Thank you soooo much for sharing this … I’ve been wanting to make stickers , watched lots of RUclips videos and I think yours is the best so far 🥰 thank you again
Hi. I followed all your directions and did it. Thank you. The only thing you didn’t mentions was that I had to make sure to calibrate my Cricut first but that’s ok. Got it done. Thank you!
Super helpful video for beginners. It really does break things down into baby steps, which is really very helpful. I am not a total beginner, but I even learned something from this. A good watch.
@@traceychivers1988 you got to get that out of the box!!! 😂 I have a video that suggests a few things to get if you are new to Cricut! You should check that out.
Great video...was hoping you would guide us through the cut settings process as well though. Thats where im getting issues. Not sure what settings to use
@@Jrmobileweldingservices I don’t put the cut settings due to people using different papers, laminates etc.. which ones are you using? I may be able to help ya.. need the cut setting, machine,, and brand of paper and laminate.
@@Mariahelpedmemakeit I'm looking for this as well! I have a transparent laminate on top of regular sticker paper and i cant seem to cut all the way through. I just purchased a deep point blade hoping this will help. Great video!!
@@BrianneRoselle it depends on the sticker paper.. some like StarCraft, (even cricut the older ones) are super thick so if you put a laminate on them the setting would be different… also if you are using the create a sticker feature the setting will be different.. if you are using a brand comparable to koala, or my favorite aiva and a laminate.. I would choose cardstock adhesive backed. One of the things I recommend is lowering the pressure and setting it for 2 passes. My next bit and probably the most important bit of advice besides the cut setting would be to lift a corner before you eject the mat to check to see if the stickers have been cut through. If they haven’t hit the cut button again and repeat the process.
@Mariahelpedmemakeit it basically tells me that it can't read the stickers, I have the explore air 2 and the only sticker paper I've been able to use is regular matte sticker paper i can't get any kind of glossy or waterproof to work at all it errors out reading it 😫
Good Morning, Hello how you doing on this morning . Im on RUclips look at how you make stickers on the Cricut app. I want learn to do the stickers for wedding box . I will desgin on the Cricut app but keep said the paper jam . Can tell me what I'm do wrong that the paper is not read .
Oh my gosh thank you so much! 😊 I’m blushing.. 🙈 i truly appreciate your comment! I do sell sticker sheets.. one of the next few videos I will be putting out is how to make a sticker sheet in design space without using any uploaded images.. I have 3 other videos to upload first but I can definitely get this one somewhere in between.. 😊 thank you for subbing 😊
@@MaryClark-xi7ev I appreciate your compliment.. the primary reason as to why I don’t share my cut settings is due to different thickness of papers.. if I suggest something and it doesn’t work people might be upset.. if you tell me what paper you are using I can suggest what you can try. 😊
Thank you for responding so quickly!! 💜 I keep trying to recut 😭 I think with each pass it’s getting a little better. I also used the cricut access make a sticker - I think your way is better!
@@BrianneRoselle I made a video that I don’t want to release because I feel people will get mad at it.. it basically teaches you how to use the feature.. then I break it down as to why I would never.
Thank you soooo much for sharing this … I’ve been wanting to make stickers , watched lots of RUclips videos and I think yours is the best so far 🥰 thank you again
@@suemartin8613 thank you so much! I’m glad it helped you. 😊
Thank you so much for this! Very educational and the best I’ve seen yet on this subject!
@@Sandisue thanks so much means a lot to me! I’m working on more content!
Just found you, thank you for explaining everything so easy and straightforward
@@mkstargirl you are welcome!
Hi. I followed all your directions and did it. Thank you. The only thing you didn’t mentions was that I had to make sure to calibrate my Cricut first but that’s ok. Got it done. Thank you!
@@bettymedina2767 awesome.. was it your first time making stickers?
This is the absolute BEST sticker tutorial that I have come across ❤ thank you so much!!
@@sandymorris9564 oh my gosh thank you so much! I’m glad to hear this!! 😊
Your style of explaining things is very straightforward and appreciated. Thank you
My goodness thank you. I sometimes worry about how I come across! I am happy you loved the video! Thanks a bunch.
You have the best directions and I’ve tried so many. Thank you
@@melissapacifico8279 thank you soo much
This was so easy to follow! I am a 100% beginner at this never used a Cricut before and my stickers came out incredible. Thank you so much!!!
I am so glad! Yay you did it!!
This is a great video & my stickers actually worked out for the first time.
@@blaanch2 I’m glad!! 😃
@@Mariahelpedmemakeit except they didn’t cut I must’ve missed a step
@@blaanch2 did you check before ejecting the mat?
@@Mariahelpedmemakeit yes I did.
@@blaanch2 what setting did you use?
Super helpful video for beginners. It really does break things down into baby steps, which is really very helpful. I am not a total beginner, but I even learned something from this. A good watch.
My goodness this makes me happy! Thank you for your comment!
Thank you! Great explanation and info!!
My pleasure!!!❤
Thank you so much for the wonderful tutorial! It really helped me! ❤
I am so glad to hear it! Thank you!
Thank you ❤
thanks for video very helpful
You are very welcome!!
My stickers didn’t cut all the way through. What kind of paper did you use?
