Daniel thanks for posting this video, it helped me get my quad back up and flying, I upgraded to betaflight 4.2 and it wiped out my settings, I had almost eveything memorized except the controller. This video did the trick, you earned a subscriber.
GREAT VIDEO BUT I NEED YOUR HELP! i have a Holybro Kakute F7 HDV & Tekko32 F3 HDV 40A 4in1 ESC 30x30 Stack and i manage to connect the receiver the first time, but after some time something happened and now i cant connect the Receiver(DJI CONTROLLER) to Betaflight :( the goggle and the unit and controller are all connected please help
What i am stil missing is a video about filters with the dji system. As we do not need filters for analog feed,but only a good flying quad as dji system gives best quality image possible.
Hey Daniel, I am very concerned with myself because I can't get this issue solved with arming motors! I saw you video and your motors worked switching SA!! , why not mine??? Lol Thank you for your assistance Daniel.
Nice video. I have a Flywoo Explorer HD V2 that has crossfire. I see you mentioned that the quad in this video had crossfire prior. What did you do to have to use your DJI Remote?
@@dkieng So I opened it up and it is already soldered. Great news! I just had to make a change in BetaFlight per the manual. I missed a fine print key point in the manual. Thanks for the help!
i have a dji set up and and all links up with beta flight but when i move the sticks around the right stick side to side controls throttle and up and down controls roll and the left stick controls the yaw and pitch. how do i get the channels to switch so throttle is on the left stick with yaw and all in correct positions . i tried to change the sequence in the AETR1234 SECTION AND NO LUCk please help
Did you have to set up your led a certain way? I have the RGB RaceLiteWire LED connected directly to motor but they don't turn on, but the motors work perfectly fine.
Hey Daniel, I have a new caddx vista and soldered up correctly to cae with plug connected to my flywoo gn745. I see the controller in the goggles but not getting any battery voltage. Also in betaflight the receiver is setup correctly with the correct sbus settings and baud rated but stick movement is not working....what am I missing?
im frustrated, im on day 3 of punching this thing... so please help me daniel! bought a betafpv 95x v3 PNP because im new to this, thought i could just plug it in and get it in the air. but i have a problem with getting my dji controller to work in betaflight.. it is linked to the caddx vista air unit. i dont know which serial rx or uart im supposed to turn on, because i did now solder myself. i flashed the newest version on the fc, maybe i need an older version. idk, i feel like ive tried everything
I got it from Amazon. www.amazon.com/Soldering-Insulation-Position-Computer-DCM-01A/dp/B09FK16B12/ref=sr_1_10?crid=2D1P2AZNQEUZM&keywords=anti+static+mat&qid=1647434751&sprefix=anti+st%2Caps%2C81&sr=8-10
Hello Daniel, i would absolutely some help from you... Ive bought a TITAN DC5 Plug and Play with a Succedx F7 and i have bind the dji controller, but on Betaflight there isnt no response from the radio.... nothing... when i write "status" into CLI it's written RX LOSS CLI MSP and i don't know because i've put the good firmware, the good CLI and eveything ... it's a 6 pins cable plug and play so normally it should work... of course ive put SBUS and anything ... If you have any idea thanks a lot mate :)
Ok, make sure in Betaflight under Ports tab, you select the correct UART for Serial RX and MSP. What firmware did you use to update the Flight controller?
Hi! Thank you so much for this content. I would like to add a pitch control to my camera, do you know if any of the rollers of the radio is linked as a channel, just like the switches?
I have green light on controller aswekk but there is no conection on betaflight cannot change anything rates or modes dont see any movements of my sticks in betaflight.... 🤢🤢🤢 Don't know why don't know where to look
Daniel, yes I got video on my goggles, SBUS is the same than yours. I could not set the other switches, Is it matter to get the motor running? The only I want now is that! lol
Hi Daniel, yes everything is linked but I realized that there are a bunch of settings on the manual to be done through the goggles, configurating the remote controller over there. So, I totally missed this point, never saw it before, do you what I am talking about right? Question. manual says that in Function Mode you can assign switches to functions. I know that Arm will be SA, but Flip which switch will be? Angle ? Can you help me with this?
Great that you got everything linked together. For your switch settings, you need to configure in Betaflight first. Also you need to select SBUS in Betaflight for your controller link. I think you are missing a few steps in set up procedures.
