Water Pump Replacement Peugeot 107, Toyota Aygo, Citroen C1 CityBug Yaris 1kr-fe

Поделиться
HTML-код
  • Опубликовано: 4 дек 2024

Комментарии • 239

  • @greaser7765
    @greaser7765 3 года назад +26

    It’s great there is folk like you on the internet good enough to do helpful videos like this. Well done my man 👍🏼

    • @aaanton11
      @aaanton11  3 года назад +3

      Glad you enjoyed it! Thanks for the great comments👍🏻👍🏻🛠

  • @lovetolay
    @lovetolay Год назад +3

    Just changed the water pump, with your video….spot on..thank you

    • @aaanton11
      @aaanton11  Год назад +1

      well done, Thanks for the great comments👍🏻👍🏻🛠

  • @kennedygwanama3047
    @kennedygwanama3047 3 года назад +2

    My water pump on the Toyota Aygo is been rattling for a month now at 66450 Km done on car. With this clear video am going to change it myself....Thanks a lot Aaanton...

    • @aaanton11
      @aaanton11  3 года назад

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

    • @kennedygwanama3047
      @kennedygwanama3047 3 года назад

      @@aaanton11 I successfully changed it myself today and all is well. Thanks for the encouragement. The only difference was on work preparation. It is actually much easier and faster when one removes the front bumper than getting it under the wheel. That how I approached it.....I learned the trick from another fellow....

    • @lajosbakk3317
      @lajosbakk3317 7 месяцев назад

      My Aygo just started to do it and on clock is 112.000 miles :)

  • @je2628
    @je2628 2 года назад +6

    So very good like all your videos 👍
    I bought an aygo, knowing theyre pretty easy to fix by oneself. Just... nice to know, i thaught. Then i found your channel, and now i changed three weel bearings, understood that the ignition coils was the problem (and so ridiculously easy to replace!) and soon my water pump is new as well 😊 well done for someone just filling up oil and change tyres before! And so much money i saved 😱 Thanks mate 😎👍

    • @aaanton11
      @aaanton11  2 года назад

      Glad you like them! Thanks for the great comments👍🏻👍🏻🛠

  • @harmonicresonanceproject
    @harmonicresonanceproject 27 дней назад

    Super helpful, thank you for the detailed upload, parts arriving later.

    • @aaanton11
      @aaanton11  26 дней назад +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @safdarrizvi9885
    @safdarrizvi9885 Год назад

    What a helpful video.Got my 60 plate 107 3 weeks ago and i could hear some noise coming from the engine bay but wasnt sure where the noise was coming from exactly.Today i took the front bumper off to get to the auxillary belt as i was gonna take it off to check what was sounding rough.I noticed a puddle under the car and this confirmed that the water pump was the faulty part.I got the new pump and belt and getting it fixed first thing in the morning.Brilliant step by step video.I feel i could do this myself but cars already booked in at the garage now.

    • @aaanton11
      @aaanton11  Год назад

      You will be fine, if you can take the bumper off you can change a water pump, Thanks for the great comments👍🏻👍🏻🛠

  • @martinneumann7783
    @martinneumann7783 3 года назад +3

    Learning, learning, learning (and doing if necessary). I just checked the tension of my C1's belt. Everything allright! Thank you aaanton! 🚗😃🚗

    • @aaanton11
      @aaanton11  3 года назад +1

      Glad it helped! Thanks for the great comments👍🏻👍🏻🛠

  • @sfeath520
    @sfeath520 3 года назад

    This is the fifth time I have watched and used the info in your videos! Managed to fix my wife's car a few times now! Cheers :P

    • @aaanton11
      @aaanton11  3 года назад

      Great to hear! Thanks for the great comments👍🏻👍🏻🛠

  • @bishophalls
    @bishophalls 5 лет назад

    Spot on. Parts ordered, and ready to fit pump on my C1. Citroen wanted 250 all in for the job. Very pleased RUclips exists!! Nice one.

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments👍🏻👍🏻🛠

    • @stylianosdeligiannis6662
      @stylianosdeligiannis6662 4 года назад

      Hi, really good job! Your great video helping us a lot! Do you have any available for timing chain replace? Is possible DIY job? Thank you

  • @only1brum
    @only1brum Год назад +1

    I just wanted to say Ant, that your videos have been helping me for a while. Thanks for another good video mate. You’ve basically done your own Haynes video manual for the Aygo, Ant style 😎.
    💪🏽

    • @aaanton11
      @aaanton11  Год назад

      Much appreciated Thanks for the great comments👍🏻👍🏻🛠

  • @dashcammer7220
    @dashcammer7220 3 года назад

    thanks for the detailed video i changed my water pump as mine was whining after watching this video thanks aaanton