Thank you for a easy video to follow mine is still in the box and I don't know what to make wil definitely be watching your videos ❤
@@traceychivers1988 you got to get that out of the box!!! 😂 I have a video that suggests a few things to get if you are new to Cricut! You should check that out.
What setting do you use ? Mine always cut too deep even with less pressure. I use the sticker setting
Whenever I try to use the holo lay over it, it goes all over the place. It never matters how neat i do it 😭😭😭😭😭😭
Oh I'm sorry,, It took me forever to learn how not to get bubbles. once I did it was easy sailing. Hopefully it will get easier for you.
Which cut settings die you use?
For the sticker paper that I use I recommend cardstock adhesive backed.
@@Mariahelpedmemakeit thank you so much 😊 do you have a link for the glitter laminate sticker paper?
@@julienelissen9482 lately they have been coming in yellow. You can try koala brand or teckwrap. Those will be the next ones I order.
Great video...was hoping you would guide us through the cut settings process as well though. Thats where im getting issues. Not sure what settings to use
@@Jrmobileweldingservices I don’t put the cut settings due to people using different papers, laminates etc.. which ones are you using? I may be able to help ya.. need the cut setting, machine,, and brand of paper and laminate.
@@Mariahelpedmemakeit I'm looking for this as well! I have a transparent laminate on top of regular sticker paper and i cant seem to cut all the way through. I just purchased a deep point blade hoping this will help. Great video!!
@@BrianneRoselle it depends on the sticker paper.. some like StarCraft, (even cricut the older ones) are super thick so if you put a laminate on them the setting would be different… also if you are using the create a sticker feature the setting will be different.. if you are using a brand comparable to koala, or my favorite aiva and a laminate.. I would choose cardstock adhesive backed. One of the things I recommend is lowering the pressure and setting it for 2 passes. My next bit and probably the most important bit of advice besides the cut setting would be to lift a corner before you eject the mat to check to see if the stickers have been cut through. If they haven’t hit the cut button again and repeat the process.
Perfect tutorial for me to follow, do the stickers have a backing to peel off before you attach them to something?
They do have a backing. I will be working on an easy peel video soon.
Do you have a video explaining if it gives you errors before it cuts 😅
@@jessicatroyer4901 I know a lot about errors what error are you getting?
@Mariahelpedmemakeit it basically tells me that it can't read the stickers, I have the explore air 2 and the only sticker paper I've been able to use is regular matte sticker paper i can't get any kind of glossy or waterproof to work at all it errors out reading it 😫
@@Mariahelpedmemakeit also do u have any other social media i can follow your videos are super helpful ❤️
@@jessicatroyer4901 have you tried adding some scotch tape over the registration lines?
@@Mariahelpedmemakeit I've tried literally everything 🫠
Good Morning, Hello how you doing on this morning . Im on RUclips look at how you make stickers on the Cricut app. I want learn to do the stickers for wedding box . I will desgin on the Cricut app but keep said the paper jam . Can tell me what I'm do wrong that the paper is not read .
Hello !!! if the paper is jamming it could be that it is too thick for your printer.. What brand of sticker paper are you using?
Just found your channel. I like that you are so through. Great teacher. Do you sell sticker sheets? Can you show us how to do that? I subbed! ❤😊
Oh my gosh thank you so much! 😊 I’m blushing.. 🙈 i truly appreciate your comment! I do sell sticker sheets.. one of the next few videos I will be putting out is how to make a sticker sheet in design space without using any uploaded images.. I have 3 other videos to upload first but I can definitely get this one somewhere in between.. 😊 thank you for subbing 😊
Why do I not get as many color options? Like when you did the offset?
@@janettagagnon3245 do you have a plus sign at the bottom of the color choice?
Nice tutorial. I am guessing you can use your own graphic and not have to have Access? Thanks.
@@4shore325 sure can! Thank you for the compliment!
What is the setting cut?
@@creationsannamee69 the setting that I use for the sticker paper/vinyl and laminate shown in the video was laminated cardstock adhesive backed.
What exactly is contours again?
@@tammymooney3673 if you go to 06:50 of the video it will explain it to ya a bit. Let me know if you need more explanation. 😊
Oh! Awesome tutorial. Can I have the same result in Cricut Joy? :)
@@claudyaguerr as far as I know the joy won’t cut stickers do you mean the joy xtra?
@@Mariahelpedmemakeit Thanks for clarify!
Great tutorial except for not indicating the best cut settings to use which was what I was primarily looking for.
@@MaryClark-xi7ev I appreciate your compliment.. the primary reason as to why I don’t share my cut settings is due to different thickness of papers.. if I suggest something and it doesn’t work people might be upset.. if you tell me what paper you are using I can suggest what you can try. 😊
The self adhesive laminate is definitely a thicker sheet! Checking before removing from the mat is a huge help!
Thank you for responding so quickly!! 💜 I keep trying to recut 😭 I think with each pass it’s getting a little better. I also used the cricut access make a sticker - I think your way is better!
@@BrianneRoselle I made a video that I don’t want to release because I feel people will get mad at it.. it basically teaches you how to use the feature.. then I break it down as to why I would never.
@@BrianneRoselle If I get the notification and I’m free I will always try to respond as quickly as possible. For as long as I can!