Thanks for the video, UNFORTUNATELY, I can't even get the radio to connect to BetaFlight. I click "Connect" it says connecting...then it stops and says connect again. On the left side it says: "Serial port succesfully opened with ID : 1 (and then the number goes up for each attempt) then it says: Serial port successfully closed". Thoughts? Input? Magic words to make her work?
Ok, you lost me a bit here. You don't connect your DJI radio to Betaflight. You need to connect your quad to Betaflight. It sounds like your USB driver is not installed correctly on your computer. Are you using a Mac or a Windows PC? If you are using a windows PC make sure you install the latest Zadig windows USB driver on the main page of the Betaflight.
@@dkieng HA! Thanks, Daniel. I didn't read or stumble across the fact you need to do the changes to the radio through the quad. Makes sense. Hey, Daniel...thanks.
I need help with mine. The controller and the air unit are bound together but when I connect the drone to betaflight and move the joystick on the controller, I wouldn't communicate with the drone at all
I have a question, and I think I might have waste a bunch of money on this, my elevator is inverted, so when my right hand push up, my quad tilts back, and push down on my radio, my quad goes forward, how can I change that, I can just change the weight on my Taranis in the mixer page, how do I do it for this?????
Hello, I just purchased the kakute F7 HDV, for use with my DJi digital fpv system. I am having trouble connecting the transmitter to the fpv air unit on the drone. The user manual does not seem to include the “hdv” specifics. I have tried every uArt port and have selected serial RX, but the board still will not recognize the DJi unit. I have the DJi unit connected using easy plug in the f7 board. I also have sBus selected. I am on Betaflight 4.04. Can you help? Thanks so much!
In case someone else or you still need this. Kalute F7 HDV with DJI controller -In ports select Uart 1 "on" under msp / Uart6 "on" under serial rx Make sure SBUS is selected under receiver in the configuration tab.
@@CobabeCreative This helped alot, I will also add for anyone else still having trouble make sure you activate your dji stuff on DJI assistant 2. I didn't do that step correctly (was using an older DJI assistant 2) once I got the correct one and did firmware updates everything worked!
Hi, I got my DJI FPV goggles and controller a week ago and I was ready today to set all parts with a Flywoo vampire2 hd 210mm f7 bluetooth 6s 5 inch fpv equipped with the DJI Air unit. I linked all them and controller arm switch SA did not work as expected. I was really upset and confused about the results. No way to get the motors working and I went to Betaflight to check more and deep and I discover that NONE of the switches were assigned to any command. Is that right? or I am wrong on my findings? Goggles was good, Air unit was good but controller was empty of working switches. What do you think?, Thanks
@@dkieng I understand that this new DJI FPV system I bought from DJI store should be working out of the box without changing anything. The only setting is linking the parts which I did and the drone did not arm. I am contacting DJI for a replacement. Thank you
@@alumahomeinspections7009 ok, I might wrong on this but I’m pretty sure that is nothing wrong with your DJI FPV system. You just need to make that you bind the remote to your DJI Air unit first then connect it to Betaflight to set up your ports and map your remote controller channels in Betaflight. I have set up too many of DJI FPV systems and None of them work with Betaflight straight out of the box. You need to configure it.
@@dkieng Daniel, I can't believe this is happening with DJI, they never say nothing about Betaflight configuration !! The advertising and videos only show linking the components and voilla!!
@@alumahomeinspections7009 So, I'm assuming you already linked your remote and your goggles to your Air unit? Did you see the Green LED on your remote and the Air unit? Did you get a video on your goggles?
hey man, I have the same issue as some below. I have my air unit linked with my RC, it shows green light, but no response in my goggles or betaflight. I know my DJI RC is working because I use it for the simulator. Is there something I am missing? did all the things in this video. Is there maybe a driver I need to install so my laptop recognize my RC in betaflight? I am clueless at this moment and any tips could help me.