    • @aaanton11
      @aaanton11  3 года назад +1

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @Luke-hc6ud
    @Luke-hc6ud 10 месяцев назад

    Thanks mate this helped a lot, made it really easy. Replaced mine at work after the pump seizing the day before and melting the belt. thankfully seems that the previous owner misplaced the wheel arch lining so made the job even quicker 😅

    • @aaanton11
      @aaanton11  10 месяцев назад

      Nice work! Thanks for the great comments👍🏻👍🏻🛠

  • @gavjlewis
    @gavjlewis 5 лет назад +3

    Good video as always. Did mine at about 60k, current one is still going fine 95k later.
    Think you will have to do another video soon. Those front disks look about ready for a change! 👍

    • @aaanton11
      @aaanton11  5 лет назад

      🛠thanks gav, yes Pads and Discs in another 6000 miles👍🏻👍🏻🛠

  • @stephenpeel7249
    @stephenpeel7249 5 лет назад

    Thanks, that's the perfect video, every other water pump video has been 2 mins of bloody pictures! Our 2008 c1 57k has a noisey water pump with some corrosion and coolant residue around the pump, i'll get stuck in over the weekend once the no aircon belt arrives.

    • @aaanton11
      @aaanton11  5 лет назад

      Great stuff, thanks for the great comments 👍🏻👍🏻🛠

  • @LBClub_Official
    @LBClub_Official 2 года назад

    Thank you for this video, it allowed me to change the water pump on my Little Bugger 😂 Brilliant work!!

    • @aaanton11
      @aaanton11  2 года назад

      Well Done, Thanks for the great comments👍🏻👍🏻🛠

  • @marcinrychu9964
    @marcinrychu9964 3 года назад +2

    Ja to zmieniłem normalnie na parkingu w pół godzinki 😎 od góry bez rozkręcania połowy auta. swoją droga te trojaczki aygo c1 i 107 są mega mega proste

    • @aaanton11
      @aaanton11  3 года назад +1

      Well done Thanks for the great information👍🏻👍🏻🛠

  • @richardmarsh1332
    @richardmarsh1332 Год назад +1

    Nice job, the only thing that crossed mind was length of the new bolts. I know they were longer to accommodate the deeper casting but I think I would have checked that their projection amounted to the same as the original bolts in case they bottomed out in the tapped holes ( you might have already done that off camera). Not sure if the water pump was genuine Toyota but been caught out so many times with patent parts.

    • @aaanton11
      @aaanton11  Год назад

      Great point! Yes make sure the bolts fit, Thanks for the great comments👍🏻👍🏻🛠

  • @ridahaimoura9537
    @ridahaimoura9537 2 года назад

    Perfect, detailed & very clear description !!! Thanks !

    • @aaanton11
      @aaanton11  2 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @Chris_905
    @Chris_905 5 лет назад +1

    Brilliant , the Mrs has an Aygo so if it ever needs a pump I'm all primed to go , cheers buddy 😁👍👍

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments 👍🏻🛠

  • @cw_uk
    @cw_uk 3 года назад

    thanks mate, fixed my yaris sr water pump today with help from your video!

    • @aaanton11
      @aaanton11  3 года назад

      Glad it helped Thanks for the great comments👍🏻👍🏻🛠

  • @donsekr8520
    @donsekr8520 2 года назад

    Beautiful, thanks from Sweden..!

    • @aaanton11
      @aaanton11  2 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @lajosbakk3317
    @lajosbakk3317 7 месяцев назад +1

    perfect video in 2024 :) like always...

    • @aaanton11
      @aaanton11  7 месяцев назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @naureh5084
    @naureh5084 5 лет назад

    Thanks for the excellent and detailed video and explanation, I'll be tackling my water pump tomorrow.

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @kevinparr4823
    @kevinparr4823 Год назад

    These little cars are a dream to work on, BMW and mercs could learn a lot from Toyota👍 great video... Looks like it needs an oil change from the state of the oil filter 😂😂

    • @aaanton11
      @aaanton11  Год назад

      😂 Thats in another video, Thanks for the great comments👍🏻👍🏻🛠

  • @74HC04
    @74HC04 5 лет назад +1

    Thanks for another fantastic tutorial with all the details! :)

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments 👍🏻👍🏻🛠

  • @falconflylow
    @falconflylow 2 года назад

    GREAT VID SIR!
    I have watched it on phone, but if I had headphones, I would probobly loose my ears on sound of water pump at first half minute of the video :-D

    • @aaanton11
      @aaanton11  2 года назад

      Glad you enjoyed 😂 Thanks for the great comments👍🏻👍🏻🛠

  • @gerhardgugelhupf2272
    @gerhardgugelhupf2272 5 лет назад

    Many thanks for your great videos and efforts spend. For this fun part here removing the front bumper (few bolts and two clips on both sites) gave me easier access to the rip belt area. Greetings :-)

    • @aaanton11
      @aaanton11  5 лет назад

      thanks Gerhard for the great comments 👍🏻👍🏻🛠

  • @SerjShvediuk
    @SerjShvediuk 3 года назад

    Спасибо за показ замены помпы.

