How to Replace Hydro Flask Gaskets - Bottle Helpers
HTML-код
- Опубликовано: 5 июл 2024
- Bottle Helpers have specific gaskets or o-rings for each Hydro Flask bottle caps. The gasket replacement kits shown in this video are available in two places online:
1) Official Bottle Helpers Store (only $7.49 + free shipping) - Support Us and Buy Direct
Hydro Flask Wide Mouth Compatible Gaskets
www.bottlehelpers.com/collect...
2) Amazon Store ($8.99)
www.amazon.com/dp/B07F3M4PLS
Replace the old or leaky gasket or o-ring in your Hydro Flask bottle. Mildew and mold can build up in the gasket - causing strange taste in your water and not to mention the long term health hazard. Simply replace your old gasket using Bottle Helpers gasket replacement kit. It comes with 3 gaskets, pick tool, and cleaning brush. Make your water taste great again! - Хобби
was struggling to get the gasket back into place on a different brand of water bottle but this was still super handy. Just used the flat end of really anything - Personally I used the handle of a cleaned nail - clippers and it did the trick. I was kind of "chasing" a buldge in the gasket down, but it was surprisingly easier to take the whole thing out and put it back in again.
Thanks for help
thank you!
Thank you
what do you do if it isnt tight enough please help
Does it matter which way you put back the sealer? Thanks!
Where can you buy o ring
Mine was lost
How about the Gatorade Gx bottle?
Where available bottle cap rubber ring
omg I was thinking I had to put it on the outside until now thank you
Where place available gasket?
How to buy the gasket only sir 🙏pls quick rply sir
Do you send to Japan?
Do you have one Compatible to the Costco thermoflask spourt lid 24 oz?
That's a great question. It is something we are considering. But would you and buyers purchase a gasket replacement pack for $7.49 if a new costco bottle is not much more? We are hoping buyers would as it is much more environmentally friendly to just replace gaskets.
Bottle Helpers yes I would them; my family uses this water bottles
Sir ap jo b hain plz help me and tell me ye gasket kahan se lein..plz
is this the same for wide mouth flex lids too?
We have gaskets for wide mouth flex cap. See links in description
hello what is the size of the blue hydroflask bottle?
Hi - That is my Wide Mouth Hydro Flip 20oz bottle. Remember that when choosing the gasket replacement size, make sure the gasket is designed for the specific cap that you have. In this video, I replaced my Hydro Flip cap gasket. It is the first link in the description. We make gaskets for all the other wide mouth caps too.
Hey by any chance do you know which gaskets is thicker of the 3 that you sell?
Hi Rumeel12708 - we currently sell 3 models of the wide mouth gaskets on Amazon/eBay. You should choose the gaskets that fit your wide mouth cap. They should be either the Coffee Flip, Flex Cap (one with the handle), or the Straw Lid Cap.
@@bottlehelpers3043 any brick and mortar stores sell this kit?
@@jkramarz Hi Jake - Sorry but we are on Amazon and eBay only for now.
@@bottlehelpers3043 Thanks for the quick reply!
Just curious why you replace the gasket while the lid is wet? Does it ensure a proper seal? Won't the gasket be more likely to get mold or mildew? Thank you
Hi - That is a great question. The water isn't necessary to ensure a proper seal. But you are right. It might be better to dry the gasket before putting it back on. For the sake of shortening the video, I didn't do that step. I don't think it is completely necessary as I now like to remove the gasket at least once a week to clean the cap thoroughly.
Why don't you sell the different gaskets individually? Why would I want to buy a package of 6 if only 2 will fit my bottle?
Do you sell just the pick tool?
Do you sell gaskets that fit the lids for Thermos flasks too?
cleaned cap and gasket but still too tight. Took olive oil on index finger and lubricated gssket and all parts. Then....so nice how it turns open and closed.
*I have a serous question and I need the answer badly. Say if you bought a hydro flask sports cap and you wanted to change into a wide mouth could you just switch the caps or would you have to buy a whole new one ?*
The wide mouth caps are interchangeables.
Kase milega
I want gasket
Brother, when the rubber of the bottle is broken, where is the rubber found?
How to purchase rubber plz tell me also
The gasket has two sides: a flat side and a round side. When the lid is upside down(not upright when you screw on the lid) Do I place the flat side down first or the round side down? In other words, Flat side faces up to interface with the hydroflask or round side presses against the hydroflask?
This is the most important question here....
The round side goes down first so that the flat side will be pressed against the hydroflask when u put the lid back on
Bro my one is new bottle if I do upside down it leaks pls give solution
Me too
How can I find the Flex Cap gasket? I see on your Amazon page that it is listed in a picture, but I am not able to choose that size to purchase. Please advise.
Hi - We are out of stock on Amazon but have them ready to ship on bottlehelpers.com
@@bottlehelpers3043 Awesome. Thank you!
Which way does the gasket go in? Smooth side up or ridged side up???
Hi Rachel - It needs to be smooth side (flat side) against the cap. The ridge side should on hugging the lips of the bottle.