No caffeine for you. lol I have to slow the video to 75% to catch everything. But enjoying it so far. I don't have the XIAO version yet. But have kind of an offshoot version. But may switch at some point. Always good to see what everyone is working on and each board's quirks. Thank
Hi. If I want just the camera to stream a live image from an RC plane, then can I use this code to connect directly to my phone's wifi without going though the router?
is it work with ps3 controller bluetooth? cuz im had failed to compile when using esp32 s3, but work perfectly when using standard esp32 dev kit 1 module
If there is anyone that can help me with a question, I would be very grateful. I'm trying the "save recorded sound to microSD card" section (~ 14:30). I copy the code over, make sure the tool settings are correct, I go to upload it but then it errors with "fatal error: I2S.h: no such file or directory". I'm not sure what to do and I'm seeing confusing messages about esp versioning issues. Anyone understands what is going on with that?
What would be handy is an enclosure for the setup with the battery. So you don't have to handle the board all the time. Then you could place it around and test things out. I love the idea of a tiny tank. I might use it on a larger tank, but use a different ESP32-S3 for the movement part to drive a larger tank. Use the XIAO board for the audio/video piece.
My Xiao when connected to my laptop it connect to my wifi after I remove it and power it through usb C it doesn't connect to my wifi. Why is this happening?
Can anyone help me with the solution regarding fast forward recoding in sdcard. i am trying to use record video.ino file in which when we play the video the video plays in fastforward way.
Great tutorial. I just got this board and I was wondering, is there a way to record a video with the audio? To have the sound and video on the same file
Maybe record video and audio separately but at the same time. Then use some software to merge video and audio together. I only have ESP32 Cam. Please let me know if it works. I will buy Xiao Cam too if it works.
Yes, i really wait for you to make tiny robot like this ending video clip. I hope next Sunday I saw this robot and I also make this robot by giving your guidance.
I wonder if someone will respond. Up until the camera server code upload. Things were working fine. Then since, I'm getting A fatal error occurred: No serial data received. Failed uploading: uploading error: exit status 2" error
Great tutorial! Any idea how to cable connect two of the cam units with a third non-cam board for stereovision processing? Also, what is max fps of the cam boards?
Please Sir is there a way to use the esp rainmaker under local network. With due respect please help us to be able to achieve local control of esp rainmaker through its application. Thanks indeed
Downside of this board i see is it has a big antenna which is not possible to hide and it gets heated a lot ,so like adding heatsink wil increase its over all size so does that make sense ,and if battery is placed behind the board ,which everyone will probably do ,it will tch fire due to high temperature
From what i was reading the camera also gets hot, so if you get a longer ribbon cable you cam make a sink for that too i bet if you get the little heat sinks for the Raspberry pi 4 that could be more that capable of heat distrobution
Placement is not dependent of degree, it's totally dependent on your skills. So go for IIOT, it's a good field but make sure you develop your skills daily
I get Arduino: 1.8.19 (Mac OS X), Board: "XIAO_ESP32S3, Disabled, Disabled, QIO 80MHz, 8MB (64Mb), Core 1, Core 1, Hardware CDC and JTAG, Enabled, Disabled, Disabled, UART0 / Hardware CDC, Default with spiffs (3MB APP/1.5MB SPIFFS), 240MHz (WiFi), 921600, None, Disabled" xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun exit status 1 Fehler beim Kompilieren für das Board XIAO_ESP32S3. Dieser Bericht wäre detaillierter, wenn die Option "Ausführliche Ausgabe während der Kompilierung" in Datei -> Voreinstellungen aktiviert wäre. What is wrong?
No caffeine for you. lol I have to slow the video to 75% to catch everything. But enjoying it so far. I don't have the XIAO version yet. But have kind of an offshoot version. But may switch at some point. Always good to see what everyone is working on and each board's quirks. Thank
Xiao boards are the best I ever used, and that Sense board is just WoW!
Hi. If I want just the camera to stream a live image from an RC plane, then can I use this code to connect directly to my phone's wifi without going though the router?
is it work with ps3 controller bluetooth? cuz im had failed to compile when using esp32 s3, but work perfectly when using standard esp32 dev kit 1 module
If there is anyone that can help me with a question, I would be very grateful. I'm trying the "save recorded sound to microSD card" section (~ 14:30). I copy the code over, make sure the tool settings are correct, I go to upload it but then it errors with "fatal error: I2S.h: no such file or directory". I'm not sure what to do and I'm seeing confusing messages about esp versioning issues. Anyone understands what is going on with that?
Did you import I2S.h? Sorry if this is silly, I am a noob too but I saw this in some video
What would be handy is an enclosure for the setup with the battery. So you don't have to handle the board all the time. Then you could place it around and test things out. I love the idea of a tiny tank. I might use it on a larger tank, but use a different ESP32-S3 for the movement part to drive a larger tank. Use the XIAO board for the audio/video piece.
make some real life usable projects
care to give the link for the shown video at the end(tiny robot)?
How do i stop the blinking
My Xiao when connected to my laptop it connect to my wifi after I remove it and power it through usb C it doesn't connect to my wifi.
Why is this happening?
Can anyone help me with the solution regarding fast forward recoding in sdcard. i am trying to use record video.ino file in which when we play the video the video plays in fastforward way.
