a fuelled engine. Intake, compression, combustion and exhaust. The production and consumption aspects of energy must be separate. Energy can never be produced and consumed in the same cell. The chambers (angles) must be separate. The principle of operation of the fuelled system and angular resonance is basically the same. Systems that do not change with angle are closed systems. Just as the principle of a single-stroke engine does not work in fuelled systems, it does not work in non-fuelled systems that do not change angle. Solar, wind and wave systems work according to the 2-time principle, but their commercial efficiency is very low. Energy production and consumption angles are different. Numerical and visual formula technique should be analysed at the same time. Accordingly, you cannot give more energy than you receive. Continuous losses occur. These losses vary according to each system. The important thing is which type of energy can be used correctly and where. This is why angular resonance is needed to produce enough kinetic energy. For example, gravity is a force, not energy. In physics terminology, force and energy are not the same thing. Force is defined as a quantitative description of the interaction between two physical bodies, such as an object and its environment. Force is proportional to acceleration. Mathematically, force is the derivative of momentum with respect to time. Energy is the capacity of a physical system to do work, and work is defined (in computational terms) as the integral of force over a displacement distance. It is applied to move an object away from a certain distance. For force to be energy, it must be applied to an object. Force cannot exist without energy. We can modulate this force by applying more energy. The resulting energy is less than the total energy expended. You just convert it into a different form. During the Earth's rotation around itself (self-rotation), since the gravitational force from the sun does not create a torque, the angular momentum of the Earth remains constant because its carrier passes through the centre of mass. Therefore, the Earth's rotation time remains constant for 24 hours. Conservation of momentum in a system of bodies. In the case of a system of bodies, Newton's second law of rotational motion has the form = image. From this relationship it follows that if the algebraic sum of the torques of the external forces on the system is zero, the angular momentum of the system is held constant.
@@rmendes2mendes915ANGULAR RESONANCE ELECTRICAL SYSTEM (ARES):
To create a kinetic energy corridor requires a robotic wheel system that can change its angle. Energy cannot be created out of nothing, it can only be transformed into each other. There is no violation of the law of thermodynamics. Many physicists think that kinetic energy cannot be obtained except in systems such as wind and wave energy. This is wrong. Kinetic energy is obtained by changing the resonance angle. This system is not a closed system. It is an open system. Scientists will realise that it is an open system after seeing this project. We cannot see the wind with our eyes, but we accept that it exists as a factor. We cannot see the energy corridor of a magnet, but we accept that it exists as a factor. We can measure these values. The scientific world must develop a method that can measure kinetic energy over time. After this system we have produced, scientists should also take the trouble to produce a device that can measure kinetic energy. The answer given by scientists regarding the measurement of kinetic energy is that you cannot measure kinetic energy because it is relative. It depends on the speed of an object, which is relative and cannot be measured as an absolute value. There is no power limitation on the growth of the device. It can be produced in the desired size. For 1 mgwatt solar panel, an average of 12000 - 20000 m2 open land occupation is required. I plan to make 1 mgwatt in 100 m2 with the angular system. You need to store solar energy in the battery to use it at night. In the angular system, there is no need for internal battery (energy storage) after the first movement. There is an instantaneous production and consumption system. 7/24 constant energy is received. The robotic wheel uses the force of gravity in the most efficient way by moving and changing its angle. For this system, sensors are needed to change and start the angle of the wheel at a maximum speed of 0.5 m/s. These sensors can already be produced with the desired sensitivity. Every part of the system is mobile. At each point there is a resonance element that changes the mechanical angle. The angular system consists of at least 6 cells. They are mounted on top of each other (solar panels cannot be mounted on top of each other) and connected in parallel. If preferred, it is also mounted side by side. There is no drawback. If mounted on top of each other, an average of 10 kw energy is produced in 1 m2. If it is not preferred to be high, it is mounted side by side and takes up more space. Each cell generates electricity independently. There is no mechanical connection between them. There is a parallel energy connection. Energies are combined in the transformer. In angular resonance, there is movement but no vibration.
ANGULAR RESONANCE ELECTRICITY GENERATION HAS 3 BASIC FACTORS:
1: The phase of change of direction of the angle in a split-second time.
2: The stage of reaching the maximum in momentum.
3: Rotation phase in resonance.
The best way to prove a point is to build 1 of these Free Energy Generators yourself using a flywheels, an electric motor and an alternator. I can fund the materials for you. If it doesn't work, then you're free to come here and speak against it.
I don't like Theories, but Self Practical Proves....
Yes, research always gives us the best results, But this is not research. I will soon build a model of it and prove that it does not work scientifically. And these people did not say that this is research, they said that it works.
In case you wish to make a real overunity machine where flywheels are included let me know in reply on this comment. I will tell you what to do. I do not have a time or place to make test.
Kamma flywheel free power generation no Full all sorisu?
I don't no man ,I will build one to prove myself is fake
Please if you don't know much about synchronized generators or how a generator works it will be difficult for you to know this , you have to study
If these people could make free energy then they could mount this to an electric car and make a video about that instead, how about a free energy car and plane and then they can record that...Now that would make a viral video... They can't, because they are recording this plugged to an extension chord. Why would the whole planet be spending billions trying to make a fusion power plant when we could hire these guys to build us a free energy flywheel in every home instead... And for all those self-degreed scientists and engineers saying "oh build one and see if it works"... no... you build one, spend money on a bunch of motors and spend your time building this thing, then think to yourself, "well, I must be doing it wrong because I saw those guys made it work somehow so it must be real"... And then spend the rest of your life trying different sized motors and flywheels... have fun with that...
You did not prove anything that the video is fake .just oscillation is your proof. Nothing else.
Solar panels work is that a lie too?
A lie. There is no such thing as electricity, basically, even the mobile that he has runs on oil
It's Possible man...
Things are improving all the time in electric generation but people are still stuck in the past of you can’t change things of the sky will fall in and Profits will fall , If you don’t like it don’t buy it …..simple.
Only gravitational force can create free energy machine
stop to lose time with scrap irons wlyvheel .