jeromyboy1 there are a couple items that you need to check. First, make sure you are selected the UART for your MSP channel. Second, go to CLI on Betaflight and make sure your Sbus baud fast is set to ON. Those are the major issues when you can’t get it working with your quad. I hope this helps
@@dkieng thank you for your quick response. I have set UART1 MSP off, serial RX on, UART2 MSP ON, and my UART3 is mt GPS. Is this ok? is it ok to put more things ON? The receiver part is really though for me... I have put SBUS baud fast on too. The weird thing is that my RC and air unit go solid green, I see it is linked up in my goggles, but no response in goggle or betagflight yet. I was hoping it was not so difficult but I am not giving up! and today I downloaded STM32F7 firmware. It says in the box I need it so I did just download it. But it didnt solve the problem
@@dkieng I tried to set sbus faud on and after that I think I forget to Save it. When I try this now it canceled the safe and close Betaflight saying: Failed to close serial port
@@dkieng I saw another youtuber, and when he set sbus faud = on, then he pressed save and his quad rebooted. my betaflight gives an error saying Failed to close serial port and disconnect my quad... but doesnt reboot my quad. I cannot see DJI DHL protocol in my goggle, only the normal.
@@oxfordbornbrickie9386 Make sure you are not plug in to Betaflight. It will show RED in Betaflight if you are connected and you try to try arm the quad. Once you unplug the quad from Betaflight it will arm. Good Luck!
My dji controller is connected with sbus and is showing up but the the AERT is all messed no matter how I change it. Also the motors are not spinning when armed. :(
If you build this quad yourself, make sure you connect the RX and TX from the Air unit correctly on your FC. RX wire from the Air unite goes to the TX pad on the flight controller and RX from the Air unite goes to the TX on the FC. The ground wire from the Air Unit goes to the ground pad on the FC as well. Also make sure that the DJI HDL wire (yellow) from the air unit connect to the Sbus pad on the FC. Check the wiring diagram here. vdr.one/how-to-build-a-custom-6s-race-drone-with-dji-digital-hd-fpv/
@@dkieng thanks for the response daniel. I did it like mentioned. I think I need to configure something in betaflight to get the motors spinning. I got the arm button maped on the dji controller and can use it but can't get the motors to spin. Maybe because of some safety feature I'm not aware of?
@@PWN3DU01 Yes, there is a safety feature in Betaflight that you can't spin the motors. To test this just unplug the quad from your computer and arm it and see if your motors are spinning.
@@dkieng Yes, today I made them spin and mapped them so they have the correct direction. Now the only thing I can't do is use my controllers to turn the motors. The Air Unit and the controller are linked using SBUS and the input is also correct in the receiver tab inside betaflight. I mapped the AUX1 button for arm just like you did but stll can't use the sticks to spin the motors.
@ 4:15, you had your FC board connected to the computer, and then you turned on the DJI RC and plugged the drone battery to the FC? Or did you not plug in the lipo battery onto the FC? I follow along well until when I turn on my receiver, and my FC board is connected to computer, but no battery is plugged in, there seems to be no input detected from my RC. This is weird because I can still slide the motor sliders and the motors will spin, which mean motor is not problem. I have already activated and linked the RC, the Air Unit, and the FC. But when I turn on my receiver with the quad connected to computer, I do not see RC input.
Yes, you need to power your DJI Air unit on the quad. So you need to connect the Lipo to the quad and also connect to BF at the same time. Make sure to remove your props before doing this. Good Luck!
@@dkieng Okay. I still cannot seem to get any input from the RC. Do you need to have goggles connected? I dont know why I do not get any input from RC seen in betaflight... everything else works fine. I suspect Air Unit and FC has problem communicating... What kind of wiring do you have? Do you have photo?
@@dkieng spashipa! Thank you for your fast reply!! your knowledge is invaluable. I brought my quad to the hobby shop and this problem has us beat. I have the Air Unit, the goggles, and the DJI RC all activated and linked up. I am using the hobbyking f4 and 4in1 ESC boards, which run OmnibusF4SD. The quad connects to betaflight fine, calibrates fine, motors sliders work fine (when I manually pull the motor sliders they spin up). On the FC board, I have the white and grey (OSD Info) wire soldered from the Air Unit to the RX1 and TX1 spots on FC, then I have the yellow DJI signal wire soldered from Air Unit to hole labeled SBUS. While the red and black are just wired to power and gnd. In betaflight, I set UART 1 to have MSP enabled, and for UART3 (assuming UART3, if you look at the FC board RX3 is labeled above SBUS so I assume the colum is UART3) I set that to have serial RX enabled. However, when i plug in the battery to the quad, and turn on the remote, with the goggles off, the quad does not get ANY RC input when i try to throttle up or anything. Ive checked voltages of the FC and ESC... etc, it seems to be a port configuration problem or something with my wiring... or idk. I cannot figure it out and its despairing. FYI the status of the quad says "Arm Disabled" and the FC has a solid green light with a blinking red light.
