Hello there, I hope your are all doing so fine! I just to tell you that I listened to your advice and it worked fantastic! You are the super man thank you
This worked great. I have the vtech model vm3258 PU. I bought another camera and monitor and wanted to link both to 1 parent unit. I knew it was possible as they sell the same model with 2 units. Side note cameras cannot transmit two signals. example, I can not have 2 monitors paired to 1 camera. It will automaticly unpair from the other monitor. If you want to delete a pair, because you cant pair over an established link, instead of pressing the back arrow and talk you press forward arrow and talk. This will free up the camera slot that you are currently viewing. so when you try to pair again it becomes available.
Thanks for this we have to get a new parent unit and needed to pair with the old cameras. Vtech doesnt even provide instructions on how to do this. Dont ask me why
True. I emailed them, they said there is no solution except repair by vtech or replacement. But that was not the vase, it got paired. Either they didnt know or they didnt want to share this info.
Tried the same on an RM5754 (menu+back and/or menu+zoom and/or back+zoom) but none of those combinations seems to start pairing sequence on the monitor side :(
Hello, I bought a vtech baby camera and it hasn't been a month since my alarm goes off when the room temperature is 23 degrees. How can I adjust this or is there a problem with the camera? I would appreciate it if you could help me.  😔
Yes thats pretty easy. Press menu, and then selecte menu of baby face like (detection) icon, next temperature, then turn on temperature alert, and then set the minimum and maximum temperature setting. If it still does lnt resolve the issue then you mau share the model number of you vtech camera. What i topd is a pretty standard setting in newer vtech models
Hola! tengo el modelo 2251 el botón de encendido de cámara es para deslizar no para presionar y el monitor hago lo mismo que tú pero solo me aprece un check y un spam. ayuda!!
Logre presionar el botón de emparejamiento y buscar la cámara pero aselecionar la opción 2,3 y 4 que son las únicas que me sale, todas arrojan el triángulo de error
I think it's battery is problematic, if you connect the charger and the issue is resolved then it's battery. Otherwise there could be interference from other devices around.
Hello there, I hope your are all doing so fine! I just to tell you that I listened to your advice and it worked fantastic! You are the super man thank you
Wonderful! So happy it worked, Thank you for feedback
Your video was helpful, thank you!
You're welcome!
This worked great. I have the vtech model vm3258 PU. I bought another camera and monitor and wanted to link both to 1 parent unit. I knew it was possible as they sell the same model with 2 units.
Side note cameras cannot transmit two signals. example, I can not have 2 monitors paired to 1 camera. It will automaticly unpair from the other monitor. If you want to delete a pair, because you cant pair over an established link, instead of pressing the back arrow and talk you press forward arrow and talk. This will free up the camera slot that you are currently viewing. so when you try to pair again it becomes available.
Thank you so much for this response. Very elaborate instructions
Yes the slot is used after pairing even though only 1 camera is connected. It will help many
Thank you. Worked!!
Glad it helped
Muito obrigado! Salvou as noites aqui 👏🏼💪🏼
🤗 welcome
Thanks for this we have to get a new parent unit and needed to pair with the old cameras. Vtech doesnt even provide instructions on how to do this. Dont ask me why
True. I emailed them, they said there is no solution except repair by vtech or replacement. But that was not the vase, it got paired. Either they didnt know or they didnt want to share this info.
Phuong Le Chau 接下來了!感謝🙏❤
還是感謝🙏❤11/20/23
Thanks for comment
Buenas tardes, tengo una unidad VC 2105 y es imposible conectar camara y la unidad. Agradezco cualquier ayuda que me pueda ofrecer.
Tried the same on an RM5754 (menu+back and/or menu+zoom and/or back+zoom) but none of those combinations seems to start pairing sequence on the monitor side :(
Hello, people have offered solution in comments of this video also. Go through comments here ruclips.net/video/5dJVMR6ROsc/видео.html
i cannot pair my vtech RM5764HD cannot connect to the camera no signal what to do ?
Hi. This appears to be a wifi version. I did not have my hands on this particular model so cant say for sure
Hello, I bought a vtech baby camera and it hasn't been a month since my alarm goes off when the room temperature is 23 degrees. How can I adjust this or is there a problem with the camera? I would appreciate it if you could help me.

😔
Yes thats pretty easy. Press menu, and then selecte menu of baby face like (detection) icon, next temperature, then turn on temperature alert, and then set the minimum and maximum temperature setting. If it still does lnt resolve the issue then you mau share the model number of you vtech camera. What i topd is a pretty standard setting in newer vtech models
Good luck and happy parenting, you are so brave
Hola! tengo el modelo 2251 el botón de encendido de cámara es para deslizar no para presionar y el monitor hago lo mismo que tú pero solo me aprece un check y un spam. ayuda!!
Logre presionar el botón de emparejamiento y buscar la cámara pero aselecionar la opción 2,3 y 4 que son las únicas que me sale, todas arrojan el triángulo de error
Hi did your issue get solved
Hola tengo la misma cámara, ¿Cómo lograste presionar el botón así?
@brendapuquio3886
My vtech camera keeps going offline, how to fix it?
I think it's battery is problematic, if you connect the charger and the issue is resolved then it's battery. Otherwise there could be interference from other devices around.
Did not work.
Oh good luck