My gen 1 fbo e85 made 460/420 then I went cammed and got 510/415. My tuner has tuned 1000s plus mustangs and he said mine was like no other lol. He tweaked and tuned it. It was his project. He fell in love with it. A tuner crush.
This will be my exact setup minus long tube headers. I spoke to Zack a few weeks ago and he answered all of my questions. I'm going to work on getting some time out there to get the 2018 ported IM and have you guys install it. I currently have the Power Pack 2 so I'm get that intake manifold along with the fuel injectors to run e85. I'm so looking forward to letting you all unleash the beast.
Hello, I have Gen 2 5.0 2015 stock 3.55 Manual 6 It’s bone stock right now And daily drive Im looking forward to make some Mods such as Drop in aFe dry filter 2.5” Cat delete Gen 3 18+ Ported IM Stock mid resonator + axle back Much rwhp should i expect it makes on 93 oct ? Will i be safe pushing these mods to 7800 Rpm ?
@@automafiaracing I’ve tuned it today Mods are :- aFe cai 18+ ported IM Cat delete Tuned on 91 Oct on a dyno jet got 403 Rwhp, and the tuner said it starts falling after 6800 rpm Im thinking to make mid resonator delete with x-pipe or add also LT 1/78 headers to get benefit of 18 IM
Hit us up for a tune. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Yes we do email tuning. 📬 Contact us for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com facebook.com/automafiaracing
Question? I have a fbo gen 2 s550 with an automatic transmission how much power do you think I can achieve with your tune? And would your tune be safe or would it be using excessive timing?
about 100 diff ways. Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning. Phone: 941-979-1132 Email: Support@automafiaracing.com Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
We have them in stock. 📬 Contact AMR for build advice and guaranteed lowest prices. 📞 941-979-1132 📧 Support@AutoMafiaRacing.com www.automafiaracing.com
@@nightwolf252 we are doing what lol? This car is E85, Long Tubes, off road x pipe, 47 lb injectors, Mafia Tune, Mafia Ported 18 intake with lockouts, PMAS CAI. I think stock TB but it might have the bbk I dont remember.
Auto Mafia Racing what I tried to say was that those where awsome numbers. AND THAT YOU GUYS IN AUTO MAFIA ARE GREAT!!! TUNERS LIKE PALM BEACH DYNO HERE IN SOUTH FLORIDA THANK YOU AND BE SAFE 😄 I AM MAKING 435 with e85, no cats and intake
My gen 1 fbo e85 made 460/420 then I went cammed and got 510/415. My tuner has tuned 1000s plus mustangs and he said mine was like no other lol. He tweaked and tuned it. It was his project. He fell in love with it. A tuner crush.
Thats a happy syno
510 w cams? Ima need some details. I have a boss I’m looking to cam, what did you go with? I’m assuming you went with a CJ manifold?
Man that hp number is nice but that tq!! One of the highest ones i seen. Good stuff man!
We worked on it a ton
470whp 396 tor..pretty much same setup but I have a VMP boostapump..2015pp1..
@@pumpkinhead7103 why did you have a boostapump on a freaking fbo bolt on car?!?!?
@@pumpkinhead7103 boostapump on an n/a bolt on only 5.0? Why?
My fav coyote! 8k rpm’s 🤤Love gen 2‘s
its a good one.
@@automafiaracing would i get the same power through email tune or just dyno
@@automafiaracing and how the car now still running strong
No issues with reving out to 8k on stock valve train?
None
464 is an amazing number for gen 2. Might have to pay your tuner a visit! 😂
Come on down to the shop
@@automafiaracing where is this shop located
Arcadia, FL.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
Same here🔥🔥🔥
This will be my exact setup minus long tube headers. I spoke to Zack a few weeks ago and he answered all of my questions. I'm going to work on getting some time out there to get the 2018 ported IM and have you guys install it. I currently have the Power Pack 2 so I'm get that intake manifold along with the fuel injectors to run e85. I'm so looking forward to letting you all unleash the beast.
Sounds like a great plan!!!
Thank you AMR, I really feel it when I watch this.
Feel it
Nice to see a coyote doing it's thing. I'm gonna have to get my gen 3's power up now lol
yeah she rips
Impressive, you guys do good work....
Thanks
Needs the driver mod.... bouncing off the rev limiter between shifts.
She's quick still!
Will it lock you outta the next gear if you try to shift after hitting redline?
no
Where do you get gt350 front that fits and paint match ?
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Just have 1 question about your tunes. For automatics do you guys also wake up the transmission? Or are your tunes engine focused?
Yes all our tunes include Trans tuning if they are automatics.
Sounds like a NASCAR. Awesome
its pretty good
Hello,
I have Gen 2 5.0 2015 stock 3.55 Manual 6
It’s bone stock right now
And daily drive
Im looking forward to make some Mods such as
Drop in aFe dry filter
2.5” Cat delete
Gen 3 18+ Ported IM
Stock mid resonator + axle back
Much rwhp should i expect it makes on 93 oct ?
Will i be safe pushing these mods to 7800 Rpm ?
Depends on fuel and the tune. low 400s probably. Grab a tune from us at AMR! automafiaracing.com/collections/tuning
@@automafiaracing
I’ve tuned it today
Mods are :-
aFe cai
18+ ported IM
Cat delete
Tuned on 91 Oct on a dyno jet got 403 Rwhp, and the tuner said it starts falling after 6800 rpm
Im thinking to make mid resonator delete with x-pipe or add also LT 1/78 headers to get benefit of 18 IM
Hit us up for a tune.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Could mafia tune do email tune? Or are y’all strictly a in person dyno tuned company?
