How to Replace Right Rear CV Axle Assembly 2008-2017 Buick Enclave
HTML-код
- Опубликовано: 8 сен 2024
- Buy Now!
New CV Axle Assembly from 1AAuto.com 1aau.to/ia/1AAC...
New Wheel Bearing & Hub Assembly from 1AAuto.com 1aau.to/ic/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ia/1ASH...
New Wheel Bearing & Hub Assembly Set from 1AAuto.com 1aau.to/ia/1ASH...
This video shows you how to install a new right rear CV axle assembly from TRQ on your 2008-2017 Buick Enclave. A CV axle has flexible joints. Often, these joints wear out, or seize from contaminants due to the protective boot tearing open. A worn joint is prone to breakage, or other hazards. If your vehicle needs a new CV axle, install a quality TRQ axle that is engineered to your vehicle’s specifications.
This repair was done on a 2014 Buick Enclave Premium 3.6L Sport Utility 4-Door AWD Automatic and the process should be similar on the following vehicles:
2008 Buick Enclave
2009 Buick Enclave
2010 Buick Enclave
2011 Buick Enclave
2012 Buick Enclave
2013 Buick Enclave
2014 Buick Enclave
2015 Buick Enclave
2016 Buick Enclave
2017 Buick Enclave
Tools you will need:
• Pry Bar 1aau.to/o8K/1AX...
• 10mm Wrench 1aau.to/oacC/1A...
• 10mm Socket 1aau.to/obGx/1A...
• 18mm Socket
• 21mm Socket
• 22mm Socket 1aau.to/or7/1AX...
• 34mm Socket 1aau.to/oY/1AAS...
• Dead Blow Hammer
• T30 Bit
• 1/2 Inch Ratchet
• 1/4 Inch Ratchet 1aau.to/obGx/1A...
• 3/8 Inch Drive Ratchet 1aau.to/ob6T/1A...
• Torque Wrench 1aau.to/obaQ/1A...
• Gloves 1aau.to/oa4R/1A...
• Safety Glasses
• Drain Pan
• Floor Jack 1aau.to/oawY/1A...
• Jack Stands 1aau.to/oaiZ/1A...
• Wheel Chocks
Subscribe: / @trq
Check out our playlist:
Buick Enclave 1st Generation 2008-17: • Buick Enclave 1st Gene...
⚠ DISCLAIMER:
While TRQ strives to make the information provided in this video as accurate as possible, it makes no claims, promises, or guarantees about the accuracy, completeness or applicability of the content. No information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. All do-it-yourself projects entail some risk. It is the sole responsibility of the viewer to assume this risk. TRQ is not responsible or liable for any loss damage (including, but not limited to, actual, consequential, or punitive), liability, claim, or any other injury or cause related to or resulting from any information posted in this video.
√ Watch the Video
√ Buy The Part at 1A Auto 1aau.to/m/Shop-TRQ-Parts
√ Do it Yourself
√ Save Money
Should a lot of fluid come out of the differential? Would more fluid need to be added after replacing the axle?
Why not just remove the three bolts holding the knuckle on? Then you could more easily pull the axle.