    • @aaanton11
      @aaanton11  3 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @tardeliesmagic
    @tardeliesmagic 4 года назад

    Good informative video,thanks.Just that pecky plastic wheel arch cover that adds time to the job.Been watching a few videos and great job!

    • @aaanton11
      @aaanton11  4 года назад +1

      Glad you like the channel, Thanks for the great comments👍🏻👍🏻🛠

    • @crpth1
      @crpth1 4 года назад

      The "pesky plastic" had years of service to parts that otherwise become completely exposed!
      Every single car, where some "clever" mind decided to remove what the factory put in there. As dire consequences easily seen over the years...
      Be wise and always keep the protections in place! There's good reasons why factories, that are always counting pennies, decide to spend money on those... Just some food for taught! ;-)

  • @Mech79
    @Mech79 Год назад

    Thx for this good Video!! 🙂👍🏼

    • @aaanton11
      @aaanton11  Год назад

      Glad you liked it! Thanks for the great comments👍🏻👍🏻🛠

  • @mircoboninsegna3629
    @mircoboninsegna3629 4 года назад +1

    Nice video, congratulations ! 👍👍👍

    • @aaanton11
      @aaanton11  4 года назад +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @masterofdisaster7427
    @masterofdisaster7427 4 года назад

    thanks mate for making the video, well done.

    • @aaanton11
      @aaanton11  4 года назад

      Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠

  • @medford9574
    @medford9574 Год назад +1

    well done thank you

    • @aaanton11
      @aaanton11  Год назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @AlbF9560
    @AlbF9560 2 месяца назад

    Great video 👍

    • @aaanton11
      @aaanton11  2 месяца назад

      Glad you enjoyed it Thanks for the great comments👍🏻👍🏻🛠

  • @curtis8516
    @curtis8516 3 года назад +2

    Could you do a video on where to jack it up and or place axle stands Ant?

    • @aaanton11
      @aaanton11  3 года назад +1

      Yes I showed this in the lowering spring video,ruclips.net/video/GAsWu2Vlbf4/видео.html Thanks for the great comments👍🏻👍🏻🛠

    • @curtis8516
      @curtis8516 3 года назад

      @@aaanton11 where at the front, you only showed the back :)

  • @Canem69
    @Canem69 Год назад

    Grazie mille, fratello.
    Possiedo una Dahiatsu Sirion che monta lo stesso motore Toyota 1KR-FE.
    Acquisterò pompa e cinghia e lo monterò sotto casa assieme a te.
    Grazie ancora!

    • @aaanton11
      @aaanton11  Год назад

      Yes they are very similar, Thanks for the great comments👍🏻👍🏻🛠

  • @willmackenzie116
    @willmackenzie116 4 года назад

    Thanks for your help great video! Hopefully going to swap this next week!

    • @aaanton11
      @aaanton11  4 года назад +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @rumboj1
    @rumboj1 4 года назад

    Perfect instruction videoclip!Professional! Thank You soo much!

    • @aaanton11
      @aaanton11  4 года назад

      Glad it was helpful!, Thanks for the great comments👍🏻👍🏻🛠

  • @valentynpetrov1252
    @valentynpetrov1252 4 года назад

    Most complicated multi task repair 🤪. I love you anyway.

    • @aaanton11
      @aaanton11  4 года назад

      Thanks Valentyn, appreciate your support, Thanks for the great comments👍🏻👍🏻🛠

  • @jcue
    @jcue 4 года назад +2

    Great video mate. but you are really taking a risk with no jack stands. I would hate to see a good mechanic get injured. Keep up the great work though. Subscribed.

    • @aaanton11
      @aaanton11  4 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @interdiction2
    @interdiction2 5 лет назад +10

    Not seeing any axle stands there matey. Living dangerously. Be careful.

    • @aaanton11
      @aaanton11  5 лет назад +1

      I always use the safety catch on the jack, or a stand, thanks for looking out for me 👍🏻👍🏻🛠

    • @PeterSmith-ls7ut
      @PeterSmith-ls7ut 4 года назад

      @@aaanton11 ?

    • @crpth1
      @crpth1 4 года назад +1

      @@PeterSmith-ls7ut - See 1:35... ;-)

  • @Mirlindzeqiraj
    @Mirlindzeqiraj Год назад

    I did it, thanks to you.