Yes we do email tuning.
📬 Contact us for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com
facebook.com/automafiaracing
I made 420 hp with Lund 😒 I’m full bolt on as well with ported intake manifold. I have a auto
Feel free to hit us up for a tune
Auto Mafia Racing what’s your email ?
With e85
Cool
E85 or 93? Asking bc I have an Auto as well . Im waiting for my manifold, after I will be full bolt on as well
In your opinion would the cj manifold make any more power?
A ported cj would make a little more at the top probably yes
what type of fuel pump did he ended up getting
DW400 automafiaracing.com/products/deatschwerks-415lph-dw400-in-tank-fuel-pump-w-install-kit
Those are some awesome wheels! What are they?
Not sure. Niche I think
Question? I have a fbo gen 2 s550 with an automatic transmission how much power do you think I can achieve with your tune? And would your tune be safe or would it be using excessive timing?
Yes our tunes are perfectly safe. automafiaracing.com/collections/tuning
They good man. I run e85 on my 10 speed thru them. Very clean tune
Thank you
I already have Lund I was just wondering that if I went in person to do a dyno tune if it would be possible to hit those numbers
To us in person on our dyno with same fuel and same mods probably
do pbd i’ve seen cars put up 498 to 515 wheel
No one is getting 500 without cams and a CJ. We love the guys at PBD but it just doesnt happen NA.
47lb injectors? Are you sure those were big enough? Im thinking I need 80s for this exact setup hmmm
Plenty big enough for an NA car
Wish your tuner could touch my coyote but I'm all the way in Texas🥲
We tune worldwide via email
@@automafiaracing how much do yall charge to email tune over a SCT tuner?
$250
How do I get Ahold of y’all.
I have a 2012 mustang boss 302 fbo it’s already tune but I would like y’all to tune it for me
about 100 diff ways.
Feel Free to Message us with any questions if you need advice or a quote on any parts, builds, installs, or dyno, email tuning.
Phone: 941-979-1132
Email: Support@automafiaracing.com
Here is a link to our Facebook Page. Link: facebook.com/automafiaracing
So I need a ported intake manifold...
We have them in stock.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Have you ever done a FBO 3.7 with E85? If so what kind of power did it make?
yes a little over 300. on race gas we got ours FBO NA to 328 rwhp which to my knowledge is the highest anyone has gotten
How far u from Jacksonville Florida
couple hrs
@@automafiaracing you tune stock car
What cat-back system does this stang have on it
dont remember
what cold air intake is that?
Pmas
What’s the tires size and name brand?
youd have to ask him on instagram.
pretty sure they were 305s and nittos
What spoiler does he have? Sick coyote.
note sure
I need that type of torque on my 5.0😩
Don't we all
Can u guys tune fbo my gen2 ??
Of course.
📬 Contact AMR for build advice and guaranteed lowest prices.
📞 941-979-1132
📧 Support@AutoMafiaRacing.com www.automafiaracing.com
Estimates on 1/4 mile time ?
Low 12s high 11s
Where are u guys located
Arcadia, FL
SAE or STD?
std
Why do different long tube headers make different amount of horsepower?
different designs and sizing of pipes.
What rims are those
Niche I think
Niche Gamma M191s matte bronze. I know cuz i just ordered some for my car haha
Almost have same mods with him but i got gen1, how much gains am i looking if i go amr flexfuel tune? Location is Hawaii.
Probably a tad less
What would a car with this kind of power would run down the track 1/4? **An estimate** I know there are a few other factors besides power.
Should be low 11s high 10s
What gears is he running?
3.73
Is this automatic?
No
What are the mods ?
FBO
You guys fucking real tuners just like palm beach
@@nightwolf252 we are doing what lol? This car is E85, Long Tubes, off road x pipe, 47 lb injectors, Mafia Tune, Mafia Ported 18 intake with lockouts, PMAS CAI. I think stock TB but it might have the bbk I dont remember.
Auto Mafia Racing what I tried to say was that those where awsome numbers. AND THAT YOU GUYS IN AUTO MAFIA ARE GREAT!!! TUNERS LIKE PALM BEACH DYNO HERE IN SOUTH FLORIDA
THANK YOU AND BE SAFE 😄
I AM MAKING 435 with e85, no cats and intake
@@nightwolf252 well thank you! We work hard! Sounds like you have a ripper too
Do you offer remote tuning? Haha
We do :)
My sister can shift better than that😂power shifting is so bad for the trans too , especially this slow
lol
Fuck them fuel pumps
lol what
It's cute but not a ls killer lol bare mods to a ls will eat that 5.0
LoL an LS would need heads, cam, intake TB full exhaust and more to even keep up
@@automafiaracing no it wouldn't.
Lol that seems low. A fbo gen2 car on E85 and a ported mani should make 480whp
Weve never had one make 480..NA. no matter if it was pbd or lund or vmp or whoever tuned.
Just add a supercharger and be done.
Thats what we said
@@automafiaracing Not everyone wants to deal with boost.
We know. Some people like slow cars... ;)
@@charlesmeaux3954 what is there to deal with????? Smiling to much??
@@carguy... For real, Boost is where E85 really shows its pure nastiness
Would you recommend oil pump gears for FBO?
If you want to rev it past 8k and manual 1000%
@@automafiaracing what is i keep the rev limiter at 7000-7500? And yes manual
Id still recommend for that extra safety.