Daniel Kieng problem is that the uarts aren’t labeled on this board Tried to look it up online.. still isn’t clear Can you explain what you mean by channel mapping in this case
hey sir, i got it all working, but i cannot get the drone to arm, i am using the dji tx i configured all the modes etc, working nice on betaflight, but when i go try to fly it , nothing works, beeper nothing and arm nothing . any ideas thank you
Im having some trouble i order dji system but it came with an tbs crossfire nano rx. I unplugged the crossfire but nano but my dji controller doesnt show any movement or interaction to the drone when i go to the reciever tab in beta flight. Please help
@@dkieng im using caddx vista, i updated the googles, air unit, and controller on the dji assistant 2 on the dji website. The goggles show picture from the quad. The controller power light is green when quad is pulled in as well. But drone wont arm and controller won't response in beta flight. Im 20 hours into trying to resolve this and can't get my nazgul5 hd to arm. I think it may be the port tab in beta flight but idk which ports should be on/off since it came with a tbs crossfire nano rx and im using the dji controller. I hope this text explained it better im so stressed with this.
So do you have it soldered on or not? Because I have the exact same problem with my quad but I can plug the cables in a port but still doesn’t show inputs
@@torguapo so I contacted DJI because I have the air unit from them, and gave me a beta software for it, but already solved it. Okay bit of a weird story: I crashed it multiple times and at the end of that day I crashed so hard it stopped working. Had to buy a second fully tuned quad to troubleshoot between the 2. And before that software update I flashed the quad and found standard cli document for my board. This worked for me. But I suggest contacting DJI anyway saying don’t want it in for repair but ask about the beta program. You’ll have to send error logs of your unit to them for analysis. Trying to figure out a definite guide for this exact problem and will update later!
This saved me after 3 hours of frustration. Thank you!
Daniel thanks for posting this video, it helped me get my quad back up and flying, I upgraded to betaflight 4.2 and it wiped out my settings, I had almost eveything memorized except the controller. This video did the trick, you earned a subscriber.
You sir are amazing. Thank you for helping me out!!!
Very informative and extremely helpful. Thank-you
GREAT VIDEO BUT I NEED YOUR HELP! i have a Holybro Kakute F7 HDV & Tekko32 F3 HDV 40A 4in1 ESC 30x30 Stack and i manage to connect the receiver the first time, but after some time something happened and now i cant connect the Receiver(DJI CONTROLLER) to Betaflight
:(
the goggle and the unit and controller are all connected
please help
I have the same issue, did you manage to fix it? please help...
Thanks mang got my OSD working by enabling UART3
very informative! could be possible to connect the RC-N1 controller to Betaflight?
thank you very much for this useful sharing, i'm learning DJI FPV. have a great week, may all the best for you 👍👍🙏❤️🥃
What i am stil missing is a video about filters with the dji system. As we do not need filters for analog feed,but only a good flying quad as dji system gives best quality image possible.
Thanks for the great explanation
Hey Daniel, I am very concerned with myself because I can't get this issue solved with arming motors! I saw you video and your motors worked switching SA!! , why not mine??? Lol Thank you for your assistance Daniel.
I only have the USB VCP identifier, not the rest...UART1, 3. 6
Thanks man, OSD tip make my day!
Remember to put the antennas on! My controller wouldnt connect 6 inches away from the air unit without the antenna!
Lol, my firmware was from 2021, I updated the firmware to 11/22 version and it works now.
Thank you Daniel🙏🏼
Nice video. I have a Flywoo Explorer HD V2 that has crossfire. I see you mentioned that the quad in this video had crossfire prior. What did you do to have to use your DJI Remote?
To use the DJI remote all you have to do is to solder the Sbus wire from the Air unit to your Flight controller Sbus pad.