    • @aaanton11
      @aaanton11  Год назад

      well done, Thanks for the great comments👍🏻👍🏻🛠

  • @MrWindermere123
    @MrWindermere123 5 лет назад +1

    Silly question, but have you ever damaged your watch by wearing it during car repairs? I've chipped the glass on mine and broken off one of those spring-pins that hold on the strap and learnt the hard way to take it off first. Fix one thing and break another!

    • @aaanton11
      @aaanton11  5 лет назад +1

      I have slightly scratched the screen once, but no permanent damage from using the watch while working. I love this Casio G shock titanium watch I have had it now for nearly 10 years.
      Thanks for the great comments 👍🏻👍🏻🛠

  • @totaljustice1582
    @totaljustice1582 Год назад

    Thank you so much for this video, very helpful.
    I managed to do this without jacking up the car or taking the wheel off. It's a bit of a tight space, but if you have skinny arms, it can be done 😂
    I don't suppose you know what the oem water pump is for a 07 plate? Tried looking online but no luck. Just trying to find out if my pump was ever changed.

    • @aaanton11
      @aaanton11  Год назад

      Great job! Thanks for the great comments👍🏻👍🏻🛠

  • @SébastienP-l1g
    @SébastienP-l1g 5 месяцев назад

    Hello aanton11,
    Thank you for your great video. I’m still asking myself if my belt tension is good. I’ve followed your advice but not so easy to be sure that the belt is enought or too much tight.
    I’ve some question:
    1) Is it normal that the belt tension rise when the engine is hot ?
    2) Just for comparison, what is the length or the alternator screw for belt tension behind the welded/fixed bolt ?
    The technical manual or the Aygo recommand a bending or the belt between 9-11mm when apply a force of 10kg on the belt in the middle between alternator and cranckshalft. Very difficult to test because of reduced space.
    Thank you for helping me choosing the right belt tension.
    Sorry for my english, I com from Switzerland.

    • @aaanton11
      @aaanton11  5 месяцев назад

      Don’t get too worried about the tension, start on the looser side and run the engine as long as it doesn’t squeak when under load ie heated screen and wipers on you will be ok 👍🏻 Thanks for the great comments👍🏻👍🏻🛠

  • @anthonyfriggieri2244
    @anthonyfriggieri2244 3 года назад

    Hi, I really enjoy your videos. They are really helpful. Can you please do a video on how to remove completely the tail boot door from the Peoguet 107/Citroen C1/Toyota Aygo, please? I searched everywhere on the internet and cannot find a thing. That would be really helpful. Thanks in advance.

    • @aaanton11
      @aaanton11  3 года назад +1

      I will add it to the list, Thanks for the great comments👍🏻👍🏻🛠

    • @joaquinpv7904
      @joaquinpv7904 2 года назад

      @@aaanton11 did you?? I'm specting it as well

  • @Meanfidler
    @Meanfidler 5 лет назад

    Great video, thanks for sharing!

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @mikhaillindan9091
    @mikhaillindan9091 2 года назад

    Thanks Anton, i noticed you didnt put any sealant to seal the new water pump, just new gasket rubber and then the bolts. Is it ok without the sealant? thanks

    • @aaanton11
      @aaanton11  2 года назад +1

      Yes Wont need sealer Thanks for the great comments👍🏻👍🏻🛠

  • @lovetolay
    @lovetolay Год назад

    Just got this problem today…..will let you know how I get on

    • @aaanton11
      @aaanton11  Год назад +1

      Ok, Good Luck, Thanks for the great comments👍🏻👍🏻🛠

  • @LondonG0708
    @LondonG0708 Год назад

    Could you do a valve seal replacement video please?

    • @aaanton11
      @aaanton11  Год назад +1

      I will, if I ever come across one that needs doing they are so reliable and don’t really wear out that often, Thanks for the great comments👍🏻👍🏻🛠

  • @user-yp1jx5eo6d
    @user-yp1jx5eo6d 3 года назад

    Hi, Great and useful videos, can you please show how to fix cod p0443 Peugeot 107. Thanks

    • @aaanton11
      @aaanton11  3 года назад

      I will put it on the list, a common issue is the filler cap not sealing correctly, this can cause an issue, Thanks for the great comments👍🏻👍🏻🛠

  • @n4rek840
    @n4rek840 4 года назад

    Great work 👍🏻

    • @aaanton11
      @aaanton11  4 года назад +1

      Thanks for the great comments👍🏻👍🏻🛠

    • @n4rek840
      @n4rek840 4 года назад

      aaanton11 you are welcome,
      I had the same problem on my Toyota Aygo

  • @geitsche
    @geitsche 3 года назад

    Thank's for that video. I have a qustion: Do you have to vent the 107 coolant circuit? When yes, where exactly?

