Jose - thank you for the shout-out for the camp speaker drawer! Greatly appreciated. And thanks for talking about some of the other cool accessories for our vehicles. I'll definitely be checking them out.
What would be awesome would be a tray that slid into the console that was similar shape and size. The tray could have ice and few drinks placed in it. Then remove the tray and dry and clean. That console is fairly deep, so you could probably have ice and four drinks in there.
Hey Jose, well done. I appreciate how you took us through both the inside and out while giving the pros and even some cons of the options. I'm debating the running boards - while my wife isn't short, I have two young kids that need to climb up even when it's in kneel mode. I had the same phone mount from Riviparts, but mine just died. It actually melted from the heat here in NC, started to droop, and finally snapped clean off. I ended up switching to a phone mount from ProClips and so far so good. The other thing I like about this one versus the Riviparts unit I started with is that the phone mounts just a bit higher, so it's easier to see when driving. I also have the center console organizer from Twraps :) I really like the one you showed from s00nish, and I think I would get that, but there are times I need to remove it one-handed and I'm just a bit hesitant given what you showed. I saw your tonneau cover - is that a powered unit, third party, or did you get delivery of your manual already? The powered tonneau was discontinued by the time I took delivery and I haven't received my manual one yet. Anyway, looking forward to what you share with us next!
Thank you so much for watching and for the comments :) RiviParts just released a new left-side AC mount part that I ordered so we'll see if that one is better and it isn't blocked by the steering wheel. I LOVE the s00nish console but once I get my hands on the new version of TWRAPS I'll post an update about it. I am lucky and my tonneau cover still works but I pray anytime I open it haha
Sadly, the Riviparts clip - yes I had the exact same one, totally melted during the summer heat. Came out of day and the little arm with the ball on the end was dropped down facing the floorboard. I too followed Brandon Flash ‘s recommended setup. Which worked amazingly until it got over 90 degrees for several days in a row. Heartbroken 💔
I did a video on an updated Riviparts phone mount which is designed with better heat resistant filament and I’ve had it in 114° with no issues. Check it out: The Best Rivian Phone Mount Costs $15 ruclips.net/video/OjnFB3y7Hik/видео.html
Nice video! Would love to see more of this sort of thing as new products come out. I wouldnt call those running boards easy to install. I got them done but it was 6 hours, some blood and a lot of fiddling. The front mud flap and the ditch lights probably have some impact on range. I had a real hard time getting the screen protectors on without dust underneath. Ended up giving up on them.The SSD drive you can stick in the little netting in that console (where I also keep my registration) so it doesnt shake/rattle around. Seems like they should redo that floor console to move the cupholders forward just a little.
The mudflaps appear to be blocking an air passageway that was included in the truck design to help with efficiency. Have you noticed any impact to your range, or increased wind noise?
Hi there. I didn’t realize you could put those Nitto tires on the 20” rims. What size height and width are those? Any issues since they are not EV rated? They look awesome on your R1T!
Thank you! I'm actually working soon on an efficiency video of these but they are the Nitto Ridge Grappler LT275/65/R20. Overall they are heavier but much more quiet versus the standard AT Pirelli tires. I have seen quite a reduction in range but stay tuned for that video :)
Jose - thank you for the shout-out for the camp speaker drawer! Greatly appreciated. And thanks for talking about some of the other cool accessories for our vehicles. I'll definitely be checking them out.
Of course, fantastic product thank you for making it and sending it over to review!
Rivian are on point with their EVs, hope to get one soon.
They only keep getting better!
Thank you for doing this. My wife has complained about a few of the things you highlighted. Appreciate you providing links for sources for add ons.
My pleasure ☺️
Thanks for the shoutouts! The topo map on that charger is actually of Mt. Rainier - our 'home mountain.' =)
That’s awesome, keep up the amazing work!
Nice summary Jose!
Thanks!
Very nice and helpful review. Thank you!
Glad you enjoyed it!