@@dkieng So I opened it up and it is already soldered. Great news! I just had to make a change in BetaFlight per the manual. I missed a fine print key point in the manual. Thanks for the help!
i have a dji set up and and all links up with beta flight but when i move the sticks around the right stick side to side controls throttle and up and down controls roll and the left stick controls the yaw and pitch. how do i get the channels to switch so throttle is on the left stick with yaw and all in correct positions . i tried to change the sequence in the AETR1234 SECTION AND NO LUCk please help
To switch your DJI remote from Mode 1 to mode 2 you need to do that the DJI configurator. Not with Betaflight.
Did you have to set up your led a certain way? I have the RGB RaceLiteWire LED connected directly to motor but they don't turn on, but the motors work perfectly fine.
Hey Daniel, I have a new caddx vista and soldered up correctly to cae with plug connected to my flywoo gn745. I see the controller in the goggles but not getting any battery voltage. Also in betaflight the receiver is setup correctly with the correct sbus settings and baud rated but stick movement is not working....what am I missing?
Lol, my firmware was from 2021, I updated the firmware to 11/22 version and it works now.
@@tombusby2333 I'm glad it's working for you. fly safe
Hi, I have cinelog 35 HD! Drone won't arm. Can you please advise how to set up throttle minimum to 1000 in DJI FPV Controller?
Thank you so much ..
Good Job!-Thanks!
Thank you so much!
im frustrated, im on day 3 of punching this thing... so please help me daniel!
bought a betafpv 95x v3 PNP because im new to this, thought i could just plug it in and get it in the air.
but i have a problem with getting my dji controller to work in betaflight.. it is linked to the caddx vista air unit.
i dont know which serial rx or uart im supposed to turn on, because i did now solder myself.
i flashed the newest version on the fc, maybe i need an older version. idk, i feel like ive tried everything
cool blue work pad, where you get it from??
I got it from Amazon. www.amazon.com/Soldering-Insulation-Position-Computer-DCM-01A/dp/B09FK16B12/ref=sr_1_10?crid=2D1P2AZNQEUZM&keywords=anti+static+mat&qid=1647434751&sprefix=anti+st%2Caps%2C81&sr=8-10
Hello! Is it possible to also have the left top shoulder wheel control the yaw axis?
I need that.
Thanks
My remote control doesnt move anything in the beta flight, but its connected to the air unit. Do you know what could be the reason ? Please help
Alex Gevorg make sure you select the correct port for your MSP and Sbus in Betaflight.
@@dkieng I have the same problem and I've checked and try almost every thing.....but still my channels show no movement
Hello Daniel, i would absolutely some help from you... Ive bought a TITAN DC5 Plug and Play with a Succedx F7 and i have bind the dji controller, but on Betaflight there isnt no response from the radio.... nothing... when i write "status" into CLI it's written RX LOSS CLI MSP and i don't know because i've put the good firmware, the good CLI and eveything ... it's a 6 pins cable plug and play so normally it should work... of course ive put SBUS and anything ... If you have any idea thanks a lot mate :)
Ok, make sure in Betaflight under Ports tab, you select the correct UART for Serial RX and MSP. What firmware did you use to update the Flight controller?
What BetaFlight firmware did you use 4.1.4?
iFlight Titan DC5 uses a different Betaflight firmware. Please check the iFlight support site for correct target update.
Hi! Thank you so much for this content.
I would like to add a pitch control to my camera, do you know if any of the rollers of the radio is linked as a channel, just like the switches?
If your camera is attached to a servo then it will work fine.
@@dkieng Sure! But are any of the rollers available as a channel?
Yes, you can assign any switches or pods to any channel you like in OpenTX.
@@dkieng I mean with the DJI TX, is it possible? As there is not much room for programming it...
I have green light on controller aswekk but there is no conection on betaflight cannot change anything rates or modes dont see any movements of my sticks in betaflight.... 🤢🤢🤢 Don't know why don't know where to look
Make sure have your remote controller channel mapping correctly set. For example, AETR123 or whatever your remote controller uses.
@@dkieng I have the same controller like yours on vid
@@Cinoo90 can you confirm what UART did connect you air unit to for SBUS?
@@dkieng remote control responding on simulator... So don't know remote controll is fucked or settings...
You broke my brain talking about the obvious, but never showed how to configure the rocker switches on either side
Daniel, yes I got video on my goggles, SBUS is the same than yours. I could not set the other switches, Is it matter to get the motor running? The only I want now is that! lol
Hi Daniel, yes everything is linked but I realized that there are a bunch of settings on the manual to be done through the goggles, configurating the remote controller over there. So, I totally missed this point, never saw it before, do you what I am talking about right? Question. manual says that in Function Mode you can assign switches to functions. I know that Arm will be SA, but Flip which switch will be? Angle ? Can you help me with this?