    • @aaanton11
      @aaanton11  3 года назад +1

      No need, just fill it up and run with the cap off for a bit, Thanks for the great comments👍🏻👍🏻🛠

  • @scorpiongetoverhere1025
    @scorpiongetoverhere1025 2 года назад

    Hey! Amazon tutorial! Can’t wait to make a start myself. I want to ask would this be same for an Aygo diesel 1.4 2007? Also what do you call that power tool you are using to take bolts off?! Thanks !

    • @aaanton11
      @aaanton11  2 года назад

      1.4 diesel is different, amzn.to/3qaGVxq this is the tool, Thanks for the great comments👍🏻👍🏻🛠

  • @KimLind
    @KimLind 9 месяцев назад

    Hey Anton at what temp do fan kick in/starts after u has refill anti freeze. I have an Peugeot 107, shall replace water pump for first time in my life. And change thermostats.

    • @aaanton11
      @aaanton11  9 месяцев назад

      Fan starts somewhere around 90 degrees, the water pump is a nice job, Thanks for the great comments👍🏻👍🏻🛠

  • @ukcitizen1158
    @ukcitizen1158 3 года назад

    Nice Rims!

    • @aaanton11
      @aaanton11  3 года назад

      This video is all about them, ruclips.net/video/IjdEhu_2j3w/видео.html

  • @lampjeslichtontwerp
    @lampjeslichtontwerp 4 года назад

    was a great help...tnx !!!!!

    • @aaanton11
      @aaanton11  4 года назад

      You're welcome!, Thanks for the great comments👍🏻👍🏻🛠

  • @voodoobantu758
    @voodoobantu758 3 года назад

    Bloody brilliant thankyou 👍. Still looks bloody awkward though.

    • @aaanton11
      @aaanton11  3 года назад

      It’s not a bad job, Thanks for the great comments👍🏻👍🏻🛠

  • @hollandiadj
    @hollandiadj 5 лет назад

    men o men this helped me so much! thank you!!!!!!

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments 👍🏻👍🏻🛠

  • @jamiecleeves7921
    @jamiecleeves7921 2 года назад

    brilliant mate

    • @aaanton11
      @aaanton11  2 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @davidfrederickyelland9233
    @davidfrederickyelland9233 Год назад

    Can I ask please - Is it normal for the alternator not to turn by hand? I'm not sure whether it's my water pump or alternator that's the problem. Any help would be great thanks

    • @aaanton11
      @aaanton11  Год назад +2

      Alternator is shot should spin freely Thanks for the great comments👍🏻👍🏻🛠

  • @gamesmakehappy5949
    @gamesmakehappy5949 4 года назад

    Recently had water pump changed at a local garage. 2 weeks later the battery wouldn't charge, temperature becoming an issue. I assume it's the belt that's gone and needs doing but shouldn't they have spotted that?

    • @aaanton11
      @aaanton11  4 года назад

      The belt might have been too tight, Thanks for the great comments👍🏻👍🏻🛠

  • @underdogunchained
    @underdogunchained 2 года назад

    Is it a routine part of the process to change the drive belt when replacing the pump?

    • @aaanton11
      @aaanton11  2 года назад

      only if it is worn, Thanks for the great comments👍🏻👍🏻🛠

    • @underdogunchained
      @underdogunchained 2 года назад

      @@aaanton11 Changed the water pump today. It was a git of a job. The top bolt on mine required an Allen key to get it removed. Didn't give me much leverage, but managed to crack it open. Then started the engine after putting everything back together and discovered I'd not tightened the belt enough so had to struggle getting the adjuster bolts undone from the bonnet 🤬. Think it's been a success overall. Will see when I take it for a ride tomorrow. 🤞🏻😆

  • @boblolo3977
    @boblolo3977 3 года назад +1

    Great video.
    Use jack stands ! What god is a new water pump if the car kills you.
    By the way, you could add Yaris to the title mine has the same 1KR-FE engine.

    • @aaanton11
      @aaanton11  3 года назад

      I have a jack with a safety lock, so no need for stands, if I am lying under the car I will always use a stand too, Thanks for the great comments👍🏻👍🏻🛠

  • @StellaMk6
    @StellaMk6 4 года назад

    I saw at 1:26 you jacking the car up in a different place other than the sills, where did you jack it up from, my sills are corroded and im frightened that they will break and the jack will end up inside the car? Cheers

    • @aaanton11
      @aaanton11  4 года назад

      The best place to jack is under the front subframe, the thick metal frame, Thanks for the great comments👍🏻👍🏻🛠

  • @curtis8516
    @curtis8516 3 года назад

    Would you consider doing a video on rust prevention, prime spots etc.?

    • @aaanton11
      @aaanton11  3 года назад

      Yes I will add it to the list, great suggestion, Thanks for the great comments👍🏻👍🏻🛠

  • @keithletheren196
    @keithletheren196 3 года назад

    Could you do this job with ramps instead of a jack?

