I love the idea of doing a full harness swap from a power wheels. Thank you for sharing this video! It's in my future to do a similar swap.. time permitting and donor availability. I purchased a Hyper Toys Jeep Gladiator 12 volt ride-on for my son. He loves it, but I'm having issues with the motors and the circuit board. I can't wait to ditch the crappy electronics and tiny gauge wires on it.
Hello. The wires that connect to the battery on our Best Choice jeep wrangler are completed gone from corrosion. I found a wiring harness replacement on amazon but I cant figure out how to install it as the red wire looks like its hard wired with screws to the back of the engine? Please help? Helen
What's the piece inside the car that controls the turning ability through the remote control. And how do you replace it? It can only be controlled manually and I can still use the controller to go backwards and forward. But that's about it. And It's not the controller. It's the part inside the car.
my kids sopbost ride stops and you have to cycle the ignition to get it back on. It only happens when he goes uphill. It never used to do this. Any ideas?
Hello, I’m sure you get a million question so I understand if you don’t get to mine. My son has the Uenjoy jeep. The sound stopped working. I’ve changed the speaker but no luck. What do you think the problem could be? I also changed the small motherboard. The one under the hood. Also is there a good way to get more speed out of the jeep. Thanks!
Any tips on how to bypass a smart drive on a Barbie dream camper I have an old harness off of a Yamaha raptor. And what all would I need to keep from frying anything and burning the gears up.
Hello, I am looking to repair a similar ride-on for my son and I need advice on a replacement control board and a picture of what is under the hood. The one we have is missing the control board and fuses. Any help will be appreciated. Thank you, Sargis
I modified my kids power wheel. I put two 12v 20AH making it a 24v and now it’s super strong and fast but when it comes to go up a slop it just shuts off, what do you think the problem is? I’m assuming the problem maybe the motherboard but I’m not sure, I’ll order a higher Load Current since the one it has is a Max 25A Load Current
Lol, that project has been a major pita! having issues with it running away under full throttle. Not sure if its a defective controller or what. Hope to get back to that one soon.
Would any one be able to share what the original controller controls? Referring to the first black controller shown. I recently did a 20V upgrade and it sounded like a capacitor popped but I feel like everything still works. Any help would be appreciated by my 3 and 1 year olds.
I didn't understand about the one wheel should spin backwards and the other spin forward. I put one of those wiring kits in a jeep. Both wheels go backwards but switch it forward left one spins forward and the other spins backwards. That's off the ground and it's still got the high/low switch and it's not been rode yet PLEASE HELP🙏.
Needs a bigger thermal fuse because the high amp draw is tripping the unit off to protect from melting the wiring. U risk burning up the wiring but that is what the issue is
Hey i change the motor on my kids car from 12000 rpm to 30000 rpm but the car keeps turing off when the kids get in it to drive when i lift it ru es fine but under load it cut off i try'ed to remove the terminal fuse and run direct but still turing off sounds like it is clicking in the control modul what can i do to fix it BTW awasome videoes 👌🙌
Motors want to spin 30k and are drawing too many amps. Those hi speed motors will just burn up in ride ons. I would install power wheels brand motors that spin 16k
Hello Good Evening, What could be the problem if the toy Only moves in reverse? If i put in forward it won't. If i put in reverse it will reverse. Only the forward is the problem
@@CustomKidzCars the switch is also good, i really dont know 😂. But in Switch it will reverse and in the remote control it will reverse, but if i put in forward it forward in Switch and Remote. What could be the problem? Board?
i picked up a jetson and it has a Steel frame under it.....but it comes with that Weely TOTAL TRASH regulator in it. SO its about to get gutted out.......DO NOT EVER BUY WEELY regulators ive had 3 now and they are all total garbage.
![Gunna - HIM ALL ALONG [Official Visualizer]](http://i.ytimg.com/vi/HiCxoDeo0hc/mqdefault.jpg)
I love the idea of doing a full harness swap from a power wheels. Thank you for sharing this video!
It's in my future to do a similar swap.. time permitting and donor availability. I purchased a Hyper Toys Jeep Gladiator 12 volt ride-on for my son. He loves it, but I'm having issues with the motors and the circuit board. I can't wait to ditch the crappy electronics and tiny gauge wires on it.
So if i cut the two wire for high speed only how does that switch receive signal and power not being tied to first switch
So what do when you have 3 motors? Like on the boomerang?
Hello. The wires that connect to the battery on our Best Choice jeep wrangler are completed gone from corrosion. I found a wiring harness replacement on amazon but I cant figure out how to install it as the red wire looks like its hard wired with screws to the back of the engine? Please help? Helen
What's the piece inside the car that controls the turning ability through the remote control. And how do you replace it? It can only be controlled manually and I can still use the controller to go backwards and forward. But that's about it.