Great that you got everything linked together. For your switch settings, you need to configure in Betaflight first. Also you need to select SBUS in Betaflight for your controller link. I think you are missing a few steps in set up procedures.
Thanks for the video, UNFORTUNATELY, I can't even get the radio to connect to BetaFlight. I click "Connect" it says connecting...then it stops and says connect again. On the left side it says: "Serial port succesfully opened with ID : 1 (and then the number goes up for each attempt) then it says: Serial port successfully closed".
Thoughts? Input? Magic words to make her work?
Ok, you lost me a bit here. You don't connect your DJI radio to Betaflight. You need to connect your quad to Betaflight. It sounds like your USB driver is not installed correctly on your computer. Are you using a Mac or a Windows PC? If you are using a windows PC make sure you install the latest Zadig windows USB driver on the main page of the Betaflight.
@@dkieng HA! Thanks, Daniel. I didn't read or stumble across the fact you need to do the changes to the radio through the quad. Makes sense.
Hey, Daniel...thanks.
I need help with mine. The controller and the air unit are bound together but when I connect the drone to betaflight and move the joystick on the controller, I wouldn't communicate with the drone at all
What are you flying? What FC and receiver? What radio do you have?
@@davidcraig5378 I have a geprc rocket plus and the dji controller
@@fettuccine4255 I am sorry I know nothing about DJI controllers.
I have a question, and I think I might have waste a bunch of money on this, my elevator is inverted, so when my right hand push up, my quad tilts back, and push down on my radio, my quad goes forward, how can I change that, I can just change the weight on my Taranis in the mixer page, how do I do it for this?????
Please watch this video on how to change your settings on your Taranis. ruclips.net/video/Z6ZfTTmDTrc/видео.html
Hello, I just purchased the kakute F7 HDV, for use with my DJi digital fpv system. I am having trouble connecting the transmitter to the fpv air unit on the drone. The user manual does not seem to include the “hdv” specifics. I have tried every uArt port and have selected serial RX, but the board still will not recognize the DJi unit. I have the DJi unit connected using easy plug in the f7 board. I also have sBus selected. I am on Betaflight 4.04. Can you help? Thanks so much!
In case someone else or you still need this. Kalute F7 HDV with DJI controller -In ports select Uart 1 "on" under msp / Uart6 "on" under serial rx Make sure SBUS is selected under receiver in the configuration tab.
@@CobabeCreative This helped alot, I will also add for anyone else still having trouble make sure you activate your dji stuff on DJI assistant 2. I didn't do that step correctly (was using an older DJI assistant 2) once I got the correct one and did firmware updates everything worked!
How can I use this controller on my dji naza v2 like dose it need a receiver
This controllerd
Does work naza.
Hi, I got my DJI FPV goggles and controller a week ago and I was ready today to set all parts with a Flywoo vampire2 hd 210mm f7 bluetooth 6s 5 inch fpv equipped with the DJI Air unit. I linked all them and controller arm switch SA did not work as expected. I was really upset and confused about the results. No way to get the motors working and I went to Betaflight to check more and deep and I discover that NONE of the switches were assigned to any command. Is that right? or I am wrong on my findings? Goggles was good, Air unit was good but controller was empty of working switches. What do you think?, Thanks
First, you need to make sure that you have the right port enable for the your DJI Air unit jus like I show you on the video.
@@dkieng I understand that this new DJI FPV system I bought from DJI store should be working out of the box without changing anything. The only setting is linking the parts which I did and the drone did not arm. I am contacting DJI for a replacement. Thank you
@@alumahomeinspections7009 ok, I might wrong on this but I’m pretty sure that is nothing wrong with your DJI FPV system. You just need to make that you bind the remote to your DJI Air unit first then connect it to Betaflight to set up your ports and map your remote controller channels in Betaflight. I have set up too many of DJI FPV systems and None of them work with Betaflight straight out of the box. You need to configure it.
@@dkieng Daniel, I can't believe this is happening with DJI, they never say nothing about Betaflight configuration !! The advertising and videos only show linking the components and voilla!!