    • @aaanton11
      @aaanton11  3 года назад

      Ideally the wheel needs to be removed, Thanks for the great comments👍🏻👍🏻🛠

  • @underdogunchained
    @underdogunchained 5 лет назад

    Brilliant 😁I got a C1 so this may come in handy. Is the noise from the water pump caused by worn bearings?

    • @aaanton11
      @aaanton11  5 лет назад

      Yes, everything was fine after repair, thanks for the great comments 👍🏻👍🏻🛠

  • @bigman-fb8xy
    @bigman-fb8xy 3 года назад

    Thank you

    • @aaanton11
      @aaanton11  3 года назад +1

      You're welcome Thanks for the great comments👍🏻👍🏻🛠

  • @thomassayburn2469
    @thomassayburn2469 3 года назад

    Hi, I think my water pump needs replacing cos it's making a noise that area its not squealing(fan belt), so do you think it needs replacing

    • @aaanton11
      @aaanton11  3 года назад

      More than likely Thanks for the great comments👍🏻👍🏻🛠

  • @paulsha9582
    @paulsha9582 3 года назад

    I have a question, I have a peugeot 107 I have been getting a slight squeel when taking off in 1st gear and changing to 2nd, and hill starts when I have to give it more revs. I changed the alternator belt and it seemed to squeel less at first but now it's getting worse again. This only seems to happen if I drive it hard. Could it be the clutch bearing? This doesn't happen in all gears. Thanks for your help

    • @aaanton11
      @aaanton11  3 года назад

      Unlikely to be the clutch bearing, might be the exhaust Flexi joint squeaking, Thanks for the great comments👍🏻👍🏻🛠

    • @paulsha9582
      @paulsha9582 3 года назад

      @@aaanton11 thanks for your reply. I did an experiment and noticed it only does the squeel when rpm is above 2k. If I rev above 2k in neutral and let clutch out it doesn't do it.

  • @leecullen702
    @leecullen702 4 года назад

    Hi, Great and useful videos!!! Can I ask a question? Do you ever need to change or stop up the gear box oil on a citroen c1? Thanks 👍🏻

    • @aaanton11
      @aaanton11  4 года назад +1

      The gearbox is filled for life, but if you have a leak, or the gearbox is removed it is worth changing or checking it, Thanks Lee for the great comments👍🏻👍🏻🛠

  • @Paul_VanGo
    @Paul_VanGo 4 года назад +6

    The old waterpumps actually were part of a recall, exactly because of that reason. The pressed plate housing warps. Surprised it held this long.
    Oh, and by the way, the block actually has a coolant drain, just right beside the pump.

    • @aaanton11
      @aaanton11  4 года назад +2

      Thanks Paul for the great information👍🏻👍🏻🛠

    • @marcothalow
      @marcothalow 4 года назад +1

      Do you know when they changed to the newer waterpumps?

    • @JoaKimzen
      @JoaKimzen 3 года назад

      Do you know if the 2010 cars also came with these waterpumps?

    • @Paul_VanGo
      @Paul_VanGo 3 года назад +1

      It's easy to recognise; the new one is cast alloy.
      I can't remember when they OEM changed them.

  • @Olisoon11
    @Olisoon11 3 года назад

    Hi
    How many km should we changed water pump ? your advice

    • @aaanton11
      @aaanton11  3 года назад

      they can last forever, no set distance, Thanks for the great comments👍🏻👍🏻🛠

  • @puru554
    @puru554 4 года назад

    Hello sir can you tell me where is the brake oil reservoir on this car?

    • @aaanton11
      @aaanton11  4 года назад

      I show it in this video, ruclips.net/video/j6frAY_ZTfM/видео.html Thanks for the great comments👍🏻👍🏻🛠

  • @FrazeBigs
    @FrazeBigs 4 года назад

    Anyone know if you can get replacement AC pulleys? I had a spare water pump so fitted, as per this great video (the Aygo has a few different square wheel liner clips that are bloody fiddly to remove) but I still have an odd noise and on further inspection the noise appears to be coming from the AC pulley area. So far I can only find replacement AC pumps which cost £300 odd and I'd also need to get the AC gas removed and refilled. Anyone pulled the AC pulley off and fit a new bearing or is that not possible? Seems you can on some makes but I've not found details for C1/107/Aygo. Cheers 🍻

    • @aaanton11
      @aaanton11  4 года назад

      I have only replaced the complete compressor, not the outer bearing and pulley on this model, sorry, Thanks for the great comments👍🏻👍🏻🛠

    • @FrazeBigs
      @FrazeBigs 4 года назад

      @@aaanton11 thanks for the speedy reply. As a short term solution, is it possible to fit a non AC aux belt and thereby bypass the AC pump?

