== 🕐 Time Stamps - Cut to the action 🕕 == 00:42 - Download available with the link in the description 02:24 - Wiring diagram using the conduit loop in method one light controlled via 2 way switching 04:30 - Using a circuit diagram to help with our wiring diagram 05:58 - Adding the neutral to our lighting circuit wiring diagram 07:16 - Adding the CPC's to our lighting circuit wiring diagram 08:59 - Adding the permanent line and strappers to our lighting circuit wiring diagram 11:35 - Adding another lighting point to our 2 way switched wiring diagram
I’m a quite new to all of this but I don’t understand how it turns the light on if you didn’t run a switch line you just had a permanent line from the switch to the light?
I was taught to add an extra line conductor with the strappers ,that way the feed and the switching line can be in the same light switch. The feed to the common and the switch line to L1 or L2
I thought most people now recommended bringing a neutral to the switch for future proofing and testing/troubleshooting. Is that not required here because with singles and it would be so simple to run a neutral at the time it was needed or something else?
@@GSHElectrical It was more of a question, really. Are you saying you wouldn't run a neutral to the switch here as there isn't a need for future proofing, as adding at a later date is simple in singles and conduit?
I think I missed one. But good video regardless. I especially liked the "extend this to more points" talk at the end. How sometimes trying to be more efficient with the cables may not always be the best practice and cause confusion in the future.
It was fairly common in the late 50s early 60s to find houses wired using the loop in method. The only difference was because they were not wired in conduit the electrician used double insulated singles . The only twin lighting cable in the whole house was the strips between the 2 way switches in the hall and landing . Also no earth in those days
What if my light fixture is a fully insulated LED batton light pre wired with only live and neutral wires coming from light fitting? Currently wiring my own garage but will be getting an electrician neighbour to look after the CU and testing and final power up.
== 🕐 Time Stamps - Cut to the action 🕕 ==
00:42 - Download available with the link in the description
02:24 - Wiring diagram using the conduit loop in method one light controlled via 2 way switching
04:30 - Using a circuit diagram to help with our wiring diagram
05:58 - Adding the neutral to our lighting circuit wiring diagram
07:16 - Adding the CPC's to our lighting circuit wiring diagram
08:59 - Adding the permanent line and strappers to our lighting circuit wiring diagram
11:35 - Adding another lighting point to our 2 way switched wiring diagram
So amazing sir continue the good teachings am a student.
Thanks for these videos. Your are a great teacher
Thanks for the great comment Dave 👍🏻
Very good illustration. step by step good teaching.
Thanks for commenting and watching
Holle see fixtures 🤞🤞🤞🤞
Well explained ❤
Thanks 👍🏻
Very easy job⚡️
Excellent 👌
Thanks 👍🏻
Fabulous video 👍👍👍
Massive thanks 👍🏻
I would never have thought it would need to be different if it was in conduit 🤷
Suppose that's where you come in handy 😁
I’m a quite new to all of this but I don’t understand how it turns the light on if you didn’t run a switch line you just had a permanent line from the switch to the light?
It has. Thank you
Thanks for commenting and watching 👍
I'm sure when wiring strappers they have to go to the same respected terminals in the second switch you can cross over from L1 to L2 and vise versa.
I was taught to add an extra line conductor with the strappers ,that way the feed and the switching line can be in the same light switch.
The feed to the common and the switch line to L1 or L2
I thought most people now recommended bringing a neutral to the switch for future proofing and testing/troubleshooting. Is that not required here because with singles and it would be so simple to run a neutral at the time it was needed or something else?
I agree with your comment Dave
@@GSHElectrical It was more of a question, really.
Are you saying you wouldn't run a neutral to the switch here as there isn't a need for future proofing, as adding at a later date is simple in singles and conduit?
I think I missed one. But good video regardless.
I especially liked the "extend this to more points" talk at the end.
How sometimes trying to be more efficient with the cables may not always be the best practice and cause confusion in the future.
Wiring Diagram Conduit Loop-In Method Part 6 - Lighting Circuits PVC Singles - 2 Way & Intermediate ruclips.net/video/DQHO5zflXe0/видео.html
It was fairly common in the late 50s early 60s to find houses wired using the loop in method.
The only difference was because they were not wired in conduit the electrician used double insulated singles . The only twin lighting cable in the whole house was the strips between the 2 way switches in the hall and landing .
Also no earth in those days
Thanks Andy for your detailed input 👍🏻
What if my light fixture is a fully insulated LED batton light pre wired with only live and neutral wires coming from light fitting? Currently wiring my own garage but will be getting an electrician neighbour to look after the CU and testing and final power up.