@@alumahomeinspections7009 So, I'm assuming you already linked your remote and your goggles to your Air unit? Did you see the Green LED on your remote and the Air unit? Did you get a video on your goggles?
My controller is not connecting do you know why? It’s not showing it’s connected( in beta flight )
I have the same issue, but can’t see it in betaflight, can you help me?
hey man, I have the same issue as some below. I have my air unit linked with my RC, it shows green light, but no response in my goggles or betaflight. I know my DJI RC is working because I use it for the simulator. Is there something I am missing? did all the things in this video. Is there maybe a driver I need to install so my laptop recognize my RC in betaflight? I am clueless at this moment and any tips could help me.
jeromyboy1 there are a couple items that you need to check. First, make sure you are selected the UART for your MSP channel. Second, go to CLI on Betaflight and make sure your Sbus baud fast is set to ON. Those are the major issues when you can’t get it working with your quad. I hope this helps
@@dkieng thank you for your quick response. I have set UART1 MSP off, serial RX on, UART2 MSP ON, and my UART3 is mt GPS. Is this ok? is it ok to put more things ON? The receiver part is really though for me... I have put SBUS baud fast on too. The weird thing is that my RC and air unit go solid green, I see it is linked up in my goggles, but no response in goggle or betagflight yet. I was hoping it was not so difficult but I am not giving up! and today I downloaded STM32F7 firmware. It says in the box I need it so I did just download it. But it didnt solve the problem
@@dkieng I tried to set sbus faud on and after that I think I forget to Save it. When I try this now it canceled the safe and close Betaflight saying: Failed to close serial port
jeromyboy1 just try to reset it again by disconnecting the close Betaflight.
@@dkieng I saw another youtuber, and when he set sbus faud = on, then he pressed save and his quad rebooted. my betaflight gives an error saying Failed to close serial port and disconnect my quad... but doesnt reboot my quad. I cannot see DJI DHL protocol in my goggle, only the normal.
I can’t get my beta fpv95x v2 to arm with the dji controller can you help
Just keeps going red and never yellow
Cinewhoop 360 make sure you enable the correct UART for your MSP channel.
Cinewhoop 360 also you serial UART
@@oxfordbornbrickie9386 Make sure you are not plug in to Betaflight. It will show RED in Betaflight if you are connected and you try to try arm the quad. Once you unplug the quad from Betaflight it will arm. Good Luck!
My dji controller is connected with sbus and is showing up but the the AERT is all messed no matter how I change it. Also the motors are not spinning when armed. :(
Did you build this quad yourself or you purchased a RTF quad?
If you build this quad yourself, make sure you connect the RX and TX from the Air unit correctly on your FC. RX wire from the Air unite goes to the TX pad on the flight controller and RX from the Air unite goes to the TX on the FC. The ground wire from the Air Unit goes to the ground pad on the FC as well. Also make sure that the DJI HDL wire (yellow) from the air unit connect to the Sbus pad on the FC. Check the wiring diagram here. vdr.one/how-to-build-a-custom-6s-race-drone-with-dji-digital-hd-fpv/
@@dkieng thanks for the response daniel. I did it like mentioned. I think I need to configure something in betaflight to get the motors spinning. I got the arm button maped on the dji controller and can use it but can't get the motors to spin. Maybe because of some safety feature I'm not aware of?
@@PWN3DU01 Yes, there is a safety feature in Betaflight that you can't spin the motors. To test this just unplug the quad from your computer and arm it and see if your motors are spinning.
@@dkieng Yes, today I made them spin and mapped them so they have the correct direction. Now the only thing I can't do is use my controllers to turn the motors. The Air Unit and the controller are linked using SBUS and the input is also correct in the receiver tab inside betaflight. I mapped the AUX1 button for arm just like you did but stll can't use the sticks to spin the motors.
@ 4:15, you had your FC board connected to the computer, and then you turned on the DJI RC and plugged the drone battery to the FC? Or did you not plug in the lipo battery onto the FC? I follow along well until when I turn on my receiver, and my FC board is connected to computer, but no battery is plugged in, there seems to be no input detected from my RC. This is weird because I can still slide the motor sliders and the motors will spin, which mean motor is not problem. I have already activated and linked the RC, the Air Unit, and the FC. But when I turn on my receiver with the quad connected to computer, I do not see RC input.