Could this module be used to stream audio or video efficiently?
what spec battery you use ? Is there a maximum battery specification that can be used?
Best I could tell was a 380mAh battery.
I bought the ESP32 old version 3yrs ago not tech savy did all instructions exactly and still did not managed to make it work...😢😢😢
can u share link to the tank robot?
Can XIAO ESP32S3 be connected to an audio amplifier?
cant wait to see future projects on this board
Great tutorial. I just got this board and I was wondering, is there a way to record a video with the audio? To have the sound and video on the same file
Maybe record video and audio separately but at the same time. Then use some software to merge video and audio together.
I only have ESP32 Cam. Please let me know if it works. I will buy Xiao Cam too if it works.
Hello techiesms, thanks for the video. Could I know if the camera can works without being plugged? Many thanks and regards
hey i have your home automation project v1.0...which was earlier built to work with blynk..can we use the same to work with cadio?
Yes, i really wait for you to make tiny robot like this ending video clip. I hope next Sunday I saw this robot and I also make this robot by giving your guidance.
Not on next Sunday but in future
I wonder if someone will respond. Up until the camera server code upload. Things were working fine. Then since, I'm getting A fatal error occurred: No serial data received. Failed uploading: uploading error: exit status 2" error
same, hope u fixed it i didnt still
Is it possible to use all those examples with PIO in VSCode too?
where did u get the tank from!!
If i want to detect the car or people then what i can do?
Is this stream via Soft Access Point mode? if so can you share the set up :)
can you suggest any usb camera module with autofocus to detect text using raspberry pi
Not sure about this
Thanks ... now I will purchase one and make a doorbell.
Can we make dashcam for car or bike?
Great tutorial! Any idea how to cable connect two of the cam units with a third non-cam board for stereovision processing? Also, what is max fps of the cam boards?
Not sure about this
@@techiesms thanks for taking the time to reply, tho. 🙏
Please Sir is there a way to use the esp rainmaker under local network. With due respect please help us to be able to achieve local control of esp rainmaker through its application. Thanks indeed
Brother is it worth doing btech in iiot
What are the placement scope
If u know pls reply
Downside of this board i see is it has a big antenna which is not possible to hide and it gets heated a lot ,so like adding heatsink wil increase its over all size so does that make sense ,and if battery is placed behind the board ,which everyone will probably do ,it will tch fire due to high temperature
From what i was reading the camera also gets hot, so if you get a longer ribbon cable you cam make a sink for that too i bet if you get the little heat sinks for the Raspberry pi 4 that could be more that capable of heat distrobution
thanks for the tutorial as the documentation has been confusing to me 😊
Hello...Can we use this With CADIO platform ?
If then make a video on that
Hi from Iran
This video was very useful
i have a question
Can I solder 1200 mAH 3.7v battery on xiao ESP32S3 module?!
Yes
for flipper0?
Please make a video using vc 02 offline voice recognition module (avilable in robu)
try tinyml on edge impulse and create a speech recognition system
You could show how to record video with audio. Thanks
thanks bro! Terrific vid
Can we like use this board to make a keyboard
Bluetooth Keyboard you can make
any I2s Ble audio stream. Please build ahead of exisiting BRO. It will be great for us
I recorded the video with an esp32-cam in AVI, and it opens properly in every video player on Mac and Windows.
We are still waiting for a microphone to be added to project Running ChatGPT on ESP32 with Audio Output 😟
July 2023
@@techiesms Looking forward to it 😶
Please as soon as possible
Thank you. This kit is amazing
Glad you like it!
HOW TO USE ESP32S3 MODULE WITH OV5640 CAMERA
Yes we want project using these microcontroller
Sir I want to pursue btech in iiot, will it be worth it regarding placement
Placement is not dependent of degree, it's totally dependent on your skills. So go for IIOT, it's a good field but make sure you develop your skills daily
It will be very useful enginnering college projects Please publish some real life projects .
Sure, do share some suggestions if you have
Hey can you make remote controlled car, control through Bluetooth
very nice video but How to use this camera with sim card for global live feed
Actually we use those push buttons in our smartpone button keys
1500₹ ,is it worth what do you think?
Nah
Thanks indeed
I get
Arduino: 1.8.19 (Mac OS X), Board: "XIAO_ESP32S3, Disabled, Disabled, QIO 80MHz, 8MB (64Mb), Core 1, Core 1, Hardware CDC and JTAG, Enabled, Disabled, Disabled, UART0 / Hardware CDC, Default with spiffs (3MB APP/1.5MB SPIFFS), 240MHz (WiFi), 921600, None, Disabled"
xcrun: error: invalid active developer path (/Library/Developer/CommandLineTools), missing xcrun at: /Library/Developer/CommandLineTools/usr/bin/xcrun
exit status 1
Fehler beim Kompilieren für das Board XIAO_ESP32S3.
Dieser Bericht wäre detaillierter, wenn die Option
"Ausführliche Ausgabe während der Kompilierung"
in Datei -> Voreinstellungen aktiviert wäre.
What is wrong?
Here comes the Ajay Devgan! 😉😉
i Am thinking of making a tiny submarine so that i can dive into my aquarium
Seed studio boards are overpriced. It's a regular board but 5x the price for no reason.
Its bigger than your thumbnail
❤ly
1st
It's 2023, let it go lol
Thanks for watching before everyone else 😇