Upgrading my front control arm bushings to POWERFLEX POLYURETHANE Bushings! **USED A VISE**

Поделиться
HTML-код
  • Опубликовано: 11 дек 2020
  • Instagram: @awzkar_
    awzkar_?hl=en
    Link for the bushings:
    Front:
    www.ecstuning.com/b-powerflex...
    Rear:
    www.ecstuning.com/b-powerflex...
  • РазвлеченияРазвлечения

Комментарии • 36

  • @jamiemclachlan19
    @jamiemclachlan19 3 года назад +3

    Looking at the front of your TT it looks very similar to mine. I did paint the bottom grills gloss back, and also the headlight inserts I chose to go tinted for the indicator lenses. Its a good look 👌

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад

      Im going to add an Sline bumper soon! Gonna do gloss black aswell! “Phantom black” its gonna be a nice look forsure!!!

    • @vivaansoren7904
      @vivaansoren7904 2 года назад

      instaBlaster

  • @raytolleyoo
    @raytolleyoo Год назад

    Thanks bro I gotta replace my droplinis on my fr Leon may aswell Polybush it while I'm under their

  • @jasonm.1370
    @jasonm.1370 2 года назад +2

    my dude is a savage. there is something called a bushing press

    • @xNachoPandaXx
      @xNachoPandaXx  2 года назад +5

      Ghetto Garage 🤘🏼🤷🏽‍♂️

  • @FilipFelli
    @FilipFelli 2 года назад

    More on those brake kit ?

  • @stop116
    @stop116 2 года назад

    Hoping for your reply: How's about Drop links, ball joints and tie rods? Do they survived the stiffness?
    upgraded sway bar and wishbone with poly bushes, but weeks after suspension started to clunk.. Just wondering it's because of new bushes or normal wear and tear

    • @xNachoPandaXx
      @xNachoPandaXx  2 года назад

      So for ball joint i still have the ones that my TT had since i got it like 5 years ago, tie rods, & sway bars were replaced prior to doing the powerflex bushings so far everything’s been holding up no clunks or anything like that car feels very planted in turns
      Check your cv axles i upgraded mine, but if youre lowered, also try checking your upper strut mount bushing its notorious for clunks

  • @joshuarose4363
    @joshuarose4363 Год назад

    Do them bushes fit on skoda octavia vrs mk3 if you no be awsome if could send link

  • @j.m.5995
    @j.m.5995 2 года назад +3

    I left my bushings out in the sun for like an hour or so and it seem to help make them more pliable prior to install

    • @xNachoPandaXx
      @xNachoPandaXx  2 года назад +1

      I used to put them in the freezer for them to “shrink” but eh 🤷🏽‍♂️

    • @adrianTNT
      @adrianTNT Год назад

      @@xNachoPandaXx dang, even more hard decisions :)) Wide and soft or shrinked but rigid. I am thinking with freezer you might have some chances to crack them when installing them.

  • @MegaHollywood1971
    @MegaHollywood1971 Год назад

    Very good BTW...
    But, you should have replaced the ball joints for good measure, now that the "vibrations" will be much greater. Would save you another trip down there in the near future 👍

    • @xNachoPandaXx
      @xNachoPandaXx  Год назад

      I wanted to get tubular subframe/control arms with hiem joints on my car 😂 thats the main reason

  • @Al-qv5vs
    @Al-qv5vs 3 года назад +1

    Thanks for the interesting video. What is the ride like when driving 'normally'? Is it a hard ride?

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад +1

      Its very noisy and stiff cause of the engine mounts i have installed on the TT but aside from that its comfortable when just cruising

    • @Al-qv5vs
      @Al-qv5vs 3 года назад +1

      Ok thanks. Can't make my mind up...normal or updated.

    • @adrianTNT
      @adrianTNT Год назад

      ​@@Al-qv5vs did you tried PowerFlex / polyurethane bushings ? I am also trying to decide, but I think since my car/bushings have almost 300 000 km, normal ones should feel like a good "upgrade" for many km.

  • @j.m.5995
    @j.m.5995 2 года назад +2

    That's a nice Volkswagen

  • @beargrillz613
    @beargrillz613 2 года назад

    is something diffrent with the powerflex Bushings?

    • @xNachoPandaXx
      @xNachoPandaXx  2 года назад

      Handling is alot stiffer which in turn gives you great feedback and coincidence during turns 👍🏼

  • @jlw7kid
    @jlw7kid 2 года назад

    Do you think those arms would fit on a mk4 jetta

    • @xNachoPandaXx
      @xNachoPandaXx  2 года назад

      I believe the mk4 community does this swap but you may need a different knuckle. Just make sure to do some research

  • @HorrorFun23
    @HorrorFun23 3 года назад

    What kind of lubrication is it ?

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад +2

      Powerflex supplies it with the bushings. I believe it silicone based

  • @shaunvowles6147
    @shaunvowles6147 3 года назад

    Worth it mate?

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад +2

      It was definitely worth it for me since im keeping the car for a while plus anything happens to the bushings you get lifetime warranty 👍🏼

  • @Jaxson8157
    @Jaxson8157 3 года назад +1

    How difficult was it to do the strut bushings?

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад

      ruclips.net/video/-7HJO_LPNuk/видео.html wasnt too bad i got coilovers tho so i didnt have to use a big spring compresor tool

  • @natanaelsantos2027
    @natanaelsantos2027 3 года назад +3

    Did you noticed a difference?

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад +2

      It does feel stiffer, but i need an alignment before i go crazy 😜 tires are too meaty so im rubbing atm ever since i lowered the car when i installed the upper poly strut mount bushings. I’ll make sure to post an update video💪🏼

    • @natanaelsantos2027
      @natanaelsantos2027 3 года назад +2

      @@xNachoPandaXx okay thanks for those videos 👍🏼

    • @xNachoPandaXx
      @xNachoPandaXx  3 года назад +7

      So little update man, i drove the car today and i felt a day and night difference the handling is crazy! I have full powerflex setup now aside from the coilovers and it rips even with no alignment 😬
      And thanks for the support man 🤘🏼

    • @natanaelsantos2027
      @natanaelsantos2027 3 года назад

      @@xNachoPandaXx okay thanks for the feedback. I was thinking about doing this upgrade but wasn't sure if it will make a difference. But I think I will do it now😉. Thanks