    • @aaanton11
      @aaanton11  4 года назад

      You will need to remove the ac compressor then fit the shorter belt Thanks for the great comments👍🏻👍🏻🛠

  • @volt8684
    @volt8684 2 года назад

    U save me and my daughters££££s thanks

    • @aaanton11
      @aaanton11  2 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @sebastienkuhni6046
    @sebastienkuhni6046 6 месяцев назад

    Hello, at 26:56, we can hear a sort of friction noise. I have a similar sound on my city bug sometimes. If anyone has an answer as to where it comes from, it would be great. Otherwise, thanks, I enjoyed the videos

    • @aaanton11
      @aaanton11  6 месяцев назад

      All I can hear is belt noise, nothing unusual unless its louder, then it could be an worn belt, oversight belt or water pump/ alternator worn, Thanks for the great comments👍🏻👍🏻🛠

  • @kraigjackson5245
    @kraigjackson5245 3 года назад

    Is it easy to fit arfter market parking sensors to these cars? thanks

    • @aaanton11
      @aaanton11  3 года назад

      Not too bad, but do you need them these cars are so easy to park😂, Thanks for the great comments👍🏻👍🏻🛠

    • @kraigjackson5245
      @kraigjackson5245 3 года назад

      @@aaanton11 Thanks for getting back to me.. I've always had them see and wasn't sure if I would miss them 😂 I don't know much about cars either so might give it to a garage as it involved electrical work as well with fuse board?

  • @davidclark714
    @davidclark714 4 года назад

    Did this taking the front bumper off..seemed to be quite accessable. Took the thermostat out to change it and now cant get a new one in without leaking..any ideas?

    • @aaanton11
      @aaanton11  4 года назад

      is the thermostat leaking or the water pump ? Thanks for the great comments👍🏻👍🏻🛠

    • @davidclark714
      @davidclark714 4 года назад

      @@aaanton11 The thermostat is leaking and I have torqued the bolts up to the correct setting which Is apparently 9 nm. The new thermostoat seal is clearly thinner than the old one and leaks badly.
      I have put the old thermostat and seal back in and managed to reduce the leak to a drip. however to get this reduction, I have had to overtighten the bolts.

    • @davidclark714
      @davidclark714 4 года назад

      I have now sorted the leak...needed to ensure that the thermostat was properly centralised in the housing...also ground back the housing surface and metal collet to create a greater distance to compress the seal...great vids btw..thanks

    • @aaanton11
      @aaanton11  4 года назад

      great job well done 👍🏻🛠

  • @marconius101
    @marconius101 4 года назад

    You could drain the system first, but what's the fun in that.??

    • @aaanton11
      @aaanton11  4 года назад +1

      I always think you stand a chance of breaking something else, so just remove the bare minimum, Thanks for the great comments👍🏻👍🏻🛠

  • @nikitaioskevich8947
    @nikitaioskevich8947 2 года назад +1

    thanks for the video, but this is very dangerous, the jack is not intended for repair under the car, it must be put on the stop or at least put a solid object under the car. the jack can go down and there will be trouble. observe safety precautions.

    • @aaanton11
      @aaanton11  2 года назад

      This jack has a built in axle stand and cant come down until the safety is released, Thanks for the great comments👍🏻👍🏻🛠

  • @savagesam205
    @savagesam205 4 года назад

    Cool 107! What brand wheels are those if I may ask? :)

    • @aaanton11
      @aaanton11  4 года назад

      I have a video on them, ruclips.net/video/IjdEhu_2j3w/видео.html , enjoy, Thanks for the great comments👍🏻👍🏻🛠

  • @Raritful
    @Raritful 5 лет назад

    Good job there ;)
    we can notice at 26:55 the engine moving a bit
    is this normal movement or an indication of bad motor mounts?
    if so, very looking forward to their replacement :)

    • @aaanton11
      @aaanton11  5 лет назад

      Normal movement on the engine, I am sure I can find a few More jobs to do lol, thanks for the great comments 👍🏻👍🏻🛠

    • @simonpro267
      @simonpro267 5 лет назад

      That's completely normal, it's a 3 cylinder so that's why it makes such movements, if your engine would make movements the same as when you start it at 26:55 everytime then that would mean your engine's supports are going to die or are already dead

  • @steveelkins52
    @steveelkins52 3 года назад

    no torque wrench?