What would be awesome would be a tray that slid into the console that was similar shape and size. The tray could have ice and few drinks placed in it. Then remove the tray and dry and clean. That console is fairly deep, so you could probably have ice and four drinks in there.
That would be pretty darn sweet!
Hi José , can you review the Yakima road shower. Thanks.
Hey Jose, well done. I appreciate how you took us through both the inside and out while giving the pros and even some cons of the options. I'm debating the running boards - while my wife isn't short, I have two young kids that need to climb up even when it's in kneel mode.
I had the same phone mount from Riviparts, but mine just died. It actually melted from the heat here in NC, started to droop, and finally snapped clean off. I ended up switching to a phone mount from ProClips and so far so good. The other thing I like about this one versus the Riviparts unit I started with is that the phone mounts just a bit higher, so it's easier to see when driving.
I also have the center console organizer from Twraps :) I really like the one you showed from s00nish, and I think I would get that, but there are times I need to remove it one-handed and I'm just a bit hesitant given what you showed.
I saw your tonneau cover - is that a powered unit, third party, or did you get delivery of your manual already? The powered tonneau was discontinued by the time I took delivery and I haven't received my manual one yet.
Anyway, looking forward to what you share with us next!
Thank you so much for watching and for the comments :)
RiviParts just released a new left-side AC mount part that I ordered so we'll see if that one is better and it isn't blocked by the steering wheel. I LOVE the s00nish console but once I get my hands on the new version of TWRAPS I'll post an update about it.
I am lucky and my tonneau cover still works but I pray anytime I open it haha
Sadly, the Riviparts clip - yes I had the exact same one, totally melted during the summer heat. Came out of day and the little arm with the ball on the end was dropped down facing the floorboard. I too followed Brandon Flash ‘s recommended setup. Which worked amazingly until it got over 90 degrees for several days in a row. Heartbroken 💔
I did a video on an updated Riviparts phone mount which is designed with better heat resistant filament and I’ve had it in 114° with no issues. Check it out:
The Best Rivian Phone Mount Costs $15
ruclips.net/video/OjnFB3y7Hik/видео.html
Nice video! Would love to see more of this sort of thing as new products come out.
I wouldnt call those running boards easy to install. I got them done but it was 6 hours, some blood and a lot of fiddling. The front mud flap and the ditch lights probably have some impact on range. I had a real hard time getting the screen protectors on without dust underneath. Ended up giving up on them.The SSD drive you can stick in the little netting in that console (where I also keep my registration) so it doesnt shake/rattle around. Seems like they should redo that floor console to move the cupholders forward just a little.
I definitely did pull a muscle putting the running boards on LOL
The mudflaps appear to be blocking an air passageway that was included in the truck design to help with efficiency. Have you noticed any impact to your range, or increased wind noise?
Not that I can tell, I’ve had them now for a few thousand miles and no noticeable efficiency issues due to the mud flaps.
Hey your seat is dirty 3:53 ..... :P Ha ha ha, great video Jose !
😅
Hi there. I didn’t realize you could put those Nitto tires on the 20” rims. What size height and width are those? Any issues since they are not EV rated? They look awesome on your R1T!
Thank you! I'm actually working soon on an efficiency video of these but they are the Nitto Ridge Grappler LT275/65/R20. Overall they are heavier but much more quiet versus the standard AT Pirelli tires. I have seen quite a reduction in range but stay tuned for that video :)
Great Video
Glad you enjoyed it
Any good roof covers to shield sun light?
It’ll be coming in my Part 2 video!
@@riviantrackr - If possible, include window shades for all windows for in-car camping.
Do you have a link to the wireless morimoto ditch lights?
Here you go: s00nish.com/products/morimoto-4banger-led-pod?variant=47276887671065
+2 cup holders? -How much liquid are y'all intaking?
Wife and I always have our waters with us but sometimes we have coffee or soda too
Please for the love of god remove those lights🤢🤢🤢🤢