And It's not the controller. It's the part inside the car.
my kids sopbost ride stops and you have to cycle the ignition to get it back on. It only happens when he goes uphill. It never used to do this. Any ideas?
I bought a ride on 4 wheeler for my 5yr old grandson. Little did I know, it didn’t come with any wiring or battery. Will this work for that?
Hello, I’m sure you get a million question so I understand if you don’t get to mine. My son has the Uenjoy jeep. The sound stopped working. I’ve changed the speaker but no luck. What do you think the problem could be? I also changed the small motherboard. The one under the hood.
Also is there a good way to get more speed out of the jeep. Thanks!
Any tips on how to bypass a smart drive on a Barbie dream camper I have an old harness off of a Yamaha raptor. And what all would I need to keep from frying anything and burning the gears up.
And if I use a drill battery what would I need to do to keep everything safe and keep from frying that battery
I also forgot to mention it has a flashing purple light and will not go now
Hello,
I am looking to repair a similar ride-on for my son and I need advice on a replacement control board and a picture of what is under the hood. The one we have is missing the control board and fuses. Any help will be appreciated.
Thank you,
Sargis
Most units use weelye brand. Match it up with connectors
Thank you.
My kid car on truck in turning on but isn't turning left and right everything else looks great, can you help me please
I modified my kids power wheel. I put two 12v 20AH making it a 24v and now it’s super strong and fast but when it comes to go up a slop it just shuts off, what do you think the problem is? I’m assuming the problem maybe the motherboard but I’m not sure, I’ll order a higher Load Current since the one it has is a Max 25A Load Current
Sounds like there is a self-resetting fuse that's tripping.
El Toro Loco made a cameo appearance in the background!
Lol, that project has been a major pita! having issues with it running away under full throttle. Not sure if its a defective controller or what. Hope to get back to that one soon.
Would any one be able to share what the original controller controls? Referring to the first black controller shown.
I recently did a 20V upgrade and it sounded like a capacitor popped but I feel like everything still works. Any help would be appreciated by my 3 and 1 year olds.
i need a board for a wild thang like to get a factory one if not what should i get.just to ride it round the house?
Can u direct me to yer video on how to upgrade the Controller to Hobby Grade, with 1 mile reach
Can you add the link for the High Speed/Low Speed switch as well as update the link for the PW harness (currently shows a pinion). thanks!
Thanks for the heads up. Those new OEM harnesses are hard to find. I wouldn't wait.
Hi I have a Disney horse and carriage ride I cannot get it to work. Got a new battery and new charger for it. What else can I check. (HELP)....
Control board can go bad and check any fuses and connectors
I didn't understand about the one wheel should spin backwards and the other spin forward. I put one of those wiring kits in a jeep. Both wheels go backwards but switch it forward left one spins forward and the other spins backwards. That's off the ground and it's still got the high/low switch and it's not been rode yet PLEASE HELP🙏.
How can I get this car to go up hills? Tiniest hill and the car shuts off.
Needs a bigger thermal fuse because the high amp draw is tripping the unit off to protect from melting the wiring. U risk burning up the wiring but that is what the issue is
Hey i change the motor on my kids car from 12000 rpm to 30000 rpm but the car keeps turing off when the kids get in it to drive when i lift it ru es fine but under load it cut off i try'ed to remove the terminal fuse and run direct but still turing off sounds like it is clicking in the control modul what can i do to fix it
BTW awasome videoes 👌🙌
Motors want to spin 30k and are drawing too many amps. Those hi speed motors will just burn up in ride ons. I would install power wheels brand motors that spin 16k
Hello Good Evening, What could be the problem if the toy Only moves in reverse? If i put in forward it won't. If i put in reverse it will reverse. Only the forward is the problem
Not sure what model u have but it's either a shifter switch or relay in your main board
@@CustomKidzCars it could be the bluetooth receiver or its lets say reciever and the board? The motor is good i tried it.
@@CustomKidzCars the switch is also good, i really dont know 😂.
But in Switch it will reverse and in the remote control it will reverse, but if i put in forward it forward in Switch and Remote. What could be the problem? Board?
@@idodongtech6318 that would be my guess. I really don't like these cheap circuit board models. They fail very easily
i picked up a jetson and it has a Steel frame under it.....but it comes with that Weely TOTAL TRASH regulator in it. SO its about to get gutted out.......DO NOT EVER BUY WEELY regulators ive had 3 now and they are all total garbage.