    • @aaanton11
      @aaanton11  3 года назад

      experience is better, Thanks for the great comments👍🏻👍🏻🛠

  • @ebebimik
    @ebebimik 3 года назад

    I hope the front brakes are next on your to do list 😅

    • @aaanton11
      @aaanton11  3 года назад +1

      Lol its in another follow up video, Thanks for the great comments👍🏻👍🏻🛠

  • @mahyarhamoun6441
    @mahyarhamoun6441 4 года назад

    THANKS

    • @aaanton11
      @aaanton11  4 года назад +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @pipinopipino5547
    @pipinopipino5547 3 года назад

    Merci merci

    • @aaanton11
      @aaanton11  3 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @mepartolacaja
    @mepartolacaja 4 года назад

    good video

    • @aaanton11
      @aaanton11  4 года назад +1

      Thanks for the great comments👍🏻👍🏻🛠

  • @ELECTROMARINEMANIA
    @ELECTROMARINEMANIA 9 месяцев назад

    Nice❤

    • @aaanton11
      @aaanton11  9 месяцев назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @andy464
    @andy464 3 года назад

    what is the mileage when water pump broken? Greetings Andy

    • @aaanton11
      @aaanton11  3 года назад +1

      70000, Thanks for the great comments👍🏻👍🏻🛠

    • @andy464
      @andy464 3 года назад

      @@aaanton11 My Toyota Aygo from 2009 (107000km) still original water pump. Thanks for your video. If my Aygo water pump breaks down, I know how to do it. Thank you very much

    • @andy464
      @andy464 3 года назад

      @@aaanton11 maybe you can video citybug, how to replace and bleed brake fluid?

  • @thomaswykes3647
    @thomaswykes3647 3 года назад

    Take it easy on those bolts because the aluminium threads in the engine block strip very easily.
    Ask me how I know...

    • @aaanton11
      @aaanton11  3 года назад

      ouch, steady as she goes, Thanks for the great comments👍🏻👍🏻🛠

  • @mowoggreen1164
    @mowoggreen1164 3 года назад

    No axle stand ?????? brave man !!!!

    • @aaanton11
      @aaanton11  3 года назад

      The jack has a built in axle stand, Thanks for the great comments👍🏻👍🏻🛠

  • @barryjones1036
    @barryjones1036 5 лет назад

    thank you great

    • @aaanton11
      @aaanton11  5 лет назад

      Thanks for the great comments 👍🏻👍🏻🛠

  • @wynrichards-ul3bf
    @wynrichards-ul3bf Год назад

    Where's your axle stand

    • @aaanton11
      @aaanton11  Год назад

      The jack I use in this video had a built in axle stand, very handy Thanks for the great comments👍🏻👍🏻🛠

  • @keltoummoustefaoui8834
    @keltoummoustefaoui8834 4 года назад

    Bonjour Monsieur je vous remercie pour vos vidéos, même que je ne suis pas anglophone, mais j’arrive à comprendre par vos gestes .
    Svp j’ai une Citroën C1 , et je veux purger le liquide de refroidissement ( Radiateur) , mais malheureusement je n’arrive pas à trouver les valves et durite. Pourrez-vous m’aider svp? Par une vidéo, je vous remercie par avance. Cordialement.

    • @aaanton11
      @aaanton11  4 года назад +1

      merci la meilleure façon de vidanger le liquide de refroidissement est de déconnecter le tuyau de radiateur inférieur, ou si son contenu antigel que vous souhaitez améliorer, regardez cette vidéo, ruclips.net/video/5Hfiqa0gvhQ/видео.html Thanks for the great comments👍🏻👍🏻🛠

    • @keltoummoustefaoui8834
      @keltoummoustefaoui8834 4 года назад

      Merci bien . Et bonne continuation. Cordialement.

  • @mrhaltstop2294
    @mrhaltstop2294 3 года назад

    To finish the job the motor must be brought to its working temperature until the electric cooling fan engages

    • @aaanton11
      @aaanton11  3 года назад

      Thanks for the great comments👍🏻👍🏻🛠

  • @graemebaird170
    @graemebaird170 5 лет назад

    I got a squealing fan belt, it's been tightened twice already, 1 by arnold Clark and again by local kwikfit. Any advice on how to stop it for good?

    • @aaanton11
      @aaanton11  5 лет назад +2

      Change the belt, but I would suspect the water pump is also worn, thanks for the great comments 👍🏻👍🏻🛠

  • @docker82
    @docker82 5 лет назад +1

    Why did you do work on a car with no axle stands and wheel wedges? Not being a OCD captain safety but I would never work on a vehicle only supported on a 1 tonne trolley jack because if it fails well you know what will happen.

    • @aaanton11
      @aaanton11  4 года назад

      Thanks for the concern, I have a fantastic jack with a safety lock, and always use a axle stand if I am working under the vehicle, I don't remember going under the car on this job, but Thanks for the great comments👍🏻👍🏻🛠

  • @philipbunker146
    @philipbunker146 2 года назад

    That oil filter looked a bit old

    • @aaanton11
      @aaanton11  2 года назад

      Thanks for the great comments👍🏻👍🏻🛠