DIY HOW TO FLUSH A HEATER CORE ON A E90 BMW
HTML-код
- Опубликовано: 23 дек 2021
- N THIS VIDEO I SHOW YOU HOW TO FLUSH YOUR HEATER CORE. IT WILL APPLY TO A LOT OF CARS. THE SIZE OFTHE HOSES THAT I USED WAS A 5/8 AND A 1/2 INCH HOSE. SO I FLUSHED IT AND IT'S WORKING PERFECTLY NOW. PLEASE LIKE, SHARE AND SUBSCRIBE. STAYED TUNED FOR MORE VIDEOS TO COME. #HEATER#CORE
Great idea about using the clear hose. I ended up using those and a flush kit (for garden hose connector) and it worked wonderfully!
Ok great! I'm glad you found this video helpful.
Perfect video man from start to finish taught me exactly what to do saved me tons of money and time taking my dash apart !!
It’s really good to know that I could save you a ton load a money
Nice simple fix thanks for the video man. About to do this to mine, thermostat was changed out because it was stuck but still no heat!
Okay thank you, I appreciate that.Yes that's worked for me so you can always go ahead and do that whenever you're ready. Feel free to ask me an questions if you have them.p
Right on good video man! thank you for posting this
Oh thank you you're welcome
You’re the best man.
Thank you bro appreciate that👍
Bless up fada. Trying this this weekend
Bless up sounds good
brilliant video simple instructions
Thank you👍
That's kool
Yes yes
nice
Thank you
I have what looks like metal bits in my coolant tank (just purchased the car), from reading up its possibly from the water pump going, after doing a test on the water pump looks like it’s functioning properly, my theory is it’s from the previous water pump going then it was replaced, I’m yet to diagnose properly, when I have time I’m going to do a thorough check, but just an idea of where the shiny bits have come from, I’m hoping it’s not from a stop leak or head gasket sealer since that would mean far more serious issues then I’d like.
There’s also no heater what so ever, I’m thinking clogged heater core, apparently a common issue on bmws (this is my first bmw). I’ve also found the power steering fluid to be sparkling, clearly tiny bits of metal, I’m hoping it’s just normal wear & they’ve negated to change the fluid (190k kms), which I plan to do a flush on since the power steering system seems to be functioning properly. Thanks for the video, although personally I probably would have run the hoses under the car to prevent any larger particles/clumps from having to fight gravity to pump up the hose, over the engine bay & into the bucket, especially since the water pressure doesn’t seem fantastic, that’s just me speculating though.
I would recommend that you go ahead and flush the heater core but do not turn up the water pressure too high because it will blow out the hose from under the dashboard that’s connected to the heater core….
I have a 2006 e90 I have Change the blower the blower module the thermostat and still nothing maybe the heater core is clogged
Yes I think so it is a common problem
Thanks I done a flush an now there's heat . Thanks
NICE! I'm glad you found this video helpful. And that it worked for you.
This is an excellent video but i noticed you cut out the part where you actually cleared the clog. What did you do ? Showed the metal bits and how it was stucknand barely coming out. Next part is putting it back together?
OK thank you just reversible
@DrewFagonMotors awesome, thank you for the reply too.
@@mikes8207 ok you’re welcome
I have a question hopefully you can reply me back asap ! I own a 2006 325xi last month I change the water pump and thermostat bc It was leaking antifreeze/coolant, now is leaking once again ! But it leaks when I turn on the heater mind you the heater doesn’t work do you think I have to change my heater core ? Or it might be something else ? Do I have to unclogged like you did ? Please help me !!
That sounds like you're going to have to get the system pressurized so you can figure out where the leak is coming from
Prob was the radiator
Hey, great video man! Quick question:) I have e91 2007 2.0 petrol and I have heat only on the passenger side( I’m in UK ) and only cold from the driver side, doesn’t matter which setting I use. What could be the reason
Thanks man keep it up
It could be the Glenn door actuator
Thank you
Question boss that hose that goes to the heater core did you say it splits in two? @ 1:47
Or are they two different hoses?
Oh I'm sorry if I didn't say that right. They are 2 different hoses. One on the top and one on the bottom. Both of them go one place, at the fire wall.
Would be the same if my bmw is 325i e 92? 2006
Yes 👍
How to know if the thermostat is working?
CHECK THE COOLANT TEMPERATURE TO SEE IF IT'S GOING UP TO OPERATING TEMPERATURE. YOU CAN GET A CODE READER AND SCAN THE SYSTEM AND SEE IF YOU SEE ANY FAULTY CODES. TYPICAL OBVIOUS SYMPTOMS OF A FAILING THEMOSTAT IS THAT YOUR CAR WILL OVERHEAT.
If My Passenger Side Always Blows Cold Air And My Driver Side Blows Hot Air. Could This Be The Issue? Clogged Heatercore?
No, that sounds like the blend door actuator because it's already getting heat on one side, so the heat is working.
Have the same problem did u find a fix yet?
@@fernandogonzalez-le1zx was told that it’s possible the heater core could be partially clogged. I am 90% Sure that’s it but haven’t had a chance to fix it due to the process of switching it is pretty much remove your whole dash.
@@Toxic_N52 thx try flushing it it might fix it
@@fernandogonzalez-le1zx was Thinking Of Doing That But Not Sure How
I’m not getting heat and my pump is not turning on 🤦♂️
Sorry to hear that. Maybe you need to replace the pump. I hope you are able to get it fixed.
bro what the hell are you trying to show? put the camera a bit back so that people can see which part of the car you are working on.
This video already posted a long time ago
Car is overheating too
Ok
I replaced my water pump 5 years ago bmw sucks 😂😂
I know