Yes, you need to power your DJI Air unit on the quad. So you need to connect the Lipo to the quad and also connect to BF at the same time. Make sure to remove your props before doing this. Good Luck!
Please join my facebook group if you want more into. DJI FPV System - Users and Support Group
@@dkieng Okay. I still cannot seem to get any input from the RC. Do you need to have goggles connected? I dont know why I do not get any input from RC seen in betaflight... everything else works fine. I suspect Air Unit and FC has problem communicating... What kind of wiring do you have? Do you have photo?
@@dkieng spashipa! Thank you for your fast reply!! your knowledge is invaluable. I brought my quad to the hobby shop and this problem has us beat. I have the Air Unit, the goggles, and the DJI RC all activated and linked up. I am using the hobbyking f4 and 4in1 ESC boards, which run OmnibusF4SD. The quad connects to betaflight fine, calibrates fine, motors sliders work fine (when I manually pull the motor sliders they spin up). On the FC board, I have the white and grey (OSD Info) wire soldered from the Air Unit to the RX1 and TX1 spots on FC, then I have the yellow DJI signal wire soldered from Air Unit to hole labeled SBUS. While the red and black are just wired to power and gnd. In betaflight, I set UART 1 to have MSP enabled, and for UART3 (assuming UART3, if you look at the FC board RX3 is labeled above SBUS so I assume the colum is UART3) I set that to have serial RX enabled. However, when i plug in the battery to the quad, and turn on the remote, with the goggles off, the quad does not get ANY RC input when i try to throttle up or anything. Ive checked voltages of the FC and ESC... etc, it seems to be a port configuration problem or something with my wiring... or idk. I cannot figure it out and its despairing. FYI the status of the quad says "Arm Disabled" and the FC has a solid green light with a blinking red light.
@@aruhtaz Did you do the firmware upgrade through DJI Assistant 2 app? If you have not that is the first step to get to work correctly.
Not sure why I can’t get the radio to register in betaflight
I’m trying to hook it to the flight controller in my hawk pro
Raydio Show make sure to select the right UART for your serial port in Betaflight. Also check your channel mapping.
Daniel Kieng problem is that the uarts aren’t labeled on this board
Tried to look it up online.. still isn’t clear
Can you explain what you mean by channel mapping in this case
In Betaflight, go to the Receiver tab and select the correct channel mapping.
Something like TAER1234
Daniel Kieng I have it set on that
is this working for you in the new betaflight 4.2
billy knippers idk, I have not tried this yet on BF 4.2.
hey sir, i got it all working, but i cannot get the drone to arm, i am using the dji tx i configured all the modes etc, working nice on betaflight, but when i go try to fly it , nothing works, beeper nothing and arm nothing . any ideas thank you
Rafael Bonventi Check you channel mapping in Betaflight. Make sure when you flip the arm switch your aux1 bar is moving to the yellow bar.
Im having some trouble i order dji system but it came with an tbs crossfire nano rx. I unplugged the crossfire but nano but my dji controller doesnt show any movement or interaction to the drone when i go to the reciever tab in beta flight. Please help
First thing firs, Are you using DJI Air unit for Caddx Vista?
@@dkieng im using caddx vista, i updated the googles, air unit, and controller on the dji assistant 2 on the dji website. The goggles show picture from the quad. The controller power light is green when quad is pulled in as well. But drone wont arm and controller won't response in beta flight. Im 20 hours into trying to resolve this and can't get my nazgul5 hd to arm. I think it may be the port tab in beta flight but idk which ports should be on/off since it came with a tbs crossfire nano rx and im using the dji controller. I hope this text explained it better im so stressed with this.
So do you have it soldered on or not? Because I have the exact same problem with my quad but I can plug the cables in a port but still doesn’t show inputs
Did you find a solution for this? Im having the same problem.
@@torguapo so I contacted DJI because I have the air unit from them, and gave me a beta software for it, but already solved it. Okay bit of a weird story: I crashed it multiple times and at the end of that day I crashed so hard it stopped working. Had to buy a second fully tuned quad to troubleshoot between the 2. And before that software update I flashed the quad and found standard cli document for my board. This worked for me. But I suggest contacting DJI anyway saying don’t want it in for repair but ask about the beta program. You’ll have to send error logs of your unit to them for analysis. Trying to figure out a definite guide for this exact problem and will update later!